| Message ID | 20230710154932.68377-14-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | spi: Header and core clean up and refactoring | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/cover_letter | success | Series has a cover letter |
| conchuod/tree_selection | success | Guessed tree name to be for-next at HEAD e8605e8fdf42 |
| conchuod/fixes_present | success | Fixes tag not required for -next series |
| conchuod/maintainers_pattern | success | MAINTAINERS pattern errors before the patch: 4 and now 4 |
| conchuod/verify_signedoff | success | Signed-off-by tag matches author and committer |
| conchuod/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| conchuod/build_rv64_clang_allmodconfig | fail | Failed to build the tree with this patch. |
| conchuod/module_param | success | Was 0 now: 0 |
| conchuod/build_rv64_gcc_allmodconfig | fail | Failed to build the tree with this patch. |
| conchuod/build_rv32_defconfig | success | Build OK |
| conchuod/dtb_warn_rv64 | success | Errors and warnings before: 3 this patch: 3 |
| conchuod/header_inline | success | No static functions without inline keyword in header files |
| conchuod/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 118 lines checked |
| conchuod/build_rv64_nommu_k210_defconfig | success | Build OK |
| conchuod/verify_fixes | success | No Fixes tag |
| conchuod/build_rv64_nommu_virt_defconfig | success | Build OK |
On Mon, Jul 10, 2023 at 06:49:30PM +0300, Andy Shevchenko wrote: > Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS and > convert the users to SPI_CONTROLLER_GPIO_SS to follow * I'm not an expert in English, but imo the next would look a * bit more readable: * convert s/the users to SPI_CONTROLLER_GPIO_SS/the code to using SPI_CONTROLLER_GPIO_SS > the new naming shema. s/shema/schema > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- [...] > drivers/spi/spi-dw-core.c | 2 +- [...] > diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c > index a8ba41ad4541..45f5acc26b1d 100644 > --- a/drivers/spi/spi-dw-core.c > +++ b/drivers/spi/spi-dw-core.c > @@ -932,7 +932,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) > if (dws->mem_ops.exec_op) > master->mem_ops = &dws->mem_ops; > master->max_speed_hz = dws->max_freq; > - master->flags = SPI_MASTER_GPIO_SS; > + master->flags = SPI_CONTROLLER_GPIO_SS; > master->auto_runtime_pm = true; > > /* Get default rx sample delay */ For the DW APB/AHB SSI driver: Reviewed-by: Serge Semin <fancer.lancer@gmail.com> -Serge(y) [...] > diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c > index 06a92a3a5746..bcabae98cb7c 100644 > --- a/drivers/spi/spi.c > +++ b/drivers/spi/spi.c > @@ -995,7 +995,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) > gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate); > } > /* Some SPI masters need both GPIO CS & slave_select */ > - if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && > + if ((spi->controller->flags & SPI_CONTROLLER_GPIO_SS) && > spi->controller->set_cs) > spi->controller->set_cs(spi, !enable); > } else if (spi->controller->set_cs) { > @@ -3020,7 +3020,7 @@ static int spi_get_gpio_descs(struct spi_controller *ctlr) > > ctlr->unused_native_cs = ffs(~native_cs_mask) - 1; > > - if ((ctlr->flags & SPI_MASTER_GPIO_SS) && num_cs_gpios && > + if ((ctlr->flags & SPI_CONTROLLER_GPIO_SS) && num_cs_gpios && > ctlr->max_native_cs && ctlr->unused_native_cs >= ctlr->max_native_cs) { > dev_err(dev, "No unused native chip select available\n"); > return -EINVAL; > diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h > index cdc3addfe117..43f6c3f71a76 100644 > --- a/include/linux/spi/spi.h > +++ b/include/linux/spi/spi.h > @@ -578,8 +578,7 @@ struct spi_controller { > #define SPI_CONTROLLER_NO_TX BIT(2) /* Can't do buffer write */ > #define SPI_CONTROLLER_MUST_RX BIT(3) /* Requires rx */ > #define SPI_CONTROLLER_MUST_TX BIT(4) /* Requires tx */ > - > -#define SPI_MASTER_GPIO_SS BIT(5) /* GPIO CS must select slave */ > +#define SPI_CONTROLLER_GPIO_SS BIT(5) /* GPIO CS must select slave */ > > /* Flag indicating if the allocation of this struct is devres-managed */ > bool devm_allocated; > -- > 2.40.0.1.gaa8946217a0b >
On Tue, Jul 11, 2023 at 03:30:19PM +0300, Serge Semin wrote: > On Mon, Jul 10, 2023 at 06:49:30PM +0300, Andy Shevchenko wrote: > > Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS and > > convert the users to SPI_CONTROLLER_GPIO_SS to follow > > * I'm not an expert in English, but imo the next would look a > * bit more readable: > * convert s/the users to SPI_CONTROLLER_GPIO_SS/the code to using SPI_CONTROLLER_GPIO_SS > > the new naming shema. > > s/shema/schema Right, thank you! ... > Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Thank you for the review!
