| Message ID | 20230719102057.22329-6-minda.chen@starfivetech.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Delegated to: | Conor Dooley |
| Headers | show |
| Series | Refactoring Microchip PolarFire PCIe driver | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/tree_selection | fail | Failed to apply to next/pending-fixes, riscv/for-next or riscv/master |
On 19/07/2023 12:20, Minda Chen wrote: > Add PLDA XpressRICH host controller dt-bindings. Both Microchip > PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH > PCIe host controller IP. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > Reviewed-by: Hal Feng <hal.feng@starfivetech.com> > --- > .../pci/plda,xpressrich-pcie-host.yaml | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml > > diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml > new file mode 100644 > index 000000000000..10a10862a078 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml > @@ -0,0 +1,66 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: PLDA XpressRICH PCIe host controller > + > +maintainers: > + - Daire McNamara <daire.mcnamara@microchip.com> > + - Minda Chen <minda.chen@starfivetech.com> > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + - $ref: plda,xpressrich-pcie-common.yaml# > + - $ref: /schemas/interrupt-controller/msi-controller.yaml# > + > +properties: > + compatible: > + const: plda,xpressrich-pcie-host > + > +required: > + - compatible > + - reg > + - reg-names > + - "#interrupt-cells" > + - interrupts > + - interrupt-map-mask > + - interrupt-map > + - msi-controller Your common schema should require properties which it defines. Here you should require only difference or new properties. > + > +unevaluatedProperties: false > + > +examples: > + - | > + soc { > + #address-cells = <2>; Use 4 spaces for example indentation. > + #size-cells = <2>; > + pcie0: pcie@12000000 { Best regards, Krzysztof
On Wed, Jul 19, 2023 at 06:20:53PM +0800, Minda Chen wrote: > Add PLDA XpressRICH host controller dt-bindings. Both Microchip > PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH > PCIe host controller IP. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > Reviewed-by: Hal Feng <hal.feng@starfivetech.com> > --- > .../pci/plda,xpressrich-pcie-host.yaml | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml > > diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml > new file mode 100644 > index 000000000000..10a10862a078 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml > @@ -0,0 +1,66 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: PLDA XpressRICH PCIe host controller > + > +maintainers: > + - Daire McNamara <daire.mcnamara@microchip.com> > + - Minda Chen <minda.chen@starfivetech.com> > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + - $ref: plda,xpressrich-pcie-common.yaml# > + - $ref: /schemas/interrupt-controller/msi-controller.yaml# > + > +properties: > + compatible: > + const: plda,xpressrich-pcie-host What h/w is this in? I don't see why this is needed. You have the common schema for the IP block and then the Microchip and Starfive schemas for the 2 implementations. Rob
On 2023/7/20 6:29, Rob Herring wrote: > On Wed, Jul 19, 2023 at 06:20:53PM +0800, Minda Chen wrote: >> Add PLDA XpressRICH host controller dt-bindings. Both Microchip >> PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH >> PCIe host controller IP. >> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> >> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> >> --- >> .../pci/plda,xpressrich-pcie-host.yaml | 66 +++++++++++++++++++ >> 1 file changed, 66 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml >> >> diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml >> new file mode 100644 >> index 000000000000..10a10862a078 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml >> @@ -0,0 +1,66 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: PLDA XpressRICH PCIe host controller >> + >> +maintainers: >> + - Daire McNamara <daire.mcnamara@microchip.com> >> + - Minda Chen <minda.chen@starfivetech.com> >> + >> +allOf: >> + - $ref: /schemas/pci/pci-bus.yaml# >> + - $ref: plda,xpressrich-pcie-common.yaml# >> + - $ref: /schemas/interrupt-controller/msi-controller.yaml# >> + >> +properties: >> + compatible: >> + const: plda,xpressrich-pcie-host > > What h/w is this in? I don't see why this is needed. You have the common > schema for the IP block and then the Microchip and Starfive schemas for > the 2 implementations. > > Rob OK. I will delete this patch and pcie-plda-plat.c
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml new file mode 100644 index 000000000000..10a10862a078 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PLDA XpressRICH PCIe host controller + +maintainers: + - Daire McNamara <daire.mcnamara@microchip.com> + - Minda Chen <minda.chen@starfivetech.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: plda,xpressrich-pcie-common.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + const: plda,xpressrich-pcie-host + +required: + - compatible + - reg + - reg-names + - "#interrupt-cells" + - interrupts + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie0: pcie@12000000 { + compatible = "plda,xpressrich-pcie-host"; + reg = <0x0 0x12000000 0x0 0x00010000>, + <0x0 0x43000000 0x0 0x00010000>; + reg-names = "host", "cfg"; + ranges = <0x03000000 0x0 0x88000000 0x0 0x88000000 0x0 0x04000000>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <131>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + interrupt-parent = <&plic0>; + msi-parent = <&pcie0>; + msi-controller; + bus-range = <0x00 0x7f>; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + };