| Message ID | 20231009124210.1064021-4-masahiroy@kernel.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | [1/5] csky: remove unused cmd_vdso_install | expand |
Masahiro Yamada <masahiroy@kernel.org> writes: > Currently, there is no standard implementation for vdso_install, > leading to various issues: > > 1. Code duplication > > Many architectures duplicate similar code just for copying files > to the install destination. > > Some architectures (arm, sparc, x86) create build-id symlinks, > introducing more code duplication. > > 2. Accidental updates of in-tree build artifacts > > The vdso_install rule depends on the vdso files to install. > It may update in-tree build artifacts. This can be problematic, > as explained in commit 19514fc665ff ("arm, kbuild: make > "make install" not depend on vmlinux"). > > 3. Broken code in some architectures > > Makefile code is often copied from one architecture to another > without proper adaptation or testing. > > The previous commits removed broken code from csky, UML, and parisc. > > Another issue is that 'make vdso_install' for ARCH=s390 installs > vdso64, but not vdso32. > > To address these problems, this commit introduces the generic vdso_install. > > Architectures that support vdso_install need to define vdso-install-y > in arch/*/Makefile. > > vdso-install-y lists the files to install. For example, arch/x86/Makefile > looks like this: > > vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg > vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg > vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg > vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg > > These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, > if exists, stripped away. > > vdso-install-y can optionally take the second field after the colon > separator. This is needed because some architectures install vdso > files as a different base name. > > The following is a snippet from arch/arm64/Makefile. > > vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so > > This will rename vdso.so.dbg to vdso32.so during installation. If such > architectures change their implementation so that the file names match, > this workaround will go away. > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > --- Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
On Mon, Oct 9, 2023 at 8:42 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > Currently, there is no standard implementation for vdso_install, > leading to various issues: > > 1. Code duplication > > Many architectures duplicate similar code just for copying files > to the install destination. > > Some architectures (arm, sparc, x86) create build-id symlinks, > introducing more code duplication. > > 2. Accidental updates of in-tree build artifacts > > The vdso_install rule depends on the vdso files to install. > It may update in-tree build artifacts. This can be problematic, > as explained in commit 19514fc665ff ("arm, kbuild: make > "make install" not depend on vmlinux"). > > 3. Broken code in some architectures > > Makefile code is often copied from one architecture to another > without proper adaptation or testing. > > The previous commits removed broken code from csky, UML, and parisc. > > Another issue is that 'make vdso_install' for ARCH=s390 installs > vdso64, but not vdso32. > > To address these problems, this commit introduces the generic vdso_install. > > Architectures that support vdso_install need to define vdso-install-y > in arch/*/Makefile. > > vdso-install-y lists the files to install. For example, arch/x86/Makefile > looks like this: > > vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg > vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg > vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg > vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg > > These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, > if exists, stripped away. > > vdso-install-y can optionally take the second field after the colon > separator. This is needed because some architectures install vdso > files as a different base name. > > The following is a snippet from arch/arm64/Makefile. > > vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so > > This will rename vdso.so.dbg to vdso32.so during installation. If such > architectures change their implementation so that the file names match, > this workaround will go away. > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > --- > > Makefile | 9 ++++++ > arch/arm/Makefile | 7 +--- > arch/arm/vdso/Makefile | 25 -------------- > arch/arm64/Makefile | 9 ++---- > arch/arm64/kernel/vdso/Makefile | 10 ------ > arch/arm64/kernel/vdso32/Makefile | 10 ------ > arch/loongarch/Makefile | 4 +-- > arch/loongarch/vdso/Makefile | 10 ------ > arch/riscv/Makefile | 9 ++---- > arch/riscv/kernel/compat_vdso/Makefile | 10 ------ > arch/riscv/kernel/vdso/Makefile | 10 ------ > arch/s390/Makefile | 6 ++-- > arch/s390/kernel/vdso32/Makefile | 10 ------ > arch/s390/kernel/vdso64/Makefile | 10 ------ > arch/sparc/Makefile | 5 ++- > arch/sparc/vdso/Makefile | 27 ---------------- > arch/x86/Makefile | 7 ++-- > arch/x86/entry/vdso/Makefile | 27 ---------------- > scripts/Makefile.vdsoinst | 45 ++++++++++++++++++++++++++ > 19 files changed, 71 insertions(+), 179 deletions(-) > create mode 100644 scripts/Makefile.vdsoinst > > diff --git a/Makefile b/Makefile > index 373649c7374e..2170d56630e8 100644 > --- a/Makefile > +++ b/Makefile > @@ -1317,6 +1317,14 @@ scripts_unifdef: scripts_basic > quiet_cmd_install = INSTALL $(INSTALL_PATH) > cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh > > +# --------------------------------------------------------------------------- > +# vDSO install > + > +PHONY += vdso_install > +vdso_install: export INSTALL_FILES = $(vdso-install-y) > +vdso_install: > + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst > + > # --------------------------------------------------------------------------- > # Tools > > @@ -1560,6 +1568,7 @@ help: > @echo '* vmlinux - Build the bare kernel' > @echo '* modules - Build all modules' > @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' > + @echo ' vdso_install - Install unstripped vdso to INSTALL_MOD_PATH (default: /)' > @echo ' dir/ - Build all files in dir and below' > @echo ' dir/file.[ois] - Build specified target only' > @echo ' dir/file.ll - Build the LLVM assembly file' > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index 547e5856eaa0..5ba42f69f8ce 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -304,11 +304,7 @@ $(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@) > $(INSTALL_TARGETS): > $(call cmd,install) > > -PHONY += vdso_install > -vdso_install: > -ifeq ($(CONFIG_VDSO),y) > - $(Q)$(MAKE) $(build)=arch/arm/vdso $@ > -endif > +vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg > > # My testing targets (bypasses dependencies) > bp:; $(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage > @@ -331,7 +327,6 @@ define archhelp > echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or' > echo ' (distribution) /sbin/$(INSTALLKERNEL) or' > echo ' install to $$(INSTALL_PATH) and run lilo' > - echo ' vdso_install - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso' > echo > echo ' multi_v7_lpae_defconfig - multi_v7_defconfig with CONFIG_ARM_LPAE enabled' > endef > diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile > index 515ca33b854c..d761bd2e2f40 100644 > --- a/arch/arm/vdso/Makefile > +++ b/arch/arm/vdso/Makefile > @@ -63,28 +63,3 @@ quiet_cmd_vdsold_and_vdso_check = LD $@ > > quiet_cmd_vdsomunge = MUNGE $@ > cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@ > - > -# > -# Install the unstripped copy of vdso.so.dbg. If our toolchain > -# supports build-id, install .build-id links as well. > -# > -# Cribbed from arch/x86/vdso/Makefile. > -# > -quiet_cmd_vdso_install = INSTALL $< > -define cmd_vdso_install > - cp $< "$(MODLIB)/vdso/vdso.so"; \ > - if readelf -n $< | grep -q 'Build ID'; then \ > - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ > - first=`echo $$buildid | cut -b-2`; \ > - last=`echo $$buildid | cut -b3-`; \ > - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ > - ln -sf "../../vdso.so" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ > - fi > -endef > - > -$(MODLIB)/vdso: FORCE > - @mkdir -p $(MODLIB)/vdso > - > -PHONY += vdso_install > -vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso > - $(call cmd,vdso_install) > diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile > index 2d49aea0ff67..4bd85cc0d32b 100644 > --- a/arch/arm64/Makefile > +++ b/arch/arm64/Makefile > @@ -169,12 +169,6 @@ install: KBUILD_IMAGE := $(boot)/Image > install zinstall: > $(call cmd,install) > > -PHONY += vdso_install > -vdso_install: > - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@ > - $(if $(CONFIG_COMPAT_VDSO), \ > - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@) > - > archprepare: > $(Q)$(MAKE) $(build)=arch/arm64/tools kapi > ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) > @@ -205,6 +199,9 @@ ifdef CONFIG_COMPAT_VDSO > endif > endif > > +vdso-install-y += arch/arm64/kernel/vdso/vdso.so.dbg > +vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so > + > include $(srctree)/scripts/Makefile.defconf > > PHONY += virtconfig > diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile > index fe7a53c6781f..8818287f1095 100644 > --- a/arch/arm64/kernel/vdso/Makefile > +++ b/arch/arm64/kernel/vdso/Makefile > @@ -78,13 +78,3 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE > # Actual build commands > quiet_cmd_vdsold_and_vdso_check = LD $@ > cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check) > - > -# Install commands for the unstripped file > -quiet_cmd_vdso_install = INSTALL $@ > - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ > - > -vdso.so: $(obj)/vdso.so.dbg > - @mkdir -p $(MODLIB)/vdso > - $(call cmd,vdso_install) > - > -vdso_install: vdso.so > diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile > index 2f73e5bca213..1f911a76c5af 100644 > --- a/arch/arm64/kernel/vdso32/Makefile > +++ b/arch/arm64/kernel/vdso32/Makefile > @@ -172,13 +172,3 @@ gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh > quiet_cmd_vdsosym = VDSOSYM $@ > # The AArch64 nm should be able to read an AArch32 binary > cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@ > - > -# Install commands for the unstripped file > -quiet_cmd_vdso_install = INSTALL32 $@ > - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so > - > -vdso.so: $(obj)/vdso.so.dbg > - @mkdir -p $(MODLIB)/vdso > - $(call cmd,vdso_install) > - > -vdso_install: vdso.so > diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile > index fb0fada43197..b86f2ff31659 100644 > --- a/arch/loongarch/Makefile > +++ b/arch/loongarch/Makefile > @@ -136,9 +136,7 @@ vdso_prepare: prepare0 > $(Q)$(MAKE) $(build)=arch/loongarch/vdso