Message ID | IA1PR20MB495360B076BE4DA4E66B48BABBB32@IA1PR20MB4953.namprd20.prod.outlook.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Conor Dooley |
Headers | show |
Series | riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs | expand |
On 02/08/2024 10:32, Inochi Amaoto wrote: > The DMA IP of Sophgo CV18XX/SG200X is based on a DW AXI CORE, with > an additional channel remap register located in the top system control > area. The DMA channel is exclusive to each core. > > In addition, the DMA multiplexer is a subdevice of system controller, > so this binding only contains necessary properties for the multiplexer > itself. > > Add the dmamux binding for CV18XX/SG200X series SoC. > > Signed-off-by: Inochi Amaoto <inochiama@outlook.com> > --- > .../bindings/dma/sophgo,cv1800-dmamux.yaml | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml Filename should match compatible. > > diff --git a/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml > new file mode 100644 > index 000000000000..11a098ed138a > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/sophgo,cv1800-dmamux.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sophgo CV1800/SG200 Series DMA multiplexer > + > +maintainers: > + - Inochi Amaoto <inochiama@outlook.com> > + > +description: | Do not need '|' unless you need to preserve formatting. > + The DMA multiplexer of CV1800 is a subdevice of the system > + controller. It support mapping 8 channels, but each channel > + can be mapped only once. > + Best regards, Krzysztof
On Mon, Aug 05, 2024 at 07:32:17PM GMT, Krzysztof Kozlowski wrote: > On 02/08/2024 10:32, Inochi Amaoto wrote: > > The DMA IP of Sophgo CV18XX/SG200X is based on a DW AXI CORE, with > > an additional channel remap register located in the top system control > > area. The DMA channel is exclusive to each core. > > > > In addition, the DMA multiplexer is a subdevice of system controller, > > so this binding only contains necessary properties for the multiplexer > > itself. > > > > Add the dmamux binding for CV18XX/SG200X series SoC. > > > > Signed-off-by: Inochi Amaoto <inochiama@outlook.com> > > --- > > .../bindings/dma/sophgo,cv1800-dmamux.yaml | 51 +++++++++++++++++++ > > 1 file changed, 51 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml > > Filename should match compatible. > > > > > diff --git a/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml > > new file mode 100644 > > index 000000000000..11a098ed138a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml > > @@ -0,0 +1,51 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/dma/sophgo,cv1800-dmamux.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Sophgo CV1800/SG200 Series DMA multiplexer > > + > > +maintainers: > > + - Inochi Amaoto <inochiama@outlook.com> > > + > > +description: | > > Do not need '|' unless you need to preserve formatting. > > > + The DMA multiplexer of CV1800 is a subdevice of the system > > + controller. It support mapping 8 channels, but each channel > > + can be mapped only once. > > + > > > > Best regards, > Krzysztof > Thanks Regard, Inochi
diff --git a/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml new file mode 100644 index 000000000000..11a098ed138a --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/sophgo,cv1800-dmamux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo CV1800/SG200 Series DMA multiplexer + +maintainers: + - Inochi Amaoto <inochiama@outlook.com> + +description: | + The DMA multiplexer of CV1800 is a subdevice of the system + controller. It support mapping 8 channels, but each channel + can be mapped only once. + +allOf: + - $ref: dma-router.yaml# + +properties: + compatible: + const: sophgo,cv1800b-dmamux + + reg: + items: + - description: DMA channal remapping register + - description: DMA channel interrupt mapping register + + '#dma-cells': + const: 2 + description: + The first cells is device id. The second one is the cpu id. + + dma-masters: + maxItems: 1 + +required: + - reg + - '#dma-cells' + - dma-masters + +additionalProperties: false + +examples: + - | + dma-router@154 { + compatible = "sophgo,cv1800b-dmamux"; + reg = <0x154 0x8>, <0x298 0x4>; + #dma-cells = <2>; + dma-masters = <&dmac>; + };
The DMA IP of Sophgo CV18XX/SG200X is based on a DW AXI CORE, with an additional channel remap register located in the top system control area. The DMA channel is exclusive to each core. In addition, the DMA multiplexer is a subdevice of system controller, so this binding only contains necessary properties for the multiplexer itself. Add the dmamux binding for CV18XX/SG200X series SoC. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> --- .../bindings/dma/sophgo,cv1800-dmamux.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml -- 2.46.0