| Message ID | 20230724-th1520-emmc-v2-4-132ed2e2171e@baylibre.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | RISC-V: Add basic eMMC support for BeagleV Ahead | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/tree_selection | fail | Failed to apply to next/pending-fixes, riscv/for-next or riscv/master |
On Fri, Aug 04, 2023 at 08:14:48PM -0700, Drew Fustini wrote: > Add basic support for the T-Head TH1520 SoC mmc controller with the new > compatible "thead,th1520-dwcmshc". > > However, quirks are currently set to disable DMA and use PIO. The proper > settings for DMA support still need to be determined. Hi Drew, Thank you for this patch. I think we need to make DMA work even in the first version. Several comments below. > > Another issue is th1520-specific code for MMC_TIMING_MMC_HS400 in > dwcmshc_set_uhs_signaling() will run on all platforms which is not > correct. One solution could be to add a th1520 flag to dwcmshc_priv but > that is hacky. Another solution could be to set the set_uhs_signaling op > in sdhci_dwcmshc_th1520_ops to a th1520-specific function. However, that > new function would have to duplicate all the code in the current > dwcmshc_set_uhs_signaling(). > > Signed-off-by: Drew Fustini <dfustini@baylibre.com> > --- > drivers/mmc/host/sdhci-of-dwcmshc.c | 336 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 336 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > index e68cd87998c8..d35e204cdb16 100644 > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > @@ -71,6 +71,63 @@ > (((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0)) > #define RK35xx_MAX_CLKS 3 > > +/* T-Head specific registers */ I guess this may not be T-HEAD specific but dwc phy, could you please check? > +#define DWC_MSHC_PTR_PHY_R 0x300 > +#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) > +#define PHY_RSTN 0x0 > +#define PAD_SP 0x10 > +#define PAD_SN 0x14 > + > +#define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04) > +#define PHY_DATAPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x06) > +#define PHY_CLKPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x08) > +#define PHY_STBPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0a) > +#define PHY_RSTNPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0c) > +#define RXSEL 0x0 > +#define WEAKPULL_EN 0x3 > +#define TXSLEW_CTRL_P 0x5 > +#define TXSLEW_CTRL_N 0x9 > + > +#define PHY_PADTEST_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0e) > +#define PHY_PADTEST_OUT_R (DWC_MSHC_PTR_PHY_R + 0x10) > +#define PHY_PADTEST_IN_R (DWC_MSHC_PTR_PHY_R + 0x12) > +#define PHY_PRBS_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x18) > +#define PHY_PHYLBK_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1a) > +#define PHY_COMMDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1c) > + > +#define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d) > +#define UPDATE_DC 0x4 > + > +#define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e) > +#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20) > +#define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21) > +#define INPSEL_CNFG 2 > + > +#define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24) > +#define DLL_EN 0x0 > + > +#define PHY_DLL_CNFG1_R (DWC_MSHC_PTR_PHY_R + 0x25) > +#define PHY_DLL_CNFG2_R (DWC_MSHC_PTR_PHY_R + 0x26) > +#define PHY_DLLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x28) > +#define SLV_INPSEL 0x5 > + > +#define P_VENDOR_SPECIFIC_AREA 0x500 > +#define EMMC_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x2c) > +#define AT_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x40) > +#define AT_EN 0x0 > +#define CI_SEL 0x1 > +#define SWIN_TH_EN 0x2 > +#define RPT_TUNE_ERR 0x3 > +#define SW_TUNE_EN 0x4 > +#define WIN_EDGE_SEL 0x8 > +#define TUNE_CLK_STOP_EN 0x10 > +#define PRE_CHANGE_DLY 0x11 > +#define POST_CHANGE_DLY 0x13 > +#define SWIN_TH_VAL 0x18 > + > +#define DELAY_LINE_HS400 24 > +#define DELAY_LINE_DEFAULT 50 > + > #define BOUNDARY_OK(addr, len) \ > ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1))) > > @@ -91,6 +148,10 @@ struct dwcmshc_priv { > struct clk *bus_clk; > int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */ > void *priv; /* pointer to SoC private stuff */ > + uint32_t delay_line; > + bool non_removable; can be replaced with mmc_host.caps & MMC_CAP_NONREMOVABLE > + bool pull_up_en; > + bool io_fixed_1v8; replace them with flag? > }; > > /* > @@ -156,11 +217,171 @@ static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq) > sdhci_request(mmc, mrq); > } > > +static void sdhci_phy_1_8v_init_no_pull(struct sdhci_host *host) > +{ > + uint32_t val; > + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); > + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); > + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); These magic numbers need a proper macro definitions. > + > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > + val &= ~(1 << 4); ditto > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > + > + > + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); > + sdhci_writew(host, val | 1, PHY_CMDPAD_CNFG_R); > + > + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); > + sdhci_writew(host, val | 1, PHY_DATAPAD_CNFG_R); > + > + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); > + sdhci_writew(host, val | 1, PHY_RSTNPAD_CNFG_R); > + > + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); > + sdhci_writew(host, val | 1, PHY_STBPAD_CNFG_R); > + > + val = sdhci_readb(host, PHY_DLL_CTRL_R); > + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); > +} > + > +static void sdhci_phy_3_3v_init_no_pull(struct sdhci_host *host) > +{ > + uint32_t val; > + > + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); > + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); > + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); > + > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > + val &= ~(1 << 4); > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > + > + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); > + sdhci_writew(host, val | 2, PHY_CMDPAD_CNFG_R); > + > + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); > + sdhci_writew(host, val | 2, PHY_DATAPAD_CNFG_R); > + > + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); > + sdhci_writew(host, val | 2, PHY_RSTNPAD_CNFG_R); > + > + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); > + sdhci_writew(host, val | 2, PHY_STBPAD_CNFG_R); > + > + val = sdhci_readb(host, PHY_DLL_CTRL_R); > + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); > +} > + > +static void th1520_phy_1_8v_init(struct sdhci_host *host) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > + u32 val; > + > + if (!priv) > + return; > + > + if (priv->pull_up_en == 0) { > + sdhci_phy_1_8v_init_no_pull(host); > + return; > + } > + > + /* set driving force */ > + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); > + > + /* disable delay lane */ > + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); > + > + /* set delay lane */ > + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); > + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); > + > + /* enable delay lane */ > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > + val &= ~(1 << UPDATE_DC); > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > + > + val = (1 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); > + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); > + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); > + > + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); > + > + val = (1 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); > + > + /* enable data strobe mode */ > + sdhci_writeb(host, 3 << SLV_INPSEL, PHY_DLLDL_CNFG_R); > + sdhci_writeb(host, (1 << DLL_EN), PHY_DLL_CTRL_R); > +} > + > +static void th1520_phy_3_3v_init(struct sdhci_host *host) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > + u32 val; > + > + if (priv->pull_up_en == 0) { > + sdhci_phy_3_3v_init_no_pull(host); > + return; > + } > + > + /* set driving force */ > + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); > + > + /* disable delay lane */ > + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); > + > + /* set delay lane */ > + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); > + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); > + > + /* enable delay lane */ > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > + val &= ~(1 << UPDATE_DC); > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > + > + val = (2 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); > + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); > + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); > + > + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); > + > + val = (2 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); > +} > + > + > +static void th1520_sdhci_set_phy(struct sdhci_host *host) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > + u8 emmc_ctl; > + > + /* Before power on, set PHY configs */ > + emmc_ctl = sdhci_readw(host, EMMC_CTRL_R); > + if (priv->non_removable) { > + th1520_phy_1_8v_init(host); > + emmc_ctl |= (1 << DWCMSHC_CARD_IS_EMMC); > + } else { > + th1520_phy_3_3v_init(host); > + emmc_ctl &=~(1 << DWCMSHC_CARD_IS_EMMC); > + } > + sdhci_writeb(host, emmc_ctl, EMMC_CTRL_R); > + sdhci_writeb(host, 0x25, PHY_DLL_CNFG1_R); magic 0x25 needs a meaningful MACRO definition. > +} > + > static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, > unsigned int timing) > { > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > + we don't need this extra blank line > u16 ctrl, ctrl_2; > > ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > @@ -188,7 +409,22 @@ static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, > ctrl_2 |= DWCMSHC_CTRL_HS400; > } > > + if (priv->io_fixed_1v8) > + ctrl_2 |= SDHCI_CTRL_VDD_180; > + > sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > + > + /* TODO: add check so that this only runs on th1520 */ this TODO needs to be solved since it affects other platforms such as NV and RK > + if (timing == MMC_TIMING_MMC_HS400) { > + /* disable auto tuning */ > + u32 reg = sdhci_readl(host, AT_CTRL_R); > + reg &= ~1; > + sdhci_writel(host, reg, AT_CTRL_R); > + priv->delay_line = DELAY_LINE_HS400; > + th1520_sdhci_set_phy(host); > + } else { > + sdhci_writeb(host, 0, PHY_DLLDL_CNFG_R); > + } > } > > static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc, > @@ -337,6 +573,49 @@ static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask) > sdhci_reset(host, mask); > } > > +static int th1520_execute_tuning(struct sdhci_host *host, u32 opcode) > +{ > + u32 val = 0; > + > + sdhci_writeb(host, 3 << INPSEL_CNFG, PHY_ATDL_CNFG_R); > + > + val = sdhci_readl(host, AT_CTRL_R); > + val &= ~((1 << CI_SEL) | (1 << RPT_TUNE_ERR) \ > + | (1 << SW_TUNE_EN) |(0xf << WIN_EDGE_SEL)); > + val |= (1 << AT_EN) | (1 << SWIN_TH_EN) | (1 << TUNE_CLK_STOP_EN)\ > + | (1 << PRE_CHANGE_DLY) | (3 << POST_CHANGE_DLY) | (9 << SWIN_TH_VAL); > + > + sdhci_writel(host, val, AT_CTRL_R); > + > + val = sdhci_readl(host, AT_CTRL_R); > + if(!(val & (1 << AT_EN))) { > + pr_warn("%s(): auto tuning is not enabled", __func__); AFAIK, the controller supports both auto tuning and sw tuning. > + return -1; can we replace -1 with meaningful error number? > + } > + > + val &= ~(1 << AT_EN); > + sdhci_writel(host, val, AT_CTRL_R); > + > + return 0; > +} > + > +static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > + u16 ctrl_2; > + > + sdhci_reset(host, mask); > + > + if(priv->io_fixed_1v8){ > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > + if(! (ctrl_2 & SDHCI_CTRL_VDD_180)){ > + ctrl_2 |= SDHCI_CTRL_VDD_180; > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > + } > + } > +} > + > static const struct sdhci_ops sdhci_dwcmshc_ops = { > .set_clock = sdhci_set_clock, > .set_bus_width = sdhci_set_bus_width, > @@ -355,6 +634,17 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { > .adma_write_desc = dwcmshc_adma_write_desc, > }; > > +static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = { > + .set_clock = sdhci_set_clock, > + .set_bus_width = sdhci_set_bus_width, > + .set_uhs_signaling = dwcmshc_set_uhs_signaling, > + .get_max_clock = dwcmshc_get_max_clock, > + .reset = th1520_sdhci_reset, > + .adma_write_desc = dwcmshc_adma_write_desc, > + .voltage_switch = th1520_phy_1_8v_init, > + .platform_execute_tuning = &th1520_execute_tuning, > +}; > + > static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { > .ops = &sdhci_dwcmshc_ops, > .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, > @@ -378,6 +668,15 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = { > SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, > }; > > +static const struct sdhci_pltfm_data sdhci_dwcmshc_th1520_pdata = { > + .ops = &sdhci_dwcmshc_th1520_ops, > + > + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | > + SDHCI_QUIRK_BROKEN_DMA | > + SDHCI_QUIRK_BROKEN_ADMA, > + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > +}; > + > static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) > { > int err; > @@ -434,6 +733,10 @@ static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv > } > > static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { > + { > + .compatible = "thead,th1520-dwcmshc", > + .data = &sdhci_dwcmshc_th1520_pdata, > + }, > { > .compatible = "rockchip,rk3588-dwcmshc", > .data = &sdhci_dwcmshc_rk35xx_pdata, > @@ -541,6 +844,39 @@ static int dwcmshc_probe(struct platform_device *pdev) > goto err_clk; > } > > + if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) { > + > + priv->delay_line = DELAY_LINE_DEFAULT; > + > + if (device_property_present(&pdev->dev, "non-removable")) > + priv->non_removable = 1; > + else > + priv->non_removable = 0; > + > + if (device_property_present(&pdev->dev, "thead,pull-up")) > + priv->pull_up_en = 1; > + else > + priv->pull_up_en = 0; > + > + if (device_property_present(&pdev->dev, "thead,io-fixed-1v8")) > + priv->io_fixed_1v8 = true; > + else > + priv->io_fixed_1v8 = false; > + > + /* > + * start_signal_voltage_switch() will try 3.3V first > + * then 1.8V. Use SDHCI_SIGNALING_180 ranther than > + * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V > + * in sdhci_start_signal_voltage_switch(). > + */ > + if(priv->io_fixed_1v8){ > + host->flags &=~SDHCI_SIGNALING_330; > + host->flags |= SDHCI_SIGNALING_180; > + } > + > + sdhci_enable_v4_mode(host); > + } > + > #ifdef CONFIG_ACPI > if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) > sdhci_enable_v4_mode(host); > > -- > 2.34.1 >