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index d3dd21386f12..1b6d977d111c 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -185,7 +185,7 @@ static int ath79_spi_probe(struct platform_device *pdev) host->use_gpio_descriptors = true; host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); - host->flags = SPI_MASTER_GPIO_SS; + host->flags = SPI_CONTROLLER_GPIO_SS; host->num_chipselect = 3; host->mem_ops = &ath79_mem_ops; diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 0865993005b2..9674499ed0a6 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1476,7 +1476,7 @@ static int atmel_spi_probe(struct platform_device *pdev) host->num_chipselect = 4; host->setup = atmel_spi_setup; host->flags = (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX | - SPI_MASTER_GPIO_SS); + SPI_CONTROLLER_GPIO_SS); host->transfer_one = atmel_spi_one_transfer; host->set_cs = atmel_spi_set_cs; host->cleanup = atmel_spi_cleanup; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 862f209cada1..ecd44016c197 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -349,11 +349,11 @@ int spi_bitbang_init(struct spi_bitbang *bitbang) /* * We only need the chipselect callback if we are actually using it. * If we just use GPIO descriptors, it is surplus. If the - * SPI_MASTER_GPIO_SS flag is set, we always need to call the + * SPI_CONTROLLER_GPIO_SS flag is set, we always need to call the * driver-specific chipselect routine. */ custom_cs = (!master->use_gpio_descriptors || - (master->flags & SPI_MASTER_GPIO_SS)); + (master->flags & SPI_CONTROLLER_GPIO_SS)); if (custom_cs && !bitbang->chipselect) return -EINVAL; @@ -371,7 +371,7 @@ int spi_bitbang_init(struct spi_bitbang *bitbang) master->transfer_one = spi_bitbang_transfer_one; /* * When using GPIO descriptors, the ->set_cs() callback doesn't even - * get called unless SPI_MASTER_GPIO_SS is set. + * get called unless SPI_CONTROLLER_GPIO_SS is set. */ if (custom_cs) master->set_cs = spi_bitbang_set_cs; diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 014392459d5e..7ea2ac053052 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -939,7 +939,7 @@ static int davinci_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = pdata->num_chipselect; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16); - master->flags = SPI_CONTROLLER_MUST_RX | SPI_MASTER_GPIO_SS; + master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_GPIO_SS; master->setup = davinci_spi_setup; master->cleanup = davinci_spi_cleanup; master->can_dma = davinci_spi_can_dma; diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index a8ba41ad4541..45f5acc26b1d 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -932,7 +932,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) if (dws->mem_ops.exec_op) master->mem_ops = &dws->mem_ops; master->max_speed_hz = dws->max_freq; - master->flags = SPI_MASTER_GPIO_SS; + master->flags = SPI_CONTROLLER_GPIO_SS; master->auto_runtime_pm = true; /* Get default rx sample delay */ diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 85e149ec2910..612db477ad12 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -434,7 +434,7 @@ static int spi_gpio_probe(struct platform_device *pdev) * line, that we need to do on selection. This makes the local * callback for chipselect always get called. */ - master->flags |= SPI_MASTER_GPIO_SS; + master->flags |= SPI_CONTROLLER_GPIO_SS; bb->chipselect = spi_gpio_chipselect; bb->set_line_direction = spi_gpio_set_direction; diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 528ae46c087f..8d97f2b32c2b 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1779,7 +1779,7 @@ static int spi_imx_probe(struct platform_device *pdev) if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) { controller->max_native_cs = 4; - controller->flags |= SPI_MASTER_GPIO_SS; + controller->flags |= SPI_CONTROLLER_GPIO_SS; } spi_imx->spi_drctl = spi_drctl; diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index ad9e83e34297..4882aafd0505 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -677,7 +677,7 @@ static int orion_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); master->auto_runtime_pm = true; master->use_gpio_descriptors = true; - master->flags = SPI_MASTER_GPIO_SS; + master->flags = SPI_CONTROLLER_GPIO_SS; platform_set_drvdata(pdev, master); diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 143ede958ac1..a37943847e81 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -858,7 +858,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) ctlr->mode_bits |= SPI_NO_CS; ctlr->slave_abort = rockchip_spi_slave_abort; } else { - ctlr->flags = SPI_MASTER_GPIO_SS; + ctlr->flags = SPI_CONTROLLER_GPIO_SS; ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM; /* * rk spi0 has two native cs, spi1..5 one cs only diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c index dae9e097c333..2f77dae85386 100644 --- a/drivers/spi/spi-sifive.c +++ b/drivers/spi/spi-sifive.c @@ -379,7 +379,7 @@ static int sifive_spi_probe(struct platform_device *pdev) * we need to "left-align" the bits (unless SPI_LSB_FIRST) */ master->bits_per_word_mask = SPI_BPW_MASK(8); - master->flags = SPI_CONTROLLER_MUST_TX | SPI_MASTER_GPIO_SS; + master->flags = SPI_CONTROLLER_MUST_TX | SPI_CONTROLLER_GPIO_SS; master->prepare_message = sifive_spi_prepare_message; master->set_cs = sifive_spi_set_cs; master->transfer_one = sifive_spi_transfer_one; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 06a92a3a5746..bcabae98cb7c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -995,7 +995,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate); } /* Some SPI masters need both GPIO CS & slave_select */ - if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && + if ((spi->controller->flags & SPI_CONTROLLER_GPIO_SS) && spi->controller->set_cs) spi->controller->set_cs(spi, !enable); } else if (spi->controller->set_cs) { @@ -3020,7 +3020,7 @@ static int spi_get_gpio_descs(struct spi_controller *ctlr) ctlr->unused_native_cs = ffs(~native_cs_mask) - 1; - if ((ctlr->flags & SPI_MASTER_GPIO_SS) && num_cs_gpios && + if ((ctlr->flags & SPI_CONTROLLER_GPIO_SS) && num_cs_gpios && ctlr->max_native_cs && ctlr->unused_native_cs >= ctlr->max_native_cs) { dev_err(dev, "No unused native chip select available\n"); return -EINVAL; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index cdc3addfe117..43f6c3f71a76 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -578,8 +578,7 @@ struct spi_controller { #define SPI_CONTROLLER_NO_TX BIT(2) /* Can't do buffer write */ #define SPI_CONTROLLER_MUST_RX BIT(3) /* Requires rx */ #define SPI_CONTROLLER_MUST_TX BIT(4) /* Requires tx */ - -#define SPI_MASTER_GPIO_SS BIT(5) /* GPIO CS must select slave */ +#define SPI_CONTROLLER_GPIO_SS BIT(5) /* GPIO CS must select slave */ /* Flag indicating if the allocation of this struct is devres-managed */ bool devm_allocated;
Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS and convert the users to SPI_CONTROLLER_GPIO_SS to follow the new naming shema. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/spi/spi-ath79.c | 2 +- drivers/spi/spi-atmel.c | 2 +- drivers/spi/spi-bitbang.c | 6 +++--- drivers/spi/spi-davinci.c | 2 +- drivers/spi/spi-dw-core.c | 2 +- drivers/spi/spi-gpio.c | 2 +- drivers/spi/spi-imx.c | 2 +- drivers/spi/spi-orion.c | 2 +- drivers/spi/spi-rockchip.c | 2 +- drivers/spi/spi-sifive.c | 2 +- drivers/spi/spi.c | 4 ++-- include/linux/spi/spi.h | 3 +-- 12 files changed, 15 insertions(+), 16 deletions(-)