Message ID | 20230227131042.16125-3-walker.chen@starfivetech.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add DMA driver for StarFive JH7110 SoC | expand |
Context | Check | Description |
---|---|---|
conchuod/tree_selection | fail | Failed to apply to next/pending-fixes or riscv/for-next |
On Mon, 27 Feb 2023 at 14:11, Walker Chen <walker.chen@starfivetech.com> wrote: > > Add DMA reset operation in device probe and use different configuration > on CH_CFG registers according to match data. > > Signed-off-by: Walker Chen <walker.chen@starfivetech.com> > Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Hi Walker, Firstly your Signed-off-by should be the last line. I may have been unclear in my last review, sorry. I meant to give my reviewed-by if you just removed the reset pointer that was never used. This new version also adds a lot of new code. Though, I'm glad you want to update the driver to use match data rather than of_device_is_compatible, but then please update all uses of of_device_is_compatible. With this patch starfive uses match data and the intel,kmb-axi-dma still uses of_device_is_compatible. More comments below.. > --- > .../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 34 +++++++++++++++++-- > drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 7 ++++ > 2 files changed, 39 insertions(+), 2 deletions(-) > > diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c > index bf85aa0979ec..400eeef707bf 100644 > --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c > +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c > @@ -21,10 +21,12 @@ > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/of.h> > +#include <linux/of_device.h> > #include <linux/of_dma.h> > #include <linux/platform_device.h> > #include <linux/pm_runtime.h> > #include <linux/property.h> > +#include <linux/reset.h> > #include <linux/slab.h> > #include <linux/types.h> > > @@ -86,7 +88,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan, > > cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS | > config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS); > - if (chan->chip->dw->hdata->reg_map_8_channels) { > + if (chan->chip->dw->hdata->reg_map_8_channels && > + !chan->chip->dw->hdata->use_cfg2) { > cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS | > config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS | > config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS | > @@ -1142,7 +1145,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan) > axi_chan_disable(chan); > > ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val, > - !(val & chan_active), 1000, 10000); > + !(val & chan_active), 1000, DMAC_TIMEOUT_US); > if (ret == -ETIMEDOUT) > dev_warn(dchan2dev(dchan), > "%s failed to stop\n", axi_chan_name(chan)); > @@ -1367,6 +1370,17 @@ static int parse_device_properties(struct axi_dma_chip *chip) > return 0; > } > > +static int jh7110_rst_init(struct platform_device *pdev) > +{ > + struct reset_control *resets; > + > + resets = devm_reset_control_array_get_exclusive(&pdev->dev); > + if (IS_ERR(resets)) > + return PTR_ERR(resets); > + > + return reset_control_deassert(resets); > +} > + > static int dw_probe(struct platform_device *pdev) > { > struct device_node *node = pdev->dev.of_node; > @@ -1374,6 +1388,7 @@ static int dw_probe(struct platform_device *pdev) > struct resource *mem; > struct dw_axi_dma *dw; > struct dw_axi_dma_hcfg *hdata; > + const struct axi_dma_chip_config *ccfg; > u32 i; > int ret; > > @@ -1416,6 +1431,15 @@ static int dw_probe(struct platform_device *pdev) > if (IS_ERR(chip->cfgr_clk)) > return PTR_ERR(chip->cfgr_clk); > > + ccfg = of_device_get_match_data(&pdev->dev); > + if (ccfg) { > + ret = ccfg->rst_init(pdev); > + if (ret) > + return ret; > + > + chip->dw->hdata->use_cfg2 = ccfg->use_cfg2; > + } > + > ret = parse_device_properties(chip); > if (ret) > return ret; > @@ -1557,9 +1581,15 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = { > SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL) > }; > > +static const struct axi_dma_chip_config jh7110_chip_config = { > + .rst_init = jh7110_rst_init, > + .use_cfg2 = true, > +}; > + > static const struct of_device_id dw_dma_of_id_table[] = { > { .compatible = "snps,axi-dma-1.01a" }, > { .compatible = "intel,kmb-axi-dma" }, > + { .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config }, > {} > }; > MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); > diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h > index e9d5eb0fd594..7b404ae9a26a 100644 > --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h > +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h > @@ -21,6 +21,7 @@ > #define DMAC_MAX_CHANNELS 16 > #define DMAC_MAX_MASTERS 2 > #define DMAC_MAX_BLK_SIZE 0x200000 > +#define DMAC_TIMEOUT_US 200000 > > struct dw_axi_dma_hcfg { > u32 nr_channels; > @@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg { > /* Register map for DMAX_NUM_CHANNELS <= 8 */ > bool reg_map_8_channels; > bool restrict_axi_burst_len; > + bool use_cfg2; > }; > > struct axi_dma_chan { > @@ -72,6 +74,11 @@ struct axi_dma_chip { > struct dw_axi_dma *dw; > }; > > +struct axi_dma_chip_config { > + int (*rst_init)(struct platform_device *pdev); Please just spell reset in full, it's not that much longer. > + bool use_cfg2; > +}; > + This struct is only used in dw-axi-dmac-platform.c above, so no need to add it here. > /* LLI == Linked List Item */ > struct __packed axi_dma_lli { > __le64 sar; > -- > 2.17.1 >
