Message ID | 20230929000704.53217-6-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
---|---|
State | Accepted |
Commit | db38228c03d649465d6a1d7beb3a6604979763aa |
Delegated to: | Palmer Dabbelt |
Headers | show |
Series | Enable peripherals on RZ/Five SMARC EVK | expand |
On Fri, Sep 29, 2023 at 01:07:04AM +0100, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Enable the configs required by the below IP blocks which are > present on RZ/Five SoC: > * ADC > * CANFD > * DMAC > * eMMC/SDHI > * OSTM > * RAVB (+ Micrel PHY) > * RIIC > * RSPI > * SSI (Sound+WM8978 codec) > * Thermal > * USB (PHY/RESET/OTG) > > Along with the above some core configs are enabled too, > -> CPU frequency scaling as RZ/Five does support this. > -> MTD is enabled as RSPI can be connected to flash chips > -> Enabled I2C chardev so that it enables userspace to read/write > i2c devices (similar to arm64) > -> Thermal configs as RZ/Five SoC does have thermal unit > -> GPIO regulator as we might have IP blocks for which voltage > levels are controlled by GPIOs You might or you do? Either way, this stuff seems fine to me /shrug Acked-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor. > -> OTG configs as RZ/Five USB can support host/function > -> Gadget configs so that we can test USB function (as done in arm64 > all the gadget configs are enabled) > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > arch/riscv/configs/defconfig | 52 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig > index ab86ec3b9eab..1e81c865a271 100644 > --- a/arch/riscv/configs/defconfig > +++ b/arch/riscv/configs/defconfig > @@ -36,6 +36,13 @@ CONFIG_SMP=y > CONFIG_HOTPLUG_CPU=y > CONFIG_PM=y > CONFIG_CPU_IDLE=y > +CONFIG_CPU_FREQ=y > +CONFIG_CPU_FREQ_STAT=y > +CONFIG_CPU_FREQ_GOV_POWERSAVE=m > +CONFIG_CPU_FREQ_GOV_USERSPACE=y > +CONFIG_CPU_FREQ_GOV_ONDEMAND=y > +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m > +CONFIG_CPUFREQ_DT=y > CONFIG_VIRTUALIZATION=y > CONFIG_KVM=m > CONFIG_ACPI=y > @@ -94,6 +101,7 @@ CONFIG_NETLINK_DIAG=y > CONFIG_CGROUP_NET_PRIO=y > CONFIG_NET_9P=y > CONFIG_NET_9P_VIRTIO=y > +CONFIG_CAN=m > CONFIG_PCI=y > CONFIG_PCIEPORTBUS=y > CONFIG_PCI_HOST_GENERIC=y > @@ -101,6 +109,11 @@ CONFIG_PCIE_XILINX=y > CONFIG_PCIE_FU740=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > +CONFIG_MTD=y > +CONFIG_MTD_BLOCK=y > +CONFIG_MTD_CFI=y > +CONFIG_MTD_CFI_ADV_OPTIONS=y > +CONFIG_MTD_SPI_NOR=y > CONFIG_BLK_DEV_LOOP=y > CONFIG_VIRTIO_BLK=y > CONFIG_BLK_DEV_NVME=m > @@ -123,8 +136,11 @@ CONFIG_VIRTIO_NET=y > CONFIG_MACB=y > CONFIG_E1000E=y > CONFIG_R8169=y > +CONFIG_RAVB=y > CONFIG_STMMAC_ETH=m > +CONFIG_MICREL_PHY=y > CONFIG_MICROSEMI_PHY=y > +CONFIG_CAN_RCAR_CANFD=m > CONFIG_INPUT_MOUSEDEV=y > CONFIG_KEYBOARD_SUN4I_LRADC=m > CONFIG_SERIAL_8250=y > @@ -135,16 +151,24 @@ CONFIG_SERIAL_SH_SCI=y > CONFIG_VIRTIO_CONSOLE=y > CONFIG_HW_RANDOM=y > CONFIG_HW_RANDOM_VIRTIO=y > +CONFIG_I2C_CHARDEV=m > CONFIG_I2C_MV64XXX=m > +CONFIG_I2C_RIIC=y > CONFIG_SPI=y > +CONFIG_SPI_RSPI=m > CONFIG_SPI_SIFIVE=y > CONFIG_SPI_SUN6I=y > # CONFIG_PTP_1588_CLOCK is not set > CONFIG_GPIO_SIFIVE=y > +CONFIG_CPU_THERMAL=y > +CONFIG_DEVFREQ_THERMAL=y > +CONFIG_RZG2L_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_SUNXI_WATCHDOG=y > +CONFIG_RENESAS_RZG2LWDT=y > CONFIG_REGULATOR=y > CONFIG_REGULATOR_FIXED_VOLTAGE=y > +CONFIG_REGULATOR_GPIO=y > CONFIG_DRM=m > CONFIG_DRM_RADEON=m > CONFIG_DRM_NOUVEAU=m > @@ -152,39 +176,67 @@ CONFIG_DRM_SUN4I=m > CONFIG_DRM_VIRTIO_GPU=m > CONFIG_FB=y > CONFIG_FRAMEBUFFER_CONSOLE=y > +CONFIG_SOUND=y > +CONFIG_SND=y > +CONFIG_SND_SOC=y > +CONFIG_SND_SOC_RZ=m > +CONFIG_SND_SOC_WM8978=m > +CONFIG_SND_SIMPLE_CARD=m > CONFIG_USB=y > +CONFIG_USB_OTG=y > CONFIG_USB_XHCI_HCD=y > CONFIG_USB_XHCI_PLATFORM=y > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_HCD_PLATFORM=y > CONFIG_USB_OHCI_HCD=y > CONFIG_USB_OHCI_HCD_PLATFORM=y > +CONFIG_USB_RENESAS_USBHS=m > CONFIG_USB_STORAGE=y > CONFIG_USB_UAS=y > CONFIG_USB_MUSB_HDRC=m > CONFIG_USB_MUSB_SUNXI=m > CONFIG_NOP_USB_XCEIV=m > +CONFIG_USB_GADGET=y > +CONFIG_USB_RENESAS_USBHS_UDC=m > +CONFIG_USB_CONFIGFS=m > +CONFIG_USB_CONFIGFS_SERIAL=y > +CONFIG_USB_CONFIGFS_ACM=y > +CONFIG_USB_CONFIGFS_OBEX=y > +CONFIG_USB_CONFIGFS_NCM=y > +CONFIG_USB_CONFIGFS_ECM=y > +CONFIG_USB_CONFIGFS_ECM_SUBSET=y > +CONFIG_USB_CONFIGFS_RNDIS=y > +CONFIG_USB_CONFIGFS_EEM=y > +CONFIG_USB_CONFIGFS_MASS_STORAGE=y > +CONFIG_USB_CONFIGFS_F_FS=y > CONFIG_MMC=y > CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_PLTFM=y > CONFIG_MMC_SDHCI_CADENCE=y > CONFIG_MMC_SPI=y > +CONFIG_MMC_SDHI=y > CONFIG_MMC_SUNXI=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_DRV_SUN6I=y > CONFIG_DMADEVICES=y > CONFIG_DMA_SUN6I=m > +CONFIG_RZ_DMAC=y > CONFIG_VIRTIO_PCI=y > CONFIG_VIRTIO_BALLOON=y > CONFIG_VIRTIO_INPUT=y > CONFIG_VIRTIO_MMIO=y > +CONFIG_RENESAS_OSTM=y > CONFIG_SUN8I_DE2_CCU=m > CONFIG_SUN50I_IOMMU=y > CONFIG_RPMSG_CHAR=y > CONFIG_RPMSG_CTRL=y > CONFIG_RPMSG_VIRTIO=y > CONFIG_ARCH_R9A07G043=y > +CONFIG_IIO=y > +CONFIG_RZG2L_ADC=m > +CONFIG_RESET_RZG2L_USBPHY_CTRL=y > CONFIG_PHY_SUN4I_USB=m > +CONFIG_PHY_RCAR_GEN3_USB2=y > CONFIG_LIBNVDIMM=y > CONFIG_NVMEM_SUNXI_SID=y > CONFIG_EXT4_FS=y > -- > 2.34.1 >
Hi Conor, Thank you for review. On Fri, Sep 29, 2023 at 3:14 PM Conor Dooley <conor@kernel.org> wrote: > > On Fri, Sep 29, 2023 at 01:07:04AM +0100, Prabhakar wrote: > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > Enable the configs required by the below IP blocks which are > > present on RZ/Five SoC: > > * ADC > > * CANFD > > * DMAC > > * eMMC/SDHI > > * OSTM > > * RAVB (+ Micrel PHY) > > * RIIC > > * RSPI > > * SSI (Sound+WM8978 codec) > > * Thermal > > * USB (PHY/RESET/OTG) > > > > Along with the above some core configs are enabled too, > > -> CPU frequency scaling as RZ/Five does support this. > > -> MTD is enabled as RSPI can be connected to flash chips > > -> Enabled I2C chardev so that it enables userspace to read/write > > i2c devices (similar to arm64) > > -> Thermal configs as RZ/Five SoC does have thermal unit > > -> GPIO regulator as we might have IP blocks for which voltage > > levels are controlled by GPIOs > > You might or you do? > Yes we do use the gpio regulator for SDHI. Cheers, Prabhakar
