| Message ID | IA1PR20MB495302443F9B18EB1A0DDF65BB1B2@IA1PR20MB4953.namprd20.prod.outlook.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | riscv: sophgo: Add SG2042 external hardware monitor support | expand |
On Mon, 29 Apr 2024 08:56:34 +0800, Inochi Amaoto wrote: > Due to the design, Sophgo SG2042 use an external MCU to provide > hardware information, thermal information and reset control. > > Add bindings for this monitor device. > > Signed-off-by: Inochi Amaoto <inochiama@outlook.com> > --- > .../hwmon/sophgo,sg2042-hwmon-mcu.yaml | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/IA1PR20MB495302443F9B18EB1A0DDF65BB1B2@IA1PR20MB4953.namprd20.prod.outlook.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml b/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml new file mode 100644 index 000000000000..6a0383b7e3d2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 onboard MCU support + +maintainers: + - Inochi Amaoto <inochiama@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-hwmon-mcu + + reg: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + syscon@17 { + compatible = "sophgo,sg2042-hwmon-mcu"; + reg = <0x17>; + #thermal-sensor-cells = <1>; + }; + };
Due to the design, Sophgo SG2042 use an external MCU to provide hardware information, thermal information and reset control. Add bindings for this monitor device. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> --- .../hwmon/sophgo,sg2042-hwmon-mcu.yaml | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml -- 2.44.0