@@ -99,6 +99,7 @@ properties:
- snps,dwxgmac-2.10
- starfive,jh7100-dwmac
- starfive,jh7110-dwmac
+ - thead,th1520-gmac
reg:
minItems: 1
new file mode 100644
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/thead,th1520-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 GMAC Ethernet controller
+
+maintainers:
+ - Drew Fustini <dfustini@tenstorrent.com>
+
+description: |
+ The TH1520 GMAC is described in the TH1520 Peripheral Interface User Manual
+ https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
+
+ Features include
+ - Compliant with IEEE802.3 Specification
+ - IEEE 1588-2008 standard for precision networked clock synchronization
+ - Supports 10/100/1000Mbps data transfer rate
+ - Supports RGMII/MII interface
+ - Preamble and start of frame data (SFD) insertion in Transmit path
+ - Preamble and SFD deletion in the Receive path
+ - Automatic CRC and pad generation options for receive frames
+ - MDIO master interface for PHY device configuration and management
+
+ The GMAC Registers consists of two parts
+ - APB registers are used to configure clock frequency/clock enable/clock
+ direction/PHY interface type.
+ - AHB registers are use to configure GMAC core (DesignWare Core part).
+ GMAC core register consists of DMA registers and GMAC registers.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - thead,th1520-gmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - thead,th1520-gmac
+ - const: snps,dwmac-3.70a
+
+ reg:
+ items:
+ - description: DesignWare GMAC IP core registers
+ - description: GMAC APB registers
+
+ reg-names:
+ items:
+ - const: dwmac
+ - const: apb
+
+ clocks:
+ items:
+ - description: GMAC main clock
+ - description: Peripheral registers interface clock
+
+ clock-names:
+ items:
+ - const: stmmaceth
+ - const: pclk
+
+ interrupts:
+ items:
+ - description: Combined signal for various interrupt events
+
+ interrupt-names:
+ items:
+ - const: macirq
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ gmac0: ethernet@e7070000 {
+ compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
+ reg = <0xe7070000 0x2000>, <0xec003000 0x1000>;
+ reg-names = "dwmac", "apb";
+ clocks = <&clk 1>, <&clk 2>;
+ clock-names = "stmmaceth", "pclk";
+ interrupts = <66>;
+ interrupt-names = "macirq";
+ phy-mode = "rgmii-id";
+ snps,fixed-burst;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
@@ -20066,6 +20066,7 @@ L: linux-riscv@lists.infradead.org
S: Maintained
T: git https://github.com/pdp7/linux.git
F: Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
+F: Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
F: Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
F: arch/riscv/boot/dts/thead/
F: drivers/clk/thead/clk-th1520-ap.c