Message ID | 20241106175102.219923-6-ajones@ventanamicro.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | iommu/riscv: Add platform msi support | expand |
Context | Check | Description |
---|---|---|
conchuod/vmtest-fixes-PR | fail | merge-conflict |
Hi Drew, On 2024-11-06 11:51 AM, Andrew Jones wrote: > Apply platform_device_msi_init_and_alloc_irqs() to add support for > MSIs when the IOMMU is a platform device. > > Signed-off-by: Andrew Jones <ajones@ventanamicro.com> > --- > drivers/iommu/riscv/iommu-platform.c | 102 ++++++++++++++++++++++----- > 1 file changed, 84 insertions(+), 18 deletions(-) > > diff --git a/drivers/iommu/riscv/iommu-platform.c b/drivers/iommu/riscv/iommu-platform.c > index da336863f152..89aa622bcbde 100644 > --- a/drivers/iommu/riscv/iommu-platform.c > +++ b/drivers/iommu/riscv/iommu-platform.c > @@ -11,18 +11,41 @@ > */ > > #include <linux/kernel.h> > +#include <linux/of_irq.h> > #include <linux/of_platform.h> > #include <linux/platform_device.h> > +#include <linux/msi.h> If you respin, please keep these sorted. > > #include "iommu-bits.h" > #include "iommu.h" > > +static void riscv_iommu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) > +{ > + struct device *dev = msi_desc_to_dev(desc); > + struct riscv_iommu_device *iommu = dev_get_drvdata(dev); > + u16 idx = desc->msi_index; > + u64 addr; > + > + addr = ((u64)msg->address_hi << 32) | msg->address_lo; > + > + if (addr != (addr & RISCV_IOMMU_MSI_CFG_TBL_ADDR)) > + pr_warn_once("uh oh, the IOMMU can't send MSIs to 0x%llx, sending to 0x%llx instead\n", > + addr, addr & RISCV_IOMMU_MSI_CFG_TBL_ADDR); Can this use dev_warn_once()? And should it really be only a warning? Configuring the IOMMU to write to some other address seems dangerous. I guess there's no clean way to handle this error, since this function cannot fail, and irq_chip_compose_msi_msg() isn't supposed to fail either. > + > + addr &= RISCV_IOMMU_MSI_CFG_TBL_ADDR; > + > + riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_ADDR(idx), addr); > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_DATA(idx), msg->data); > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_CTRL(idx), 0); > +} > + > static int riscv_iommu_platform_probe(struct platform_device *pdev) > { > + enum riscv_iommu_igs_settings igs; > struct device *dev = &pdev->dev; > struct riscv_iommu_device *iommu = NULL; > struct resource *res = NULL; > - int vec; > + int vec, ret; > > iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL); > if (!iommu) > @@ -40,16 +63,6 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) > iommu->caps = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_CAPABILITIES); > iommu->fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL); > > - /* For now we only support WSI */ > - switch (FIELD_GET(RISCV_IOMMU_CAPABILITIES_IGS, iommu->caps)) { > - case RISCV_IOMMU_CAPABILITIES_IGS_WSI: > - case RISCV_IOMMU_CAPABILITIES_IGS_BOTH: > - break; > - default: > - return dev_err_probe(dev, -ENODEV, > - "unable to use wire-signaled interrupts\n"); > - } > - > iommu->irqs_count = platform_irq_count(pdev); > if (iommu->irqs_count <= 0) > return dev_err_probe(dev, -ENODEV, > @@ -57,13 +70,60 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) > if (iommu->irqs_count > RISCV_IOMMU_INTR_COUNT) > iommu->irqs_count = RISCV_IOMMU_INTR_COUNT; > > - for (vec = 0; vec < iommu->irqs_count; vec++) > - iommu->irqs[vec] = platform_get_irq(pdev, vec); > + igs = FIELD_GET(RISCV_IOMMU_CAPABILITIES_IGS, iommu->caps); > + switch (igs) { > + case RISCV_IOMMU_CAPABILITIES_IGS_BOTH: > + case RISCV_IOMMU_CAPABILITIES_IGS_MSI: > + if (is_of_node(dev->fwnode)) > + of_msi_configure(dev, to_of_node(dev->fwnode)); > + > + if (!dev_get_msi_domain(dev)) { > + dev_warn(dev, "failed to find an MSI domain"); > + goto msi_fail; > + } > + > + ret = platform_device_msi_init_and_alloc_irqs(dev, iommu->irqs_count, > + riscv_iommu_write_msi_msg); > + if (ret) { > + dev_warn(dev, "failed to allocate MSIs"); > + goto msi_fail; > + } > + > + for (vec = 0; vec < iommu->irqs_count; vec++) > + iommu->irqs[vec] = msi_get_virq(dev, vec); > + > + /* Enable message-signaled interrupts, fctl.WSI */ > + if (iommu->fctl & RISCV_IOMMU_FCTL_WSI) { > + iommu->fctl ^= RISCV_IOMMU_FCTL_WSI; > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); > + } > + > + dev_info(dev, "using MSIs\n"); > + break; > + > +msi_fail: > + if (igs != RISCV_IOMMU_CAPABILITIES_IGS_BOTH) { > + dev_warn(dev, "\n"); > + return dev_err_probe(dev, -ENODEV, > + "unable to use wire-signaled interrupts\n"); Is the dev_warn() just to call attention to the following error? There's no guarantee that these two messages will be printed adjacently. > + } > + > + dev_warn(dev, " - falling back to wired irqs\n"); No need for the extra hyphen here. Regards, Samuel > + fallthrough; > > - /* Enable wire-signaled interrupts, fctl.WSI */ > - if (!(iommu->fctl & RISCV_IOMMU_FCTL_WSI)) { > - iommu->fctl |= RISCV_IOMMU_FCTL_WSI; > - riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); > + case RISCV_IOMMU_CAPABILITIES_IGS_WSI: > + for (vec = 0; vec < iommu->irqs_count; vec++) > + iommu->irqs[vec] = platform_get_irq(pdev, vec); > + > + /* Enable wire-signaled interrupts, fctl.WSI */ > + if (!(iommu->fctl & RISCV_IOMMU_FCTL_WSI)) { > + iommu->fctl |= RISCV_IOMMU_FCTL_WSI; > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); > + } > + dev_info(dev, "using wire-signaled interrupts\n"); > + break; > + default: > + return dev_err_probe(dev, -ENODEV, "invalid IGS\n"); > } > > return riscv_iommu_init(iommu); > @@ -71,7 +131,13 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) > > static void riscv_iommu_platform_remove(struct platform_device *pdev) > { > - riscv_iommu_remove(dev_get_drvdata(&pdev->dev)); > + struct riscv_iommu_device *iommu = dev_get_drvdata(&pdev->dev); > + bool msi = !(iommu->fctl & RISCV_IOMMU_FCTL_WSI); > + > + riscv_iommu_remove(iommu); > + > + if (msi) > + platform_device_msi_free_irqs_all(&pdev->dev); > }; > > static const struct of_device_id riscv_iommu_of_match[] = {
On Wed, Nov 06, 2024 at 01:45:23PM -0600, Samuel Holland wrote: > Hi Drew, > > On 2024-11-06 11:51 AM, Andrew Jones wrote: > > Apply platform_device_msi_init_and_alloc_irqs() to add support for > > MSIs when the IOMMU is a platform device. > > > > Signed-off-by: Andrew Jones <ajones@ventanamicro.com> > > --- > > drivers/iommu/riscv/iommu-platform.c | 102 ++++++++++++++++++++++----- > > 1 file changed, 84 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/iommu/riscv/iommu-platform.c b/drivers/iommu/riscv/iommu-platform.c > > index da336863f152..89aa622bcbde 100644 > > --- a/drivers/iommu/riscv/iommu-platform.c > > +++ b/drivers/iommu/riscv/iommu-platform.c > > @@ -11,18 +11,41 @@ > > */ > > > > #include <linux/kernel.h> > > +#include <linux/of_irq.h> > > #include <linux/of_platform.h> > > #include <linux/platform_device.h> > > +#include <linux/msi.h> > > If you respin, please keep these sorted. Sure > > > > > #include "iommu-bits.h" > > #include "iommu.h" > > > > +static void riscv_iommu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) > > +{ > > + struct device *dev = msi_desc_to_dev(desc); > > + struct riscv_iommu_device *iommu = dev_get_drvdata(dev); > > + u16 idx = desc->msi_index; > > + u64 addr; > > + > > + addr = ((u64)msg->address_hi << 32) | msg->address_lo; > > + > > + if (addr != (addr & RISCV_IOMMU_MSI_CFG_TBL_ADDR)) > > + pr_warn_once("uh oh, the IOMMU can't send MSIs to 0x%llx, sending to 0x%llx instead\n", > > + addr, addr & RISCV_IOMMU_MSI_CFG_TBL_ADDR); > > Can this use dev_warn_once()? And should it really be only a warning? > Configuring the IOMMU to write to some other address seems dangerous. I guess > there's no clean way to handle this error, since this function cannot fail, and > irq_chip_compose_msi_msg() isn't supposed to fail either. I'll change it to a dev_err_once(). > > > + > > + addr &= RISCV_IOMMU_MSI_CFG_TBL_ADDR; > > + > > + riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_ADDR(idx), addr); > > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_DATA(idx), msg->data); > > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_CTRL(idx), 0); > > +} > > + > > static int riscv_iommu_platform_probe(struct platform_device *pdev) > > { > > + enum riscv_iommu_igs_settings igs; > > struct device *dev = &pdev->dev; > > struct riscv_iommu_device *iommu = NULL; > > struct resource *res = NULL; > > - int vec; > > + int vec, ret; > > > > iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL); > > if (!iommu) > > @@ -40,16 +63,6 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) > > iommu->caps = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_CAPABILITIES); > > iommu->fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL); > > > > - /* For now we only support WSI */ > > - switch (FIELD_GET(RISCV_IOMMU_CAPABILITIES_IGS, iommu->caps)) { > > - case RISCV_IOMMU_CAPABILITIES_IGS_WSI: > > - case RISCV_IOMMU_CAPABILITIES_IGS_BOTH: > > - break; > > - default: > > - return dev_err_probe(dev, -ENODEV, > > - "unable to use wire-signaled interrupts\n"); > > - } > > - > > iommu->irqs_count = platform_irq_count(pdev); > > if (iommu->irqs_count <= 0) > > return dev_err_probe(dev, -ENODEV, > > @@ -57,13 +70,60 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) > > if (iommu->irqs_count > RISCV_IOMMU_INTR_COUNT) > > iommu->irqs_count = RISCV_IOMMU_INTR_COUNT; > > > > - for (vec = 0; vec < iommu->irqs_count; vec++) > > - iommu->irqs[vec] = platform_get_irq(pdev, vec); > > + igs = FIELD_GET(RISCV_IOMMU_CAPABILITIES_IGS, iommu->caps); > > + switch (igs) { > > + case RISCV_IOMMU_CAPABILITIES_IGS_BOTH: > > + case RISCV_IOMMU_CAPABILITIES_IGS_MSI: > > + if (is_of_node(dev->fwnode)) > > + of_msi_configure(dev, to_of_node(dev->fwnode)); > > + > > + if (!dev_get_msi_domain(dev)) { > > + dev_warn(dev, "failed to find an MSI domain"); > > + goto msi_fail; > > + } > > + > > + ret = platform_device_msi_init_and_alloc_irqs(dev, iommu->irqs_count, > > + riscv_iommu_write_msi_msg); > > + if (ret) { > > + dev_warn(dev, "failed to allocate MSIs"); > > + goto msi_fail; > > + } > > + > > + for (vec = 0; vec < iommu->irqs_count; vec++) > > + iommu->irqs[vec] = msi_get_virq(dev, vec); > > + > > + /* Enable message-signaled interrupts, fctl.WSI */ > > + if (iommu->fctl & RISCV_IOMMU_FCTL_WSI) { > > + iommu->fctl ^= RISCV_IOMMU_FCTL_WSI; > > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); > > + } > > + > > + dev_info(dev, "using MSIs\n"); > > + break; > > + > > +msi_fail: > > + if (igs != RISCV_IOMMU_CAPABILITIES_IGS_BOTH) { > > + dev_warn(dev, "\n"); > > + return dev_err_probe(dev, -ENODEV, > > + "unable to use wire-signaled interrupts\n"); > > Is the dev_warn() just to call attention to the following error? There's no > guarantee that these two messages will be printed adjacently. I'll drop the dev_warn since it was supposed to tie in with the dev_warn above which was missing its endline on purpose, but your statement about avoiding split logs means I should probably just do a complete log above and complete logs here and... > > > + } > > + > > + dev_warn(dev, " - falling back to wired irqs\n"); > > No need for the extra hyphen here. ...here, which also means the hyphen should be dropped. > > Regards, > Samuel Thanks, drew > > > + fallthrough; > > > > - /* Enable wire-signaled interrupts, fctl.WSI */ > > - if (!(iommu->fctl & RISCV_IOMMU_FCTL_WSI)) { > > - iommu->fctl |= RISCV_IOMMU_FCTL_WSI; > > - riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); > > + case RISCV_IOMMU_CAPABILITIES_IGS_WSI: > > + for (vec = 0; vec < iommu->irqs_count; vec++) > > + iommu->irqs[vec] = platform_get_irq(pdev, vec); > > + > > + /* Enable wire-signaled interrupts, fctl.WSI */ > > + if (!(iommu->fctl & RISCV_IOMMU_FCTL_WSI)) { > > + iommu->fctl |= RISCV_IOMMU_FCTL_WSI; > > + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); > > + } > > + dev_info(dev, "using wire-signaled interrupts\n"); > > + break; > > + default: > > + return dev_err_probe(dev, -ENODEV, "invalid IGS\n"); > > } > > > > return riscv_iommu_init(iommu); > > @@ -71,7 +131,13 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) > > > > static void riscv_iommu_platform_remove(struct platform_device *pdev) > > { > > - riscv_iommu_remove(dev_get_drvdata(&pdev->dev)); > > + struct riscv_iommu_device *iommu = dev_get_drvdata(&pdev->dev); > > + bool msi = !(iommu->fctl & RISCV_IOMMU_FCTL_WSI); > > + > > + riscv_iommu_remove(iommu); > > + > > + if (msi) > > + platform_device_msi_free_irqs_all(&pdev->dev); > > }; > > > > static const struct of_device_id riscv_iommu_of_match[] = { >
diff --git a/drivers/iommu/riscv/iommu-platform.c b/drivers/iommu/riscv/iommu-platform.c index da336863f152..89aa622bcbde 100644 --- a/drivers/iommu/riscv/iommu-platform.c +++ b/drivers/iommu/riscv/iommu-platform.c @@ -11,18 +11,41 @@ */ #include <linux/kernel.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/msi.h> #include "iommu-bits.h" #include "iommu.h" +static void riscv_iommu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) +{ + struct device *dev = msi_desc_to_dev(desc); + struct riscv_iommu_device *iommu = dev_get_drvdata(dev); + u16 idx = desc->msi_index; + u64 addr; + + addr = ((u64)msg->address_hi << 32) | msg->address_lo; + + if (addr != (addr & RISCV_IOMMU_MSI_CFG_TBL_ADDR)) + pr_warn_once("uh oh, the IOMMU can't send MSIs to 0x%llx, sending to 0x%llx instead\n", + addr, addr & RISCV_IOMMU_MSI_CFG_TBL_ADDR); + + addr &= RISCV_IOMMU_MSI_CFG_TBL_ADDR; + + riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_ADDR(idx), addr); + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_DATA(idx), msg->data); + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_MSI_CFG_TBL_CTRL(idx), 0); +} + static int riscv_iommu_platform_probe(struct platform_device *pdev) { + enum riscv_iommu_igs_settings igs; struct device *dev = &pdev->dev; struct riscv_iommu_device *iommu = NULL; struct resource *res = NULL; - int vec; + int vec, ret; iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL); if (!iommu) @@ -40,16 +63,6 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) iommu->caps = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_CAPABILITIES); iommu->fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL); - /* For now we only support WSI */ - switch (FIELD_GET(RISCV_IOMMU_CAPABILITIES_IGS, iommu->caps)) { - case RISCV_IOMMU_CAPABILITIES_IGS_WSI: - case RISCV_IOMMU_CAPABILITIES_IGS_BOTH: - break; - default: - return dev_err_probe(dev, -ENODEV, - "unable to use wire-signaled interrupts\n"); - } - iommu->irqs_count = platform_irq_count(pdev); if (iommu->irqs_count <= 0) return dev_err_probe(dev, -ENODEV, @@ -57,13 +70,60 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) if (iommu->irqs_count > RISCV_IOMMU_INTR_COUNT) iommu->irqs_count = RISCV_IOMMU_INTR_COUNT; - for (vec = 0; vec < iommu->irqs_count; vec++) - iommu->irqs[vec] = platform_get_irq(pdev, vec); + igs = FIELD_GET(RISCV_IOMMU_CAPABILITIES_IGS, iommu->caps); + switch (igs) { + case RISCV_IOMMU_CAPABILITIES_IGS_BOTH: + case RISCV_IOMMU_CAPABILITIES_IGS_MSI: + if (is_of_node(dev->fwnode)) + of_msi_configure(dev, to_of_node(dev->fwnode)); + + if (!dev_get_msi_domain(dev)) { + dev_warn(dev, "failed to find an MSI domain"); + goto msi_fail; + } + + ret = platform_device_msi_init_and_alloc_irqs(dev, iommu->irqs_count, + riscv_iommu_write_msi_msg); + if (ret) { + dev_warn(dev, "failed to allocate MSIs"); + goto msi_fail; + } + + for (vec = 0; vec < iommu->irqs_count; vec++) + iommu->irqs[vec] = msi_get_virq(dev, vec); + + /* Enable message-signaled interrupts, fctl.WSI */ + if (iommu->fctl & RISCV_IOMMU_FCTL_WSI) { + iommu->fctl ^= RISCV_IOMMU_FCTL_WSI; + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); + } + + dev_info(dev, "using MSIs\n"); + break; + +msi_fail: + if (igs != RISCV_IOMMU_CAPABILITIES_IGS_BOTH) { + dev_warn(dev, "\n"); + return dev_err_probe(dev, -ENODEV, + "unable to use wire-signaled interrupts\n"); + } + + dev_warn(dev, " - falling back to wired irqs\n"); + fallthrough; - /* Enable wire-signaled interrupts, fctl.WSI */ - if (!(iommu->fctl & RISCV_IOMMU_FCTL_WSI)) { - iommu->fctl |= RISCV_IOMMU_FCTL_WSI; - riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); + case RISCV_IOMMU_CAPABILITIES_IGS_WSI: + for (vec = 0; vec < iommu->irqs_count; vec++) + iommu->irqs[vec] = platform_get_irq(pdev, vec); + + /* Enable wire-signaled interrupts, fctl.WSI */ + if (!(iommu->fctl & RISCV_IOMMU_FCTL_WSI)) { + iommu->fctl |= RISCV_IOMMU_FCTL_WSI; + riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl); + } + dev_info(dev, "using wire-signaled interrupts\n"); + break; + default: + return dev_err_probe(dev, -ENODEV, "invalid IGS\n"); } return riscv_iommu_init(iommu); @@ -71,7 +131,13 @@ static int riscv_iommu_platform_probe(struct platform_device *pdev) static void riscv_iommu_platform_remove(struct platform_device *pdev) { - riscv_iommu_remove(dev_get_drvdata(&pdev->dev)); + struct riscv_iommu_device *iommu = dev_get_drvdata(&pdev->dev); + bool msi = !(iommu->fctl & RISCV_IOMMU_FCTL_WSI); + + riscv_iommu_remove(iommu); + + if (msi) + platform_device_msi_free_irqs_all(&pdev->dev); }; static const struct of_device_id riscv_iommu_of_match[] = {
Apply platform_device_msi_init_and_alloc_irqs() to add support for MSIs when the IOMMU is a platform device. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> --- drivers/iommu/riscv/iommu-platform.c | 102 ++++++++++++++++++++++----- 1 file changed, 84 insertions(+), 18 deletions(-)