diff mbox series

[v1,2/2] riscv: dts: starfive: Enable Bluetooth on JH7100 boards

Message ID 20240508111604.887466-3-emil.renner.berthing@canonical.com (mailing list archive)
State New
Delegated to: Conor Dooley
Headers show
Series riscv: dts: starfive: Enable Bluetooth on JH7100 boards | expand

Checks

Context Check Description
conchuod/vmtest-for-next-PR fail PR summary
conchuod/patch-2-test-1 success .github/scripts/patches/tests/build_rv32_defconfig.sh
conchuod/patch-2-test-2 fail .github/scripts/patches/tests/build_rv64_clang_allmodconfig.sh
conchuod/patch-2-test-3 fail .github/scripts/patches/tests/build_rv64_gcc_allmodconfig.sh
conchuod/patch-2-test-4 success .github/scripts/patches/tests/build_rv64_nommu_k210_defconfig.sh
conchuod/patch-2-test-5 success .github/scripts/patches/tests/build_rv64_nommu_virt_defconfig.sh
conchuod/patch-2-test-6 success .github/scripts/patches/tests/checkpatch.sh
conchuod/patch-2-test-7 success .github/scripts/patches/tests/dtb_warn_rv64.sh
conchuod/patch-2-test-8 success .github/scripts/patches/tests/header_inline.sh
conchuod/patch-2-test-9 success .github/scripts/patches/tests/kdoc.sh
conchuod/patch-2-test-10 success .github/scripts/patches/tests/module_param.sh
conchuod/patch-2-test-11 success .github/scripts/patches/tests/verify_fixes.sh
conchuod/patch-2-test-12 success .github/scripts/patches/tests/verify_signedoff.sh

Commit Message

Emil Renner Berthing May 8, 2024, 11:15 a.m. UTC 
From: Emil Renner Berthing <kernel@esmil.dk>

Add pinctrl and UART nodes for the Broadcom Wifi/Bluetooth module on the
BeagleV Starlight and StarFive VisionFive V1 boards.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 .../boot/dts/starfive/jh7100-common.dtsi      | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index ae1a6aeb0aea..1f79481bfd96 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -289,6 +289,41 @@  GPO_SDIO1_PAD_CDATA_OEN_BIT3,
 		};
 	};
 
+	uart0_pins: uart0-0 {
+		rx-pins {
+			pinmux = <GPIOMUX(40, GPO_LOW, GPO_DISABLE,
+				  GPI_UART0_PAD_SIN)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+		};
+		tx-pins {
+			pinmux = <GPIOMUX(41, GPO_UART0_PAD_SOUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+		};
+		cts-pins {
+			pinmux = <GPIOMUX(39, GPO_LOW, GPO_DISABLE,
+				  GPI_UART0_PAD_CTSN)>;
+			bias-pull-down;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+		};
+		rts-pins {
+			pinmux = <GPIOMUX(42, GPO_UART0_PAD_RTSN,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
 	uart3_pins: uart3-0 {
 		rx-pins {
 			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
@@ -393,6 +428,20 @@  wifi@1 {
 	};
 };
 
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <4000000>;
+		device-wakeup-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;