| Message ID | 20240410033148.213991-3-xingyu.wu@starfivetech.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Conor Dooley |
| Headers | show |
| Series | Add notifier for PLL0 clock and set it 1.5GHz on | expand |
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 45b58b6f3df8..28981b267de4 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -390,6 +390,12 @@ spi_dev0: spi@0 { }; }; +&syscrg { + assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>, + <&pllclk JH7110_PLLCLK_PLL0_OUT>; + assigned-clock-rates = <500000000>, <1500000000>; +}; + &sysgpio { i2c0_pins: i2c0-0 { i2c-pins {
CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz. But now PLL0 rate is 1GHz and the cpu frequency loads become 333/500/500/1000MHz in fact. So PLL0 rate should be default set to 1.5GHz and set the cpu_core rate to 500MHz in safe. Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC") Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> --- .../boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)