| Message ID | 20230303085928.4535-13-samin.guo@starfivetech.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Ethernet driver for StarFive JH7110 SoC | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/tree_selection | fail | Failed to apply to next/pending-fixes or riscv/for-next |
On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@starfivetech.com> wrote: > From: Yanhong Wang <yanhong.wang@starfivetech.com> > > Update gmac device tree node status to okay. > > Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> > Signed-off-by: Samin Guo <samin.guo@starfivetech.com> > --- > .../dts/starfive/jh7110-starfive-visionfive-2.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > index c2aa8946a0f1..d1c409f40014 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > @@ -12,6 +12,8 @@ > / { > aliases { > serial0 = &uart0; > + ethernet0 = &gmac0; > + ethernet1 = &gmac1; Please sort these alphabetically. > i2c0 = &i2c0; > i2c2 = &i2c2; > i2c5 = &i2c5; > @@ -92,6 +94,14 @@ > status = "okay"; > }; > > +&gmac0 { > + status = "okay"; > +}; > + > +&gmac1 { > + status = "okay"; > +}; Since you'll need to add to the gmac0 and gmac1 nodes in the board specific files too and it's only one line, consider just dropping this here and add the status = "okay" there instead. > &i2c0 { > clock-frequency = <100000>; > i2c-sda-hold-time-ns = <300>; > -- > 2.17.1 > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv
在 2023/3/6 21:04:28, Emil Renner Berthing 写道: > On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@starfivetech.com> wrote: >> From: Yanhong Wang <yanhong.wang@starfivetech.com> >> >> Update gmac device tree node status to okay. >> >> Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> >> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> >> --- >> .../dts/starfive/jh7110-starfive-visionfive-2.dtsi | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> >> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> index c2aa8946a0f1..d1c409f40014 100644 >> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> @@ -12,6 +12,8 @@ >> / { >> aliases { >> serial0 = &uart0; >> + ethernet0 = &gmac0; >> + ethernet1 = &gmac1; > > Please sort these alphabetically. Thanks, will fix. > >> i2c0 = &i2c0; >> i2c2 = &i2c2; >> i2c5 = &i2c5; >> @@ -92,6 +94,14 @@ >> status = "okay"; >> }; >> >> +&gmac0 { >> + status = "okay"; >> +}; >> + >> +&gmac1 { >> + status = "okay"; >> +}; > > Since you'll need to add to the gmac0 and gmac1 nodes in the board > specific files too and it's only one line, consider just dropping this > here and add the status = "okay" there instead. > According to Andrew's suggestion, can I put the nodes of mdio and phy here? >> &i2c0 { >> clock-frequency = <100000>; >> i2c-sda-hold-time-ns = <300>; >> -- >> 2.17.1 >> >> >> _______________________________________________ >> linux-riscv mailing list >> linux-riscv@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-riscv Best regards, Samin
On Tue, 7 Mar 2023 at 02:21, Guo Samin <samin.guo@starfivetech.com> wrote: > 在 2023/3/6 21:04:28, Emil Renner Berthing 写道: > > On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@starfivetech.com> wrote: > >> From: Yanhong Wang <yanhong.wang@starfivetech.com> > >> > >> Update gmac device tree node status to okay. > >> > >> Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> > >> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> > >> --- > >> .../dts/starfive/jh7110-starfive-visionfive-2.dtsi | 10 ++++++++++ > >> 1 file changed, 10 insertions(+) > >> > >> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > >> index c2aa8946a0f1..d1c409f40014 100644 > >> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > >> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > >> @@ -12,6 +12,8 @@ > >> / { > >> aliases { > >> serial0 = &uart0; > >> + ethernet0 = &gmac0; > >> + ethernet1 = &gmac1; > > > > Please sort these alphabetically. > Thanks, will fix. > > > >> i2c0 = &i2c0; > >> i2c2 = &i2c2; > >> i2c5 = &i2c5; > >> @@ -92,6 +94,14 @@ > >> status = "okay"; > >> }; > >> > >> +&gmac0 { > >> + status = "okay"; > >> +}; > >> + > >> +&gmac1 { > >> + status = "okay"; > >> +}; > > > > Since you'll need to add to the gmac0 and gmac1 nodes in the board > > specific files too and it's only one line, consider just dropping this > > here and add the status = "okay" there instead. > > > According to Andrew's suggestion, can I put the nodes of mdio and phy here? Yeah, if the boards then end up sharing more information it's fine to put it here. It just seemed a little much to add 8 lines here when all the boards shared was a status = "okay"; > >> &i2c0 { > >> clock-frequency = <100000>; > >> i2c-sda-hold-time-ns = <300>; > >> -- > >> 2.17.1 > >> > >> > >> _______________________________________________ > >> linux-riscv mailing list > >> linux-riscv@lists.infradead.org > >> http://lists.infradead.org/mailman/listinfo/linux-riscv > > Best regards, > Samin > -- > Best regards, > Samin
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index c2aa8946a0f1..d1c409f40014 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -12,6 +12,8 @@ / { aliases { serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; i2c0 = &i2c0; i2c2 = &i2c2; i2c5 = &i2c5; @@ -92,6 +94,14 @@ status = "okay"; }; +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "okay"; +}; + &i2c0 { clock-frequency = <100000>; i2c-sda-hold-time-ns = <300>;