Hi Prabhakar, On Fri, Sep 29, 2023 at 2:07 AM Prabhakar <prabhakar.csengg@gmail.com> wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Enable the configs required by the below IP blocks which are > present on RZ/Five SoC: > * ADC > * CANFD > * DMAC > * eMMC/SDHI > * OSTM > * RAVB (+ Micrel PHY) > * RIIC > * RSPI > * SSI (Sound+WM8978 codec) > * Thermal > * USB (PHY/RESET/OTG) > > Along with the above some core configs are enabled too, > -> CPU frequency scaling as RZ/Five does support this. > -> MTD is enabled as RSPI can be connected to flash chips > -> Enabled I2C chardev so that it enables userspace to read/write > i2c devices (similar to arm64) > -> Thermal configs as RZ/Five SoC does have thermal unit > -> GPIO regulator as we might have IP blocks for which voltage > levels are controlled by GPIOs > -> OTG configs as RZ/Five USB can support host/function > -> Gadget configs so that we can test USB function (as done in arm64 > all the gadget configs are enabled) > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> As I expect this to go in through the RISC-V tree, I will let the RISC-V people handle any discussion about more options that should be made modular instead of builtin. Gr{oetje,eeting}s, Geert
On Tue, 03 Oct 2023 05:34:13 PDT (-0700), geert@linux-m68k.org wrote: > Hi Prabhakar, > > On Fri, Sep 29, 2023 at 2:07 AM Prabhakar <prabhakar.csengg@gmail.com> wrote: >> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> >> >> Enable the configs required by the below IP blocks which are >> present on RZ/Five SoC: >> * ADC >> * CANFD >> * DMAC >> * eMMC/SDHI >> * OSTM >> * RAVB (+ Micrel PHY) >> * RIIC >> * RSPI >> * SSI (Sound+WM8978 codec) >> * Thermal >> * USB (PHY/RESET/OTG) >> >> Along with the above some core configs are enabled too, >> -> CPU frequency scaling as RZ/Five does support this. >> -> MTD is enabled as RSPI can be connected to flash chips >> -> Enabled I2C chardev so that it enables userspace to read/write >> i2c devices (similar to arm64) >> -> Thermal configs as RZ/Five SoC does have thermal unit >> -> GPIO regulator as we might have IP blocks for which voltage >> levels are controlled by GPIOs >> -> OTG configs as RZ/Five USB can support host/function >> -> Gadget configs so that we can test USB function (as done in arm64 >> all the gadget configs are enabled) >> >> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > As I expect this to go in through the RISC-V tree, I will let the > RISC-V people handle any discussion about more options that should be > made modular instead of builtin. I'm pretty much agnostic on that front, so I'm cool just picking up this. I've got just patch 5 in my queue for testing, there's a few other things in front of it but it should show up on for-next soon. > > Gr{oetje,eeting}s, > > Geert
Hi Palmer, On 2023-10-27 5:11 PM, Palmer Dabbelt wrote: > On Tue, 03 Oct 2023 05:34:13 PDT (-0700), geert@linux-m68k.org wrote: >> Hi Prabhakar, >> >> On Fri, Sep 29, 2023 at 2:07 AM Prabhakar <prabhakar.csengg@gmail.com> wrote: >>> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> >>> >>> Enable the configs required by the below IP blocks which are >>> present on RZ/Five SoC: >>> * ADC >>> * CANFD >>> * DMAC >>> * eMMC/SDHI >>> * OSTM >>> * RAVB (+ Micrel PHY) >>> * RIIC >>> * RSPI >>> * SSI (Sound+WM8978 codec) >>> * Thermal >>> * USB (PHY/RESET/OTG) >>> >>> Along