| Message ID | 20230714103659.3146949-1-guoren@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V4] riscv: kexec: Fixup synchronization problem between init_mm and active_mm | expand |
Tested-by: Xing Xiaoguang <xingxg2008@163.com> The patch works fine on Linux 6.5-RC1 which runs on SOPHGO SG2042 EVB that has 64 RISC-V cores. At 2023-07-14 18:36:59, guoren@kernel.org wrote: >From: Guo Ren <guoren@linux.alibaba.com> > >The machine_kexec() uses set_memory_x to modify the direct mapping >attributes from RW to RWX. The current implementation of set_memory_x >does not split hugepages in the linear mapping and then when a PGD >mapping is used, the whole PGD is marked as executable. But changing >the permissions at the PGD level must be propagated to all the page >tables. When kexec jumps into control_buffer, the instruction page >fault happens, and there is no minor_pagefault for it, then panic. > >The bug is found on an MMU_sv39 machine, and the direct mapping used a >1GB PUD, the pgd entries. Here is the bug output: > > kexec_core: Starting new kernel > Will call new kernel at 00300000 from hart id 0 > FDT image at 747c7000 > Bye... > Unable to handle kernel paging request at virtual address ffffffda23b0d000 > Oops [#1] > Modules linked in: > CPU: 0 PID: 53 Comm: uinit Not tainted 6.4.0-rc6 #15 > Hardware name: Sophgo Mango (DT) > epc : 0xffffffda23b0d000 > ra : machine_kexec+0xa6/0xb0 > epc : ffffffda23b0d000 ra : ffffffff80008272 sp : ffffffc80c173d10 > gp : ffffffff8150e1e0 tp : ffffffd9073d2c40 t0 : 0000000000000000 > t1 : 0000000000000042 t2 : 6567616d69205444 s0 : ffffffc80c173d50 > s1 : ffffffd9076c4800 a0 : ffffffd9076c4800 a1 : 0000000000300000 > a2 : 00000000747c7000 a3 : 0000000000000000 a4 : ffffffd800000000 > a5 : 0000000000000000 a6 : ffffffd903619c40 a7 : ffffffffffffffff > s2 : ffffffda23b0d000 s3 : 0000000000300000 s4 : 00000000747c7000 > s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 > s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 > s11: 0000003f940001a0 t3 : ffffffff815351af t4 : ffffffff815351af > t5 : ffffffff815351b0 t6 : ffffffc80c173b50 > status: 0000000200000100 badaddr: ffffffda23b0d000 cause: 000000000000000c > >Given the current flaw in the set_memory_x implementation, the simplest >solution is to fix machine_kexec() to remap control code page outside >the linear mapping. Because the control code buffer was moved from the >direct mapping area to the vmalloc location, we need an additional >va_va_offset to fix up va_pa_offset. > >Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") >Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> >Reported-by: Xing XiaoGuang <xingxg2008@163.com> >Signed-off-by: Guo Ren <guoren@linux.alibaba.com> >Signed-off-by: Guo Ren <guoren@kernel.org> >--- >Changelog: >V4: > - Fixup va_pa_offset with additional va_va_offset. > - Add Reported-by tag. > >V3: > - Resume set_memory_x to set the _PAGE_EXEC attribute > - Optimize the commit log with Alexandre advice > >V2: > - Use vm_map_ram instead of modifying set_memory_x > - Correct Fixes tag >--- > arch/riscv/include/asm/kexec.h | 1 + > arch/riscv/kernel/machine_kexec.c | 18 +++++++++++++++--- > 2 files changed, 16 insertions(+), 3 deletions(-) > >diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h >index 2b56769cb530..17456e91476e 100644 >--- a/arch/riscv/include/asm/kexec.h >+++ b/arch/riscv/include/asm/kexec.h >@@ -41,6 +41,7 @@ crash_setup_regs(struct pt_regs *newregs, > struct kimage_arch { > void *fdt; /* For CONFIG_KEXEC_FILE */ > unsigned long fdt_addr; >+ void *control_code_buffer; > }; > > extern const unsigned char riscv_kexec_relocate[]; >diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c >index 2d139b724bc8..60c1ef3c2232 100644 >--- a/arch/riscv/kernel/machine_kexec.c >+++ b/arch/riscv/kernel/machine_kexec.c >@@ -86,7 +86,14 @@ machine_kexec_prepare(struct kimage *image) > > /* Copy the assembler code for relocation to the control page */ > if (image->type != KEXEC_TYPE_CRASH) { >- control_code_buffer = page_address(image->control_code_page); >+ control_code_buffer = vm_map_ram(&image->control_code_page, >+ KEXEC_CONTROL_PAGE_SIZE/PAGE_SIZE, >+ NUMA_NO_NODE); >+ if (control_code_buffer == NULL) { >+ pr_err("Failed to vm_map control page\n"); >+ return -ENOMEM; >+ } >+ > control_code_buffer_sz = page_size(image->control_code_page); > > if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) { >@@ -99,6 +106,8 @@ machine_kexec_prepare(struct kimage *image) > > /* Mark the control page executable */ > set_memory_x((unsigned long) control_code_buffer, 1); >+ >+ internal->control_code_buffer = control_code_buffer; > } > > return 0; >@@ -211,7 +220,10 @@ machine_kexec(struct kimage *image) > unsigned long this_cpu_id = __smp_processor_id(); > unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id); > unsigned long fdt_addr = internal->fdt_addr; >- void *control_code_buffer = page_address(image->control_code_page); >+ void *control_code_buffer = internal->control_code_buffer; >+ unsigned long va_va_offset = >+ (unsigned long) page_address(image->control_code_page) >+ - (unsigned long) control_code_buffer; > riscv_kexec_method kexec_method = NULL; > > #ifdef CONFIG_SMP >@@ -234,6 +246,6 @@ machine_kexec(struct kimage *image) > /* Jump to the relocation code */ > pr_notice("Bye...\n"); > kexec_method(first_ind_entry, jump_addr, fdt_addr, >- this_hart_id, kernel_map.va_pa_offset); >+ this_hart_id, kernel_map.va_pa_offset - va_va_offset); > unreachable(); > } >-- >2.36.1
