@@ -178,6 +178,19 @@ config POLARFIRE_SOC_MAILBOX
If unsure, say N.
+config MCHP_SBI_IPC_MBOX
+ tristate "Microchip Inter-processor Communication (IPC) SBI driver"
+ depends on RISCV_SBI || COMPILE_TEST
+ depends on ARCH_MICROCHIP
+ help
+ Mailbox implementation for Microchip devices with an
+ Inter-process communication (IPC) controller.
+
+ To compile this driver as a module, choose M here. the
+ module will be called mailbox-mchp-ipc-sbi.
+
+ If unsure, say N.
+
config QCOM_APCS_IPC
tristate "Qualcomm APCS IPC driver"
depends on ARCH_QCOM || COMPILE_TEST
@@ -45,6 +45,8 @@ obj-$(CONFIG_BCM_FLEXRM_MBOX) += bcm-flexrm-mailbox.o
obj-$(CONFIG_POLARFIRE_SOC_MAILBOX) += mailbox-mpfs.o
+obj-$(CONFIG_MCHP_SBI_IPC_MBOX) += mailbox-mchp-ipc-sbi.o
+
obj-$(CONFIG_QCOM_APCS_IPC) += qcom-apcs-ipc-mailbox.o
obj-$(CONFIG_TEGRA_HSP_MBOX) += tegra-hsp.o
new file mode 100644
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip Inter-Processor communication (IPC) driver
+ *
+ * Copyright (c) 2021 - 2024 Microchip Technology Inc. All rights reserved.
+ *
+ * Author: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mailbox/mchp-ipc.h>
+#include <asm/sbi.h>
+#include <asm/vendorid_list.h>
+
+#define IRQ_STATUS_BITS 12
+#define NUM_CHANS_PER_CLUSTER 5
+#define IPC_DMA_BIT_MASK 32
+#define SBI_EXT_MICROCHIP_TECHNOLOGY (SBI_EXT_VENDOR_START | \
+ MICROCHIP_VENDOR_ID)
+
+enum {
+ SBI_EXT_IPC_PROBE = 0x100,
+ SBI_EXT_IPC_CH_INIT,
+ SBI_EXT_IPC_SEND,
+ SBI_EXT_IPC_RECEIVE,
+ SBI_EXT_IPC_STATUS,
+};
+
+enum ipc_hw {
+ MIV_IHC,
+};
+
+/**
+ * struct mchp_ipc_mbox_info - IPC probe message format
+ *
+ * @hw_type: IPC implementation available in the hardware
+ * @num_channels: number of IPC channels available in the hardware
+ *
+ * Used to retrieve information on the IPC implementation
+ * using the SBI_EXT_IPC_PROBE SBI function id.
+ */
+struct mchp_ipc_mbox_info {
+ enum ipc_hw hw_type;
+ u8 num_channels;
+};
+
+/**
+ * struct mchp_ipc_init - IPC channel init message format
+ *
+ * @max_msg_size: maxmimum message size in bytes of a given channel
+ *
+ * struct used by the SBI_EXT_IPC_CH_INIT SBI function id to get
+ * the max message size in bytes of the initialized channel.
+ */
+struct mchp_ipc_init {
+ u16 max_msg_size;
+};
+
+/**
+ * struct mchp_ipc_status - IPC status message format
+ *
+ * @status: interrupt status for all channels associated to a cluster
+ * @cluster: specifies the cluster instance that originated an irq
+ *
+ * struct used by the SBI_EXT_IPC_STATUS SBI function id to get
+ * the message present and message clear interrupt status for all the
+ * channels associated to a cluster.
+ */
+struct mchp_ipc_status {
+ u32 status;
+ u8 cluster;
+};
+
+/**
+ * struct mchp_ipc_sbi_msg - IPC SBI payload message
+ *
+ * @buf_addr: physical address where the received data should be copied to
+ * @size: maximum size(in bytes) that can be stored in the buffer pointed to by `buf`
+ * @irq_type: mask representing the irq types that triggered an irq
+ *
+ * struct used by the SBI_EXT_IPC_SEND/SBI_EXT_IPC_RECEIVE SBI function
+ * ids to send/receive a message from an associated processor using
+ * the IPC.
