diff mbox series

[v2,6/6] riscv: dts: allwinner: d1: Add SPI0 controller node

Message ID 20230506073018.1411583-7-bigunclemax@gmail.com (mailing list archive)
State Superseded
Headers show
Series Allwinner R329/D1/R528/T113s SPI support | expand

Commit Message

Maksim Kiselev May 6, 2023, 7:30 a.m. UTC
Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
an optional SPI flash that connects to the SPI0 controller.

This controller is the same for R329/D1/R528/T113s SoCs and
should be supported by the sun50i-r329-spi driver.

So let's add its DT node.

Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
---
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Conor Dooley May 6, 2023, 10:46 a.m. UTC | #1
On Sat, May 06, 2023 at 10:30:14AM +0300, Maksim Kiselev wrote:
> Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
> an optional SPI flash that connects to the SPI0 controller.
> 
> This controller is the same for R329/D1/R528/T113s SoCs and
> should be supported by the sun50i-r329-spi driver.
> 
> So let's add its DT node.
> 
> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.
Andre Przywara May 6, 2023, 9:59 p.m. UTC | #2
On Sat,  6 May 2023 10:30:14 +0300
Maksim Kiselev <bigunclemax@gmail.com> wrote:

Hi,

> Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
> an optional SPI flash that connects to the SPI0 controller.
> 
> This controller is the same for R329/D1/R528/T113s SoCs and
> should be supported by the sun50i-r329-spi driver.
> 
> So let's add its DT node.
> 
> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
> ---
>  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 21 +++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index 922e8e0e2c09..a52999240a8e 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -108,6 +108,12 @@ rmii_pe_pins: rmii-pe-pins {
>  				function = "emac";
>  			};
>  
> +			/omit-if-no-ref/
> +			spi0_pins: spi0-pins {
> +				pins = "PC2", "PC3", "PC4", "PC5";
> +				function = "spi0";
> +			};
> +
>  			/omit-if-no-ref/
>  			uart1_pg6_pins: uart1-pg6-pins {
>  				pins = "PG6", "PG7";
> @@ -447,6 +453,21 @@ mmc2: mmc@4022000 {
>  			#size-cells = <0>;
>  		};
>  
> +		spi0: spi@4025000 {
> +			compatible = "allwinner,sun20i-d1-spi",
> +				     "allwinner,sun50i-r329-spi";
> +			reg = <0x04025000 0x300>;

The manual (and the other DTs) use 4K, so please use that here as well.

> +			interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
> +			clock-names = "ahb", "mod";
> +			dmas = <&dma 22>, <&dma 22>;
> +			dma-names = "rx", "tx";
> +			resets = <&ccu RST_BUS_SPI0>;
> +			status = "disabled";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};

I think we should add the second SPI controller here as well, using
that DBI fallback compatible string.
Above looks correct when compared to the manual.

Thanks,
Andre


> +
>  		usb_otg: usb@4100000 {
>  			compatible = "allwinner,sun20i-d1-musb",
>  				     "allwinner,sun8i-a33-musb";
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 922e8e0e2c09..a52999240a8e 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -108,6 +108,12 @@  rmii_pe_pins: rmii-pe-pins {
 				function = "emac";
 			};
 
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC2", "PC3", "PC4", "PC5";
+				function = "spi0";
+			};
+
 			/omit-if-no-ref/
 			uart1_pg6_pins: uart1-pg6-pins {
 				pins = "PG6", "PG7";
@@ -447,6 +453,21 @@  mmc2: mmc@4022000 {
 			#size-cells = <0>;
 		};
 
+		spi0: spi@4025000 {
+			compatible = "allwinner,sun20i-d1-spi",
+				     "allwinner,sun50i-r329-spi";
+			reg = <0x04025000 0x300>;
+			interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		usb_otg: usb@4100000 {
 			compatible = "allwinner,sun20i-d1-musb",
 				     "allwinner,sun8i-a33-musb";