On 14/07/2023 12:36, guoren@kernel.org wrote: > From: Guo Ren <guoren@linux.alibaba.com> > > The machine_kexec() uses set_memory_x to modify the direct mapping > attributes from RW to RWX. The current implementation of set_memory_x > does not split hugepages in the linear mapping and then when a PGD > mapping is used, the whole PGD is marked as executable. But changing > the permissions at the PGD level must be propagated to all the page > tables. When kexec jumps into control_buffer, the instruction page > fault happens, and there is no minor_pagefault for it, then panic. > > The bug is found on an MMU_sv39 machine, and the direct mapping used a > 1GB PUD, the pgd entries. Here is the bug output: > > kexec_core: Starting new kernel > Will call new kernel at 00300000 from hart id 0 > FDT image at 747c7000 > Bye... > Unable to handle kernel paging request at virtual address ffffffda23b0d000 > Oops [#1] > Modules linked in: > CPU: 0 PID: 53 Comm: uinit Not tainted 6.4.0-rc6 #15 > Hardware name: Sophgo Mango (DT) > epc : 0xffffffda23b0d000 > ra : machine_kexec+0xa6/0xb0 > epc : ffffffda23b0d000 ra : ffffffff80008272 sp : ffffffc80c173d10 > gp : ffffffff8150e1e0 tp : ffffffd9073d2c40 t0 : 0000000000000000 > t1 : 0000000000000042 t2 : 6567616d69205444 s0 : ffffffc80c173d50 > s1 : ffffffd9076c4800 a0 : ffffffd9076c4800 a1 : 0000000000300000 > a2 : 00000000747c7000 a3 : 0000000000000000 a4 : ffffffd800000000 > a5 : 0000000000000000 a6 : ffffffd903619c40 a7 : ffffffffffffffff > s2 : ffffffda23b0d000 s3 : 0000000000300000 s4 : 00000000747c7000 > s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 > s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 > s11: 0000003f940001a0 t3 : ffffffff815351af t4 : ffffffff815351af > t5 : ffffffff815351b0 t6 : ffffffc80c173b50 > status: 0000000200000100 badaddr: ffffffda23b0d000 cause: 000000000000000c > > Given the current flaw in the set_memory_x implementation, the simplest > solution is to fix machine_kexec() to remap control code page outside > the linear mapping. Because the control code buffer was moved from the > direct mapping area to the vmalloc location, we need an additional > va_va_offset to fix up va_pa_offset. > > Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") > Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> > Reported-by: Xing XiaoGuang <xingxg2008@163.com> > Signed-off-by: Guo Ren <guoren@linux.alibaba.com> > Signed-off-by: Guo Ren <guoren@kernel.org> > --- > Changelog: > V4: > - Fixup va_pa_offset with additional va_va_offset. > - Add Reported-by tag. > > V3: > - Resume set_memory_x to set the _PAGE_EXEC attribute > - Optimize the commit log with Alexandre advice > > V2: > - Use vm_map_ram instead of modifying set_memory_x > - Correct Fixes tag > --- > arch/riscv/include/asm/kexec.h | 1 + > arch/riscv/kernel/machine_kexec.c | 18 +++++++++++++++--- > 2 files changed, 16 insertions(+), 3 deletions(-) > > diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h > index 2b56769cb530..17456e91476e 100644 > --- a/arch/riscv/include/asm/kexec.h > +++ b/arch/riscv/include/asm/kexec.h > @@ -41,6 +41,7 @@ crash_setup_regs(struct pt_regs *newregs, > struct kimage_arch { > void *fdt; /* For CONFIG_KEXEC_FILE */ > unsigned long fdt_addr; > + void *control_code_buffer; > }; > > extern const unsigned char riscv_kexec_relocate[]; > diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c > index 2d139b724bc8..60c1ef3c2232 100644 > --- a/arch/riscv/kernel/machine_kexec.c > +++ b/arch/riscv/kernel/machine_kexec.c > @@ -86,7 +86,14 @@ machine_kexec_prepare(struct kimage *image) > > /* Copy the assembler code for relocation to the control page */ > if (image->type != KEXEC_TYPE_CRASH) { > - control_code_buffer = page_address(image->control_code_page); > + control_code_buffer = vm_map_ram(&image->control_code_page, > + KEXEC_CONTROL_PAGE_SIZE/PAGE_SIZE, > + NUMA_NO_NODE); > + if (control_code_buffer == NULL) { > + pr_err("Failed to vm_map control page\n"); > + return -ENOMEM; > + } > + > control_code_buffer_sz = page_size(image->control_code_page); > > if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) { > @@ -99,6 +106,8 @@ machine_kexec_prepare(struct kimage *image) > > /* Mark the control page executable */ > set_memory_x((unsigned long) control_code_buffer, 1); > + > + internal->control_code_buffer = control_code_buffer; > } > > return 0; > @@ -211,7 +220,10 @@ machine_kexec(struct kimage *image) > unsigned long this_cpu_id = __smp_processor_id(); > unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id); > unsigned long fdt_addr = internal->fdt_addr; > - void *control_code_buffer = page_address(image->control_code_page); > + void *control_code_buffer = internal->control_code_buffer; > + unsigned long va_va_offset = > + (unsigned long) page_address(image->control_code_page) > + - (unsigned long) control_code_buffer; > riscv_kexec_method kexec_method = NULL; > > #ifdef CONFIG_SMP > @@ -234,6 +246,6 @@ machine_kexec(struct kimage *image) > /* Jump to the relocation code */ > pr_notice("Bye...\n"); > kexec_method(first_ind_entry, jump_addr, fdt_addr, > - this_hart_id, kernel_map.va_pa_offset); > + this_hart_id, kernel_map.va_pa_offset - va_va_offset); > unreachable(); > } I started working on the set_memory fix and the first thing to do is to prevent the use of PGD mapping, it's too cumbersome to propagate changes at this level: IIRC x86 keeps a list of page tables to go through whenever that happens, that's why Bjorn pre-allocated all the PGD entries to cover the vmalloc region. So, to me, the simple fix for this issue is to prevent the use of PGD mapping. What do you think? Does the following patch work? diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 70fb31960b63..6dd12443bfa4 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -662,13 +662,12 @@ void __init create_pgd_mapping(pgd_t *pgdp, static uintptr_t __init best_map_size(phys_addr_t pa, uintptr_t va, phys_addr_t size) { - if (!(pa & (PGDIR_SIZE - 1)) && !(va & (PGDIR_SIZE - 1)) && size >= PGDIR_SIZE) - return PGDIR_SIZE; - - if (!(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= P4D_SIZE) + if (pgtable_l5_enabled && + !(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= P4D_SIZE) return P4D_SIZE; - if (!(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= PUD_SIZE) + if (pgtable_l4_enabled && + !(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= PUD_SIZE) return PUD_SIZE; if (!(pa & (PMD_SIZE - 1)) && !(va & (PMD_SIZE - 1)) && size >= PMD_SIZE) Thanks, Alex
