[v3,5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree

Message ID	20230617161529.2092-6-jszhang@kernel.org (mailing list archive)
State	Accepted
Headers	show Return-Path: <linux-riscv-bounces+linux-riscv=archiver.kernel.org@lists.infradead.org> From: Jisheng Zhang <jszhang@kernel.org> To: Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Palmer Dabbelt <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>, Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Guo Ren <guoren@kernel.org>, Fu Wei <wefu@redhat.com>, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org Subject: [PATCH v3 5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree Date: Sun, 18 Jun 2023 00:15:26 +0800 Message-Id: <20230617161529.2092-6-jszhang@kernel.org> In-Reply-To: <20230617161529.2092-1-jszhang@kernel.org> References: <20230617161529.2092-1-jszhang@kernel.org> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-riscv" <linux-riscv-bounces@lists.infradead.org> Errors-To: linux-riscv-bounces+linux-riscv=archiver.kernel.org@lists.infradead.org
Series	Add Sipeed Lichee Pi 4A RISC-V board support \| expand [v3,0/8] Add Sipeed Lichee Pi 4A RISC-V board support [v3,1/8] dt-bindings: interrupt-controller: Add T-HEAD's TH1520 PLIC [v3,2/8] dt-bindings: timer: Add T-HEAD TH1520 clint [v3,3/8] dt-bindings: riscv: Add T-HEAD TH1520 board compatibles [v3,4/8] riscv: Add the T-HEAD SoC family Kconfig option [v3,5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree [v3,6/8] riscv: dts: thead: add sipeed Lichee Pi 4A board device tree [v3,7/8] MAINTAINERS: add entry for T-HEAD RISC-V SoC [v3,8/8] riscv: defconfig: enable T-HEAD SoC

Context	Check	Description
conchuod/tree_selection	fail	Failed to apply to next/pending-fixes, riscv/for-next or riscv/master

diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi new file mode 100644 index 000000000000..56a73134b49e --- /dev/null +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Alibaba Group Holding Limited. + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "thead,th1520"; + #address-cells = <2>; + #size-cells = <2>; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <3000000>; + + c910_0: cpu@0 { + compatible = "thead,c910", "riscv"; + device_type = "cpu"; + riscv,isa = "rv64imafdc"; + reg = <0>; + i-cache-block-size = <64>; + i-cache-size = <65536>; + i-cache-sets = <512>; + d-cache-block-size = <64>; + d-cache-size = <65536>; + d-cache-sets = <512>; + next-level-cache = <&l2_cache>; + mmu-type = "riscv,sv39"; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + c910_1: cpu@1 { + compatible = "thead,c910", "riscv"; + device_type = "cpu"; + riscv,isa = "rv64imafdc"; + reg = <1>; + i-cache-block-size = <64>; + i-cache-size = <65536>; + i-cache-sets = <512>; + d-cache-block-size = <64>; + d-cache-size = <65536>; + d-cache-sets = <512>; + next-level-cache = <&l2_cache>; + mmu-type = "riscv,sv39"; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + c910_2: cpu@2 { + compatible = "thead,c910", "riscv"; + device_type = "cpu"; + riscv,isa = "rv64imafdc"; + reg = <2>; + i-cache-block-size = <64>; + i-cache-size = <65536>; + i-cache-sets = <512>; + d-cache-block-size = <64>; + d-cache-size = <65536>; + d-cache-sets = <512>; + next-level-cache = <&l2_cache>; + mmu-type = "riscv,sv39"; + + cpu2_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + c910_3: cpu@3 { + compatible = "thead,c910", "riscv"; + device_type = "cpu"; + riscv,isa = "rv64imafdc"; + reg = <3>; + i-cache-block-size = <64>; + i-cache-size = <65536>; + i-cache-sets = <512>; + d-cache-block-size = <64>; + d-cache-size = <65536>; + d-cache-sets = <512>; + next-level-cache = <&l2_cache>; + mmu-type = "riscv,sv39"; + + cpu3_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + l2_cache: l2-cache { + compatible = "cache"; + cache-block-size = <64>; + cache-level = <2>; + cache-size = <1048576>; + cache-sets = <1024>; + cache-unified; + }; + }; + + osc: oscillator { + compatible = "fixed-clock"; + clock-output-names = "osc_24m"; + #clock-cells = <0>; + }; + + osc_32k: 32k-oscillator { + compatible = "fixed-clock"; + clock-output-names = "osc_32k"; + #clock-cells = <0>; + }; + + apb_clk: apb-clk-clock { + compatible = "fixed-clock"; + clock-output-names = "apb_clk"; + #clock-cells = <0>; + }; + + uart_sclk: uart-sclk-clock { + compatible = "fixed-clock"; + clock-output-names = "uart_sclk"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + plic: interrupt-controller@ffd8000000 { + compatible = "thead,th1520-plic", "thead,c900-plic"; + reg = <0xff 0xd8000000 0x0 0x01000000>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + riscv,ndev = <240>; + }; + + clint: timer@ffdc000000 { + compatible = "thead,th1520-clint", "thead,c900-clint"; + reg = <0xff 0xdc000000 0x0 0x00010000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>; + }; + + uart0: serial@ffe7014000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff 0xe7014000 0x0 0x100>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_sclk>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@ffe7f00000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff 0xe7f00000 0x0 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_sclk>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@ffe7f04000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff 0xe7f04000 0x0 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_sclk>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + gpio2: gpio@ffe7f34000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xff 0xe7f34000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio3: gpio@ffe7f38000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xff 0xe7f38000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio0: gpio@ffec005000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xff 0xec005000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@ffec006000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xff 0xec006000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <57 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + uart2: serial@ffec010000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff 0xec010000 0x0 0x4000>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_sclk>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + dmac0: dma-controller@ffefc00000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0xff 0xefc00000 0x0 0x1000>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb_clk>, <&apb_clk>; + clock-names = "core-clk", "cfgr-clk"; + #dma-cells = <1>; + dma-channels = <4>; + snps,block-size = <65536 65536 65536 65536>; + snps,priority = <0 1 2 3>; + snps,dma-masters = <1>; + snps,data-width = <4>; + snps,axi-max-burst-len = <16>; + status = "disabled"; + }; + + timer0: timer@ffefc32000 { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xefc32000 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer1: timer@ffefc32014 { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xefc32014 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer2: timer@ffefc32028 { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xefc32028 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer3: timer@ffefc3203c { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xefc3203c 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial@fff7f08000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff 0xf7f08000 0x0 0x4000>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_sclk>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart5: serial@fff7f0c000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff 0xf7f0c000 0x0 0x4000>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_sclk>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + timer4: timer@ffffc33000 { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xffc33000 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer5: timer@ffffc33014 { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xffc33014 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer6: timer@ffffc33028 { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xffc33028 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer7: timer@ffffc3303c { + compatible = "snps,dw-apb-timer"; + reg = <0xff 0xffc3303c 0x0 0x14>; + clocks = <&apb_clk>; + clock-names = "timer"; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ao_gpio0: gpio@fffff41000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xff 0xfff41000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + ao_gpio1: gpio@fffff52000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xff 0xfff52000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +};

[v3,5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree

Checks

Commit Message

Patch