On Sun, Aug 06, 2023 at 06:09:39PM +0800, Jisheng Zhang wrote: > On Fri, Aug 04, 2023 at 08:14:48PM -0700, Drew Fustini wrote: > > Add basic support for the T-Head TH1520 SoC mmc controller with the new > > compatible "thead,th1520-dwcmshc". > > > > However, quirks are currently set to disable DMA and use PIO. The proper > > settings for DMA support still need to be determined. > > Hi Drew, > > Thank you for this patch. I think we need to make DMA work even in the > first version. Thanks for your review. I agree that DMA should be made to work. When I remove the SDHCI_QUIRK_BROKEN_ADMA quirk, I see the following in the boot log [1]: [ 3.633611] mmc0: SDHCI controller on ffe7080000.mmc [ffe7080000.mmc] using ADMA 64-bit [ 3.723080] mmc0: ADMA error: 0x02000000 [ 4.327491] mmc0: error -5 whilst initialising MMC card I'm going to add some more debug output so I can better understand what exactly is failing. > > Several comments below. > > > > > Another issue is th1520-specific code for MMC_TIMING_MMC_HS400 in > > dwcmshc_set_uhs_signaling() will run on all platforms which is not > > correct. One solution could be to add a th1520 flag to dwcmshc_priv but > > that is hacky. Another solution could be to set the set_uhs_signaling op > > in sdhci_dwcmshc_th1520_ops to a th1520-specific function. However, that > > new function would have to duplicate all the code in the current > > dwcmshc_set_uhs_signaling(). > > > > Signed-off-by: Drew Fustini <dfustini@baylibre.com> > > --- > > drivers/mmc/host/sdhci-of-dwcmshc.c | 336 ++++++++++++++++++++++++++++++++++++ > > 1 file changed, 336 insertions(+) > > > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > > index e68cd87998c8..d35e204cdb16 100644 > > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > > @@ -71,6 +71,63 @@ > > (((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0)) > > #define RK35xx_MAX_CLKS 3 > > > > +/* T-Head specific registers */ > > I guess this may not be T-HEAD specific but dwc phy, could you please > check? Yes, I will try to find out if if this really is t-head specific or just standard for the DWC PHY. > > +#define DWC_MSHC_PTR_PHY_R 0x300 > > +#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) > > +#define PHY_RSTN 0x0 > > +#define PAD_SP 0x10 > > +#define PAD_SN 0x14 > > + > > +#define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04) > > +#define PHY_DATAPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x06) > > +#define PHY_CLKPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x08) > > +#define PHY_STBPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0a) > > +#define PHY_RSTNPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0c) > > +#define RXSEL 0x0 > > +#define WEAKPULL_EN 0x3 > > +#define TXSLEW_CTRL_P 0x5 > > +#define TXSLEW_CTRL_N 0x9 > > + > > +#define PHY_PADTEST_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0e) > > +#define PHY_PADTEST_OUT_R (DWC_MSHC_PTR_PHY_R + 0x10) > > +#define PHY_PADTEST_IN_R (DWC_MSHC_PTR_PHY_R + 0x12) > > +#define PHY_PRBS_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x18) > > +#define PHY_PHYLBK_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1a) > > +#define PHY_COMMDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1c) > > + > > +#define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d) > > +#define UPDATE_DC 0x4 > > + > > +#define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e) > > +#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20) > > +#define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21) > > +#define INPSEL_CNFG 2 > > + > > +#define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24) > > +#define DLL_EN 0x0 > > + > > +#define PHY_DLL_CNFG1_R (DWC_MSHC_PTR_PHY_R + 0x25) > > +#define PHY_DLL_CNFG2_R (DWC_MSHC_PTR_PHY_R + 0x26) > > +#define PHY_DLLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x28) > > +#define SLV_INPSEL 0x5 > > + > > +#define P_VENDOR_SPECIFIC_AREA 0x500 > > +#define EMMC_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x2c) > > +#define AT_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x40) > > +#define AT_EN 0x0 > > +#define CI_SEL 0x1 > > +#define SWIN_TH_EN 0x2 > > +#define RPT_TUNE_ERR 0x3 > > +#define SW_TUNE_EN 0x4 > > +#define WIN_EDGE_SEL 0x8 > > +#define TUNE_CLK_STOP_EN 0x10 > > +#define PRE_CHANGE_DLY 0x11 > > +#define POST_CHANGE_DLY 0x13 > > +#define SWIN_TH_VAL 0x18 > > + > > +#define DELAY_LINE_HS400 24 > > +#define DELAY_LINE_DEFAULT 50 > > + > > #define BOUNDARY_OK(addr, len) \ > > ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1))) > > > > @@ -91,6 +148,10 @@ struct dwcmshc_priv { > > struct clk *bus_clk; > > int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */ > > void *priv; /* pointer to SoC private stuff */ > > + uint32_t delay_line; > > + bool non_removable; > > can be replaced with mmc_host.caps & MMC_CAP_NONREMOVABLE Thank you, I'll change in the next version. > > > + bool pull_up_en; > > + bool io_fixed_1v8; > > replace them with flag? Do you mean that I should replace the above bool's with a single flags field in the struct where the bool's would become bit fields in flags? > > > }; > > > > /* > > @@ -156,11 +217,171 @@ static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq) > > sdhci_request(mmc, mrq); > > } > > > > +static void sdhci_phy_1_8v_init_no_pull(struct sdhci_host *host) > > +{ > > + uint32_t val; > > + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); > > + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); > > + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); > > These magic numbers need a proper macro definitions. I'll try to find out their meaning and document it. > > > + > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > + val &= ~(1 << 4); > > ditto > > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > + > > + > > + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); > > + sdhci_writew(host, val | 1, PHY_CMDPAD_CNFG_R); > > + > > + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); > > + sdhci_writew(host, val | 1, PHY_DATAPAD_CNFG_R); > > + > > + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); > > + sdhci_writew(host, val | 1, PHY_RSTNPAD_CNFG_R); > > + > > + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); > > + sdhci_writew(host, val | 1, PHY_STBPAD_CNFG_R); > > + > > + val = sdhci_readb(host, PHY_DLL_CTRL_R); > > + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); > > +} > > + > > +static void sdhci_phy_3_3v_init_no_pull(struct sdhci_host *host) > > +{ > > + uint32_t val; > > + > > + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); > > + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); > > + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); > > + > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > + val &= ~(1 << 4); > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > + > > + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); > > + sdhci_writew(host, val | 2, PHY_CMDPAD_CNFG_R); > > + > > + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); > > + sdhci_writew(host, val | 2, PHY_DATAPAD_CNFG_R); > > + > > + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); > > + sdhci_writew(host, val | 2, PHY_RSTNPAD_CNFG_R); > > + > > + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); > > + sdhci_writew(host, val | 2, PHY_STBPAD_CNFG_R); > > + > > + val = sdhci_readb(host, PHY_DLL_CTRL_R); > > + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); > > +} > > + > > +static void th1520_phy_1_8v_init(struct sdhci_host *host) > > +{ > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > + u32 val; > > + > > + if (!priv) > > + return; > > + > > + if (priv->pull_up_en == 0) { > > + sdhci_phy_1_8v_init_no_pull(host); > > + return; > > + } > > + > > + /* set driving force */ > > + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); > > + > > + /* disable delay lane */ > > + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); > > + > > + /* set delay lane */ > > + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); > > + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); > > + > > + /* enable delay lane */ > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > + val &= ~(1 << UPDATE_DC); > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > + > > + val = (1 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); > > + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); > > + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); > > + > > + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); > > + > > + val = (1 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); > > + > > + /* enable