with the above some core configs are enabled too, >>> -> CPU frequency scaling as RZ/Five does support this. >>> -> MTD is enabled as RSPI can be connected to flash chips >>> -> Enabled I2C chardev so that it enables userspace to read/write >>> i2c devices (similar to arm64) >>> -> Thermal configs as RZ/Five SoC does have thermal unit >>> -> GPIO regulator as we might have IP blocks for which voltage >>> levels are controlled by GPIOs >>> -> OTG configs as RZ/Five USB can support host/function >>> -> Gadget configs so that we can test USB function (as done in arm64 >>> all the gadget configs are enabled) >>> >>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> >> >> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> >> >> As I expect this to go in through the RISC-V tree, I will let the >> RISC-V people handle any discussion about more options that should be >> made modular instead of builtin. > > I'm pretty much agnostic on that front, so I'm cool just picking up this. I've > got just patch 5 in my queue for testing, there's a few other things in front of > it but it should show up on for-next soon. Does it make sense to merge this, considering RZ/Five support depends on NONPORTABLE, and therefore cannot be enabled in defconfig anyway? Regards, Samuel
Hi Samuel, On Sat, Oct 28, 2023 at 11:27 PM Samuel Holland <samuel.holland@sifive.com> wrote: > On 2023-10-27 5:11 PM, Palmer Dabbelt wrote: > > On Tue, 03 Oct 2023 05:34:13 PDT (-0700), geert@linux-m68k.org wrote: > >> On Fri, Sep 29, 2023 at 2:07 AM Prabhakar <prabhakar.csengg@gmail.com> wrote: > >>> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > >>> > >>> Enable the configs required by the below IP blocks which are > >>> present on RZ/Five SoC: > >>> * ADC > >>> * CANFD > >>> * DMAC > >>> * eMMC/SDHI > >>> * OSTM > >>> * RAVB (+ Micrel PHY) > >>> * RIIC > >>> * RSPI > >>> * SSI (Sound+WM8978 codec) > >>> * Thermal > >>> * USB (PHY/RESET/OTG) > >>> > >>> Along with the above some core configs are enabled too, > >>> -> CPU frequency scaling as RZ/Five does support this. > >>> -> MTD is enabled as RSPI can be connected to flash chips > >>> -> Enabled I2C chardev so that it enables userspace to read/write > >>> i2c devices (similar to arm64) > >>> -> Thermal configs as RZ/Five SoC does have thermal unit > >>> -> GPIO regulator as we might have IP blocks for which voltage > >>> levels are controlled by GPIOs > >>> -> OTG configs as RZ/Five USB can support host/function > >>> -> Gadget configs so that we can test USB function (as done in arm64 > >>> all the gadget configs are enabled) > >>> > >>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > >> > >> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > >> > >> As I expect this to go in through the RISC-V tree, I will let the > >> RISC-V people handle any discussion about more options that should be > >> made modular instead of builtin. > > > > I'm pretty much agnostic on that front, so I'm cool just picking up this. I've > > got just patch 5 in my queue for testing, there's a few other things in front of > > it but it should show up on for-next soon. > > Does it make sense to merge this, considering RZ/Five support depends