include/generated/vdso-offsets.h > endif > > -PHONY += vdso_install > -vdso_install: > - $(Q)$(MAKE) $(build)=arch/loongarch/vdso $@ > +vdso-install-y += arch/loongarch/vdso/vdso.so.dbg > > all: $(notdir $(KBUILD_IMAGE)) > > diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile > index 5c97d1463328..c74c9921304f 100644 > --- a/arch/loongarch/vdso/Makefile > +++ b/arch/loongarch/vdso/Makefile > @@ -83,13 +83,3 @@ $(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE > obj-y += vdso.o > > $(obj)/vdso.o : $(obj)/vdso.so > - > -# install commands for the unstripped file > -quiet_cmd_vdso_install = INSTALL $@ > - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ > - > -vdso.so: $(obj)/vdso.so.dbg > - @mkdir -p $(MODLIB)/vdso > - $(call cmd,vdso_install) > - > -vdso_install: vdso.so > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile > index 1329e060c548..18a47b4d6795 100644 > --- a/arch/riscv/Makefile > +++ b/arch/riscv/Makefile > @@ -131,12 +131,6 @@ endif > libs-y += arch/riscv/lib/ > libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a > > -PHONY += vdso_install > -vdso_install: > - $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ > - $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \ > - $(build)=arch/riscv/kernel/compat_vdso compat_$@) > - > ifeq ($(KBUILD_EXTMOD),) > ifeq ($(CONFIG_MMU),y) > prepare: vdso_prepare > @@ -148,6 +142,9 @@ vdso_prepare: prepare0 > endif > endif > > +vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg > +vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg:../compat_vdso/compat_vdso.so Why do we need ":../compat_vdso/compat_vdso.so" here? > + > ifneq ($(CONFIG_XIP_KERNEL),y) > ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_ARCH_CANAAN),yy) > KBUILD_IMAGE := $(boot)/loader.bin > diff --git a/arch/riscv/kernel/compat_vdso/Makefile b/arch/riscv/kernel/compat_vdso/Makefile > index b86e5e2c3aea..62fa393b2eb2 100644 > --- a/arch/riscv/kernel/compat_vdso/Makefile > +++ b/arch/riscv/kernel/compat_vdso/Makefile > @@ -76,13 +76,3 @@ quiet_cmd_compat_vdsold = VDSOLD $@ > # actual build commands > quiet_cmd_compat_vdsoas = VDSOAS $@ > cmd_compat_vdsoas = $(COMPAT_CC) $(a_flags) $(COMPAT_CC_FLAGS) -c -o $@ $< > - > -# install commands for the unstripped file > -quiet_cmd_compat_vdso_install = INSTALL $@ > - cmd_compat_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/compat_vdso/$@ > - > -compat_vdso.so: $(obj)/compat_vdso.so.dbg > - @mkdir -p $(MODLIB)/compat_vdso > - $(call cmd,compat_vdso_install) > - > -compat_vdso_install: compat_vdso.so > diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile > index 6b1dba11bf6d..e8aa7c380007 100644 > --- a/arch/riscv/kernel/vdso/Makefile > +++ b/arch/riscv/kernel/vdso/Makefile > @@ -73,13 +73,3 @@ quiet_cmd_vdsold = VDSOLD $@ > cmd_vdsold = $(LD) $(ld_flags) -T $(filter-out FORCE,$^) -o $@.tmp && \ > $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \ > rm $@.tmp > - > -# install commands for the unstripped file > -quiet_cmd_vdso_install = INSTALL $@ > - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ > - > -vdso.so: $(obj)/vdso.so.dbg > - @mkdir -p $(MODLIB)/vdso > - $(call cmd,vdso_install) > - > -vdso_install: vdso.so > diff --git a/arch/s390/Makefile b/arch/s390/Makefile > index a53a36ee0731..73873e451686 100644 > --- a/arch/s390/Makefile > +++ b/arch/s390/Makefile > @@ -138,9 +138,6 @@ bzImage: vmlinux > zfcpdump: > $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ > > -vdso_install: > - $(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@ > - > archheaders: > $(Q)$(MAKE) $(build)=$(syscalls) uapi > > @@ -160,6 +157,9 @@ vdso_prepare: prepare0 > $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \ > $(build)=arch/s390/kernel/vdso32 include/generated/vdso32-offsets.h) > > +vdso-install-y += arch/s390/kernel/vdso64/vdso64.so.dbg > +vdso-install-$(CONFIG_COMPAT) += arch/s390/kernel/vdso32/vdso32.so.dbg > + > ifdef CONFIG_EXPOLINE_EXTERN > modules_prepare: expoline_prepare > expoline_prepare: scripts > diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile > index 23e868b79a6c..caec7db6f966 100644 > --- a/arch/s390/kernel/vdso32/Makefile > +++ b/arch/s390/kernel/vdso32/Makefile > @@ -61,16 +61,6 @@ quiet_cmd_vdso32as = VDSO32A $@ > quiet_cmd_vdso32cc = VDSO32C $@ > cmd_vdso32cc = $(CC) $(c_flags) -c -o $@ $< > > -# install commands for the unstripped file > -quiet_cmd_vdso_install = INSTALL $@ > - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ > - > -vdso32.so: $(obj)/vdso32.so.dbg > - @mkdir -p $(MODLIB)/vdso > - $(call cmd,vdso_install) > - > -vdso_install: vdso32.so > - > # Generate VDSO offsets using helper script > gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh > quiet_cmd_vdsosym = VDSOSYM $@ > diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile > index fc1c6ff8178f..e3c9085f8fa7 100644 > --- a/arch/s390/kernel/vdso64/Makefile > +++ b/arch/s390/kernel/vdso64/Makefile > @@ -70,16 +70,6 @@ quiet_cmd_vdso64as = VDSO64A $@ > quiet_cmd_vdso64cc = VDSO64C $@ > cmd_vdso64cc = $(CC) $(c_flags) -c -o $@ $< > > -# install commands for the unstripped file > -quiet_cmd_vdso_install = INSTALL $@ > - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ > - > -vdso64.so: $(obj)/vdso64.so.dbg > - @mkdir -p $(MODLIB)/vdso > - $(call cmd,vdso_install) > - > -vdso_install: vdso64.so > - > # Generate VDSO offsets using helper script > gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh > quiet_cmd_vdsosym = VDSOSYM $@ > diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile > index 7417345c6639..5f6035936131 100644 > --- a/arch/sparc/Makefile > +++ b/arch/sparc/Makefile > @@ -76,9 +76,8 @@ install: > archheaders: > $(Q)$(MAKE) $(build)=arch/sparc/kernel/syscalls all > > -PHONY += vdso_install > -vdso_install: > - $(Q)$(MAKE) $(build)=arch/sparc/vdso $@ > +vdso-install-$(CONFIG_SPARC64) += arch/sparc/vdso/vdso64.so.dbg > +vdso-install-$(CONFIG_COMPAT) += arch/sparc/vdso/vdso32.so.dbg > > # This is the image used for packaging > KBUILD_IMAGE := $(boot)/zImage > diff --git a/arch/sparc/vdso/Makefile b/arch/sparc/vdso/Makefile > index 77d7b9032158..d08c3a0443f3 100644 > --- a/arch/sparc/vdso/Makefile > +++ b/arch/sparc/vdso/Makefile > @@ -116,30 +116,3 @@ quiet_cmd_vdso = VDSO $@ > > VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 -Bsymbolic > GCOV_PROFILE := n > - > -# > -# Install the unstripped copies of vdso*.so. If our toolchain supports > -# build-id, install .build-id links as well. > -# > -quiet_cmd_vdso_install = INSTALL $(@:install_%=%) > -define cmd_vdso_install > - cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \ > - if readelf -n $< |grep -q 'Build ID'; then \ > - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ > - first=`echo $$buildid | cut -b-2`; \ > - last=`echo $$buildid | cut -b3-`; \ > - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ > - ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ > - fi > -endef > - > -vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%) > - > -$(MODLIB)/vdso: FORCE > - @mkdir -p $(MODLIB)/vdso > - > -$(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso FORCE > - $(call cmd,vdso_install) > - > -PHONY += vdso_install $(vdso_img_insttargets) > -vdso_install: $(vdso_img_insttargets) FORCE > diff --git a/arch/x86/Makefile b/arch/x86/Makefile > index 5bfe5caaa444..3ff53a2d4ff0 100644 > --- a/arch/x86/Makefile > +++ b/arch/x86/Makefile > @@ -291,9 +291,10 @@ PHONY += install > install: > $(call cmd,install) > > -PHONY += vdso_install > -vdso_install: > - $(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@ > +vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg > +vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg > +vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg > +vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg > > archprepare: checkbin > checkbin: > diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile > index 6a1821bd7d5e..c197efd82922 100644 > --- a/arch/x86/entry/vdso/Makefile > +++ b/arch/x86/entry/vdso/Makefile > @@ -190,31 +190,4 @@ GCOV_PROFILE := n > quiet_cmd_vdso_and_check = VDSO $@ > cmd_vdso_and_check = $(cmd_vdso); $(cmd_vdso_check) > > -# > -# Install the unstripped copies of vdso*.so. If our toolchain supports > -# build-id, install .build-id links as well. > -# > -quiet_cmd_vdso_install = INSTALL $(@:install_%=%) > -define cmd_vdso_install > - cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \ > - if readelf -n $< |grep -q 'Build ID'; then \ > - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ > - first=`echo $$buildid | cut -b-2`; \ > - last=`echo $$buildid | cut -b3-`; \ > - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ > - ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ > - fi > -endef > - > -vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%) > - > -$(MODLIB)/vdso: FORCE > - @mkdir -p $(MODLIB)/vdso > - > -$(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso > - $(call cmd,vdso_install) > - > -PHONY += vdso_install $(vdso_img_insttargets) > -vdso_install: $(vdso_img_insttargets) > - > clean-files := vdso32.so vdso32.so.dbg vdso64* vdso-image-*.c vdsox32.so* > diff --git a/scripts/Makefile.vdsoinst b/scripts/Makefile.vdsoinst > new file mode 100644 > index 000000000000..1022d9fdd976 > --- /dev/null > +++ b/scripts/Makefile.vdsoinst > @@ -0,0 +1,45 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# ========================================================================== > +# Install unstripped copies of vDSO > +# ========================================================================== > + > +PHONY := __default > +__default: > + @: > + > +include $(srctree)/scripts/Kbuild.include > + > +install-dir := $(MODLIB)/vdso > + > +define gen_install_rules > + > +src := $$(firstword $$(subst :,$(space),$(1))) > +dest := $(install-dir)/$$(or $$(word 2,$$(subst :,$(space),$(1))),$$(patsubst %.dbg,%,$$(notdir $(1)))) > + > +__default: $$(dest) > +$$(dest): $$(src) FORCE > + $$(call cmd,install) > + > +# Some architectures create .build-id symlinks > +ifneq ($(filter arm sparc x86, $(SRCARCH)),) > +link := $(install-dir)/.build-id/$$(shell $(READELF) -n $$(src) | sed -n 's@^.*Build ID: \(..\)\(.*\)@\1/\2@p') > + > +__default: $$(link) > +$$(link): $$(dest) FORCE > + $$(call cmd,symlink) > +endif > + > +endef > + > +$(foreach x, $(sort $(INSTALL_FILES)), $(eval $(call gen_install_rules,$(x)))) > + > +quiet_cmd_install = INSTALL $@ > + cmd_install = mkdir -p $(dir $@); cp $< $@ > + > +quiet_cmd_symlink = SYMLINK $@ > + cmd_symlink = mkdir -p $(dir $@); ln -sf --relative $< $@ > + > +PHONY += FORCE > +FORCE: > + > +.PHONY: $(PHONY) > -- > 2.39.2 >
