diff mbox series

[v2,5/6] PCI: fu740: Add SiFive FU740 PCIe host controller driver

Message ID 27f491c113e1bb369d25aca02571b34422986142.1615954046.git.greentime.hu@sifive.com (mailing list archive)
State New, archived
Headers show
Series Add SiFive FU740 PCIe host controller driver support | expand

Commit Message

Greentime Hu March 18, 2021, 6:08 a.m. UTC
From: Paul Walmsley <paul.walmsley@sifive.com>

Add driver for the SiFive FU740 PCIe host controller.
This controller is based on the DesignWare PCIe core.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Co-developed-by: Henry Styles <hes@sifive.com>
Signed-off-by: Henry Styles <hes@sifive.com>
Co-developed-by: Erik Danie <erik.danie@sifive.com>
Signed-off-by: Erik Danie <erik.danie@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
---
 drivers/pci/controller/dwc/Kconfig      |   9 +
 drivers/pci/controller/dwc/Makefile     |   1 +
 drivers/pci/controller/dwc/pcie-fu740.c | 324 ++++++++++++++++++++++++
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-fu740.c

Comments

Krzysztof Wilczyński March 19, 2021, 4:37 a.m. UTC | #1
Hi,

[...]
> +static void fu740_phyregwrite(const uint8_t phy, const uint16_t addr,
> +			      const uint16_t wrdata, struct fu740_pcie *afp)
> +{
> +	struct device *dev = afp->pci.dev;
> +	void __iomem *phy_cr_para_addr;
> +	void __iomem *phy_cr_para_wr_data;
> +	void __iomem *phy_cr_para_wr_en;
> +	void __iomem *phy_cr_para_ack;
> +	int ret, val;
> +
> +	/* Setup */
> +	if (phy) {
> +		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ADDR;
> +		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_DATA;
> +		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_EN;
> +		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ACK;
> +	} else {
> +		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ADDR;
> +		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_DATA;
> +		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_EN;
> +		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ACK;
> +	}
> +
> +	writel_relaxed(addr, phy_cr_para_addr);
> +	writel_relaxed(wrdata, phy_cr_para_wr_data);
> +	writel_relaxed(1, phy_cr_para_wr_en);
> +
> +	/* Wait for wait_idle */
> +	ret = readl_poll_timeout(phy_cr_para_ack, val, val, 10, 5000);
> +	if (ret)
> +		dev_err(dev, "Wait for wait_ilde state failed!\n");

It would be "wait_idle" rather than "wait_idle".

[...]
> +	/* Wait for ~wait_idle */
> +	ret = readl_poll_timeout(phy_cr_para_ack, val, !val, 10, 5000);
> +	if (ret)
> +		dev_err(dev, "Wait for !wait_ilde state failed!\n");
[...]

Same as above, it would be "wait_idle" in the above.

> +static void fu740_pcie_ltssm_enable(struct device *dev)
> +{
> +	struct fu740_pcie *afp = dev_get_drvdata(dev);
> +
> +	/* Enable LTSSM */
> +	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
> +}
> +
> +static int fu740_pcie_start_link(struct dw_pcie *pci)
> +{
> +	struct device *dev = pci->dev;
> +
> +	/* Start LTSSM. */

Nitpick.  No need for a dot in this comment to keep it consistent with
the comment in the function above this one.

> +static int fu740_pcie_host_init(struct pcie_port *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct fu740_pcie *afp = to_fu740_pcie(pci);
> +	struct device *dev = pci->dev;
> +	int ret;
> +
> +	/* Power on reset */
> +	fu740_pcie_drive_perstn(afp);
> +
> +	/* Enable pcieauxclk */
> +	ret = clk_prepare_enable(afp->pcie_aux);
> +	if (ret)
> +		dev_err(dev, "unable to enable pcie_aux clock\n");
> +
> +	/*
> +	 * Assert hold_phy_rst (hold the controller LTSSM in reset after
> +	 * power_up_rst_n for register programming with cr_para)
> +	 */
> +	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
> +
> +	/* Deassert power_up_rst_n */
> +	ret = reset_control_deassert(afp->rst);
> +	if (ret)
> +		dev_err(dev, "unable to deassert pcie_power_up_rst_n\n");
> +
> +	fu740_pcie_init_phy(afp);
> +
> +	/* Disable pcieauxclk */
> +	clk_disable_unprepare(afp->pcie_aux);
> +	/* Clear hold_phy_rst */
> +	writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
> +	/* Enable pcieauxclk */
> +	ret = clk_prepare_enable(afp->pcie_aux);
> +	/* Set RC mode */
> +	writel_relaxed(0x4, afp->mgmt_base + PCIEX8MGMT_DEVICE_TYPE);
> +
> +	return 0;
> +}
[...]