on > NONPORTABLE, and therefore cannot be enabled in defconfig anyway? Indeed, that's a good point. Note that this patch (and its review) predates the NONPORTABLE dependency. Palmer: are you open to adding a new rzfive_defconfig[*] instead? I see there are already other configs, so riscv seems to follow the arm rather than the arm64 (there can be only one ring^Wdefconfig) model. Thanks! [*] I do hope to reserve (possibly non-upstream) renesas_defconfig for the army of future Renesas RISC-V SoCs that do not need a dependency on NONPORTABLE ;-) Gr{oetje,eeting}s, Geert
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig index ab86ec3b9eab..1e81c865a271 100644 --- a/arch/riscv/configs/defconfig +++ b/arch/riscv/configs/defconfig @@ -36,6 +36,13 @@ CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y CONFIG_PM=y CONFIG_CPU_IDLE=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPUFREQ_DT=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_ACPI=y @@ -94,6 +101,7 @@ CONFIG_NETLINK_DIAG=y CONFIG_CGROUP_NET_PRIO=y CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y +CONFIG_CAN=m CONFIG_PCI=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_HOST_GENERIC=y @@ -101,6 +109,11 @@ CONFIG_PCIE_XILINX=y CONFIG_PCIE_FU740=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_NVME=m @@ -123,8 +136,11 @@ CONFIG_VIRTIO_NET=y CONFIG_MACB=y CONFIG_E1000E=y CONFIG_R8169=y +CONFIG_RAVB=y CONFIG_STMMAC_ETH=m +CONFIG_MICREL_PHY=y CONFIG_MICROSEMI_PHY=y +CONFIG_CAN_RCAR_CANFD=m CONFIG_INPUT_MOUSEDEV=y CONFIG_KEYBOARD_SUN4I_LRADC=m CONFIG_SERIAL_8250=y @@ -135,16 +151,24 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_VIRTIO_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_I2C_CHARDEV=m CONFIG_I2C_MV64XXX=m +CONFIG_I2C_RIIC=y CONFIG_SPI=y +CONFIG_SPI_RSPI=m CONFIG_SPI_SIFIVE=y CONFIG_SPI_SUN6I=y # CONFIG_PTP_1588_CLOCK is not set CONFIG_GPIO_SIFIVE=y +CONFIG_CPU_THERMAL=y +CONFIG_DEVFREQ_THERMAL=y +CONFIG_RZG2L_THERMAL=y CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_RENESAS_RZG2LWDT=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y CONFIG_DRM=m CONFIG_DRM_RADEON=m CONFIG_DRM_NOUVEAU=m @@ -152,39 +176,67 @@ CONFIG_DRM_SUN4I=m CONFIG_DRM_VIRTIO_GPU=m CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_RZ=m +CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SIMPLE_CARD=m CONFIG_USB=y +CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_UAS=y CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SUNXI=m CONFIG_NOP_USB_XCEIV=m +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_FS=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SPI=y +CONFIG_MMC_SDHI=y CONFIG_MMC_SUNXI=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SUN6I=y CONFIG_DMADEVICES=y CONFIG_DMA_SUN6I=m +CONFIG_RZ_DMAC=y CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_INPUT=y CONFIG_VIRTIO_MMIO=y +CONFIG_RENESAS_OSTM=y CONFIG_SUN8I_DE2_CCU=m CONFIG_SUN50I_IOMMU=y CONFIG_RPMSG_CHAR=y CONFIG_RPMSG_CTRL=y CONFIG_RPMSG_VIRTIO=y CONFIG_ARCH_R9A07G043=y +CONFIG_IIO=y +CONFIG_RZG2L_ADC=m +CONFIG_RESET_RZG2L_USBPHY_CTRL=y CONFIG_PHY_SUN4I_USB=m +CONFIG_PHY_RCAR_GEN3_USB2=y CONFIG_LIBNVDIMM=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_EXT4_FS=y