On Wed, Oct 11, 2023 at 11:24 AM Guo Ren <guoren@kernel.org> wrote: > > On Mon, Oct 9, 2023 at 8:42 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > --- a/arch/riscv/Makefile > > +++ b/arch/riscv/Makefile > > @@ -131,12 +131,6 @@ endif > > libs-y += arch/riscv/lib/ > > libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a > > > > -PHONY += vdso_install > > -vdso_install: > > - $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ > > - $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \ > > - $(build)=arch/riscv/kernel/compat_vdso compat_$@) > > - > > ifeq ($(KBUILD_EXTMOD),) > > ifeq ($(CONFIG_MMU),y) > > prepare: vdso_prepare > > @@ -148,6 +142,9 @@ vdso_prepare: prepare0 > > endif > > endif > > > > +vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg > > +vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg:../compat_vdso/compat_vdso.so > Why do we need ":../compat_vdso/compat_vdso.so" here? All architectures except riscv install vdso files to /lib/modules/$(uname -r)/vdso/. See the following code in arch/riscv/kernel/compat_vdso/Makefile: quiet_cmd_compat_vdso_install = INSTALL $@ cmd_compat_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/compat_vdso/$@ Riscv copies the compat vdso to /lib/modules/$(uname -r)/compat_vdso/. This commit preserves the current installation path as-is. If the riscv maintainers agree, we can change the installation destination to /lib/modules/$(uname -r)/vdso/ for consistency.
On Mon 09 Oct 2023 21:42:09 GMT, Masahiro Yamada wrote: > Currently, there is no standard implementation for vdso_install, > leading to various issues: > > 1. Code duplication > > Many architectures duplicate similar code just for copying files > to the install destination. > > Some architectures (arm, sparc, x86) create build-id symlinks, > introducing more code duplication. > > 2. Accidental updates of in-tree build artifacts > > The vdso_install rule depends on the vdso files to install. > It may update in-tree build artifacts. This can be problematic, > as explained in commit 19514fc665ff ("arm, kbuild: make > "make install" not depend on vmlinux"). > > 3. Broken code in some architectures > > Makefile code is often copied from one architecture to another > without proper adaptation or testing. > > The previous commits removed broken code from csky, UML, and parisc. > > Another issue is that 'make vdso_install' for ARCH=s390 installs > vdso64, but not vdso32. > > To address these problems, this commit introduces the generic vdso_install. > > Architectures that support vdso_install need to define vdso-install-y > in arch/*/Makefile. > > vdso-install-y lists the files to install. For example, arch/x86/Makefile > looks like this: > > vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg > vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg > vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg > vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg > > These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, > if exists, stripped away. > > vdso-install-y can optionally take the second field after the colon > separator. This is needed because some architectures install vdso > files as a different base name. > > The following is a snippet from arch/arm64/Makefile. > > vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so > > This will rename vdso.so.dbg to vdso32.so during installation. If such > architectures change their implementation so that the file names match, > this workaround will go away. > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > --- Thanks for cleaning this up! Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
On Wed, Oct 11, 2023 at 8:53 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > On Wed, Oct 11, 2023 at 11:24 AM Guo Ren <guoren@kernel.org> wrote: > > > > On Mon, Oct 9, 2023 at 8:42 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > > > --- a/arch/riscv/Makefile > > > +++ b/arch/riscv/Makefile > > > @@ -131,12 +131,6 @@ endif > > > libs-y += arch/riscv/lib/ > > > libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a > > > > > > -PHONY += vdso_install > > > -vdso_install: > > > - $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ > > > - $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \ > > > - $(build)=arch/riscv/kernel/compat_vdso compat_$@) > > > - > > > ifeq ($(KBUILD_EXTMOD),) > > > ifeq ($(CONFIG_MMU),y) > > > prepare: vdso_prepare > > > @@ -148,6 +142,9 @@ vdso_prepare: prepare0 > > > endif > > > endif > > > > > > +vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg > > > +vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg:../compat_vdso/compat_vdso.so > > Why do we need ":../compat_vdso/compat_vdso.so" here? > > > > > All architectures except riscv install vdso files > to /lib/modules/$(uname -r)/vdso/. > > > > See the following code in arch/riscv/kernel/compat_vdso/Makefile: > > > quiet_cmd_compat_vdso_install = INSTALL $@ > cmd_compat_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/compat_vdso/$@ > > > > > Riscv copies the compat vdso to > /lib/modules/$(uname -r)/compat_vdso/. > > > > This commit preserves the current installation path as-is. > > If the riscv maintainers agree, we can change the > installation destination to /lib/modules/$(uname -r)/vdso/ > for consistency. Yes, but it should be another patch. Thx for the clarification. Reviewed-by: Guo Ren <guoren@kernel.org> > > > > -- > Best Regards > Masahiro Yamada
On Mon, Oct 09, 2023 at 09:42:09PM +0900, Masahiro Yamada wrote: > arch/arm/Makefile | 7 +--- > arch/arm/vdso/Makefile | 25 -------------- Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Thanks!