It seems that the error handling is somewhat broken in the above
function, especially when you look at how the "ret" variables does not
seem to be used for anything once there was an error.

Krzysztof
Krzysztof Wilczyński March 19, 2021, 4:42 a.m. UTC | #2
Hi,

[...]
> > +	/* Wait for wait_idle */
> > +	ret = readl_poll_timeout(phy_cr_para_ack, val, val, 10, 5000);
> > +	if (ret)
> > +		dev_err(dev, "Wait for wait_ilde state failed!\n");
> 
> It would be "wait_idle" rather than "wait_idle".
[...]

Apologies, meant to say "wait_ilde" in the "rather than" part, but went
ahead and somehow used the correct spelling. :)

Krzysztof
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 22c5529e9a65..0a37d21ed64e 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -318,4 +318,13 @@  config PCIE_AL
 	  required only for DT-based platforms. ACPI platforms with the
 	  Annapurna Labs PCIe controller don't need to enable this.
 
+config PCIE_FU740
+	bool "SiFive FU740 PCIe host controller"
+	depends on PCI_MSI_IRQ_DOMAIN
+	depends on SOC_SIFIVE || COMPILE_TEST
+	select PCIE_DW_HOST
+	help
+	  Say Y here if you want PCIe controller support for the SiFive
+	  FU740.
+
 endmenu
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553fa0db..625f6aaeb5b8 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -5,6 +5,7 @@  obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
 obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
 obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
+obj-$(CONFIG_PCIE_FU740) += pcie-fu740.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
new file mode 100644
index 000000000000..65ca4c212fc3
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -0,0 +1,324 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FU740 DesignWare PCIe Controller integration
+ * Copyright (C) 2019-2021 SiFive, Inc.
+ * Paul Walmsley
+ * Greentime Hu
+ *
+ * Based in part on the i.MX6 PCIe host controller shim which is:
+ *
+ * Copyright (C) 2013 Kosagi
+ *		https://www.kosagi.com
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/reset.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#include "pcie-designware.h"
+
+#define to_fu740_pcie(x)	dev_get_drvdata((x)->dev)
+
+struct fu740_pcie {
+	struct dw_pcie pci;
+	void __iomem *mgmt_base;
+	struct gpio_desc *perstn;
+	struct gpio_desc *pwren;
+	struct clk *pcie_aux;
+	struct reset_control *rst;
+};
+
+#define SIFIVE_DEVICESRESETREG		0x28
+
+#define PCIEX8MGMT_PERST_N		0x0
+#define PCIEX8MGMT_APP_LTSSM_ENABLE	0x10
+#define PCIEX8MGMT_APP_HOLD_PHY_RST	0x18
+#define PCIEX8MGMT_DEVICE_TYPE		0x708
+#define PCIEX8MGMT_PHY0_CR_PARA_ADDR	0x860
+#define PCIEX8MGMT_PHY0_CR_PARA_RD_EN	0x870
+#define PCIEX8MGMT_PHY0_CR_PARA_RD_DATA	0x878
+#define PCIEX8MGMT_PHY0_CR_PARA_SEL	0x880
+#define PCIEX8MGMT_PHY0_CR_PARA_WR_DATA	0x888
+#define PCIEX8MGMT_PHY0_CR_PARA_WR_EN	0x890
+#define PCIEX8MGMT_PHY0_CR_PARA_ACK	0x898
+#define PCIEX8MGMT_PHY1_CR_PARA_ADDR	0x8a0
+#define PCIEX8MGMT_PHY1_CR_PARA_RD_EN	0x8b0
+#define PCIEX8MGMT_PHY1_CR_PARA_RD_DATA	0x8b8
+#define PCIEX8MGMT_PHY1_CR_PARA_SEL	0x8c0
+#define PCIEX8MGMT_PHY1_CR_PARA_WR_DATA	0x8c8
+#define PCIEX8MGMT_PHY1_CR_PARA_WR_EN	0x8d0
+#define PCIEX8MGMT_PHY1_CR_PARA_ACK	0x8d8
+
+#define PCIEX8MGMT_PHY_CDR_TRACK_EN	BIT(0)
+#define PCIEX8MGMT_PHY_LOS_THRSHLD	BIT(5)
+#define PCIEX8MGMT_PHY_TERM_EN		BIT(9)
+#define PCIEX8MGMT_PHY_TERM_ACDC	BIT(10)
+#define PCIEX8MGMT_PHY_EN		BIT(11)
+#define PCIEX8MGMT_PHY_INIT_VAL		(PCIEX8MGMT_PHY_CDR_TRACK_EN|\