+ */
+struct mchp_ipc_sbi_msg {
+ u64 buf_addr;
+ u16 size;
+ u8 irq_type;
+};
+
+struct mchp_ipc_cluster_cfg {
+ void *buf_base;
+ phys_addr_t buf_base_addr;
+ int irq;
+};
+
+struct mchp_ipc_sbi_mbox {
+ struct device *dev;
+ struct mbox_chan *chans;
+ struct mchp_ipc_cluster_cfg *cluster_cfg;
+ void *buf_base;
+ unsigned long buf_base_addr;
+ struct mbox_controller controller;
+ enum ipc_hw hw_type;
+};
+
+static int mchp_ipc_sbi_chan_send(u32 command, u32 channel, unsigned long address)
+{
+ struct sbiret ret;
+
+ ret = sbi_ecall(SBI_EXT_MICROCHIP_TECHNOLOGY, command, channel,
+ address, 0, 0, 0, 0);
+
+ if (ret.error)
+ return sbi_err_map_linux_errno(ret.error);
+ else
+ return ret.value;
+}
+
+static int mchp_ipc_sbi_send(u32 command, unsigned long address)
+{
+ struct sbiret ret;
+
+ ret = sbi_ecall(SBI_EXT_MICROCHIP_TECHNOLOGY, command, address,
+ 0, 0, 0, 0, 0);
+
+ if (ret.error)
+ return sbi_err_map_linux_errno(ret.error);
+ else
+ return ret.value;
+}
+
+static struct mchp_ipc_sbi_mbox *to_mchp_ipc_mbox(struct mbox_controller *mbox)
+{
+ return container_of(mbox, struct mchp_ipc_sbi_mbox, controller);
+}
+
+static inline void mchp_ipc_prepare_receive_req(struct mbox_chan *chan)
+{
+ struct mchp_ipc_sbi_chan *chan_info = (struct mchp_ipc_sbi_chan *)chan->con_priv;
+ struct mchp_ipc_sbi_msg request;
+
+ request.buf_addr = chan_info->msg_buf_rx_addr;
+ request.size = chan_info->max_msg_size;
+ memcpy(chan_info->buf_base_rx, &request, sizeof(struct mchp_ipc_sbi_msg));
+}
+
+static inline void mchp_ipc_process_received_data(struct mbox_chan *chan,
+ struct mchp_ipc_msg *ipc_msg)
+{
+ struct mchp_ipc_sbi_chan *chan_info = (struct mchp_ipc_sbi_chan *)chan->con_priv;
+ struct mchp_ipc_sbi_msg sbi_msg;
+
+ memcpy(&sbi_msg, chan_info->buf_base_rx, sizeof(struct mchp_ipc_sbi_msg));
+ ipc_msg->buf = (u32 *)chan_info->msg_buf_rx;
+ ipc_msg->size = sbi_msg.size;
+}
+
+static irqreturn_t mchp_ipc_cluster_aggr_isr(int irq, void *data)
+{
+ struct mbox_chan *chan;
+ struct mchp_ipc_sbi_chan *chan_info;
+ struct mchp_ipc_sbi_mbox *ipc = (struct mchp_ipc_sbi_mbox *)data;
+ struct mchp_ipc_msg ipc_msg;
+ struct mchp_ipc_status status_msg;
+ int ret;
+ unsigned long hartid;
+ u32 i, chan_index, chan_id;
+
+ /* Find out the hart that originated the irq */
+ for_each_online_cpu(i) {
+ hartid = cpuid_to_hartid_map(i);
+ if (irq == ipc->cluster_cfg[hartid].irq)
+ break;
+ }
+
+ status_msg.cluster = hartid;
+ memcpy(ipc->cluster_cfg[hartid].buf_base, &status_msg, sizeof(struct mchp_ipc_status));
+
+ ret = mchp_ipc_sbi_send(SBI_EXT_IPC_STATUS, ipc->cluster_cfg[hartid].buf_base_addr);
+ if (ret < 0) {
+ dev_err_ratelimited(ipc->dev, "could not get IHC irq status ret=%d\n", ret);
+ return IRQ_HANDLED;
+ }
+
+ memcpy(&status_msg, ipc->cluster_cfg[hartid].buf_base, sizeof(struct mchp_ipc_status));
+
+ /*
+ * Iterate over each bit set in the IHC interrupt status register (IRQ_STATUS) to identify
+ * the channel(s) that have a message to be processed/acknowledged.
+ * The bits are organized in alternating format, where each pair of bits represents
+ * the status of the message present and message clear interrupts for each cluster/hart
+ * (from hart 0 to hart 5). Each cluster can have up to 5 fixed channels associated.
