Message ID | 20231214072839.2367-12-minda.chen@starfivetech.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Refactoring Microchip PCIe driver and add StarFive PCIe | expand |
On Thu, Dec 14, 2023 at 03:28:29PM +0800, Minda Chen wrote: > The event num is different in other platform. For re-using interrupt > process codes, replace macros with variable. "The number of events is different across platforms. In order to share interrupt processing code, add a variable that defines the number of events so that it can be set per-platform instead of hardcoding it". Lorenzo > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > --- > drivers/pci/controller/plda/pcie-microchip-host.c | 8 +++++--- > drivers/pci/controller/plda/pcie-plda.h | 1 + > 2 files changed, 6 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c > index 506e6eeadc76..7b3f4f74745d 100644 > --- a/drivers/pci/controller/plda/pcie-microchip-host.c > +++ b/drivers/pci/controller/plda/pcie-microchip-host.c > @@ -654,7 +654,7 @@ static void plda_handle_event(struct irq_desc *desc) > > events = mc_get_events(port); > > - for_each_set_bit(bit, &events, NUM_EVENTS) > + for_each_set_bit(bit, &events, port->num_events) > generic_handle_domain_irq(port->event_domain, bit); > > chained_irq_exit(chip, desc); > @@ -817,7 +817,8 @@ static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port) > return -EINVAL; > } > > - port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS, > + port->event_domain = irq_domain_add_linear(pcie_intc_node, > + port->num_events, > &plda_event_domain_ops, > port); > if (!port->event_domain) { > @@ -921,7 +922,7 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r > if (irq < 0) > return -ENODEV; > > - for (i = 0; i < NUM_EVENTS; i++) { > + for (i = 0; i < port->num_events; i++) { > event_irq = irq_create_mapping(port->event_domain, i); > if (!event_irq) { > dev_err(dev, "failed to map hwirq %d\n", i); > @@ -1013,6 +1014,7 @@ static int mc_host_probe(struct platform_device *pdev) > > bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR; > plda->bridge_addr = bridge_base_addr; > + plda->num_events = NUM_EVENTS; > > /* Allow enabling MSI by disabling MSI-X */ > val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0); > diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h > index 3deefd35fa5a..e3d35cef9894 100644 > --- a/drivers/pci/controller/plda/pcie-plda.h > +++ b/drivers/pci/controller/plda/pcie-plda.h > @@ -118,6 +118,7 @@ struct plda_pcie_rp { > raw_spinlock_t lock; > struct plda_msi msi; > void __iomem *bridge_addr; > + int num_events; > }; > > void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, > -- > 2.17.1 >
On 2023/12/27 23:55, Lorenzo Pieralisi wrote: > On Thu, Dec 14, 2023 at 03:28:29PM +0800, Minda Chen wrote: >> The event num is different in other platform. For re-using interrupt >> process codes, replace macros with variable. > > "The number of events is different across platforms. In order to > share interrupt processing code, add a variable that defines the > number of events so that it can be set per-platform instead of > hardcoding it". > > Lorenzo > Thanks for reviewing. Happy new year! All the maintainers: Happy new year! >> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> >> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> >> --- >> drivers/pci/controller/plda/pcie-microchip-host.c | 8 +++++--- >> drivers/pci/controller/plda/pcie-plda.h | 1 + >> 2 files changed, 6 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c >> index 506e6eeadc76..7b3f4f74745d 100644 >> --- a/drivers/pci/controller/plda/pcie-microchip-host.c >> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c >> @@ -654,7 +654,7 @@ static void plda_handle_event(struct irq_desc *desc) >> >> events = mc_get_events(port); >> >> - for_each_set_bit(bit, &events, NUM_EVENTS) >> + for_each_set_bit(bit, &events, port->num_events) >> generic_handle_domain_irq(port->event_domain, bit); >> >> chained_irq_exit(chip, desc); >> @@ -817,7 +817,8 @@ static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port) >> return -EINVAL; >> } >> >> - port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS, >> + port->event_domain = irq_domain_add_linear(pcie_intc_node, >> + port->num_events, >> &plda_event_domain_ops, >> port); >> if (!port->event_domain) { >> @@ -921,7 +922,7 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r >> if (irq < 0) >> return -ENODEV; >> >> - for (i = 0; i < NUM_EVENTS; i++) { >> + for (i = 0; i < port->num_events; i++) { >> event_irq = irq_create_mapping(port->event_domain, i); >> if (!event_irq) { >> dev_err(dev, "failed to map hwirq %d\n", i); >> @@ -1013,6 +1014,7 @@ static int mc_host_probe(struct platform_device *pdev) >> >> bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR; >> plda->bridge_addr = bridge_base_addr; >> + plda->num_events = NUM_EVENTS; >> >> /* Allow enabling MSI by disabling MSI-X */ >> val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0); >> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h >> index 3deefd35fa5a..e3d35cef9894 100644 >> --- a/drivers/pci/controller/plda/pcie-plda.h >> +++ b/drivers/pci/controller/plda/pcie-plda.h >> @@ -118,6 +118,7 @@ struct plda_pcie_rp { >> raw_spinlock_t lock; >> struct plda_msi msi; >> void __iomem *bridge_addr; >> + int num_events; >> }; >> >> void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, >> -- >> 2.17.1 >>
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c index 506e6eeadc76..7b3f4f74745d 100644 --- a/drivers/pci/controller/plda/pcie-microchip-host.c +++ b/drivers/pci/controller/plda/pcie-microchip-host.c @@ -654,7 +654,7 @@ static void plda_handle_event(struct irq_desc *desc) events = mc_get_events(port); - for_each_set_bit(bit, &events, NUM_EVENTS) + for_each_set_bit(bit, &events, port->num_events) generic_handle_domain_irq(port->event_domain, bit); chained_irq_exit(chip, desc); @@ -817,7 +817,8 @@ static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port) return -EINVAL; } - port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS, + port->event_domain = irq_domain_add_linear(pcie_intc_node, + port->num_events, &plda_event_domain_ops, port); if (!port->event_domain) { @@ -921,7 +922,7 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r if (irq < 0) return -ENODEV; - for (i = 0; i < NUM_EVENTS; i++) { + for (i = 0; i < port->num_events; i++) { event_irq = irq_create_mapping(port->event_domain, i); if (!event_irq) { dev_err(dev, "failed to map hwirq %d\n", i); @@ -1013,6 +1014,7 @@ static int mc_host_probe(struct platform_device *pdev) bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR; plda->bridge_addr = bridge_base_addr; + plda->num_events = NUM_EVENTS; /* Allow enabling MSI by disabling MSI-X */ val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0); diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h index 3deefd35fa5a..e3d35cef9894 100644 --- a/drivers/pci/controller/plda/pcie-plda.h +++ b/drivers/pci/controller/plda/pcie-plda.h @@ -118,6 +118,7 @@ struct plda_pcie_rp { raw_spinlock_t lock; struct plda_msi msi; void __iomem *bridge_addr; + int num_events; }; void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,