data strobe mode */ > > + sdhci_writeb(host, 3 << SLV_INPSEL, PHY_DLLDL_CNFG_R); > > + sdhci_writeb(host, (1 << DLL_EN), PHY_DLL_CTRL_R); > > +} > > + > > +static void th1520_phy_3_3v_init(struct sdhci_host *host) > > +{ > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > + u32 val; > > + > > + if (priv->pull_up_en == 0) { > > + sdhci_phy_3_3v_init_no_pull(host); > > + return; > > + } > > + > > + /* set driving force */ > > + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); > > + > > + /* disable delay lane */ > > + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); > > + > > + /* set delay lane */ > > + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); > > + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); > > + > > + /* enable delay lane */ > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > + val &= ~(1 << UPDATE_DC); > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > + > > + val = (2 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); > > + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); > > + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); > > + > > + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); > > + > > + val = (2 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); > > +} > > + > > + > > +static void th1520_sdhci_set_phy(struct sdhci_host *host) > > +{ > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > + u8 emmc_ctl; > > + > > + /* Before power on, set PHY configs */ > > + emmc_ctl = sdhci_readw(host, EMMC_CTRL_R); > > + if (priv->non_removable) { > > + th1520_phy_1_8v_init(host); > > + emmc_ctl |= (1 << DWCMSHC_CARD_IS_EMMC); > > + } else { > > + th1520_phy_3_3v_init(host); > > + emmc_ctl &=~(1 << DWCMSHC_CARD_IS_EMMC); > > + } > > + sdhci_writeb(host, emmc_ctl, EMMC_CTRL_R); > > + sdhci_writeb(host, 0x25, PHY_DLL_CNFG1_R); > > magic 0x25 needs a meaningful MACRO definition. Okay, I'll investigate the meaning of that value and define it. > > > +} > > + > > static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, > > unsigned int timing) > > { > > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > + > > we don't need this extra blank line Okay > > > u16 ctrl, ctrl_2; > > > > ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > > @@ -188,7 +409,22 @@ static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, > > ctrl_2 |= DWCMSHC_CTRL_HS400; > > } > > > > + if (priv->io_fixed_1v8) > > + ctrl_2 |= SDHCI_CTRL_VDD_180; > > + > > sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > > + > > + /* TODO: add check so that this only runs on th1520 */ > > this TODO needs to be solved since it affects other platforms such as NV > and RK Yes, I need to fix this. For the next version, I am considering adding a flag to dwcmshc_priv that would gate the following code block. > > + if (timing == MMC_TIMING_MMC_HS400) { > > + /* disable auto tuning */ > > + u32 reg = sdhci_readl(host, AT_CTRL_R); > > + reg &= ~1; > > + sdhci_writel(host, reg, AT_CTRL_R); > > + priv->delay_line = DELAY_LINE_HS400; > > + th1520_sdhci_set_phy(host); > > + } else { > > + sdhci_writeb(host, 0, PHY_DLLDL_CNFG_R); > > + } > > } > > > > static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc, > > @@ -337,6 +573,49 @@ static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask) > > sdhci_reset(host, mask); > > } > > > > +static int th1520_execute_tuning(struct sdhci_host *host, u32 opcode) > > +{ > > + u32 val = 0; > > + > > + sdhci_writeb(host, 3 << INPSEL_CNFG, PHY_ATDL_CNFG_R); > > + > > + val = sdhci_readl(host, AT_CTRL_R); > > + val &= ~((1 << CI_SEL) | (1 << RPT_TUNE_ERR) \ > > + | (1 << SW_TUNE_EN) |(0xf << WIN_EDGE_SEL)); > > + val |= (1 << AT_EN) | (1 << SWIN_TH_EN) | (1 << TUNE_CLK_STOP_EN)\ > > + | (1 << PRE_CHANGE_DLY) | (3 << POST_CHANGE_DLY) | (9 << SWIN_TH_VAL); > > + > > + sdhci_writel(host, val, AT_CTRL_R); > > + > > + val = sdhci_readl(host, AT_CTRL_R); > > + if(!(val & (1 << AT_EN))) { > > + pr_warn("%s(): auto tuning is not enabled", __func__); > > AFAIK, the controller supports both auto tuning and sw tuning. Okay, I'll have to investigate further why it is like this in the vendor kernel [2]. > > > + return -1; > > can we replace -1 with meaningful error number? > Yes, will do for next version. > > + } > > + > > + val &= ~(1 << AT_EN); > > + sdhci_writel(host, val, AT_CTRL_R); > > + > > + return 0; > > +} > > + > > +static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask) > > +{ > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > + u16 ctrl_2; > > + > > + sdhci_reset(host, mask); > > + > > + if(priv->io_fixed_1v8){ > > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > > + if(! (ctrl_2 & SDHCI_CTRL_VDD_180)){ > > + ctrl_2 |= SDHCI_CTRL_VDD_180; > > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > > + } > > + } > > +} > > + > > static const struct sdhci_ops sdhci_dwcmshc_ops = { > > .set_clock = sdhci_set_clock, > > .set_bus_width = sdhci_set_bus_width, > > @@ -355,6 +634,17 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { > > .adma_write_desc = dwcmshc_adma_write_desc, > > }; > > > > +static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = { > > + .set_clock = sdhci_set_clock, > > + .set_bus_width = sdhci_set_bus_width, > > + .set_uhs_signaling = dwcmshc_set_uhs_signaling, > > + .get_max_clock = dwcmshc_get_max_clock, > > + .reset = th1520_sdhci_reset, > > + .adma_write_desc = dwcmshc_adma_write_desc, > > + .voltage_switch = th1520_phy_1_8v_init, > > + .platform_execute_tuning = &th1520_execute_tuning, > > +}; > > + > > static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { > > .ops = &sdhci_dwcmshc_ops, > > .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, > > @@ -378,6 +668,15 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = { > > SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, > > }; > > > > +static const struct sdhci_pltfm_data sdhci_dwcmshc_th1520_pdata = { > > + .ops = &sdhci_dwcmshc_th1520_ops, > > + > > + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | > > + SDHCI_QUIRK_BROKEN_DMA | > > + SDHCI_QUIRK_BROKEN_ADMA, > > + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > > +}; > > + > > static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) > > { > > int err; > > @@ -434,6 +733,10 @@ static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv > > } > > > > static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { > > + { > > + .compatible = "thead,th1520-dwcmshc", > > + .data = &sdhci_dwcmshc_th1520_pdata, > > + }, > > { > > .compatible = "rockchip,rk3588-dwcmshc", > > .data = &sdhci_dwcmshc_rk35xx_pdata, > > @@ -541,6 +844,39 @@ static int dwcmshc_probe(struct platform_device *pdev) > > goto err_clk; > > } > > > > + if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) { > > + > > + priv->delay_line = DELAY_LINE_DEFAULT; > > + > > + if (device_property_present(&pdev->dev, "non-removable")) > > + priv->non_removable = 1; > > + else > > + priv->non_removable = 0; > > + > > + if (device_property_present(&pdev->dev, "thead,pull-up")) > > + priv->pull_up_en = 1; > > + else > > + priv->pull_up_en = 0; > > + > > + if (device_property_present(&pdev->dev, "thead,io-fixed-1v8")) > > + priv->io_fixed_1v8 = true; > > + else > > + priv->io_fixed_1v8 = false; > > + > > + /* > > + * start_signal_voltage_switch() will try 3.3V first > > + * then 1.8V. Use SDHCI_SIGNALING_180 ranther than > > + * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V > > + * in sdhci_start_signal_voltage_switch(). > > + */ > > + if(priv->io_fixed_1v8){ > > + host->flags &=~SDHCI_SIGNALING_330; > > + host->flags |= SDHCI_SIGNALING_180; > > + } > > + > > + sdhci_enable_v4_mode(host); > > + } > > + > > #ifdef CONFIG_ACPI > > if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) > > sdhci_enable_v4_mode(host); > > > > -- > > 2.34.1 > > Thank you, Drew [1] https://gist.github.com/pdp7/a8301b895c2dc293f2e0210e77e45e01 [2] https://git.beagleboard.org/beaglev-ahead/beaglev-ahead-linux/-/blob/beaglev-v5.10.113-1.1.2/drivers/mmc/host/sdhci-of-dwcmshc.c#L238