+ */
+
+ for_each_set_bit(i, (unsigned long *)&status_msg.status, IRQ_STATUS_BITS) {
+ /* Find out the destination hart that triggered the interrupt */
+ chan_index = i / 2;
+
+ /*
+ * The IP has no loopback channels, so we need to decrement the index when
+ * the target hart has a greater index than our own
+ */
+ if (chan_index >= status_msg.cluster)
+ chan_index--;
+
+ /*
+ * Calculate the channel id given the hart and channel index. Channel IDs
+ * are unique across all clusters of an IPC, and iterate contiguously
+ * across all clusters.
+ */
+ chan_id = status_msg.cluster * (NUM_CHANS_PER_CLUSTER + chan_index);
+
+ chan = &ipc->chans[chan_id];
+ chan_info = (struct mchp_ipc_sbi_chan *)chan->con_priv;
+
+ if (i % 2 == 0) {
+ mchp_ipc_prepare_receive_req(chan);
+ ret = mchp_ipc_sbi_chan_send(SBI_EXT_IPC_RECEIVE, chan_id,
+ chan_info->buf_base_rx_addr);
+ if (ret < 0)
+ continue;
+
+ mchp_ipc_process_received_data(chan, &ipc_msg);
+ mbox_chan_received_data(&ipc->chans[chan_id], (void *)&ipc_msg);
+
+ } else {
+ ret = mchp_ipc_sbi_chan_send(SBI_EXT_IPC_RECEIVE, chan_id,
+ chan_info->buf_base_rx_addr);
+ mbox_chan_txdone(&ipc->chans[chan_id], ret);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static int mchp_ipc_send_data(struct mbox_chan *chan, void *data)
+{
+ struct mchp_ipc_sbi_chan *chan_info = (struct mchp_ipc_sbi_chan *)chan->con_priv;
+ const struct mchp_ipc_msg *msg = data;
+ struct mchp_ipc_sbi_msg sbi_payload;
+
+ memcpy(chan_info->msg_buf_tx, msg->buf, msg->size);
+ sbi_payload.buf_addr = chan_info->msg_buf_tx_addr;
+ sbi_payload.size = msg->size;
+ memcpy(chan_info->buf_base_tx, &sbi_payload, sizeof(sbi_payload));
+
+ return mchp_ipc_sbi_chan_send(SBI_EXT_IPC_SEND, chan_info->id, chan_info->buf_base_tx_addr);
+}
+
+static int mchp_ipc_startup(struct mbox_chan *chan)
+{
+ struct mchp_ipc_sbi_chan *chan_info = (struct mchp_ipc_sbi_chan *)chan->con_priv;
+ struct mchp_ipc_sbi_mbox *ipc = to_mchp_ipc_mbox(chan->mbox);
+ struct mchp_ipc_init ch_init_msg;
+ int ret;
+
+ /*
+ * The TX base buffer is used to transmit two types of messages:
+ * - struct mchp_ipc_init to initialize the channel
+ * - struct mchp_ipc_sbi_msg to transmit user data/payload
+ * Ensure the TX buffer size is large enough to accommodate either message type.
+ */
+ size_t max_size = max(sizeof(struct mchp_ipc_init), sizeof(struct mchp_ipc_sbi_msg));
+
+ chan_info->buf_base_tx = kmalloc(max_size, GFP_KERNEL);
+ if (!chan_info->buf_base_tx) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ chan_info->buf_base_tx_addr = __pa(chan_info->buf_base_tx);
+
+ chan_info->buf_base_rx = kmalloc(max_size, GFP_KERNEL);
+ if (!chan_info->buf_base_rx) {
+ ret = -ENOMEM;
+ goto fail_free_buf_base_tx;
+ }
+
+ chan_info->buf_base_rx_addr = __pa(chan_info->buf_base_rx);
+
+ ret = mchp_ipc_sbi_chan_send(SBI_EXT_IPC_CH_INIT, chan_info->id,
+ chan_info->buf_base_tx_addr);
+ if (ret < 0) {
+ dev_err(ipc->dev, "channel %u init failed\n", chan_info->id);
+ goto fail_free_buf_base_rx;
+ }
+
+ memcpy(&ch_init_msg, chan_info->buf_base_tx, sizeof(struct mchp_ipc_init));
+ chan_info->max_msg_size = ch_init_msg.max_msg_size;
+
+ chan_info->msg_buf_tx = kmalloc(chan_info->max_msg_size, GFP_KERNEL);
+ if (!chan_info->msg_buf_tx) {
+ ret = -ENOMEM;
+ goto fail_free_buf_base_rx;
+ }
+
+ chan_info->msg_buf_tx_addr = __pa(chan_info->msg_buf_tx);
+
+ chan_info->msg_buf_rx = kmalloc(chan_info->max_msg_size, GFP_KERNEL);
