@@ -4,6 +4,7 @@
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
+#include <linux/acpi.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/cpu.h>
@@ -189,17 +190,22 @@ static int aplic_direct_starting_cpu(unsigned int cpu)
}
static int aplic_direct_parse_parent_hwirq(struct device *dev, u32 index,
- u32 *parent_hwirq, unsigned long *parent_hartid)
+ u32 *parent_hwirq, unsigned long *parent_hartid,
+ struct aplic_priv *priv)
{
struct of_phandle_args parent;
+ unsigned long hartid;
int rc;
- /*
- * Currently, only OF fwnode is supported so extend this
- * function for ACPI support.
- */
- if (!is_of_node(dev->fwnode))
- return -EINVAL;
+ if (!is_of_node(dev->fwnode)) {
+ hartid = acpi_rintc_ext_parent_to_hartid(priv->acpi_aplic_id, index);
+ if (hartid == INVALID_HARTID)
+ return -ENODEV;
+
+ *parent_hartid = hartid;
+ *parent_hwirq = RV_IRQ_EXT;
+ return 0;
+ }
rc = of_irq_parse_one(to_of_node(dev->fwnode), index, &parent);
if (rc)
@@ -237,7 +243,7 @@ int aplic_direct_setup(struct device *dev, void __iomem *regs)
/* Setup per-CPU IDC and target CPU mask */
current_cpu = get_cpu();
for (i = 0; i < priv->nr_idcs; i++) {
- rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid);
+ rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid, priv);
if (rc) {
dev_warn(dev, "parent irq for IDC%d not found\n", i);
continue;
@@ -4,8 +4,10 @@
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
+#include <linux/acpi.h>
#include <linux/bitfield.h>
#include <linux/irqchip/riscv-aplic.h>
+#include <linux/irqchip/riscv-imsic.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
@@ -125,39 +127,50 @@ static void aplic_init_hw_irqs(struct aplic_priv *priv)
writel(0, priv->regs + APLIC_DOMAINCFG);
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id aplic_acpi_match[] = {
+ { "RSCV0002", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, aplic_acpi_match);
+
+#endif
+
int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, void __iomem *regs)
{
struct device_node *np = to_of_node(dev->fwnode);
struct of_phandle_args parent;
int rc;
- /*
- * Currently, only OF fwnode is supported so extend this
- * function for ACPI support.
- */
- if (!np)
- return -EINVAL;
-
/* Save device pointer and register base */
priv->dev = dev;
priv->regs = regs;
- /* Find out number of interrupt sources */
- rc = of_property_read_u32(np, "riscv,num-sources", &priv->nr_irqs);
- if (rc) {
- dev_err(dev, "failed to get number of interrupt sources\n");
- return rc;
- }
+ if (np) {
+ /* Find out number of interrupt sources */
+ rc = of_property_read_u32(np, "riscv,num-sources", &priv->nr_irqs);
+ if (rc) {
+ dev_err(dev, "failed to get number of interrupt sources\n");
+ return rc;
+ }
- /*
- * Find out number of IDCs based on parent interrupts
- *
- * If "msi-parent" property is present then we ignore the
- * APLIC IDCs which forces the APLIC driver to use MSI mode.
- */
- if (!of_property_present(np, "msi-parent")) {
- while (!of_irq_parse_one(np, priv->nr_idcs, &parent))
- priv->nr_idcs++;
+ /*
+ * Find out number of IDCs based on parent interrupts
+ *
+ * If "msi-parent" property is present then we ignore the
+ * APLIC IDCs which forces the APLIC driver to use MSI mode.
+ */
+ if (!of_property_present(np, "msi-parent")) {
+ while (!of_irq_parse_one(np, priv->nr_idcs, &parent))
+ priv->nr_idcs++;
+ }
+ } else {
+ rc = riscv_acpi_get_gsi_info(dev->fwnode, &priv->gsi_base, &priv->acpi_aplic_id,
+ &priv->nr_irqs, &priv->nr_idcs);
+ if (rc) {
+ dev_err(dev, "failed to find GSI mapping\n");
+ return rc;
+ }
}
/* Setup initial state APLIC interrupts */
@@ -184,7 +197,11 @@ static int aplic_probe(struct platform_device *pdev)
* If msi-parent property is present then setup APLIC MSI
* mode otherwise setup APLIC direct mode.
*/
- msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent");
+ if (is_of_node(dev->fwnode))
+ msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent");
+ else
+ msi_mode = imsic_acpi_get_fwnode(NULL) ? 1 : 0;
+
if (msi_mode)
rc = aplic_msi_setup(dev, regs);
else
@@ -192,6 +209,11 @@ static int aplic_probe(struct platform_device *pdev)
if (rc)
dev_err(dev, "failed to setup APLIC in %s mode\n", msi_mode ? "MSI" : "direct");
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled)
+ acpi_dev_clear_dependencies(ACPI_COMPANION(dev));
+#endif
+
return rc;
}
@@ -204,6 +226,7 @@ static struct platform_driver aplic_driver = {
.driver = {
.name = "riscv-aplic",
.of_match_table = aplic_match,
+ .acpi_match_table = ACPI_PTR(aplic_acpi_match),
},
.probe = aplic_probe,
};
@@ -28,6 +28,7 @@ struct aplic_priv {
u32 gsi_base;
u32 nr_irqs;
u32 nr_idcs;
+ u32 acpi_aplic_id;
void __iomem *regs;
struct aplic_msicfg msicfg;
};
@@ -175,6 +175,7 @@ static const struct msi_domain_template aplic_msi_template = {
int aplic_msi_setup(struct device *dev, void __iomem *regs)
{
const struct imsic_global_config *imsic_global;
+ struct irq_domain *msi_domain;
struct aplic_priv *priv;
struct aplic_msicfg *mc;
phys_addr_t pa;
@@ -257,8 +258,14 @@ int aplic_msi_setup(struct device *dev, void __iomem *regs)
* IMSIC and the IMSIC MSI domains are created later through
* the platform driver probing so we set it explicitly here.
*/
- if (is_of_node(dev->fwnode))
+ if (is_of_node(dev->fwnode)) {
of_msi_configure(dev, to_of_node(dev->fwnode));
+ } else {
+ msi_domain = irq_find_matching_fwnode(imsic_acpi_get_fwnode(dev),
+ DOMAIN_BUS_PLATFORM_MSI);
+ if (msi_domain)
+ dev_set_msi_domain(dev, msi_domain);
+ }
}
if (!msi_create_device_irq_domain(dev, MSI_DEFAULT_DOMAIN, &aplic_msi_template,