On 2023/2/27 21:47, Emil Renner Berthing wrote: > On Mon, 27 Feb 2023 at 14:11, Walker Chen <walker.chen@starfivetech.com> wrote: >> >> Add DMA reset operation in device probe and use different configuration >> on CH_CFG registers according to match data. >> >> Signed-off-by: Walker Chen <walker.chen@starfivetech.com> >> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> > > Hi Walker, > > Firstly your Signed-off-by should be the last line. > > I may have been unclear in my last review, sorry. I meant to give my > reviewed-by if you just removed the reset pointer that was never used. > This new version also adds a lot of new code. > > Though, I'm glad you want to update the driver to use match data > rather than of_device_is_compatible, but then please update all uses > of of_device_is_compatible. With this patch starfive uses match data > and the intel,kmb-axi-dma still uses of_device_is_compatible. Hey Emil, thank you for pointing out these problems for me. Will be fixed. > More comments below.. > >> --- >> .../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 34 +++++++++++++++++-- >> drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 7 ++++ >> 2 files changed, 39 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c >> index bf85aa0979ec..400eeef707bf 100644 >> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c >> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c >> @@ -21,10 +21,12 @@ >> #include <linux/kernel.h> >> #include <linux/module.h> >> #include <linux/of.h> >> +#include <linux/of_device.h> >> #include <linux/of_dma.h> >> #include <linux/platform_device.h> >> #include <linux/pm_runtime.h> >> #include <linux/property.h> >> +#include <linux/reset.h> >> #include <linux/slab.h> >> #include <linux/types.h> >> >> @@ -86,7 +88,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan, >> >> cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS | >> config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS); >> - if (chan->chip->dw->hdata->reg_map_8_channels) { >> + if (chan->chip->dw->hdata->reg_map_8_channels && >> + !chan->chip->dw->hdata->use_cfg2) { >> cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS | >> config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS | >> config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS | >> @@ -1142,7 +1145,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan) >> axi_chan_disable(chan); >> >> ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val, >> - !(val & chan_active), 1000, 10000); >> + !(val & chan_active), 1000, DMAC_TIMEOUT_US); >> if (ret == -ETIMEDOUT) >> dev_warn(dchan2dev(dchan), >> "%s failed to stop\n", axi_chan_name(chan)); >> @@ -1367,6 +1370,17 @@ static int parse_device_properties(struct axi_dma_chip *chip) >> return 0; >> } >> >> +static int jh7110_rst_init(struct platform_device *pdev) >> +{ >> + struct reset_control *resets; >> + >> + resets = devm_reset_control_array_get_exclusive(&pdev->dev); >> + if (IS_ERR(resets)) >> + return PTR_ERR(resets); >> + >> + return reset_control_deassert(resets); >> +} >> + >> static int dw_probe(struct platform_device *pdev) >> { >> struct device_node *node = pdev->dev.of_node; >> @@ -1374,6 +1388,7 @@ static int dw_probe(struct platform_device *pdev) >> struct resource *mem; >> struct dw_axi_dma *dw; >> struct dw_axi_dma_hcfg *hdata; >> + const struct axi_dma_chip_config *ccfg; >> u32 i; >> int ret; >> >> @@ -1416,6 +1431,15 @@ static int dw_probe(struct platform_device *pdev) >> if (IS_ERR(chip->cfgr_clk)) >> return PTR_ERR(chip->cfgr_clk); >> >> + ccfg = of_device_get_match_data(&pdev->dev); >> + if (ccfg) { >> + ret = ccfg->rst_init(pdev); >> + if (ret) >> + return ret; >> + >> + chip->dw->hdata->use_cfg2 = ccfg->use_cfg2; >> + } >> + >> ret = parse_device_properties(chip); >> if (ret) >> return ret; >> @@ -1557,9 +1581,15 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = { >> SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL) >> }; >> >> +static const struct axi_dma_chip_config jh7110_chip_config = { >> + .rst_init = jh7110_rst_init, >> + .use_cfg2 = true, >> +}; >> + >> static const struct of_device_id dw_dma_of_id_table[] = { >> { .compatible = "snps,axi-dma-1.01a" }, >> { .compatible = "intel,kmb-axi-dma" }, >> + { .