+ if (!chan_info->msg_buf_rx) {
+ ret = -ENOMEM;
+ goto fail_free_buf_msg_tx;
+ }
+
+ chan_info->msg_buf_rx_addr = __pa(chan_info->msg_buf_rx);
+
+ switch (ipc->hw_type) {
+ case MIV_IHC:
+ return 0;
+ default:
+ goto fail_free_buf_msg_rx;
+ }
+
+ if (ret) {
+ dev_err(ipc->dev, "failed to register interrupt(s)\n");
+ goto fail_free_buf_msg_rx;
+ }
+
+ return ret;
+
+fail_free_buf_msg_rx:
+ kfree(chan_info->msg_buf_rx);
+fail_free_buf_msg_tx:
+ kfree(chan_info->msg_buf_tx);
+fail_free_buf_base_rx:
+ kfree(chan_info->buf_base_rx);
+fail_free_buf_base_tx:
+ kfree(chan_info->buf_base_tx);
+fail:
+ return ret;
+}
+
+static void mchp_ipc_shutdown(struct mbox_chan *chan)
+{
+ struct mchp_ipc_sbi_chan *chan_info = (struct mchp_ipc_sbi_chan *)chan->con_priv;
+
+ kfree(chan_info->buf_base_tx);
+ kfree(chan_info->buf_base_rx);
+ kfree(chan_info->msg_buf_tx);
+ kfree(chan_info->msg_buf_rx);
+}
+
+static const struct mbox_chan_ops mchp_ipc_ops = {
+ .startup = mchp_ipc_startup,
+ .send_data = mchp_ipc_send_data,
+ .shutdown = mchp_ipc_shutdown,
+};
+
+static struct mbox_chan *mchp_ipc_mbox_xlate(struct mbox_controller *controller,
+ const struct of_phandle_args *spec)
+{
+ struct mchp_ipc_sbi_mbox *ipc = to_mchp_ipc_mbox(controller);
+ unsigned int chan_id = spec->args[0];
+
+ if (chan_id >= ipc->controller.num_chans) {
+ dev_err(ipc->dev, "invalid channel id %d\n", chan_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return &ipc->chans[chan_id];
+}
+
+static int mchp_ipc_get_cluster_aggr_irq(struct mchp_ipc_sbi_mbox *ipc)
+{
+ struct platform_device *pdev = to_platform_device(ipc->dev);
+ char *irq_name;
+ int cpuid, ret;
+ unsigned long hartid;
+ bool irq_found = false;
+
+ for_each_online_cpu(cpuid) {
+ hartid = cpuid_to_hartid_map(cpuid);
+ irq_name = devm_kasprintf(ipc->dev, GFP_KERNEL, "hart-%lu", hartid);
+ ret = platform_get_irq_byname_optional(pdev, irq_name);
+ if (ret <= 0)
+ continue;
+
+ ipc->cluster_cfg[hartid].irq = ret;
+ ret = devm_request_irq(ipc->dev, ipc->cluster_cfg[hartid].irq,
+ mchp_ipc_cluster_aggr_isr, IRQF_SHARED,
+ "miv-ihc-irq", ipc);
+ if (ret)
+ return ret;
+
+ ipc->cluster_cfg[hartid].buf_base = devm_kmalloc(ipc->dev,
+ sizeof(struct mchp_ipc_status),
+ GFP_KERNEL);
+
+ if (!ipc->cluster_cfg[hartid].buf_base)
+ return -ENOMEM;
+
+ ipc->cluster_cfg[hartid].buf_base_addr = __pa(ipc->cluster_cfg[hartid].buf_base);
+
+ irq_found = true;
+ }
+
+ return irq_found;
+}
+
+static int mchp_ipc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mchp_ipc_mbox_info ipc_info;
+ struct mchp_ipc_sbi_mbox *ipc;
+ struct mchp_ipc_sbi_chan *priv;
+ bool irq_avail = false;
+ int ret;
+ u32 chan_id;
+
+ ret = sbi_probe_extension(SBI_EXT_MICROCHIP_TECHNOLOGY);
+ if (ret <= 0)
+ return dev_err_probe(dev, ret, "Microchip SBI extension not detected\n");
+
+ ipc = devm_kzalloc(dev, sizeof(*ipc), GFP_KERNEL);
+ if (!ipc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ipc);
+
+ ipc->buf_base = devm_kmalloc(dev, sizeof(struct mchp_ipc_mbox_info), GFP_KERNEL);
+ if (!ipc->buf_base)
+ return -ENOMEM;
+
+ ipc->buf_base_addr = __pa(ipc->buf_base);
+
+ ret = mchp_ipc_sbi_send(SBI_EXT_IPC_PROBE, ipc->buf_base_addr);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "could not probe IPC SBI service\n");
+
+ memcpy(&ipc_info, ipc->buf_base, sizeof(struct mchp_ipc_mbox_info));
+ ipc->controller.num_chans = ipc_info.num_channels;
+ ipc->hw_type = ipc_info.hw_type;
+
