diff mbox series

[RFC,v7,2/6] dt-bindings: interrupt-controller: document PolarFire SoC's gpio interrupt mux

Message ID 20240723-uncouple-enforcer-7c48e4a4fefe@wendy (mailing list archive)
State RFC
Delegated to: Conor Dooley
Headers show
Series PolarFire SoC GPIO support | expand

Checks

Context Check Description
conchuod/vmtest-for-next-PR fail PR summary
conchuod/patch-2-test-1 success .github/scripts/patches/tests/build_rv32_defconfig.sh
conchuod/patch-2-test-2 success .github/scripts/patches/tests/build_rv64_clang_allmodconfig.sh
conchuod/patch-2-test-3 success .github/scripts/patches/tests/build_rv64_gcc_allmodconfig.sh
conchuod/patch-2-test-4 success .github/scripts/patches/tests/build_rv64_nommu_k210_defconfig.sh
conchuod/patch-2-test-5 success .github/scripts/patches/tests/build_rv64_nommu_virt_defconfig.sh
conchuod/patch-2-test-6 warning .github/scripts/patches/tests/checkpatch.sh
conchuod/patch-2-test-7 success .github/scripts/patches/tests/dtb_warn_rv64.sh
conchuod/patch-2-test-8 success .github/scripts/patches/tests/header_inline.sh
conchuod/patch-2-test-9 success .github/scripts/patches/tests/kdoc.sh
conchuod/patch-2-test-10 success .github/scripts/patches/tests/module_param.sh
conchuod/patch-2-test-11 success .github/scripts/patches/tests/verify_fixes.sh
conchuod/patch-2-test-12 success .github/scripts/patches/tests/verify_signedoff.sh

Commit Message

Conor Dooley July 23, 2024, 11:27 a.m. UTC 
On PolarFire SoC there are more GPIO interrupts than there are interrupt
lines available on the PLIC, and a runtime configurable mux is used to
decide which interrupts are assigned direct connections to the PLIC &
which are relegated to sharing a line.
This mux is, in our reference configuration, written by platform
firmware during boot based on the FPGA's configuration.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../microchip,mpfs-gpio-irq-mux.yaml          | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml

Comments

Krzysztof Kozlowski July 24, 2024, 1:27 p.m. UTC | #1 
On 23/07/2024 13:27, Conor Dooley wrote:
> On PolarFire SoC there are more GPIO interrupts than there are interrupt
> lines available on the PLIC, and a runtime configurable mux is used to
> decide which interrupts are assigned direct connections to the PLIC &
> which are relegated to sharing a line.
> This mux is, in our reference configuration, written by platform
> firmware during boot based on the FPGA's configuration.
> 
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../microchip,mpfs-gpio-irq-mux.yaml          | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml
> new file mode 100644
> index 0000000000000..89ed3a630eef3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip Polarfire SoC GPIO Interrupt Mux
> +
> +maintainers:
> +  - Conor Dooley <conor.dooley@microchip.com>
> +
> +description: |
> +  There are 3 GPIO controllers on this SoC, of which:
> +  - GPIO controller 0 has 14 GPIOs
> +  - GPIO controller 1 has 24 GPIOs
> +  - GPIO controller 2 has 32 GPIOs
> +
> +  All GPIOs are capable of generating interrupts, for a total of 70.
> +  There are only 41 IRQs available however, so a configurable mux is used to
> +  ensure all GPIOs can be used for interrupt generation.
> +  38 of the 41 interrupts are in what the documentation calls "direct mode",
> +  as they provide an exclusive connection from a GPIO to the PLIC.
> +  The 3 remaining interrupts are used to mux the interrupts which do not have
> +  a exclusive connection, one for each GPIO controller.
> +
> +properties:
> +  compatible:
> +    const: microchip,mpfs-gpio-irq-mux
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupts:
> +    description:
> +      The first 38 entries must be the "direct" interrupts, for exclusive
> +      connections to the PLIC. The final 3 entries must be the
> +      "non-direct"/muxed connections for each of GPIO controller 0, 1 & 2
> +      respectively.
> +    maxItems: 41
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#

Please put allOf: after required:.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#interrupt-cells"
> +  - interrupt-controller

and here keep the same order as in properties, so
controller+cells+interrupts.

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    irqmux: interrupt-controller@20002054 {
> +        compatible = "microchip,mpfs-gpio-irq-mux";
> +        reg = <0x20002054 0x4>;
> +        interrupt-parent = <&plic>;
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +        status = "okay";

Drop status


Best regards,
Krzysztof
Conor Dooley July 24, 2024, 2:21 p.m. UTC | #2 
On Wed, Jul 24, 2024 at 03:27:21PM +0200, Krzysztof Kozlowski wrote:

> > +examples:
> > +  - |
> > +    irqmux: interrupt-controller@20002054 {
> > +        compatible = "microchip,mpfs-gpio-irq-mux";
> > +        reg = <0x20002054 0x4>;
> > +        interrupt-parent = <&plic>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <1>;
> > +        status = "okay";
> 
> Drop status

And the label too.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml
new file mode 100644
index 0000000000000..89ed3a630eef3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml
@@ -0,0 +1,79 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,mpfs-gpio-irq-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Polarfire SoC GPIO Interrupt Mux
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  There are 3 GPIO controllers on this SoC, of which:
+  - GPIO controller 0 has 14 GPIOs
+  - GPIO controller 1 has 24 GPIOs
+  - GPIO controller 2 has 32 GPIOs
+
+  All GPIOs are capable of generating interrupts, for a total of 70.
+  There are only 41 IRQs available however, so a configurable mux is used to
+  ensure all GPIOs can be used for interrupt generation.
+  38 of the 41 interrupts are in what the documentation calls "direct mode",
+  as they provide an exclusive connection from a GPIO to the PLIC.
+  The 3 remaining interrupts are used to mux the interrupts which do not have
+  a exclusive connection, one for each GPIO controller.
+
+properties:
+  compatible:
+    const: microchip,mpfs-gpio-irq-mux
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description:
+      The first 38 entries must be the "direct" interrupts, for exclusive
+      connections to the PLIC. The final 3 entries must be the
+      "non-direct"/muxed connections for each of GPIO controller 0, 1 & 2
+      respectively.
+    maxItems: 41
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    irqmux: interrupt-controller@20002054 {
+        compatible = "microchip,mpfs-gpio-irq-mux";
+        reg = <0x20002054 0x4>;
+        interrupt-parent = <&plic>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        status = "okay";
+        interrupts = <13>, <14>, <15>, <16>,
+                     <17>, <18>, <19>, <20>,
+                     <21>, <22>, <23>, <24>,
+                     <25>, <26>, <27>, <28>,
+                     <29>, <30>, <31>, <32>,
+                     <33>, <34>, <35>, <36>,
+                     <37>, <38>, <39>, <40>,
+                     <41>, <42>, <43>, <44>,
+                     <45>, <46>, <47>, <48>,
+                     <49>, <50>, <51>, <52>,
+                     <53>;
+    };
+...