+					 PCIEX8MGMT_PHY_LOS_THRSHLD|\
+					 PCIEX8MGMT_PHY_TERM_EN|\
+					 PCIEX8MGMT_PHY_TERM_ACDC|\
+					 PCIEX8MGMT_PHY_EN)
+
+#define PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3	0x1008
+#define PCIEX8MGMT_PHY_LANE_OFF		0x100
+#define PCIEX8MGMT_PHY_LANE0_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 0)
+#define PCIEX8MGMT_PHY_LANE1_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 1)
+#define PCIEX8MGMT_PHY_LANE2_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 2)
+#define PCIEX8MGMT_PHY_LANE3_BASE	(PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 3)
+
+static void fu740_pcie_assert_perstn(struct fu740_pcie *afp)
+{
+	/* Assert PERST_N GPIO */
+	gpiod_set_value_cansleep(afp->perstn, 0);
+	/* Assert controller PERST_N */
+	writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_PERST_N);
+}
+
+static void fu740_pcie_deassert_perstn(struct fu740_pcie *afp)
+{
+	/* Deassert controller PERST_N */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PERST_N);
+	/* Deassert PERST_N GPIO */
+	gpiod_set_value_cansleep(afp->perstn, 1);
+}
+
+static void fu740_pcie_power_on(struct fu740_pcie *afp)
+{
+	gpiod_set_value_cansleep(afp->pwren, 1);
+	/*
+	 * Ensure that PERST has been asserted for at least 100 ms.
+	 * Section 2.2 of PCI Express Card Electromechanical Specification
+	 * Revision 3.0
+	 */
+	msleep(100);
+}
+
+static void fu740_pcie_drive_perstn(struct fu740_pcie *afp)
+{
+	fu740_pcie_assert_perstn(afp);
+	fu740_pcie_power_on(afp);
+	fu740_pcie_deassert_perstn(afp);
+}
+
+static void fu740_phyregwrite(const uint8_t phy, const uint16_t addr,
+			      const uint16_t wrdata, struct fu740_pcie *afp)
+{
+	struct device *dev = afp->pci.dev;
+	void __iomem *phy_cr_para_addr;
+	void __iomem *phy_cr_para_wr_data;
+	void __iomem *phy_cr_para_wr_en;
+	void __iomem *phy_cr_para_ack;
+	int ret, val;
+
+	/* Setup */
+	if (phy) {
+		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ADDR;
+		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_DATA;
+		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_EN;
+		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ACK;
+	} else {
+		phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ADDR;
+		phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_DATA;
+		phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_EN;
+		phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ACK;
+	}
+
+	writel_relaxed(addr, phy_cr_para_addr);
+	writel_relaxed(wrdata, phy_cr_para_wr_data);
+	writel_relaxed(1, phy_cr_para_wr_en);
+
+	/* Wait for wait_idle */
+	ret = readl_poll_timeout(phy_cr_para_ack, val, val, 10, 5000);
+	if (ret)
+		dev_err(dev, "Wait for wait_ilde state failed!\n");
+
+	/* Clear */
+	writel_relaxed(0, phy_cr_para_wr_en);
+
+	/* Wait for ~wait_idle */
+	ret = readl_poll_timeout(phy_cr_para_ack, val, !val, 10, 5000);
+	if (ret)
+		dev_err(dev, "Wait for !wait_ilde state failed!\n");
+}
+
+static void fu740_pcie_init_phy(struct fu740_pcie *afp)
+{
+	/* Enable phy cr_para_sel interfaces */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_SEL);
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_SEL);
+
+	/*
+	 * Wait 10 cr_para cycles to guarantee that the registers are ready
+	 * to be edited.
+	 */
+	ndelay(10);
+
+	/* Set PHY AC termination mode */
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
+}
+
+static void fu740_pcie_ltssm_enable(struct device *dev)
+{
+	struct fu740_pcie *afp = dev_get_drvdata(dev);