diff --git a/Makefile b/Makefile index 373649c7374e..2170d56630e8 100644 --- a/Makefile +++ b/Makefile @@ -1317,6 +1317,14 @@ scripts_unifdef: scripts_basic quiet_cmd_install = INSTALL $(INSTALL_PATH) cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh +# --------------------------------------------------------------------------- +# vDSO install + +PHONY += vdso_install +vdso_install: export INSTALL_FILES = $(vdso-install-y) +vdso_install: + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst + # --------------------------------------------------------------------------- # Tools @@ -1560,6 +1568,7 @@ help: @echo '* vmlinux - Build the bare kernel' @echo '* modules - Build all modules' @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' + @echo ' vdso_install - Install unstripped vdso to INSTALL_MOD_PATH (default: /)' @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[ois] - Build specified target only' @echo ' dir/file.ll - Build the LLVM assembly file' diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 547e5856eaa0..5ba42f69f8ce 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -304,11 +304,7 @@ $(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@) $(INSTALL_TARGETS): $(call cmd,install) -PHONY += vdso_install -vdso_install: -ifeq ($(CONFIG_VDSO),y) - $(Q)$(MAKE) $(build)=arch/arm/vdso $@ -endif +vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg # My testing targets (bypasses dependencies) bp:; $(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage @@ -331,7 +327,6 @@ define archhelp echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or' echo ' (distribution) /sbin/$(INSTALLKERNEL) or' echo ' install to $$(INSTALL_PATH) and run lilo' - echo ' vdso_install - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso' echo echo ' multi_v7_lpae_defconfig - multi_v7_defconfig with CONFIG_ARM_LPAE enabled' endef diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index 515ca33b854c..d761bd2e2f40 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -63,28 +63,3 @@ quiet_cmd_vdsold_and_vdso_check = LD $@ quiet_cmd_vdsomunge = MUNGE $@ cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@ - -# -# Install the unstripped copy of vdso.so.dbg. If our toolchain -# supports build-id, install .build-id links as well. -# -# Cribbed from arch/x86/vdso/Makefile. -# -quiet_cmd_vdso_install = INSTALL $< -define cmd_vdso_install - cp $< "$(MODLIB)/vdso/vdso.so"; \ - if readelf -n $< | grep -q 'Build ID'; then \ - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ - first=`echo $$buildid | cut -b-2`; \ - last=`echo $$buildid | cut -b3-`; \ - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ - ln -sf "../../vdso.so" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ - fi -endef - -$(MODLIB)/vdso: FORCE - @mkdir -p $(MODLIB)/vdso - -PHONY += vdso_install -vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso - $(call cmd,vdso_install) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 2d49aea0ff67..4bd85cc0d32b 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -169,12 +169,6 @@ install: KBUILD_IMAGE := $(boot)/Image install zinstall: $(call cmd,install) -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@ - $(if $(CONFIG_COMPAT_VDSO), \ - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@) - archprepare: $(Q)$(MAKE) $(build)=arch/arm64/tools kapi ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) @@ -205,6 +199,9 @@ ifdef CONFIG_COMPAT_VDSO endif endif +vdso-install-y += arch/arm64/kernel/vdso/vdso.so.dbg +vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so + include $(srctree)/scripts/Makefile.defconf PHONY += virtconfig diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index fe7a53c6781f..8818287f1095 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -78,13 +78,3 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE # Actual build commands quiet_cmd_vdsold_and_vdso_check = LD $@ cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check) - -# Install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso.so: $(obj)/vdso.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso.so diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index 2f73e5bca213..1f911a76c5af 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -172,13 +172,3 @@ gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ # The AArch64 nm should be able to read an AArch32 binary cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@ - -# Install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL32 $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so - -vdso.so: $(obj)/vdso.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso.so diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index fb0fada43197..b86f2ff31659 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -136,9 +136,7 @@ vdso_prepare: prepare0 $(Q)$(MAKE) $(build)=arch/loongarch/vdso include/generated/vdso-offsets.h endif -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/loongarch/vdso $@ +vdso-install-y += arch/loongarch/vdso/vdso.so.dbg all: $(notdir $(KBUILD_IMAGE)) diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile index 5c97d1463328..c74c9921304f 100644 --- a/arch/loongarch/vdso/Makefile +++ b/arch/loongarch/vdso/Makefile @@ -83,13 +83,3 @@ $(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE obj-y += vdso.o $(obj)/vdso.o : $(obj)/vdso.so - -# install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso.so: $(obj)/vdso.