On Wed, Aug 16, 2023 at 02:17:16PM -0700, Drew Fustini wrote: > On Sun, Aug 06, 2023 at 06:09:39PM +0800, Jisheng Zhang wrote: > > On Fri, Aug 04, 2023 at 08:14:48PM -0700, Drew Fustini wrote: > > > Add basic support for the T-Head TH1520 SoC mmc controller with the new > > > compatible "thead,th1520-dwcmshc". > > > > > > However, quirks are currently set to disable DMA and use PIO. The proper > > > settings for DMA support still need to be determined. > > > > Hi Drew, > > > > Thank you for this patch. I think we need to make DMA work even in the > > first version. > > Thanks for your review. I agree that DMA should be made to work. > When I remove the SDHCI_QUIRK_BROKEN_ADMA quirk, I see the following in > the boot log [1]: > > [ 3.633611] mmc0: SDHCI controller on ffe7080000.mmc [ffe7080000.mmc] using ADMA 64-bit > [ 3.723080] mmc0: ADMA error: 0x02000000 > [ 4.327491] mmc0: error -5 whilst initialising MMC card > > I'm going to add some more debug output so I can better understand what > exactly is failing. > > > > > Several comments below. > > > > > > > > Another issue is th1520-specific code for MMC_TIMING_MMC_HS400 in > > > dwcmshc_set_uhs_signaling() will run on all platforms which is not > > > correct. One solution could be to add a th1520 flag to dwcmshc_priv but > > > that is hacky. Another solution could be to set the set_uhs_signaling op > > > in sdhci_dwcmshc_th1520_ops to a th1520-specific function. However, that > > > new function would have to duplicate all the code in the current > > > dwcmshc_set_uhs_signaling(). > > > > > > Signed-off-by: Drew Fustini <dfustini@baylibre.com> > > > --- > > > drivers/mmc/host/sdhci-of-dwcmshc.c | 336 ++++++++++++++++++++++++++++++++++++ > > > 1 file changed, 336 insertions(+) > > > > > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > > > index e68cd87998c8..d35e204cdb16 100644 > > > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > > > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > > > @@ -71,6 +71,63 @@ > > > (((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0)) > > > #define RK35xx_MAX_CLKS 3 > > > > > > +/* T-Head specific registers */ > > > > I guess this may not be T-HEAD specific but dwc phy, could you please > > check? It's not a standard DesginWare MMC PHY registers, and we modiified something. We could keep this code in custom first to make it work around and see how to merge it into standard DesginWare MMC PHY registers next. > > Yes, I will try to find out if if this really is t-head specific or just > standard for the DWC PHY. > > > > +#define DWC_MSHC_PTR_PHY_R 0x300 > > > +#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) > > > +#define PHY_RSTN 0x0 > > > +#define PAD_SP 0x10 > > > +#define PAD_SN 0x14 > > > + > > > +#define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04) > > > +#define PHY_DATAPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x06) > > > +#define PHY_CLKPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x08) > > > +#define PHY_STBPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0a) > > > +#define PHY_RSTNPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0c) > > > +#define RXSEL 0x0 > > > +#define WEAKPULL_EN 0x3 > > > +#define TXSLEW_CTRL_P 0x5 > > > +#define TXSLEW_CTRL_N 0x9 > > > + > > > +#define PHY_PADTEST_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0e) > > > +#define PHY_PADTEST_OUT_R (DWC_MSHC_PTR_PHY_R + 0x10) > > > +#define PHY_PADTEST_IN_R (DWC_MSHC_PTR_PHY_R + 0x12) > > > +#define PHY_PRBS_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x18) > > > +#define PHY_PHYLBK_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1a) > > > +#define PHY_COMMDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1c) > > > + > > > +#define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d) > > > +#define UPDATE_DC 0x4 > > > + > > > +#define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e) > > > +#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20) > > > +#define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21) > > > +#define INPSEL_CNFG 2 > > > + > > > +#define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24) > > > +#define DLL_EN 0x0 > > > + > > > +#define PHY_DLL_CNFG1_R (DWC_MSHC_PTR_PHY_R + 0x25) > > > +#define PHY_DLL_CNFG2_R (DWC_MSHC_PTR_PHY_R + 0x26) > > > +#define PHY_DLLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x28) > > > +#define SLV_INPSEL 0x5 > > > + > > > +#define P_VENDOR_SPECIFIC_AREA 0x500 > > > +#define EMMC_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x2c) > > > +#define AT_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x40) > > > +#define AT_EN 0x0 > > > +#define CI_SEL 0x1 > > > +#define SWIN_TH_EN 0x2 > > > +#define RPT_TUNE_ERR 0x3 > > > +#define SW_TUNE_EN 0x4 > > > +#define WIN_EDGE_SEL 0x8 > > > +#define TUNE_CLK_STOP_EN 0x10 > > > +#define PRE_CHANGE_DLY 0x11 > > > +#define POST_CHANGE_DLY 0x13 > > > +#define SWIN_TH_VAL 0x18 > > > + > > > +#define DELAY_LINE_HS400 24 > > > +#define DELAY_LINE_DEFAULT 50 > > > + > > > #define BOUNDARY_OK(addr, len) \ > > > ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1))) > > > > > > @@ -91,6 +148,10 @@ struct dwcmshc_priv { > > > struct clk *bus_clk; > > > int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */ > > > void *priv; /* pointer to SoC private stuff */ > > > + uint32_t delay_line; > > > + bool non_removable; > > > > can be replaced with mmc_host.caps & MMC_CAP_NONREMOVABLE > > Thank you, I'll change in the next version. > > > > > > + bool pull_up_en; > > > + bool io_fixed_1v8; > > > > replace them with flag? > > Do you mean that I should replace the above bool's with a single flags > field in the struct where the bool's would become bit fields in flags? > > > > > > }; > > > > > > /* > > > @@ -156,11 +217,171 @@ static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq) > > > sdhci_request(mmc, mrq); > > > } > > > > > > +static void sdhci_phy_1_8v_init_no_pull(struct sdhci_host *host) > > > +{ > > > + uint32_t val; > > > + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); > > > + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); > > > + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); > > > > These magic numbers need a proper macro definitions. > > I'll try to find out their meaning and document it. > > > > > > + > > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > > + val &= ~(1 << 4); > > > > ditto > > > > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > > + > > > + > > > + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); > > > + sdhci_writew(host, val | 1, PHY_CMDPAD_CNFG_R); > > > + > > > + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); > > > + sdhci_writew(host, val | 1, PHY_DATAPAD_CNFG_R); > > > + > > > + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); > > > + sdhci_writew(host, val | 1, PHY_RSTNPAD_CNFG_R); > > > + > > > + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); > > > + sdhci_writew(host, val | 1, PHY_STBPAD_CNFG_R); > > > + > > > + val = sdhci_readb(host, PHY_DLL_CTRL_R); > > > + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); > > > +} > > > + > > > +static void sdhci_phy_3_3v_init_no_pull(struct sdhci_host *host) > > > +{ > > > + uint32_t val; > > > + > > > + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); > > > + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); > > > + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); > > > + > > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > > + val &= ~(1 << 4); > > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > > + > > > + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); > > > + sdhci_writew(host, val | 2, PHY_CMDPAD_CNFG_R); > > > + > > > + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); > > > + sdhci_writew(host, val | 2, PHY_DATAPAD_CNFG_R); > > > + > > > + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); > > > + sdhci_writew(host, val | 2, PHY_RSTNPAD_CNFG_R); > > > + > > > + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); > > > + sdhci_writew(host, val | 2, PHY_STBPAD_CNFG_R); > > > + > > > + val = sdhci_readb(host, PHY_DLL_CTRL_R); > > > + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); > > > +} > > > + > > > +static void th1520_phy_1_8v_init(struct sdhci_host *host) > > > +{ > > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > > + u32 val; > > > + > > > + if (!priv) > > > + return; > > > + > > > + if (priv->pull_up_en == 0) { > > > + sdhci_phy_1_8v_init_no_pull(host); > > > + return; > > > + } > > > + > > > + /* set driving force */ > > > + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); > > > + > > > + /* disable delay lane */ > > > + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); > > > + > > > + /* set delay lane */ > > > + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); > > > + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); > > > + > > > + /* enable delay lane */ > > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > > + val &= ~(1 << UPDATE_DC); > > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > > + > > > + val = (1 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > > + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); > > > + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); > > > + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); > > > + > > > + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > > + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); > > > + > > > + val = (1 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > > + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); > > > + > > > + /* enable data strobe mode */ > > > + sdhci_writeb(host, 3 << SLV_INPSEL, PHY_DLLDL_CNFG_R); > > > + sdhci_writeb(host, (1 << DLL_EN), PHY_DLL_CTRL_R); > > > +} > > > + > > > +static void th1520_phy_3_3v_init(struct sdhci_host *host) > > > +{ > > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > > + u32 val; > > > + > > > + if (priv->pull_up_en == 0) { > > > + sdhci_phy_3_3v_init_no_pull(host); > > > + return; > > > + } > > > + > > > + /* set driving force */ > > > + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); > > > + > > > + /* disable delay lane */ > > > + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); > > > + > > > + /* set delay lane */ > > > + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); > > > + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); > > > + > > > + /* enable delay lane */ > > > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > > > + val &= ~(1 << UPDATE_DC); > > > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > > > + > > > + val = (2 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > > + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); > > > + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); > > > + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); > > > + > > > + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > > + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); > > > + > > > + val = (2 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); > > > + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); > > > +} > > > + > > > + > > > +static void th1520_sdhci_set_phy(struct sdhci_host *host) > > > +{ > > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > > + u8 emmc_ctl; > > > + > > > + /* Before power on, set PHY configs */ > > > + emmc_ctl = sdhci_readw(host, EMMC_CTRL_R); > > > + if (priv->non_removable) { > > > + th1520_phy_1_8v_init(host); > > > + emmc_ctl |= (1 << DWCMSHC_CARD_IS_EMMC); > > > + } else { > > > + th1520_phy_3_3v_init(host); > > > + emmc_ctl &=~(1 << DWCMSHC_CARD_IS_EMMC); > > > + } > > > + sdhci_writeb(host, emmc_ctl, EMMC_CTRL_R); > > > + sdhci_writeb(host, 0x25, PHY_DLL_CNFG1_R); > > > > magic 0x25 needs a meaningful MACRO definition. > > Okay, I'll investigate the meaning of that value and define it. > > > > > > +} > > > + > > > static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, > > > unsigned int timing) > > > { > > > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > > struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > > + > > > > we don't need this extra blank line > > Okay > > > > > > u16 ctrl, ctrl_2; > > > > > > ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > > > @@ -188,7 +409,22 @@ static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, > > > ctrl_2 |= DWCMSHC_CTRL_HS400; > > > } > > > > > > + if (priv->io_fixed_1v8) > > > + ctrl_2 |= SDHCI_CTRL_VDD_180; > > > + > > > sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > > > + > > > + /* TODO: add check so that this only runs on th1520 */ > > > > this TODO needs to be solved since it affects other platforms such as NV > > and RK > > Yes, I need to fix this. For the next version, I am considering adding > a flag to dwcmshc_priv that would gate the following code block. > > > > > + if (timing == MMC_TIMING_MMC_HS400) { > > > + /* disable auto tuning */ > > > + u32 reg = sdhci_readl(host, AT_CTRL_R); > > > + reg &= ~1; > > > + sdhci_writel(host, reg, AT_CTRL_R); > > > + priv->delay_line = DELAY_LINE_HS400; > > > + th1520_sdhci_set_phy(host); > > > + } else { > > > + sdhci_writeb(host, 0, PHY_DLLDL_CNFG_R); > > > + } > > > } > > > > > > static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc, > > > @@ -337,6 +573,49 @@ static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask) > > > sdhci_reset(host, mask); > > > } > > > > > > +static int th1520_execute_tuning(struct sdhci_host *host, u32 opcode) > > > +{ > > > + u32 val = 0; > > > + > > > + sdhci_writeb(host, 3 << INPSEL_CNFG, PHY_ATDL_CNFG_R); > > > + > > > + val = sdhci_readl(host, AT_CTRL_R); > > > + val &= ~((1 << CI_SEL) | (1 << RPT_TUNE_ERR) \ > > > + | (1 << SW_TUNE_EN) |(0xf << WIN_EDGE_SEL)); > > > + val |= (1 << AT_EN) | (1 << SWIN_TH_EN) | (1 << TUNE_CLK_STOP_EN)\ > > > + | (1 << PRE_CHANGE_DLY) | (3 << POST_CHANGE_DLY) | (9 << SWIN_TH_VAL); > > > + > > > + sdhci_writel(host, val, AT_CTRL_R); > > > + > > > + val = sdhci_readl(host, AT_CTRL_R); > > > + if(!(val & (1 << AT_EN))) { > > > + pr_warn("%s(): auto tuning is not enabled", __func__); > > > > AFAIK, the controller supports both auto tuning and sw tuning. > > Okay, I'll have to investigate further why it is like this in the vendor > kernel [2]. > > > > > > + return -1; > > > > can we replace -1 with meaningful error number? > > > > Yes, will do for next version. > > > > + } > > > + > > > + val &= ~(1 << AT_EN); > > > + sdhci_writel(host, val, AT_CTRL_R); > > > + > > > + return 0; > > > +} > > > + > > > +static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask) > > > +{ > > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > > + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); > > > + u16 ctrl_2; > > > + > > > + sdhci_reset(host, mask); > > > + > > > + if(priv->io_fixed_1v8){ > > > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > > > + if(! (ctrl_2 & SDHCI_CTRL_VDD_180)){ > > > + ctrl_2 |= SDHCI_CTRL_VDD_180; > > > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > > > + } > > > + } > > > +} > > > + > > > static const struct sdhci_ops sdhci_dwcmshc_ops = { > > > .set_clock = sdhci_set_clock, > > > .set_bus_width = sdhci_set_bus_width, > > > @@ -355,6 +634,17 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { > > > .adma_write_desc = dwcmshc_adma_write_desc, > > > }; > > > > > > +static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = { > > > + .set_clock = sdhci_set_clock, > > > + .set_bus_width = sdhci_set_bus_width, > > > + .set_uhs_signaling = dwcmshc_set_uhs_signaling, > > > + .get_max_clock = dwcmshc_get_max_clock, > > > + .reset = th1520_sdhci_reset, > > > + .adma_write_desc = dwcmshc_adma_write_desc, > > > + .voltage_switch = th1520_phy_1_8v_init, > > > + .platform_execute_tuning = &th1520_execute_tuning, > > > +}; > > > + > > > static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { > > > .ops = &sdhci_dwcmshc_ops, > > > .