+
+	/* Enable LTSSM */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
+}
+
+static int fu740_pcie_start_link(struct dw_pcie *pci)
+{
+	struct device *dev = pci->dev;
+
+	/* Start LTSSM. */
+	fu740_pcie_ltssm_enable(dev);
+	return 0;
+}
+
+static int fu740_pcie_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct fu740_pcie *afp = to_fu740_pcie(pci);
+	struct device *dev = pci->dev;
+	int ret;
+
+	/* Power on reset */
+	fu740_pcie_drive_perstn(afp);
+
+	/* Enable pcieauxclk */
+	ret = clk_prepare_enable(afp->pcie_aux);
+	if (ret)
+		dev_err(dev, "unable to enable pcie_aux clock\n");
+
+	/*
+	 * Assert hold_phy_rst (hold the controller LTSSM in reset after
+	 * power_up_rst_n for register programming with cr_para)
+	 */
+	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
+
+	/* Deassert power_up_rst_n */
+	ret = reset_control_deassert(afp->rst);
+	if (ret)
+		dev_err(dev, "unable to deassert pcie_power_up_rst_n\n");
+
+	fu740_pcie_init_phy(afp);
+
+	/* Disable pcieauxclk */
+	clk_disable_unprepare(afp->pcie_aux);
+	/* Clear hold_phy_rst */
+	writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
+	/* Enable pcieauxclk */
+	ret = clk_prepare_enable(afp->pcie_aux);
+	/* Set RC mode */
+	writel_relaxed(0x4, afp->mgmt_base + PCIEX8MGMT_DEVICE_TYPE);
+
+	return 0;
+}
+
+static const struct dw_pcie_host_ops fu740_pcie_host_ops = {
+	.host_init = fu740_pcie_host_init,
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = fu740_pcie_start_link,
+};
+
+static int fu740_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci;
+	struct fu740_pcie *afp;
+	int ret;
+
+	afp = devm_kzalloc(dev, sizeof(*afp), GFP_KERNEL);
+	if (!afp)
+		return -ENOMEM;
+	pci = &afp->pci;
+	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
+	pci->pp.ops = &fu740_pcie_host_ops;
+
+	/* SiFive specific region: mgmt */
+	afp->mgmt_base = devm_platform_ioremap_resource_byname(pdev, "mgmt");
+	if (IS_ERR(afp->mgmt_base))
+		return PTR_ERR(afp->mgmt_base);
+
+	/* Fetch GPIOs */
+	afp->perstn = devm_gpiod_get_optional(dev, "perstn-gpios", GPIOD_OUT_LOW);
+	if (IS_ERR(afp->perstn)) {
+		dev_err(dev, "unable to get perstn-gpios\n");
+		return ret;
+	}
+	afp->pwren = devm_gpiod_get_optional(dev, "pwren-gpios", GPIOD_OUT_LOW);
+	if (IS_ERR(afp->pwren)) {
+		dev_err(dev, "unable to get pwren-gpios\n");
+		return ret;
+	}
+
+	/* Fetch clocks */
+	afp->pcie_aux = devm_clk_get(dev, "pcie_aux");
+	if (IS_ERR(afp->pcie_aux))
+		return dev_err_probe(dev, PTR_ERR(afp->pcie_aux),
+					     "pcie_aux clock source missing or invalid\n");
+
+	/* Fetch reset */
+	afp->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(afp->rst))
+		return dev_err_probe(dev, PTR_ERR(afp->rst), "unable to get reset\n");
+
+	platform_set_drvdata(pdev, afp);
+
+	ret = dw_pcie_host_init(&pci->pp);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void fu740_pcie_shutdown(struct platform_device *pdev)
+{
+	struct fu740_pcie *afp = platform_get_drvdata(pdev);
+
+	/* Bring down link, so bootloader gets clean state in case of reboot */
+	fu740_pcie_assert_perstn(afp);
+}
+
+static const struct of_device_id fu740_pcie_of_match[] = {
+	{ .compatible = "sifive,fu740-pcie", },
+	{},
+};
+
+static struct platform_driver fu740_pcie_driver = {
+	.driver = {
+		   .name = "fu740-pcie",
+		   .of_match_table = fu740_pcie_of_match,
+		   .suppress_bind_attrs = true,
+	},
+	.probe = fu740_pcie_probe,
+	.shutdown = fu740_pcie_shutdown,
+};
+
+builtin_platform_driver(fu740_pcie_driver);