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso.so diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 1329e060c548..18a47b4d6795 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -131,12 +131,6 @@ endif libs-y += arch/riscv/lib/ libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ - $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \ - $(build)=arch/riscv/kernel/compat_vdso compat_$@) - ifeq ($(KBUILD_EXTMOD),) ifeq ($(CONFIG_MMU),y) prepare: vdso_prepare @@ -148,6 +142,9 @@ vdso_prepare: prepare0 endif endif +vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg +vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg:../compat_vdso/compat_vdso.so + ifneq ($(CONFIG_XIP_KERNEL),y) ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_ARCH_CANAAN),yy) KBUILD_IMAGE := $(boot)/loader.bin diff --git a/arch/riscv/kernel/compat_vdso/Makefile b/arch/riscv/kernel/compat_vdso/Makefile index b86e5e2c3aea..62fa393b2eb2 100644 --- a/arch/riscv/kernel/compat_vdso/Makefile +++ b/arch/riscv/kernel/compat_vdso/Makefile @@ -76,13 +76,3 @@ quiet_cmd_compat_vdsold = VDSOLD $@ # actual build commands quiet_cmd_compat_vdsoas = VDSOAS $@ cmd_compat_vdsoas = $(COMPAT_CC) $(a_flags) $(COMPAT_CC_FLAGS) -c -o $@ $< - -# install commands for the unstripped file -quiet_cmd_compat_vdso_install = INSTALL $@ - cmd_compat_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/compat_vdso/$@ - -compat_vdso.so: $(obj)/compat_vdso.so.dbg - @mkdir -p $(MODLIB)/compat_vdso - $(call cmd,compat_vdso_install) - -compat_vdso_install: compat_vdso.so diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile index 6b1dba11bf6d..e8aa7c380007 100644 --- a/arch/riscv/kernel/vdso/Makefile +++ b/arch/riscv/kernel/vdso/Makefile @@ -73,13 +73,3 @@ quiet_cmd_vdsold = VDSOLD $@ cmd_vdsold = $(LD) $(ld_flags) -T $(filter-out FORCE,$^) -o $@.tmp && \ $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \ rm $@.tmp - -# install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso.so: $(obj)/vdso.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso.so diff --git a/arch/s390/Makefile b/arch/s390/Makefile index a53a36ee0731..73873e451686 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -138,9 +138,6 @@ bzImage: vmlinux zfcpdump: $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ -vdso_install: - $(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@ - archheaders: $(Q)$(MAKE) $(build)=$(syscalls) uapi @@ -160,6 +157,9 @@ vdso_prepare: prepare0 $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \ $(build)=arch/s390/kernel/vdso32 include/generated/vdso32-offsets.h) +vdso-install-y += arch/s390/kernel/vdso64/vdso64.so.dbg +vdso-install-$(CONFIG_COMPAT) += arch/s390/kernel/vdso32/vdso32.so.dbg + ifdef CONFIG_EXPOLINE_EXTERN modules_prepare: expoline_prepare expoline_prepare: scripts diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile index 23e868b79a6c..caec7db6f966 100644 --- a/arch/s390/kernel/vdso32/Makefile +++ b/arch/s390/kernel/vdso32/Makefile @@ -61,16 +61,6 @@ quiet_cmd_vdso32as = VDSO32A $@ quiet_cmd_vdso32cc = VDSO32C $@ cmd_vdso32cc = $(CC) $(c_flags) -c -o $@ $< -# install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso32.so: $(obj)/vdso32.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso32.so - # Generate VDSO offsets using helper script gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile index fc1c6ff8178f..e3c9085f8fa7 100644 --- a/arch/s390/kernel/vdso64/Makefile +++ b/arch/s390/kernel/vdso64/Makefile @@ -70,16 +70,6 @@ quiet_cmd_vdso64as = VDSO64A $@ quiet_cmd_vdso64cc = VDSO64C $@ cmd_vdso64cc = $(CC) $(c_flags) -c -o $@ $< -# install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso64.so: $(obj)/vdso64.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso64.so - # Generate VDSO offsets using helper script gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile index 7417345c6639..5f6035936131 100644 --- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -76,9 +76,8 @@ install: archheaders: $(Q)$(MAKE) $(build)=arch/sparc/kernel/syscalls all -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/sparc/vdso $@ +vdso-install-$(CONFIG_SPARC64) += arch/sparc/vdso/vdso64.so.dbg +vdso-install-$(CONFIG_COMPAT) += arch/sparc/vdso/vdso32.so.dbg # This is the image used for packaging KBUILD_IMAGE := $(boot)/zImage diff --git a/arch/sparc/vdso/Makefile b/arch/sparc/vdso/Makefile index 77d7b9032158..d08c3a0443f3 100644 --- a/arch/sparc/vdso/Makefile +++ b/arch/sparc/vdso/Makefile @@ -116,30 +116,3 @@ quiet_cmd_vdso = VDSO $@ VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 -Bsymbolic GCOV_PROFILE := n - -# -# Install the unstripped copies of vdso*.so. If our toolchain supports -# build-id, install .build-id links as well. -# -quiet_cmd_vdso_install = INSTALL $(@:install_%=%) -define cmd_vdso_install - cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \ - if readelf -n $< |grep -q 'Build ID'; then \ - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ - first=`echo $$buildid | cut -b-2`; \ - last=`echo $$buildid | cut -b3-`; \ - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ - ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ - fi -endef - -vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%) - -$(MODLIB)/vdso: FORCE - @mkdir -p $(MODLIB)/vdso - -$(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso FORCE - $(call cmd,vdso_install) - -PHONY += vdso_install $(vdso_img_insttargets) -vdso_install: $(vdso_img_insttargets) FORCE diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 5bfe5caaa444..3ff53a2d4ff0 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -291,9 +291,10 @@ PHONY += install install: $(call cmd,install) -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@ +vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg +vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg +vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg +vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg archprepare: checkbin checkbin: diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile index 6a1821bd7d5e..c197efd82922 100644 --- a/arch/x86/entry/vdso/Makefile +++ b/arch/x86/entry/vdso/Makefile @@ -190,31 +190,4 @@ GCOV_PROFILE := n quiet_cmd_vdso_and_check = VDSO $@ cmd_vdso_and_check = $(cmd_vdso); $(cmd_vdso_check) -# -# Install the unstripped copies of vdso*.so. If our toolchain supports -# build-id, install .build-id links as well. -# -quiet_cmd_vdso_install = INSTALL $(@:install_%=%) -define cmd_vdso_install - cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \ - if readelf -n $< |grep -q 'Build ID'; then \ - buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ - first=`echo $$buildid | cut -b-2`; \ - last=`echo $$buildid | cut -b3-`; \ - mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ - ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ - fi -endef - -vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%) - -$(MODLIB)/vdso: FORCE - @mkdir -p $(MODLIB)/vdso - -$(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso - $(call cmd,vdso_install) - -PHONY += vdso_install $(vdso_img_insttargets) -vdso_install: $(vdso_img_insttargets) - clean-files := vdso32.so vdso32.so.dbg vdso64* vdso-image-*.c vdsox32.so* diff --git a/scripts/Makefile.vdsoinst b/scripts/Makefile.vdsoinst new file mode 100644 index 000000000000..1022d9fdd976 --- /dev/null +++ b/scripts/Makefile.vdsoinst @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only +# ========================================================================== +# Install unstripped copies of vDSO +# ========================================================================== + +PHONY := __default +__default: + @: + +include $(srctree)/scripts/Kbuild.include + +install-dir := $(MODLIB)/vdso + +define gen_install_rules + +src := $$(firstword $$(subst :,$(space),$(1))) +dest := $(install-dir)/$$(or $$(word 2,$$(subst :,$(space),$(1))),$$(patsubst %.dbg,%,$$(notdir $(1)))) + +__default: $$(dest) +$$(dest): $$(src) FORCE + $$(call cmd,install) + +# Some architectures create .build-id symlinks +ifneq ($(filter arm sparc x86, $(SRCARCH)),) +link := $(install-dir)/.build-id/$$(shell $(READELF) -n $$(src) | sed -n 's@^.*Build ID: \(..\)\(.*\)@\1/\2@p') + +__default: $$(link) +$$(link): $$(dest) FORCE + $$(call cmd,symlink) +endif + +endef + +$(foreach x, $(sort $(INSTALL_FILES)), $(eval $(call gen_install_rules,$(x)))) + +quiet_cmd_install = INSTALL $@ + cmd_install = mkdir -p $(dir $@); cp $< $@ + +quiet_cmd_symlink = SYMLINK $@ + cmd_symlink = mkdir -p $(dir $@); ln -sf --relative $< $@ + +PHONY += FORCE +FORCE: + +.PHONY: $(PHONY)
Currently, there is no standard implementation for vdso_install, leading to various issues: 1. Code duplication Many architectures duplicate similar code just for copying files to the install destination. Some architectures (arm, sparc, x86) create build-id symlinks, introducing more code duplication. 2. Accidental updates of in-tree build artifacts The vdso_install rule depends on the vdso files to install. It may update in-tree build artifacts. This can be problematic, as explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). 3. Broken code in some architectures Makefile code is often copied from one architecture to another without proper adaptation or testing. The previous commits removed broken code from csky, UML, and parisc. Another issue is that 'make vdso_install' for ARCH=s390 installs vdso64, but not vdso32. To address these problems, this commit introduces the generic vdso_install. Architectures that support vdso_install need to define vdso-install-y in arch/*/Makefile. vdso-install-y lists the files to install. For example, arch/x86/Makefile looks like this: vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, if exists, stripped away. vdso-install-y can optionally take the second field after the colon separator. This is needed because some architectures install vdso files as a different base name. The following is a snippet from arch/arm64/Makefile. vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so This will rename vdso.so.dbg to vdso32.so during installation. If such architectures change their implementation so that the file names match, this workaround will go away. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> --- Makefile | 9 ++++++ arch/arm/Makefile | 7 +--- arch/arm/vdso/Makefile | 25 -------------- arch/arm64/Makefile | 9 ++---- arch/arm64/kernel/vdso/Makefile | 10 ------ arch/arm64/kernel/vdso32/Makefile | 10 ------ arch/loongarch/Makefile | 4 +-- arch/loongarch/vdso/Makefile | 10 ------ arch/riscv/Makefile | 9 ++---- arch/riscv/kernel/compat_vdso/Makefile | 10 ------ arch/riscv/kernel/vdso/Makefile | 10 ------ arch/s390/Makefile | 6 ++-- arch/s390/kernel/vdso32/Makefile | 10 ------ arch/s390/kernel/vdso64/Makefile | 10 ------ arch/sparc/Makefile | 5 ++- arch/sparc/vdso/Makefile | 27 ---------------- arch/x86/Makefile | 7 ++-- arch/x86/entry/vdso/Makefile | 27 ---------------- scripts/Makefile.vdsoinst | 45 ++++++++++++++++++++++++++ 19 files changed, 71 insertions(+), 179 deletions(-) create mode 100644 scripts/Makefile.vdsoinst