On Mon, Jul 17, 2023 at 9:17 PM Alexandre Ghiti <alex@ghiti.fr> wrote: > > > On 14/07/2023 12:36, guoren@kernel.org wrote: > > From: Guo Ren <guoren@linux.alibaba.com> > > > > The machine_kexec() uses set_memory_x to modify the direct mapping > > attributes from RW to RWX. The current implementation of set_memory_x > > does not split hugepages in the linear mapping and then when a PGD > > mapping is used, the whole PGD is marked as executable. But changing > > the permissions at the PGD level must be propagated to all the page > > tables. When kexec jumps into control_buffer, the instruction page > > fault happens, and there is no minor_pagefault for it, then panic. > > > > The bug is found on an MMU_sv39 machine, and the direct mapping used a > > 1GB PUD, the pgd entries. Here is the bug output: > > > > kexec_core: Starting new kernel > > Will call new kernel at 00300000 from hart id 0 > > FDT image at 747c7000 > > Bye... > > Unable to handle kernel paging request at virtual address ffffffda23b0d000 > > Oops [#1] > > Modules linked in: > > CPU: 0 PID: 53 Comm: uinit Not tainted 6.4.0-rc6 #15 > > Hardware name: Sophgo Mango (DT) > > epc : 0xffffffda23b0d000 > > ra : machine_kexec+0xa6/0xb0 > > epc : ffffffda23b0d000 ra : ffffffff80008272 sp : ffffffc80c173d10 > > gp : ffffffff8150e1e0 tp : ffffffd9073d2c40 t0 : 0000000000000000 > > t1 : 0000000000000042 t2 : 6567616d69205444 s0 : ffffffc80c173d50 > > s1 : ffffffd9076c4800 a0 : ffffffd9076c4800 a1 : 0000000000300000 > > a2 : 00000000747c7000 a3 : 0000000000000000 a4 : ffffffd800000000 > > a5 : 0000000000000000 a6 : ffffffd903619c40 a7 : ffffffffffffffff > > s2 : ffffffda23b0d000 s3 : 0000000000300000 s4 : 00000000747c7000 > > s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 > > s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 > > s11: 0000003f940001a0 t3 : ffffffff815351af t4 : ffffffff815351af > > t5 : ffffffff815351b0 t6 : ffffffc80c173b50 > > status: 0000000200000100 badaddr: ffffffda23b0d000 cause: 000000000000000c > > > > Given the current flaw in the set_memory_x implementation, the simplest > > solution is to fix machine_kexec() to remap control code page outside > > the linear mapping. Because the control code buffer was moved from the > > direct mapping area to the vmalloc location, we need an additional > > va_va_offset to fix up va_pa_offset. > > > > Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") > > Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> > > Reported-by: Xing XiaoGuang <xingxg2008@163.com> > > Signed-off-by: Guo Ren <guoren@linux.alibaba.com> > > Signed-off-by: Guo Ren <guoren@kernel.org> > > --- > > Changelog: > > V4: > > - Fixup va_pa_offset with additional va_va_offset. > > - Add Reported-by tag. > > > > V3: > > - Resume set_memory_x to set the _PAGE_EXEC attribute > > - Optimize the commit log with Alexandre advice > > > > V2: > > - Use vm_map_ram instead of modifying set_memory_x > > - Correct Fixes tag > > --- > > arch/riscv/include/asm/kexec.h | 1 + > > arch/riscv/kernel/machine_kexec.c | 18 +++++++++++++++--- > > 2 files changed, 16 insertions(+), 3 deletions(-) > > > > diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h > > index 2b56769cb530..17456e91476e 100644 > > --- a/arch/riscv/include/asm/kexec.h > > +++ b/arch/riscv/include/asm/kexec.h > > @@ -41,6 +41,7 @@ crash_setup_regs(struct pt_regs *newregs, > > struct kimage_arch { > > void *fdt; /* For CONFIG_KEXEC_FILE */ > > unsigned long fdt_addr; > > + void *control_code_buffer; > > }; > > > > extern const unsigned char riscv_kexec_relocate[]; > > diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c > > index 2d139b724bc8..60c1ef3c2232 100644 > > --- a/arch/riscv/kernel/machine_kexec.c > > +++ b/arch/riscv/kernel/machine_kexec.c > > @@ -86,7 +86,14 @@ machine_kexec_prepare(struct kimage *image) > > > > /* Copy the assembler code for relocation to the control page */ > > if (image->type != KEXEC_TYPE_CRASH) { > > - control_code_buffer = page_address(image->control_code_page); > > + control_code_buffer = vm_map_ram(&image->control_code_page, > > + KEXEC_CONTROL_PAGE_SIZE/PAGE_SIZE, > > + NUMA_NO_NODE); > > + if (control_code_buffer == NULL) { > > + pr_err("Failed to vm_map control page\n"); > > + return -ENOMEM; > > + } > > + > > control_code_buffer_sz = page_size(image->control_code_page); > > > > if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) { > > @@ -99,6 +106,8 @@ machine_kexec_prepare(struct kimage *image) > > > > /* Mark the control page executable */ > > set_memory_x((unsigned long) control_code_buffer, 1); > > + > > + internal->control_code_buffer = control_code_buffer; > > } > > > > return 0; > > @@ -211,7 +220,10 @@ machine_kexec(struct kimage *image) > > unsigned long this_cpu_id = __smp_processor_id(); > > unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id); > > unsigned long fdt_addr = internal->fdt_addr; > > - void *control_code_buffer = page_address(image->control_code_page); > > + void *control_code_buffer = internal->control_code_buffer; > > + unsigned long va_va_offset = > > + (unsigned long) page_address(image->control_code_page) > > + - (unsigned long) control_code_buffer; > > riscv_kexec_method kexec_method = NULL; > > > > #ifdef CONFIG_SMP > > @@ -234,6 +246,6 @@ machine_kexec(struct kimage *image) > > /* Jump to the relocation code */ > > pr_notice("Bye...\n"); > > kexec_method(first_ind_entry, jump_addr, fdt_addr, > > - this_hart_id, kernel_map.va_pa_offset); > > + this_hart_id, kernel_map.va_pa_offset - va_va_offset); > > unreachable(); > > } > > > I started working on the set_memory fix and the first thing to do is to > prevent the use of PGD mapping, it's too cumbersome to propagate changes > at this level: IIRC x86 keeps a list of page tables to go through > whenever that happens, that's why Bjorn pre-allocated all the PGD > entries to cover the vmalloc region. > > So, to me, the simple fix for this issue is to prevent the use of PGD > mapping. What do you think? Does the following patch work? The PGD mapping is necessary (especially for Sv32, Sv39), and it has been solved under your first advice. I think limit set_memory_x usage is the smart choice for now. > > > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c > index 70fb31960b63..6dd12443bfa4 100644 > --- a/arch/riscv/mm/init.c > +++ b/arch/riscv/mm/init.c > @@ -662,13 +662,12 @@ void __init create_pgd_mapping(pgd_t *pgdp, > static uintptr_t __init best_map_size(phys_addr_t pa, uintptr_t va, > phys_addr_t size) > { > - if (!(pa & (PGDIR_SIZE - 1)) && !(va & (PGDIR_SIZE - 1)) && size > >= PGDIR_SIZE) > - return PGDIR_SIZE; > - > - if (!(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= > P4D_SIZE) > + if (pgtable_l5_enabled && > + !(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= > P4D_SIZE) > return P4D_SIZE; > > - if (!(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= > PUD_SIZE) > + if (pgtable_l4_enabled && > + !(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= > PUD_SIZE) > return PUD_SIZE; > > if (!(pa & (PMD_SIZE - 1)) && !(va & (PMD_SIZE - 1)) && size >= > PMD_SIZE) > > > Thanks, > > Alex >
