diff mbox series

[v2,2/3] usb: cdns3: add StarFive JH7110 USB glue layer

Message ID 20230308082800.3008-3-minda.chen@starfivetech.com (mailing list archive)
State Handled Elsewhere
Headers show
Series Add JH7110 USB driver support | expand

Checks

Context Check Description
conchuod/tree_selection fail Failed to apply to next/pending-fixes or riscv/for-next

Commit Message

Minda Chen March 8, 2023, 8:27 a.m. UTC 
There is a Cadence USB3 core for JH7110 SoCs, the cdns
core is the child for this glue layer device.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
 MAINTAINERS                        |   7 +
 drivers/usb/cdns3/Kconfig          |  11 +
 drivers/usb/cdns3/Makefile         |   1 +
 drivers/usb/cdns3/cdns3-starfive.c | 374 +++++++++++++++++++++++++++++
 4 files changed, 393 insertions(+)
 create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 47a3dd16b59b..20a64fa39a14 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19970,6 +19970,13 @@  M:	William Qiu <william.qiu@starfivetech.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/soc/starfive/jh7110-syscon.yaml
 
+STARFIVE JH71X0 USB PHY DRIVERS
+M:	Emil Renner Berthing <kernel@esmil.dk>
+M:	Minda Chen <minda.chen@starfivetech.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb*.yaml
+F:	drivers/usb/cdns3/cdns3-starfive.c
+
 STATIC BRANCH/CALL
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Josh Poimboeuf <jpoimboe@kernel.org>
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
index b98ca0a1352a..0a514b591527 100644
--- a/drivers/usb/cdns3/Kconfig
+++ b/drivers/usb/cdns3/Kconfig
@@ -78,6 +78,17 @@  config USB_CDNS3_IMX
 
 	  For example, imx8qm and imx8qxp.
 
+config USB_CDNS3_STARFIVE
+	tristate "Cadence USB3 support on StarFive SoC platforms"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	help
+	  Say 'Y' or 'M' here if you are building for StarFive SoCs
+	  platforms that contain Cadence USB3 controller core.
+
+	  e.g. JH7110.
+
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called cdns3-starfive.ko
 endif
 
 if USB_CDNS_SUPPORT
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
index 61edb2f89276..48dfae75b5aa 100644
--- a/drivers/usb/cdns3/Makefile
+++ b/drivers/usb/cdns3/Makefile
@@ -24,6 +24,7 @@  endif
 obj-$(CONFIG_USB_CDNS3_PCI_WRAP)		+= cdns3-pci-wrap.o
 obj-$(CONFIG_USB_CDNS3_TI)			+= cdns3-ti.o
 obj-$(CONFIG_USB_CDNS3_IMX)			+= cdns3-imx.o
+obj-$(CONFIG_USB_CDNS3_STARFIVE)		+= cdns3-starfive.o
 