+ ipc->chans = devm_kcalloc(dev, ipc->controller.num_chans, sizeof(*ipc->chans), GFP_KERNEL);
+ if (!ipc->chans)
+ return -ENOMEM;
+
+ ipc->dev = dev;
+ ipc->controller.txdone_irq = true;
+ ipc->controller.dev = ipc->dev;
+ ipc->controller.ops = &mchp_ipc_ops;
+ ipc->controller.chans = ipc->chans;
+ ipc->controller.of_xlate = mchp_ipc_mbox_xlate;
+
+ for (chan_id = 0; chan_id < ipc->controller.num_chans; chan_id++) {
+ priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ipc->chans[chan_id].con_priv = priv;
+ priv->id = chan_id;
+ }
+
+ if (ipc->hw_type == MIV_IHC) {
+ ipc->cluster_cfg = devm_kcalloc(dev, num_online_cpus(),
+ sizeof(struct mchp_ipc_cluster_cfg),
+ GFP_KERNEL);
+ if (!ipc->cluster_cfg)
+ return -ENOMEM;
+
+ if (mchp_ipc_get_cluster_aggr_irq(ipc))
+ irq_avail = true;
+ }
+
+ if (!irq_avail)
+ return dev_err_probe(dev, -ENODEV, "missing interrupt property\n");
+
+ ret = devm_mbox_controller_register(dev, &ipc->controller);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Inter-Processor communication (IPC) registration failed\n");
+
+ return 0;
+}
+
+static const struct of_device_id mchp_ipc_of_match[] = {
+ {.compatible = "microchip,sbi-ipc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mchp_ipc_of_match);
+
+static struct platform_driver mchp_ipc_driver = {
+ .driver = {
+ .name = "microchip_ipc",
+ .of_match_table = mchp_ipc_of_match,
+ },
+ .probe = mchp_ipc_probe,
+};
+
+module_platform_driver(mchp_ipc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Valentina Fernandez <valentina.fernandezalanis@microchip.com>");
+MODULE_DESCRIPTION("Microchip Inter-Processor Communication (IPC) driver");
new file mode 100644
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *Copyright (c) 2024 Microchip Technology Inc. All rights reserved.
+ */
+
+#ifndef _LINUX_MCHP_IPC_H_
+#define _LINUX_MCHP_IPC_H_
+
+#include <linux/mailbox_controller.h>
+#include <linux/types.h>
+
+struct mchp_ipc_msg {
+ u32 *buf;
+ u16 size;
+};
+
+struct mchp_ipc_sbi_chan {
+ void *buf_base_tx;
+ void *buf_base_rx;
+ void *msg_buf_tx;
+ void *msg_buf_rx;
+ phys_addr_t buf_base_tx_addr;
+ phys_addr_t buf_base_rx_addr;
+ phys_addr_t msg_buf_tx_addr;
+ phys_addr_t msg_buf_rx_addr;
+ int chan_aggregated_irq;
+ int mp_irq;
+ int mc_irq;
+ u32 id;
+ u32 max_msg_size;
+};
+
+#endif /* _LINUX_MCHP_IPC_H_ */
Add a mailbox controller driver for the Microchip Inter-processor Communication (IPC), which is used to send and receive data between processors. The driver uses the RISC-V Supervisor Binary Interface (SBI) to communicate with software running in machine mode (M-mode) to access the IPC hardware block. Additional details on the Microchip vendor extension and the IPC function IDs described in the driver can be found in the following documentation: https://github.com/linux4microchip/microchip-sbi-ecall-extension This SBI interface in this driver is compatible with the Mi-V Inter-hart Communication (IHC) IP. Transmitting and receiving data through the mailbox framework is done through struct mchp_ipc_msg. Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com> --- drivers/mailbox/Kconfig | 13 + drivers/mailbox/Makefile | 2 + drivers/mailbox/mailbox-mchp-ipc-sbi.c | 504 +++++++++++++++++++++++++ include/linux/mailbox/mchp-ipc.h | 33 ++ 4 files changed, 552 insertions(+) create mode 100644 drivers/mailbox/mailbox-mchp-ipc-sbi.c create mode 100644 include/linux/mailbox/mchp-ipc.h