On 18/07/2023 14:30, Guo Ren wrote: > On Mon, Jul 17, 2023 at 9:17 PM Alexandre Ghiti <alex@ghiti.fr> wrote: >> >> On 14/07/2023 12:36, guoren@kernel.org wrote: >>> From: Guo Ren <guoren@linux.alibaba.com> >>> >>> The machine_kexec() uses set_memory_x to modify the direct mapping >>> attributes from RW to RWX. The current implementation of set_memory_x >>> does not split hugepages in the linear mapping and then when a PGD >>> mapping is used, the whole PGD is marked as executable. But changing >>> the permissions at the PGD level must be propagated to all the page >>> tables. When kexec jumps into control_buffer, the instruction page >>> fault happens, and there is no minor_pagefault for it, then panic. >>> >>> The bug is found on an MMU_sv39 machine, and the direct mapping used a >>> 1GB PUD, the pgd entries. Here is the bug output: >>> >>> kexec_core: Starting new kernel >>> Will call new kernel at 00300000 from hart id 0 >>> FDT image at 747c7000 >>> Bye... >>> Unable to handle kernel paging request at virtual address ffffffda23b0d000 >>> Oops [#1] >>> Modules linked in: >>> CPU: 0 PID: 53 Comm: uinit Not tainted 6.4.0-rc6 #15 >>> Hardware name: Sophgo Mango (DT) >>> epc : 0xffffffda23b0d000 >>> ra : machine_kexec+0xa6/0xb0 >>> epc : ffffffda23b0d000 ra : ffffffff80008272 sp : ffffffc80c173d10 >>> gp : ffffffff8150e1e0 tp : ffffffd9073d2c40 t0 : 0000000000000000 >>> t1 : 0000000000000042 t2 : 6567616d69205444 s0 : ffffffc80c173d50 >>> s1 : ffffffd9076c4800 a0 : ffffffd9076c4800 a1 : 0000000000300000 >>> a2 : 00000000747c7000 a3 : 0000000000000000 a4 : ffffffd800000000 >>> a5 : 0000000000000000 a6 : ffffffd903619c40 a7 : ffffffffffffffff >>> s2 : ffffffda23b0d000 s3 : 0000000000300000 s4 : 00000000747c7000 >>> s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 >>> s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 >>> s11: 0000003f940001a0 t3 : ffffffff815351af t4 : ffffffff815351af >>> t5 : ffffffff815351b0 t6 : ffffffc80c173b50 >>> status: 0000000200000100 badaddr: ffffffda23b0d000 cause: 000000000000000c >>> >>> Given the current flaw in the set_memory_x implementation, the simplest >>> solution is to fix machine_kexec() to remap control code page outside >>> the linear mapping. Because the control code buffer was moved from the >>> direct mapping area to the vmalloc location, we need an additional >>> va_va_offset to fix up va_pa_offset. >>> >>> Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") >>> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> >>> Reported-by: Xing XiaoGuang <xingxg2008@163.com> >>> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> >>> Signed-off-by: Guo Ren <guoren@kernel.org> >>> --- >>> Changelog: >>> V4: >>> - Fixup va_pa_offset with additional va_va_offset. >>> - Add Reported-by tag. >>> >>> V3: >>> - Resume set_memory_x to set the _PAGE_EXEC attribute >>> - Optimize the commit log with Alexandre advice >>> >>> V2: >>> - Use vm_map_ram instead of modifying set_memory_x >>> - Correct Fixes tag >>> --- >>> arch/riscv/include/asm/kexec.h | 1 + >>> arch/riscv/kernel/machine_kexec.c | 18 +++++++++++++++--- >>> 2 files changed, 16 insertions(+), 3 deletions(-) >>> >>> diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h >>> index 2b56769cb530..17456e91476e 100644 >>> --- a/arch/riscv/include/asm/kexec.h >>> +++ b/arch/riscv/include/asm/kexec.h >>> @@ -41,6 +41,7 @@ crash_setup_regs(struct pt_regs *newregs, >>> struct kimage_arch { >>> void *fdt; /* For CONFIG_KEXEC_FILE */ >>> unsigned long fdt_addr; >>> + void *control_code_buffer; >>> }; >>> >>> extern const unsigned char riscv_kexec_relocate[]; >>> diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c >>> index 2d139b724bc8..60c1ef3c2232 100644 >>> --- a/arch/riscv/kernel/machine_kexec.c >>> +++ b/arch/riscv/kernel/machine_kexec.c >>> @@ -86,7 +86,14 @@ machine_kexec_prepare(struct kimage *image) >>> >>> /* Copy the assembler code for relocation to the control page */ >>> if (image->type != KEXEC_TYPE_CRASH) { >>> - control_code_buffer = page_address(image->control_code_page); >>> + control_code_buffer = vm_map_ram(&image->control_code_page, >>> + KEXEC_CONTROL_PAGE_SIZE/PAGE_SIZE, >>> + NUMA_NO_NODE); >>> + if (control_code_buffer == NULL) { >>> + pr_err("Failed to vm_map control page\n"); >>> + return -ENOMEM; >>> + } >>> + >>> control_code_buffer_sz = page_size(image->control_code_page); >>> >>> if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) { >>> @@ -99,6 +106,8 @@ machine_kexec_prepare(struct kimage *image) >>> >>> /* Mark the control page executable */ >>> set_memory_x((unsigned long) control_code_buffer, 1); >>> + >>> + internal->control_code_buffer = control_code_buffer; >>> } >>> >>> return 0; >>> @@ -211,7 +220,10 @@ machine_kexec(struct kimage *image) >>> unsigned long this_cpu_id = __smp_processor_id(); >>> unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id); >>> unsigned long fdt_addr = internal->fdt_addr; >>> - void *control_code_buffer = page_address(image->control_code_page); >>> + void *control_code_buffer = internal->control_code_buffer; >>> + unsigned long va_va_offset = >>> + (unsigned long) page_address(image->control_code_page) >>> + - (unsigned long) control_code_buffer; >>> riscv_kexec_method kexec_method = NULL; >>> >>> #ifdef CONFIG_SMP >>> @@ -234,6 +246,6 @@ machine_kexec(struct kimage *image) >>> /* Jump to the relocation code */ >>> pr_notice("Bye...