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config }, >> {} >> }; >> MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); >> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h >> index e9d5eb0fd594..7b404ae9a26a 100644 >> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h >> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h >> @@ -21,6 +21,7 @@ >> #define DMAC_MAX_CHANNELS 16 >> #define DMAC_MAX_MASTERS 2 >> #define DMAC_MAX_BLK_SIZE 0x200000 >> +#define DMAC_TIMEOUT_US 200000 >> >> struct dw_axi_dma_hcfg { >> u32 nr_channels; >> @@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg { >> /* Register map for DMAX_NUM_CHANNELS <= 8 */ >> bool reg_map_8_channels; >> bool restrict_axi_burst_len; >> + bool use_cfg2; >> }; >> >> struct axi_dma_chan { >> @@ -72,6 +74,11 @@ struct axi_dma_chip { >> struct dw_axi_dma *dw; >> }; >> >> +struct axi_dma_chip_config { >> + int (*rst_init)(struct platform_device *pdev); > > Please just spell reset in full, it's not that much longer. Okay, this will be modified. > >> + bool use_cfg2; >> +}; >> + > > This struct is only used in dw-axi-dmac-platform.c above, so no need > to add it here. Okay, will be fixed. Thank you very much for your review and comment! Best regards, Walker
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c index bf85aa0979ec..400eeef707bf 100644 --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c @@ -21,10 +21,12 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/of_dma.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/property.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/types.h> @@ -86,7 +88,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan, cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS | config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS); - if (chan->chip->dw->hdata->reg_map_8_channels) { + if (chan->chip->dw->hdata->reg_map_8_channels && + !chan->chip->dw->hdata->use_cfg2) { cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS | config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS | config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS | @@ -1142,7 +1145,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan) axi_chan_disable(chan); ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val, - !(val & chan_active), 1000, 10000); + !(val & chan_active), 1000, DMAC_TIMEOUT_US); if (ret == -ETIMEDOUT) dev_warn(dchan2dev(dchan), "%s failed to stop\n", axi_chan_name(chan)); @@ -1367,6 +1370,17 @@ static int parse_device_properties(struct axi_dma_chip *chip) return 0; } +static int jh7110_rst_init(struct platform_device *pdev) +{ + struct reset_control *resets; + + resets = devm_reset_control_array_get_exclusive(&pdev->dev); + if (IS_ERR(resets)) + return PTR_ERR(resets); + + return reset_control_deassert(resets); +} + static int dw_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; @@ -1374,6 +1388,7 @@ static int dw_probe(struct platform_device *pdev) struct resource *mem; struct dw_axi_dma *dw; struct dw_axi_dma_hcfg *hdata; + const struct axi_dma_chip_config *ccfg; u32 i; int ret; @@ -1416,6 +1431,15 @@ static int dw_probe(struct platform_device *pdev) if (IS_ERR(chip->cfgr_clk)) return PTR_ERR(chip->cfgr_clk); + ccfg = of_device_get_match_data(&pdev->dev); + if (ccfg) { + ret = ccfg->rst_init(pdev); + if (ret) + return ret; + + chip->dw->hdata->use_cfg2 = ccfg->use_cfg2; + } + ret = parse_device_properties(chip); if (ret) return ret; @@ -1557,9 +1581,15 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = { SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL) }; +static const struct axi_dma_chip_config jh7110_chip_config = { + .rst_init = jh7110_rst_init, + .use_cfg2 = true, +}; + static const struct of_device_id dw_dma_of_id_table[] = { { .compatible = "snps,axi-dma-1.01a" }, { .compatible = "intel,kmb-axi-dma" }, + { .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config }, {} }; MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h index e9d5eb0fd594..7b404ae9a26a 100644 --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h @@ -21,6 +21,7 @@ #define DMAC_MAX_CHANNELS 16 #define DMAC_MAX_MASTERS 2 #define DMAC_MAX_BLK_SIZE 0x200000 +#define DMAC_TIMEOUT_US 200000 struct dw_axi_dma_hcfg { u32 nr_channels; @@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg { /* Register map for DMAX_NUM_CHANNELS <= 8 */ bool reg_map_8_channels; bool restrict_axi_burst_len; + bool use_cfg2; }; struct axi_dma_chan { @@ -72,6 +74,11 @@ struct axi_dma_chip { struct dw_axi_dma *dw; }; +struct axi_dma_chip_config { + int (*rst_init)(struct platform_device *pdev); + bool use_cfg2; +}; + /* LLI == Linked List Item */ struct __packed axi_dma_lli { __le64 sar;