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, > > > @@ -378,6 +668,15 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = { > > > SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, > > > }; > > > > > > +static const struct sdhci_pltfm_data sdhci_dwcmshc_th1520_pdata = { > > > + .ops = &sdhci_dwcmshc_th1520_ops, > > > + > > > + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | > > > + SDHCI_QUIRK_BROKEN_DMA | > > > + SDHCI_QUIRK_BROKEN_ADMA, > > > + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > > > +}; > > > + > > > static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) > > > { > > > int err; > > > @@ -434,6 +733,10 @@ static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv > > > } > > > > > > static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { > > > + { > > > + .compatible = "thead,th1520-dwcmshc", > > > + .data = &sdhci_dwcmshc_th1520_pdata, > > > + }, > > > { > > > .compatible = "rockchip,rk3588-dwcmshc", > > > .data = &sdhci_dwcmshc_rk35xx_pdata, > > > @@ -541,6 +844,39 @@ static int dwcmshc_probe(struct platform_device *pdev) > > > goto err_clk; > > > } > > > > > > + if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) { > > > + > > > + priv->delay_line = DELAY_LINE_DEFAULT; > > > + > > > + if (device_property_present(&pdev->dev, "non-removable")) > > > + priv->non_removable = 1; > > > + else > > > + priv->non_removable = 0; > > > + > > > + if (device_property_present(&pdev->dev, "thead,pull-up")) > > > + priv->pull_up_en = 1; > > > + else > > > + priv->pull_up_en = 0; > > > + > > > + if (device_property_present(&pdev->dev, "thead,io-fixed-1v8")) > > > + priv->io_fixed_1v8 = true; > > > + else > > > + priv->io_fixed_1v8 = false; > > > + > > > + /* > > > + * start_signal_voltage_switch() will try 3.3V first > > > + * then 1.8V. Use SDHCI_SIGNALING_180 ranther than > > > + * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V > > > + * in sdhci_start_signal_voltage_switch(). > > > + */ > > > + if(priv->io_fixed_1v8){ > > > + host->flags &=~SDHCI_SIGNALING_330; > > > + host->flags |= SDHCI_SIGNALING_180; > > > + } > > > + > > > + sdhci_enable_v4_mode(host); > > > + } > > > + > > > #ifdef CONFIG_ACPI > > > if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) > > > sdhci_enable_v4_mode(host); > > > > > > -- > > > 2.34.1 > > > > > Thank you, > Drew > > [1] https://gist.github.com/pdp7/a8301b895c2dc293f2e0210e77e45e01 > [2] https://git.beagleboard.org/beaglev-ahead/beaglev-ahead-linux/-/blob/beaglev-v5.10.113-1.1.2/drivers/mmc/host/sdhci-of-dwcmshc.c#L238 >
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index e68cd87998c8..d35e204cdb16 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -71,6 +71,63 @@ (((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0)) #define RK35xx_MAX_CLKS 3 +/* T-Head specific registers */ +#define DWC_MSHC_PTR_PHY_R 0x300 +#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) +#define PHY_RSTN 0x0 +#define PAD_SP 0x10 +#define PAD_SN 0x14 + +#define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04) +#define PHY_DATAPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x06) +#define PHY_CLKPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x08) +#define PHY_STBPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0a) +#define PHY_RSTNPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0c) +#define RXSEL 0x0 +#define WEAKPULL_EN 0x3 +#define TXSLEW_CTRL_P 0x5 +#define TXSLEW_CTRL_N 0x9 + +#define PHY_PADTEST_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x0e) +#define PHY_PADTEST_OUT_R (DWC_MSHC_PTR_PHY_R + 0x10) +#define PHY_PADTEST_IN_R (DWC_MSHC_PTR_PHY_R + 0x12) +#define PHY_PRBS_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x18) +#define PHY_PHYLBK_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1a) +#define PHY_COMMDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1c) + +#define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d) +#define UPDATE_DC 0x4 + +#define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e) +#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20) +#define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21) +#define INPSEL_CNFG 2 + +#define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24) +#define DLL_EN 0x0 + +#define PHY_DLL_CNFG1_R (DWC_MSHC_PTR_PHY_R + 0x25) +#define PHY_DLL_CNFG2_R (DWC_MSHC_PTR_PHY_R + 0x26) +#define PHY_DLLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x28) +#define SLV_INPSEL 0x5 + +#define P_VENDOR_SPECIFIC_AREA 0x500 +#define EMMC_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x2c) +#define AT_CTRL_R (P_VENDOR_SPECIFIC_AREA + 0x40) +#define AT_EN 0x0 +#define CI_SEL 0x1 +#define SWIN_TH_EN 0x2 +#define RPT_TUNE_ERR 0x3 +#define SW_TUNE_EN 0x4 +#define WIN_EDGE_SEL 0x8 +#define TUNE_CLK_STOP_EN 0x10 +#define PRE_CHANGE_DLY 0x11 +#define POST_CHANGE_DLY 0x13 +#define SWIN_TH_VAL 0x18 + +#define DELAY_LINE_HS400 24 +#define DELAY_LINE_DEFAULT 50 + #define BOUNDARY_OK(addr, len) \ ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1))) @@ -91,6 +148,10 @@ struct dwcmshc_priv { struct clk *bus_clk; int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */ void *priv; /* pointer to SoC private stuff */ + uint32_t delay_line; + bool non_removable; + bool pull_up_en; + bool io_fixed_1v8; }; /* @@ -156,11 +217,171 @@ static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_request(mmc, mrq); } +static void sdhci_phy_1_8v_init_no_pull(struct sdhci_host *host) +{ + uint32_t val; + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); + + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); + val &= ~(1 << 4); + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); + + + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); + sdhci_writew(host, val | 1, PHY_CMDPAD_CNFG_R); + + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); + sdhci_writew(host, val | 1, PHY_DATAPAD_CNFG_R); + + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); + sdhci_writew(host, val | 1, PHY_RSTNPAD_CNFG_R); + + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); + sdhci_writew(host, val | 1, PHY_STBPAD_CNFG_R); + + val = sdhci_readb(host, PHY_DLL_CTRL_R); + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); +} + +static void sdhci_phy_3_3v_init_no_pull(struct sdhci_host *host) +{ + uint32_t val; + + sdhci_writel(host, 1, DWC_MSHC_PTR_PHY_R); + sdhci_writeb(host, 1 << 4, PHY_SDCLKDL_CNFG_R); + sdhci_writeb(host, 0x40, PHY_SDCLKDL_DC_R); + + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); + val &= ~(1 << 4); + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); + + val = sdhci_readw(host, PHY_CMDPAD_CNFG_R); + sdhci_writew(host, val | 2, PHY_CMDPAD_CNFG_R); + + val = sdhci_readw(host, PHY_DATAPAD_CNFG_R); + sdhci_writew(host, val | 2, PHY_DATAPAD_CNFG_R); + + val = sdhci_readw(host, PHY_RSTNPAD_CNFG_R); + sdhci_writew(host, val | 2, PHY_RSTNPAD_CNFG_R); + + val = sdhci_readw(host, PHY_STBPAD_CNFG_R); + sdhci_writew(host, val | 2, PHY_STBPAD_CNFG_R); + + val = sdhci_readb(host, PHY_DLL_CTRL_R); + sdhci_writeb(host, val | 1, PHY_DLL_CTRL_R); +} + +static void th1520_phy_1_8v_init(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 val; + + if (!priv) + return; + + if (priv->pull_up_en == 0) { + sdhci_phy_1_8v_init_no_pull(host); + return; + } + + /* set driving force */ + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); + + /* disable delay lane */ + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); + + /* set delay lane */ + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); + + /* enable delay lane */ + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); + val &= ~(1 << UPDATE_DC); + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); + + val = (1 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); + + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); + + val = (1 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); + + /* enable data strobe mode */ + sdhci_writeb(host, 3 << SLV_INPSEL, PHY_DLLDL_CNFG_R); + sdhci_writeb(host, (1 << DLL_EN), PHY_DLL_CTRL_R); +} + +static void th1520_phy_3_3v_init(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 val; + + if (priv->pull_up_en == 0) { + sdhci_phy_3_3v_init_no_pull(host); + return; + } + + /* set driving force */ + sdhci_writel(host, (1 << PHY_RSTN) | (0xc << PAD_SP) | (0xc << PAD_SN), PHY_CNFG_R); + + /* disable delay lane */ + sdhci_writeb(host, 1 << UPDATE_DC, PHY_SDCLKDL_CNFG_R); + + /* set delay lane */ + sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); + sdhci_writeb(host, 0xa, PHY_DLL_CNFG2_R); + + /* enable delay lane */ + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); + val &= ~(1 << UPDATE_DC); + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); + + val = (2 << RXSEL) | (1 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); + + val = (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); + + val = (2 << RXSEL) | (2 << WEAKPULL_EN) | (3 << TXSLEW_CTRL_P) | (3 << TXSLEW_CTRL_N); + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); +} + + +static void th1520_sdhci_set_phy(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + u8 emmc_ctl; + + /* Before power on, set PHY configs */ + emmc_ctl = sdhci_readw(host, EMMC_CTRL_R); + if (priv->non_removable) { + th1520_phy_1_8v_init(host); + emmc_ctl |= (1 << DWCMSHC_CARD_IS_EMMC); + } else { + th1520_phy_3_3v_init(host); + emmc_ctl &=~(1 << DWCMSHC_CARD_IS_EMMC); + } + sdhci_writeb(host, emmc_ctl, EMMC_CTRL_R); + sdhci_writeb(host, 0x25, PHY_DLL_CNFG1_R); +} + static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + u16 ctrl, ctrl_2; ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); @@ -188,7 +409,22 @@ static void dwcmshc_set_uhs_signaling(struct sdhci_host *host, ctrl_2 |= DWCMSHC_CTRL_HS400; } + if (priv->io_fixed_1v8) + ctrl_2 |= SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + + /* TODO: add check so that this only runs on th1520 */ + if (timing == MMC_TIMING_MMC_HS400) { + /* disable auto tuning */ + u32 reg = sdhci_readl(host, AT_CTRL_R); + reg &= ~1; + sdhci_writel(host, reg, AT_CTRL_R); + priv->delay_line = DELAY_LINE_HS400; + th1520_sdhci_set_phy(host); + } else { + sdhci_writeb(host, 0, PHY_DLLDL_CNFG_R); + } } static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc, @@ -337,6 +573,49 @@ static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask) sdhci_reset(host, mask); } +static int th1520_execute_tuning(struct sdhci_host *host, u32 opcode) +{ + u32 val = 0; + + sdhci_writeb(host, 3 << INPSEL_CNFG, PHY_ATDL_CNFG_R); + + val = sdhci_readl(host, AT_CTRL_R); + val &= ~((1 << CI_SEL) | (1 << RPT_TUNE_ERR) \ + | (1 << SW_TUNE_EN) |(0xf << WIN_EDGE_SEL)); + val |= (1 << AT_EN) | (1 << SWIN_TH_EN) | (1 << TUNE_CLK_STOP_EN)\ + | (1 << PRE_CHANGE_DLY) | (3 << POST_CHANGE_DLY) | (9 << SWIN_TH_VAL); + + sdhci_writel(host, val, AT_CTRL_R); + + val = sdhci_readl(host, AT_CTRL_R); + if(!(val & (1 << AT_EN))) { + pr_warn("%s(): auto tuning is not enabled", __func__); + return -1; + } + + val &= ~(1 << AT_EN); + sdhci_writel(host, val, AT_CTRL_R); + + return 0; +} + +static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + u16 ctrl_2; + + sdhci_reset(host, mask); + + if(priv->io_fixed_1v8){ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if(! (ctrl_2 & SDHCI_CTRL_VDD_180)){ + ctrl_2 |= SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + } + } +} + static const struct sdhci_ops sdhci_dwcmshc_ops = { .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, @@ -355,6 +634,17 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = { .adma_write_desc = dwcmshc_adma_write_desc, }; +static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .set_uhs_signaling = dwcmshc_set_uhs_signaling, + .get_max_clock = dwcmshc_get_max_clock, + .reset = th1520_sdhci_reset, + .adma_write_desc = dwcmshc_adma_write_desc, + .voltage_switch = th1520_phy_1_8v_init, + .platform_execute_tuning = &th1520_execute_tuning, +}; + static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { .ops = &sdhci_dwcmshc_ops, .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, @@ -378,6 +668,15 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = { SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, }; +static const struct sdhci_pltfm_data sdhci_dwcmshc_th1520_pdata = { + .ops = &sdhci_dwcmshc_th1520_ops, + + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_BROKEN_DMA | + SDHCI_QUIRK_BROKEN_ADMA, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, +}; + static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) { int err; @@ -434,6 +733,10 @@ static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv } static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { + { + .compatible = "thead,th1520-dwcmshc", + .data = &sdhci_dwcmshc_th1520_pdata, + }, { .compatible = "rockchip,rk3588-dwcmshc", .data = &sdhci_dwcmshc_rk35xx_pdata, @@ -541,6 +844,39 @@ static int dwcmshc_probe(struct platform_device *pdev) goto err_clk; } + if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) { + + priv->delay_line = DELAY_LINE_DEFAULT; + + if (device_property_present(&pdev->dev, "non-removable")) + priv->non_removable = 1; + else + priv->non_removable = 0; + + if (device_property_present(&pdev->dev, "thead,pull-up")) + priv->pull_up_en = 1; + else + priv->pull_up_en = 0; + + if (device_property_present(&pdev->dev, "thead,io-fixed-1v8")) + priv->io_fixed_1v8 = true; + else + priv->io_fixed_1v8 = false; + + /* + * start_signal_voltage_switch() will try 3.3V first + * then 1.8V. Use SDHCI_SIGNALING_180 ranther than + * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V + * in sdhci_start_signal_voltage_switch(). + */ + if(priv->io_fixed_1v8){ + host->flags &=~SDHCI_SIGNALING_330; + host->flags |= SDHCI_SIGNALING_180; + } + + sdhci_enable_v4_mode(host); + } + #ifdef CONFIG_ACPI if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) sdhci_enable_v4_mode(host);
Add basic support for the T-Head TH1520 SoC mmc controller with the new compatible "thead,th1520-dwcmshc". However, quirks are currently set to disable DMA and use PIO. The proper settings for DMA support still need to be determined. Another issue is th1520-specific code for MMC_TIMING_MMC_HS400 in dwcmshc_set_uhs_signaling() will run on all platforms which is not correct. One solution could be to add a th1520 flag to dwcmshc_priv but that is hacky. Another solution could be to set the set_uhs_signaling op in sdhci_dwcmshc_th1520_ops to a th1520-specific function. However, that new function would have to duplicate all the code in the current dwcmshc_set_uhs_signaling(). Signed-off-by: Drew Fustini <dfustini@baylibre.com> --- drivers/mmc/host/sdhci-of-dwcmshc.c | 336 ++++++++++++++++++++++++++++++++++++ 1 file changed, 336 insertions(+)