\n"); >>> kexec_method(first_ind_entry, jump_addr, fdt_addr, >>> - this_hart_id, kernel_map.va_pa_offset); >>> + this_hart_id, kernel_map.va_pa_offset - va_va_offset); >>> unreachable(); >>> } >> >> I started working on the set_memory fix and the first thing to do is to >> prevent the use of PGD mapping, it's too cumbersome to propagate changes >> at this level: IIRC x86 keeps a list of page tables to go through >> whenever that happens, that's why Bjorn pre-allocated all the PGD >> entries to cover the vmalloc region. >> >> So, to me, the simple fix for this issue is to prevent the use of PGD >> mapping. What do you think? Does the following patch work? > The PGD mapping is necessary (especially for Sv32, Sv39), and it has > been solved under your first advice. I think limit set_memory_x usage > is the smart choice for now. If we use PGD mappings, we won't be able to change the protections or remove pages from the linear mapping as we don't have a means to synchronize all the page tables. Removing pages from the linear mapping is used for example for memfd_secret and certainly other things so that means using PGD mappings will break a few things. The benefits of PGD mappings for the linear mapping was not proven, and even if I agree we should do our best to keep the largest mapping possible just in case, implementing a page table synchronization seems very cumbersome (x86 does that though). I'm not opposed to your solution, but: - either we remove the PGD mappings, and your problem is fixed, - or we keep PGD mappings, implement a page table synchronization, and your problem is fixed. And since we need to fix this larger problem, I don't see the point of this workaround. Thanks, Alex > > >> >> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c >> index 70fb31960b63..6dd12443bfa4 100644 >> --- a/arch/riscv/mm/init.c >> +++ b/arch/riscv/mm/init.c >> @@ -662,13 +662,12 @@ void __init create_pgd_mapping(pgd_t *pgdp, >> static uintptr_t __init best_map_size(phys_addr_t pa, uintptr_t va, >> phys_addr_t size) >> { >> - if (!(pa & (PGDIR_SIZE - 1)) && !(va & (PGDIR_SIZE - 1)) && size >> >= PGDIR_SIZE) >> - return PGDIR_SIZE; >> - >> - if (!(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= >> P4D_SIZE) >> + if (pgtable_l5_enabled && >> + !(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= >> P4D_SIZE) >> return P4D_SIZE; >> >> - if (!(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= >> PUD_SIZE) >> + if (pgtable_l4_enabled && >> + !(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= >> PUD_SIZE) >> return PUD_SIZE; >> >> if (!(pa & (PMD_SIZE - 1)) && !(va & (PMD_SIZE - 1)) && size >= >> PMD_SIZE) >> >> >> Thanks, >> >> Alex >> >
On Thu, Jul 20, 2023 at 4:28 AM Alexandre Ghiti <alex@ghiti.fr> wrote: > > > On 18/07/2023 14:30, Guo Ren wrote: > > On Mon, Jul 17, 2023 at 9:17 PM Alexandre Ghiti <alex@ghiti.fr> wrote: > >> > >> On 14/07/2023 12:36, guoren@kernel.org wrote: > >>> From: Guo Ren <guoren@linux.alibaba.com> > >>> > >>> The machine_kexec() uses set_memory_x to modify the direct mapping > >>> attributes from RW to RWX. The current implementation of set_memory_x > >>> does not split hugepages in the linear mapping and then when a PGD > >>> mapping is used, the whole PGD is marked as executable. But changing > >>> the permissions at the PGD level must be propagated to all the page > >>> tables. When kexec jumps into control_buffer, the instruction page > >>> fault happens, and there is no minor_pagefault for it, then panic. > >>> > >>> The bug is found on an MMU_sv39 machine, and the direct mapping used a > >>> 1GB PUD, the pgd entries. Here is the bug output: > >>> > >>> kexec_core: Starting new kernel > >>> Will call new kernel at 00300000 from hart id 0 > >>> FDT image at 747c7000 > >>> Bye... > >>> Unable to handle kernel paging request at virtual address ffffffda23b0d000 > >>> Oops [#1] > >>> Modules linked in: > >>> CPU: 0 PID: 53 Comm: uinit Not tainted 6.4.0-rc6 #15 > >>> Hardware name: Sophgo Mango (DT) > >>> epc : 0xffffffda23b0d000 > >>> ra : machine_kexec+0xa6/0xb0 > >>> epc : ffffffda23b0d000 ra : ffffffff80008272 sp : ffffffc80c173d10 > >>> gp : ffffffff8150e1e0 tp : ffffffd9073d2c40 t0 : 0000000000000000 > >>> t1 : 0000000000000042 t2 : 6567616d69205444 s0 : ffffffc80c173d50 > >>> s1 : ffffffd9076c4800 a0 : ffffffd9076c4800 a1 : 0000000000300000 > >>> a2 : 00000000747c7000 a3 : 0000000000000000 a4 : ffffffd800000000 > >>> a5 : 0000000000000000 a6 : ffffffd903619c40 a7 : ffffffffffffffff > >>> s2 : ffffffda23b0d000 s3 : 0000000000300000 s4 : 00000000747c7000 > >>> s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 > >>> s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 > >>> s11: 0000003f940001a0 t3 : ffffffff815351af t4 : ffffffff815351af > >>> t5 : ffffffff815351b0 t6 : ffffffc80c173b50 > >>> status: 0000000200000100 badaddr: ffffffda23b0d000 cause: 000000000000000c > >>> > >>> Given the current flaw in the set_memory_x implementation, the simplest > >>> solution is to fix machine_kexec() to remap control code page outside > >>> the linear mapping. Because the control code buffer was moved from the > >>> direct mapping area to the vmalloc location, we need an additional > >>> va_va_offset to fix up va_pa_offset. > >>> > >>> Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") > >>> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> > >>> Reported-by: Xing XiaoGuang <xingxg2008@163.com> > >>> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> > >>> Signed-off-by: Guo Ren <guoren@kernel.org> > >>> --- > >>> Changelog: > >>> V4: > >>> - Fixup va_pa_offset with additional va_va_offset. > >>> - Add Reported-by tag. > >>> > >>> V3: > >>> - Resume set_memory_x to set the _PAGE_EXEC attribute > >>> - Optimize the commit log with Alexandre advice > >>> > >>> V2: > >>> - Use vm_map_ram instead of modifying set_memory_x > >>> - Correct Fixes tag > >>> --- > >>> arch/riscv/include/asm/kexec.h | 1 + > >>> arch/riscv/kernel/machine_kexec.c | 18 +++++++++++++++--- > >>> 2 files changed, 16 insertions(+), 3 deletions(-) > >>> > >>> diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h > >>> index 2b56769cb530..17456e91476e 100644 > >>> --- a/arch/riscv/include/asm/kexec.h > >>> +++ b/arch/riscv/include/asm/kexec.h > >>> @@ -41,6 +41,7 @@ crash_setup_regs(struct pt_regs *newregs, > >>> struct kimage_arch { > >>> void *fdt; /* For CONFIG_KEXEC_FILE */ > >>> unsigned long fdt_addr; > >>> + void *control_code_buffer; > >>> }; > >>> > >>> extern const unsigned char riscv_kexec_relocate[]; > >>> diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c > >>> index 2d139b724bc8..60c1ef3c2232 100644 > >>> --- a/arch/riscv/kernel/machine_kexec.c > >>> +++ b/arch/riscv/kernel/machine_kexec.c > >>> @@ -86,7 +86,14 @@ machine_kexec_prepare(struct kimage *image) > >>> > >>> /* Copy the assembler code for relocation to the control page */ > >>> if (image->type != KEXEC_TYPE_CRASH) { > >>> - control_code_buffer = page_address(image->control_code_page); > >>> + control_code_buffer = vm_map_ram(&image->control_code_page, > >>> + KEXEC_CONTROL_PAGE_SIZE/PAGE_SIZE, > >>> + NUMA_NO_NODE); > >>> + if (control_code_buffer == NULL) { > >>> + pr_err("Failed to vm_map control page\n"); > >>> + return -ENOMEM; > >>> + } > >>> + > >>> control_code_buffer_sz = page_size(image->control_code_page); > >>> > >>> if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) { > >>> @@ -99,6 +106,8 @@ machine_kexec_prepare(struct kimage *image) > >>> > >>> /* Mark the control page executable */ > >>> set_memory_x((unsigned long) control_code_buffer, 1); > >>> + > >>> + internal->control_code_buffer = control_code_buffer; > >>> } > >>> > >>> return 0; > >>> @@ -211,7 +220,10 @@ machine_kexec(struct kimage *image) > >>> unsigned long this_cpu_id = __smp_processor_id(); > >>> unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id); > >>> unsigned long fdt_addr = internal->fdt_addr; > >>> - void *control_code_buffer = page_address(image->control_code_page); > >>> + void *control_code_buffer = internal->control_code_buffer; > >>> + unsigned long va_va_offset = > >>> + (unsigned long) page_address(image->control_code_page) > >>> + - (unsigned long) control_code_buffer; > >>> riscv_kexec_method kexec_method = NULL; > >>> > >>> #ifdef CONFIG_SMP > >>> @@ -234,6 +246,6 @@ machine_kexec(struct kimage *image) > >>> /* Jump to the relocation code */ > >>> pr_notice("Bye...\n"); > >>> kexec_method(first_ind_entry, jump_addr, fdt_addr, > >>> - this_hart_id, kernel_map.va_pa_offset); > >>> + this_hart_id, kernel_map.va_pa_offset - va_va_offset); > >>> unreachable(); > >>> } > >> > >> I started working on the set_memory fix and the first thing to do is to > >> prevent the use of PGD mapping, it's too cumbersome to propagate changes > >> at this level: IIRC x86 keeps a list of page tables to go through > >> whenever that happens, that's why Bjorn pre-allocated all the PGD > >> entries to cover the vmalloc region. > >> > >> So, to me, the simple fix for this issue is to prevent the use of PGD > >> mapping. What do you think? Does the following patch work? > > The PGD mapping is necessary (especially for Sv32, Sv39), and it has > > been solved under your first advice. I think limit set_memory_x usage > > is the smart choice for now. > > > If we use PGD mappings, we won't be able to change the protections or > remove pages from the linear mapping as we don't have a means to > synchronize all the page tables. Removing pages from the linear mapping > is used for example for memfd_secret and certainly other things so that > means using PGD mappings will break a few things. > > The benefits of PGD mappings for the linear mapping was not proven, and We need PGD mappings for Sv32. liner mapping with 4KB would cause a significant performance gap in the small core (memset stride with 4KB, PTW with every store). > even if I agree we should do our best to keep the largest mapping > possible just in case, implementing a page table synchronization seems > very cumbersome (x86 does that though). > > I'm not opposed to your solution, but: > > - either we remove the PGD mappings, and your problem is fixed, This patch limits control_buffer_code into a 4KB page mapping entry. I don't think they are the same solution, even you remove the PGD mappings. > > - or we keep PGD mappings, implement a page table synchronization, and > your problem is fixed. We need your synchronization, but not for this case. > > And since we need to fix this larger problem, I don't see the point of > this workaround. This patch is for kexec. See title riscv: kexec: tag. And I don't think your larger problem needs to be fixed. I agree with your first point that simply limit the usage of set_memory_x. > > Thanks, > > Alex > > > > > > > >> > >> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c > >> index 70fb31960b63..6dd12443bfa4 100644 > >> --- a/arch/riscv/mm/init.c > >> +++ b/arch/riscv/mm/init.c > >> @@ -662,13 +662,12 @@ void __init create_pgd_mapping(pgd_t *pgdp, > >> static uintptr_t __init best_map_size(phys_addr_t pa, uintptr_t va, > >> phys_addr_t size) > >> { > >> - if (!(pa & (PGDIR_SIZE - 1)) && !(va & (PGDIR_SIZE - 1)) && size > >> >= PGDIR_SIZE) > >> - return PGDIR_SIZE; > >> - > >> - if (!(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= > >> P4D_SIZE) > >> + if (pgtable_l5_enabled && > >> + !(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= > >> P4D_SIZE) > >> return P4D_SIZE; > >> > >> - if (!(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= > >> PUD_SIZE) > >> + if (pgtable_l4_enabled && > >> + !(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= > >> PUD_SIZE) > >> return PUD_SIZE; > >> > >> if (!(pa & (PMD_SIZE - 1)) && !(va & (PMD_SIZE - 1)) && size >= > >> PMD_SIZE) > >> > >> > >> Thanks, > >> > >> Alex > >> > >