 cdnsp-udc-pci-y					:= cdnsp-pci.o
 
diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
new file mode 100644
index 000000000000..9b80be29ac0d
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-starfive.c
@@ -0,0 +1,374 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2022 Starfive, Inc.
+ * Author:	Yanhong Wang <yanhong.wang@starfivetech.com>
+ * Author:	Mason Huo <mason.huo@starfivetech.com>
+ * Author:	Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/usb/otg.h>
+#include "core.h"
+
+#define USB_STRAP_HOST			BIT(17)
+#define USB_STRAP_DEVICE		BIT(18)
+#define USB_STRAP_MASK			GENMASK(18, 16)
+
+#define USB_SUSPENDM_HOST		BIT(19)
+#define USB_SUSPENDM_DEVICE		(0 << 19)
+#define USB_SUSPENDM_MASK		BIT(19)
+
+#define USB_SUSPENDM_BYPS		BIT(20)
+#define USB_REFCLK_MODE			BIT(23)
+#define USB_PLL_EN			BIT(22)
+#define USB_PDRSTN_SPLIT		BIT(17)
+
+#define PCIE_CKREF_SRC_MASK		GENMASK(19, 18)
+#define PCIE_CLK_SEL_MASK		GENMASK(21, 20)
+#define PCIE_PHY_MODE			BIT(20)
+#define PCIE_PHY_MODE_MASK		GENMASK(21, 20)
+#define PCIE_USB3_BUS_WIDTH_MASK	GENMASK(3, 2)
+#define PCIE_USB3_RATE_MASK		GENMASK(6, 5)
+#define PCIE_USB3_RX_STANDBY_MASK	BIT(7)
+#define PCIE_USB3_PHY_ENABLE		BIT(4)
+#define PCIE_USB3_PHY_PLL_CTL_OFF	(0x1f * 4)
+
+#define USB_125M_CLK_RATE		125000000
+
+#define USB_LS_KEEPALIVE_OFF		0x4
+#define USB_LS_KEEPALIVE_ENABLE		BIT(4)
+
+#define USB3_DOWN_SS_MODE		BIT(4)
+
+struct cdns_starfive {
+	struct device *dev;
+	struct regmap *stg_syscon;
+	struct regmap *sys_syscon;
+	struct reset_control *resets;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	struct clk *usb_125m_clk;
+	u32 sys_offset;
+	u32 stg_offset_4;
+	u32 stg_offset_196;
+	u32 stg_offset_328;
+	u32 stg_offset_500;
+	bool usb2_only;
+	enum usb_dr_mode mode;
+	void __iomem *phybase_20;
+	void __iomem *phybase_30;
+};
+
+static int cdns_mode_init(struct platform_device *pdev,
+				struct cdns_starfive *data)
+{
+	enum usb_dr_mode mode;
+
+	/* Init usb 2.0 utmi phy */
+	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+		USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
+	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+		USB_PLL_EN, USB_PLL_EN);
+	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+		USB_REFCLK_MODE, USB_REFCLK_MODE);
+
+	if (data->usb2_only) {
+		/* Disconnect usb 3.0 phy mode */
+		regmap_update_bits(data->sys_syscon, data->sys_offset,
+			USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
+	} else {
+		/* Config usb 3.0 pipe phy */
+		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
+			PCIE_CKREF_SRC_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
+			PCIE_CLK_SEL_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_328,
+			PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_BUS_WIDTH_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_RATE_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_RX_STANDBY_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
+
+		/* Connect usb 3.0 phy mode */
+		regmap_update_bits(data->sys_syscon, data->sys_offset,
+			USB_PDRSTN_SPLIT, 0);
+	}
+	mode = usb_get_dr_mode(&pdev->dev);
+	data->mode = mode;
+
+	switch (mode) {
+	case USB_DR_MODE_HOST:
+		regmap_update_bits(data->stg_syscon,
+			data->stg_offset_4,
+			USB_STRAP_MASK,
+			USB_STRAP_HOST);
+		regmap_update_bits(data->stg_syscon,
+			data->stg_offset_4,
+			USB_SUSPENDM_MASK,
+			USB_SUSPENDM_HOST);
+		break;
+
+	case USB_DR_MODE_PERIPHERAL:
+		regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+			USB_STRAP_MASK, USB_STRAP_DEVICE);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+			USB_SUSPENDM_MASK, USB_SUSPENDM_DEVICE);
+		break;
+
+	case USB_DR_MODE_UNKNOWN:
+	case USB_DR_MODE_OTG:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int cdns_clk_rst_init(struct cdns_starfive *data)
+{
+	int ret;
+
+	data->usb_125m_clk = devm_clk_get(data->dev, "usb_125m");
+	if (IS_ERR(data->usb_125m_clk))
+		return dev_err_probe(data->dev, PTR_ERR(data->usb_125m_clk),
+			"Failed to get 125m clock\n");
+
+	data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
+	if (data->num_clks < 0)
+		return dev_err_probe(data->dev, -ENODEV,
+			"Failed to get clocks\n");
+
+	/* Needs to set the USB_125M clock explicitly,
+	 * since it's divided from pll0 clock, and the pll0 clock
+	 * changes per the cpu frequency.
+	 */
+	ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
+	if (ret)
+		return dev_err_probe(data->dev, ret,
+			"Failed to set 125m clocks\n");
