[1/7] riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma

Commit Message

Samuel Holland Sept. 9, 2023, 8:16 p.m. UTC

commit 3f1e782998cd ("riscv: add ASID-based tlbflushing methods") added
calls to the sfence.vma instruction with rs2 != x0. These single-ASID
instruction variants are also affected by SiFive errata CIP-1200.

Until now, the errata workaround was not needed for the single-ASID
sfence.vma variants, because they were only used when the ASID allocator
was enabled, and the affected SiFive platforms do not support multiple
ASIDs. However, we are going to start using those sfence.vma variants
regardless of ASID support, so now we need alternatives covering them.

Signed-off-by: Samuel Holland <[e-mail]>
---

 arch/riscv/include/asm/errata_list.h | 12 +++++++++++-
 arch/riscv/include/asm/tlbflush.h    | 13 ++++++++++++-
 arch/riscv/mm/tlbflush.c             | 17 -----------------
 3 files changed, 23 insertions(+), 19 deletions(-)

Patch

diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index fb1a810f3d8c..6e416297847c 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -39,11 +39,21 @@  ALTERNATIVE(__stringify(RISCV_PTR do_page_fault),			\
 	    CONFIG_ERRATA_SIFIVE_CIP_453)
 #else /* !__ASSEMBLY__ */
 
-#define ALT_FLUSH_TLB_PAGE(x)						\
+#define ALT_SFENCE_VMA_ASID(asid)					\
+asm(ALTERNATIVE("sfence.vma x0, %0", "sfence.vma", SIFIVE_VENDOR_ID,	\
+		ERRATA_SIFIVE_CIP_1200, CONFIG_ERRATA_SIFIVE_CIP_1200)	\
+		: : "r" (asid) : "memory")
+
+#define ALT_SFENCE_VMA_ADDR(addr)					\
 asm(ALTERNATIVE("sfence.vma %0", "sfence.vma", SIFIVE_VENDOR_ID,	\
 		ERRATA_SIFIVE_CIP_1200, CONFIG_ERRATA_SIFIVE_CIP_1200)	\
 		: : "r" (addr) : "memory")
 
+#define ALT_SFENCE_VMA_ADDR_ASID(addr, asid)				\
+asm(ALTERNATIVE("sfence.vma %0, %1", "sfence.vma", SIFIVE_VENDOR_ID,	\
+		ERRATA_SIFIVE_CIP_1200, CONFIG_ERRATA_SIFIVE_CIP_1200)	\
+		: : "r" (addr), "r" (asid) : "memory")
+
 /*
  * _val is marked as "will be overwritten", so need to set it to 0
  * in the default case.
diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
index a09196f8de68..e2960c9c16e8 100644
--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -19,10 +19,21 @@  static inline void local_flush_tlb_all(void)
 	__asm__ __volatile__ ("sfence.vma" : : : "memory");
 }
 
+static inline void local_flush_tlb_all_asid(unsigned long asid)
+{
+	ALT_SFENCE_VMA_ASID(asid);
+}
+
 /* Flush one page from local TLB */
 static inline void local_flush_tlb_page(unsigned long addr)
 {
-	ALT_FLUSH_TLB_PAGE(__asm__ __volatile__ ("sfence.vma %0" : : "r" (addr) : "memory"));
+	ALT_SFENCE_VMA_ADDR(addr);
+}
+
+static inline void local_flush_tlb_page_asid(unsigned long addr,
+					     unsigned long asid)
+{
+	ALT_SFENCE_VMA_ADDR_ASID(addr, asid);
 }
 #else /* CONFIG_MMU */
 #define local_flush_tlb_all()			do { } while (0)
diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
index 77be59aadc73..115d617d16c9 100644
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -6,23 +6,6 @@ 
 #include <asm/sbi.h>
 #include <asm/mmu_context.h>
 
-static inline void local_flush_tlb_all_asid(unsigned long asid)
-{
-	__asm__ __volatile__ ("sfence.vma x0, %0"
-			:
-			: "r" (asid)
-			: "memory");
-}
-
-static inline void local_flush_tlb_page_asid(unsigned long addr,
-		unsigned long asid)
-{
-	__asm__ __volatile__ ("sfence.vma %0, %1"
-			:
-			: "r" (addr), "r" (asid)
-			: "memory");
-}
-
 static inline void local_flush_tlb_range(unsigned long start,
 		unsigned long size, unsigned long stride)
 {