On Fri, Jul 21, 2023 at 08:14:42PM -0400, Guo Ren wrote: > On Thu, Jul 20, 2023 at 4:28 AM Alexandre Ghiti <alex@ghiti.fr> wrote: > > > > > > On 18/07/2023 14:30, Guo Ren wrote: > > > On Mon, Jul 17, 2023 at 9:17 PM Alexandre Ghiti <alex@ghiti.fr> wrote: > > >> > > >> On 14/07/2023 12:36, guoren@kernel.org wrote: > > >>> From: Guo Ren <guoren@linux.alibaba.com> > > >>> > > >>> The machine_kexec() uses set_memory_x to modify the direct mapping > > >>> attributes from RW to RWX. The current implementation of set_memory_x > > >>> does not split hugepages in the linear mapping and then when a PGD > > >>> mapping is used, the whole PGD is marked as executable. But changing > > >>> the permissions at the PGD level must be propagated to all the page > > >>> tables. When kexec jumps into control_buffer, the instruction page > > >>> fault happens, and there is no minor_pagefault for it, then panic. > > >>> > > >>> The bug is found on an MMU_sv39 machine, and the direct mapping used a > > >>> 1GB PUD, the pgd entries. Here is the bug output: > > >>> > > >>> kexec_core: Starting new kernel > > >>> Will call new kernel at 00300000 from hart id 0 > > >>> FDT image at 747c7000 > > >>> Bye... > > >>> Unable to handle kernel paging request at virtual address ffffffda23b0d000 > > >>> Oops [#1] > > >>> Modules linked in: > > >>> CPU: 0 PID: 53 Comm: uinit Not tainted 6.4.0-rc6 #15 > > >>> Hardware name: Sophgo Mango (DT) > > >>> epc : 0xffffffda23b0d000 > > >>> ra : machine_kexec+0xa6/0xb0 > > >>> epc : ffffffda23b0d000 ra : ffffffff80008272 sp : ffffffc80c173d10 > > >>> gp : ffffffff8150e1e0 tp : ffffffd9073d2c40 t0 : 0000000000000000 > > >>> t1 : 0000000000000042 t2 : 6567616d69205444 s0 : ffffffc80c173d50 > > >>> s1 : ffffffd9076c4800 a0 : ffffffd9076c4800 a1 : 0000000000300000 > > >>> a2 : 00000000747c7000 a3 : 0000000000000000 a4 : ffffffd800000000 > > >>> a5 : 0000000000000000 a6 : ffffffd903619c40 a7 : ffffffffffffffff > > >>> s2 : ffffffda23b0d000 s3 : 0000000000300000 s4 : 00000000747c7000 > > >>> s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 > > >>> s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 > > >>> s11: 0000003f940001a0 t3 : ffffffff815351af t4 : ffffffff815351af > > >>> t5 : ffffffff815351b0 t6 : ffffffc80c173b50 > > >>> status: 0000000200000100 badaddr: ffffffda23b0d000 cause: 000000000000000c > > >>> > > >>> Given the current flaw in the set_memory_x implementation, the simplest > > >>> solution is to fix machine_kexec() to remap control code page outside > > >>> the linear mapping. Because the control code buffer was moved from the > > >>> direct mapping area to the vmalloc location, we need an additional > > >>> va_va_offset to fix up va_pa_offset. > > >>> > > >>> Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") > > >>> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> > > >>> Reported-by: Xing XiaoGuang <xingxg2008@163.com> > > >>> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> > > >>> Signed-off-by: Guo Ren <guoren@kernel.org> > > >>> --- > > >>> Changelog: > > >>> V4: > > >>> - Fixup va_pa_offset with additional va_va_offset. > > >>> - Add Reported-by tag. > > >>> > > >>> V3: > > >>> - Resume set_memory_x to set the _PAGE_EXEC attribute > > >>> - Optimize the commit log with Alexandre advice > > >>> > > >>> V2: > > >>> - Use vm_map_ram instead of modifying set_memory_x > > >>> - Correct Fixes tag > > >>> --- > > >>> arch/riscv/include/asm/kexec.h | 1 + > > >>> arch/riscv/kernel/machine_kexec.c | 18 +++++++++++++++--- > > >>> 2 files changed, 16 insertions(+), 3 deletions(-) > > >>> > > >>> diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h > > >>> index 2b56769cb530..17456e91476e 100644 > > >>> --- a/arch/riscv/include/asm/kexec.h > > >>> +++ b/arch/riscv/include/asm/kexec.h > > >>> @@ -41,6 +41,7 @@ crash_setup_regs(struct pt_regs *newregs, > > >>> struct kimage_arch { > > >>> void *fdt; /* For CONFIG_KEXEC_FILE */ > > >>> unsigned long fdt_addr; > > >>> + void *control_code_buffer; > > >>> }; > > >>> > > >>> extern const unsigned char riscv_kexec_relocate[]; > > >>> diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c > > >>> index 2d139b724bc8..60c1ef3c2232 100644 > > >>> --- a/arch/riscv/kernel/machine_kexec.c > > >>> +++ b/arch/riscv/kernel/machine_kexec.c > > >>> @@ -86,7 +86,14 @@ machine_kexec_prepare(struct kimage *image) > > >>> > > >>> /* Copy the assembler code for relocation to the control page */ > > >>> if (image->type != KEXEC_TYPE_CRASH) { > > >>> - control_code_buffer = page_address(image->control_code_page); > > >>> + control_code_buffer = vm_map_ram(&image->control_code_page, > > >>> + KEXEC_CONTROL_PAGE_SIZE/PAGE_SIZE, > > >>> + NUMA_NO_NODE); > > >>> + if (control_code_buffer == NULL) { > > >>> + pr_err("Failed to vm_map control page\n"); > > >>> + return -ENOMEM; > > >>> + } > > >>> + > > >>> control_code_buffer_sz = page_size(image->control_code_page); > > >>> > > >>> if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) { > > >>> @@ -99,6 +106,8 @@ machine_kexec_prepare(struct kimage *image) > > >>> > > >>> /* Mark the control page executable */ > > >>> set_memory_x((unsigned long) control_code_buffer, 1); > > >>> + > > >>> + internal->control_code_buffer = control_code_buffer; > > >>> } > > >>> > > >>> return 0; > > >>> @@ -211,7 +220,10 @@ machine_kexec(struct kimage *image) > > >>> unsigned long this_cpu_id = __smp_processor_id(); > > >>> unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id); > > >>> unsigned long fdt_addr = internal->fdt_addr; > > >>> - void *control_code_buffer = page_address(image->control_code_page); > > >>> + void *control_code_buffer = internal->control_code_buffer; > > >>> + unsigned long va_va_offset = > > >>> + (unsigned long) page_address(image->control_code_page) > > >>> + - (unsigned long) control_code_buffer; > > >>> riscv_kexec_method kexec_method = NULL; > > >>> > > >>> #ifdef CONFIG_SMP > > >>> @@ -234,6 +246,6 @@ machine_kexec(struct kimage *image) > > >>> /* Jump to the relocation code */ > > >>> pr_notice("Bye...\n"); > > >>> kexec_method(first_ind_entry, jump_addr, fdt_addr, > > >>> - this_hart_id, kernel_map.va_pa_offset); > > >>> + this_hart_id, kernel_map.va_pa_offset - va_va_offset); > > >>> unreachable(); > > >>> } > > >> > > >> I started working on the set_memory fix and the first thing to do is to > > >> prevent the use of PGD mapping, it's too cumbersome to propagate changes > > >> at this level: IIRC x86 keeps a list of page tables to go through > > >> whenever that happens, that's why Bjorn pre-allocated all the PGD > > >> entries to cover the vmalloc region. > > >> > > >> So, to me, the simple fix for this issue is to prevent the use of PGD > > >> mapping. What do you think? Does the following patch work? > > > The PGD mapping is necessary (especially for Sv32, Sv39), and it has > > > been solved under your first advice. I think limit set_memory_x usage > > > is the smart choice for now. > > > > > > If we use PGD mappings, we won't be able to change the protections or > > remove pages from the linear mapping as we don't have a means to > > synchronize all the page tables. Removing pages from the linear mapping > > is used for example for memfd_secret and certainly other things so that > > means using PGD mappings will break a few things. > > > > The benefits of PGD mappings for the linear mapping was not proven, and > We need PGD mappings for Sv32. liner mapping with 4KB would cause a > significant performance gap in the small core (memset stride with 4KB, > PTW with every store). > > > even if I agree we should do our best to keep the largest mapping > > possible just in case, implementing a page table synchronization seems > > very cumbersome (x86 does that though). > > > > I'm not opposed to your solution, but: Hi Alexandre & Palmer, This patch is about fixing the problem of kexec, not solving the larger scale of set_memory_x/pgd_mapping problems. And only limiting the changes in the control buffer page is also necessary. Kexec shouldn't modify direct mapping attributes. Here is the flow of sg2042: zsbl -> opensbi -> linux-boot (kexec boot next stage) -> linux (ubuntu/Fedora) Could we merge this patch first? Best Regards Guo Ren > > > > - either we remove the PGD mappings, and your problem is fixed, > This patch limits control_buffer_code into a 4KB page mapping entry. I > don't think they are the same solution, even you remove the PGD > mappings. > > > > > - or we keep PGD mappings, implement a page table synchronization, and > > your problem is fixed. > We need your synchronization, but not for this case. > > > > > And since we need to fix this larger problem, I don't see the point of > > this workaround. > This patch is for kexec. See title riscv: kexec: tag. > > And I don't think your larger problem needs to be fixed. I agree with > your first point that simply limit the usage of set_memory_x. > > > > > Thanks, > > > > Alex > > > > > > > > > > > > >> > > >> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c > > >> index 70fb31960b63..6dd12443bfa4 100644 > > >> --- a/arch/riscv/mm/init.c > > >> +++ b/arch/riscv/mm/init.c > > >> @@ -662,13 +662,12 @@ void __init create_pgd_mapping(pgd_t *pgdp, > > >> static uintptr_t __init best_map_size(phys_addr_t pa, uintptr_t va, > > >> phys_addr_t size) > > >> { > > >> - if (!(pa & (PGDIR_SIZE - 1)) && !(va & (PGDIR_SIZE - 1)) && size > > >> >= PGDIR_SIZE) > > >> - return PGDIR_SIZE; > > >> - > > >> - if (!(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= > > >> P4D_SIZE) > > >> + if (pgtable_l5_enabled && > > >> + !(pa & (P4D_SIZE - 1)) && !(va & (P4D_SIZE - 1)) && size >= > > >> P4D_SIZE) > > >> return P4D_SIZE; > > >> > > >> - if (!(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= > > >> PUD_SIZE) > > >> + if (pgtable_l4_enabled && > > >> + !(pa & (PUD_SIZE - 1)) && !(va & (PUD_SIZE - 1)) && size >= > > >> PUD_SIZE) > > >> return PUD_SIZE; > > >> > > >> if (!(pa & (PMD_SIZE - 1)) && !(va & (PMD_SIZE - 1)) && size >= > > >> PMD_SIZE) > > >> > > >> > > >> Thanks, > > >> > > >> Alex > > >> > > > > > > > -- > Best Regards > Guo Ren > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv
diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h index 2b56769cb530..17456e91476e 100644 --- a/arch/riscv/include/asm/kexec.h +++ b/arch/riscv/include/asm/kexec.h @@ -41,6 +41,7 @@ crash_setup_regs(struct pt_regs *newregs, struct kimage_arch { void *fdt; /* For CONFIG_KEXEC_FILE */ unsigned long fdt_addr; + void *control_code_buffer; }; extern const unsigned char riscv_kexec_relocate[]; diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c index 2d139b724bc8..60c1ef3c2232 100644 --- a/arch/riscv/kernel/machine_kexec.c +++ b/arch/riscv/kernel/machine_kexec.c @@ -86,7 +86,14 @@ machine_kexec_prepare(struct kimage *image) /* Copy the assembler code for relocation to the control page */ if (image->type != KEXEC_TYPE_CRASH) { - control_code_buffer = page_address(image->control_code_page); + control_code_buffer = vm_map_ram(&image->control_code_page, + KEXEC_CONTROL_PAGE_SIZE/PAGE_SIZE, + NUMA_NO_NODE); + if (control_code_buffer == NULL) { + pr_err("Failed to vm_map control page\n"); + return -ENOMEM; + } + control_code_buffer_sz = page_size(image->control_code_page); if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) { @@ -99,6 +106,8 @@ machine_kexec_prepare(struct kimage *image) /* Mark the control page executable */ set_memory_x((unsigned long) control_code_buffer, 1); + + internal->control_code_buffer = control_code_buffer; } return 0; @@ -211,7 +220,10 @@ machine_kexec(struct kimage *image) unsigned long this_cpu_id = __smp_processor_id(); unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id); unsigned long fdt_addr = internal->fdt_addr; - void *control_code_buffer = page_address(image->control_code_page); + void *control_code_buffer = internal->control_code_buffer; + unsigned long va_va_offset = + (unsigned long) page_address(image->control_code_page) + - (unsigned long) control_code_buffer; riscv_kexec_method kexec_method = NULL; #ifdef CONFIG_SMP @@ -234,6 +246,6 @@ machine_kexec(struct kimage *image) /* Jump to the relocation code */ pr_notice("Bye...\n"); kexec_method(first_ind_entry, jump_addr, fdt_addr, - this_hart_id, kernel_map.va_pa_offset); + this_hart_id, kernel_map.va_pa_offset - va_va_offset); unreachable(); }