+
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret)
+		return dev_err_probe(data->dev, ret,
+			"failed to enable clocks\n");
+
+	data->resets = devm_reset_control_array_get_exclusive(data->dev);
+	if (IS_ERR(data->resets)) {
+		ret = dev_err_probe(data->dev, PTR_ERR(data->resets),
+			"Failed to get resets");
+		goto err_clk_init;
+	}
+
+	ret = reset_control_deassert(data->resets);
+	if (ret) {
+		ret = dev_err_probe(data->dev, ret,
+			"failed to reset clocks\n");
+		goto err_clk_init;
+	}
+
+	return ret;
+
+err_clk_init:
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	return ret;
+}
+
+static void cdns_starfive_set_phy(struct cdns_starfive *data)
+{
+	unsigned int val;
+
+	if (data->mode != USB_DR_MODE_PERIPHERAL) {
+		/* Enable the LS speed keep-alive signal */
+		val = readl(data->phybase_20 + USB_LS_KEEPALIVE_OFF);
+		val |= USB_LS_KEEPALIVE_ENABLE;
+		writel(val, data->phybase_20 + USB_LS_KEEPALIVE_OFF);
+	}
+
+	/* Configuare spread-spectrum mode: down-spread-spectrum */
+	if (!data->usb2_only)
+		writel(USB3_DOWN_SS_MODE, data->phybase_30 + PCIE_USB3_PHY_PLL_CTL_OFF);
+}
+
+static int cdns_starfive_phy_init(struct platform_device *pdev,
+							struct cdns_starfive *data)
+{
+	struct device *dev = &pdev->dev;
+
+	data->phybase_20 = devm_platform_ioremap_resource_byname(pdev, "usb2");
+	if (IS_ERR(data->phybase_20))
+		return dev_err_probe(dev, PTR_ERR(data->phybase_20),
+			"Can't map phybase_20 IOMEM resource\n");
+
+	data->phybase_30 = devm_platform_ioremap_resource_byname(pdev, "usb3");
+	if (IS_ERR(data->phybase_30))
+		return dev_err_probe(dev, PTR_ERR(data->phybase_30),
+			"Can't map phybase_30 IOMEM resource\n");
+
+	cdns_starfive_set_phy(data);
+
+	return 0;
+}
+
+static int cdns_starfive_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct cdns_starfive *data;
+	unsigned int args[4];
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	data->dev = dev;
+
+	data->usb2_only = device_property_read_bool(dev, "starfive,usb2-only");
+	data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
+		"starfive,stg-syscon", 4, args);
+
+	if (IS_ERR(data->stg_syscon))
+		return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
+			"Failed to parse starfive,stg-syscon\n");
+
+	data->stg_offset_4 = args[0];
+	data->stg_offset_196 = args[1];
+	data->stg_offset_328 = args[2];
+	data->stg_offset_500 = args[3];
+
+	data->sys_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
+		"starfive,sys-syscon", 1, args);
+	if (IS_ERR(data->sys_syscon))
+		return dev_err_probe(dev, PTR_ERR(data->sys_syscon),
+			"Failed to parse starfive,sys-syscon\n");
+
+	data->sys_offset = args[0];
+
+	cdns_mode_init(pdev, data);
+
+	ret = cdns_clk_rst_init(data);
+	if (ret)
+		return ret;
+
+	ret = cdns_starfive_phy_init(pdev, data);
+	if (ret)
+		return ret;
+
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to create children\n");
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	dev_info(dev, "usb mode %d %s probe success\n",
+		data->mode, data->usb2_only ? "2.0" : "3.0");
+
+	return 0;
+}
+
+static int cdns_starfive_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int cdns_starfive_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	device_for_each_child(dev, NULL, cdns_starfive_remove_core);
+
+	reset_control_assert(data->resets);
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int cdns_starfive_resume(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(data->resets);
+	if (ret)
+		return ret;
+
+	cdns_starfive_set_phy(data);
+
+	return 0;
+}
+
+static int cdns_starfive_suspend(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	reset_control_assert(data->resets);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops cdns_starfive_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
+};
+
+static const struct of_device_id cdns_starfive_of_match[] = {
+	{ .compatible = "starfive,jh7110-usb", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
+
+static struct platform_driver cdns_starfive_driver = {
+	.probe		= cdns_starfive_probe,
+	.remove		= cdns_starfive_remove,
+	.driver		= {
+		.name	= "cdns3-starfive",
+		.of_match_table	= cdns_starfive_of_match,
+		.pm	= &cdns_starfive_pm_ops,
+	},
+};
+module_platform_driver(cdns_starfive_driver);
+
+MODULE_ALIAS("platform:cdns3-starfive");
+MODULE_AUTHOR("YanHong Wang <yanhong.wang@starfivetech.com>");
+MODULE_AUTHOR("Mason Huo <mason.huo@starfivetech.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");