diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt
deleted file mode 100644
index adf7b7af5dc3..000000000000
--- a/Documentation/devicetree/bindings/riscv/cpus.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-===================
-RISC-V CPU Bindings
-===================
-
-The device tree allows to describe the layout of CPUs in a system through
-the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
-defining properties for every cpu.
-
-Bindings for CPU nodes follow the Devicetree Specification, available from:
-
-https://www.devicetree.org/specifications/
-
-with updates for 32-bit and 64-bit RISC-V systems provided in this document.
-
-===========
-Terminology
-===========
-
-This document uses some terminology common to the RISC-V community that is not
-widely used, the definitions of which are listed here:
-
-* hart: A hardware execution context, which contains all the state mandated by
-  the RISC-V ISA: a PC and some registers.  This terminology is designed to
-  disambiguate software's view of execution contexts from any particular
-  microarchitectural implementation strategy.  For example, my Intel laptop is
-  described as having one socket with two cores, each of which has two hyper
-  threads.  Therefore this system has four harts.
-
-=====================================
-cpus and cpu node bindings definition
-=====================================
-
-The RISC-V architecture, in accordance with the Devicetree Specification,
-requires the cpus and cpu nodes to be present and contain the properties
-described below.
-
-- cpus node
-
-        Description: Container of cpu nodes
-
-        The node name must be "cpus".
-
-        A cpus node must define the following properties:
-
-        - #address-cells
-                Usage: required
-                Value type: <u32>
-                Definition: must be set to 1
-        - #size-cells
-                Usage: required
-                Value type: <u32>
-                Definition: must be set to 0
-
-- cpu node
-
-        Description: Describes a hart context
-
-        PROPERTIES
-
-        - device_type
-                Usage: required
-                Value type: <string>
-                Definition: must be "cpu"
-        - reg
-                Usage: required
-                Value type: <u32>
-                Definition: The hart ID of this CPU node
-        - compatible:
-                Usage: required
-                Value type: <stringlist>
-                Definition: must contain "riscv", may contain one of
-                            "sifive,rocket0"
-        - mmu-type:
-                Usage: optional
-                Value type: <string>
-                Definition: Specifies the CPU's MMU type.  Possible values are
-                            "riscv,sv32"
-                            "riscv,sv39"
-                            "riscv,sv48"
-        - riscv,isa:
-                Usage: required
-                Value type: <string>
-                Definition: Contains the RISC-V ISA string of this hart.  These
-                            ISA strings are defined by the RISC-V ISA manual.
-
-Example: SiFive Freedom U540G Development Kit
----------------------------------------------
-
-This system contains two harts: a hart marked as disabled that's used for
-low-level system tasks and should be ignored by Linux, and a second hart that
-Linux is allowed to run on.
-
-        cpus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                timebase-frequency = <1000000>;
-                cpu@0 {
-                        clock-frequency = <1600000000>;
-                        compatible = "sifive,rocket0", "riscv";
-                        device_type = "cpu";
-                        i-cache-block-size = <64>;
-                        i-cache-sets = <128>;
-                        i-cache-size = <16384>;
-                        next-level-cache = <&L15 &L0>;
-                        reg = <0>;
-                        riscv,isa = "rv64imac";
-                        status = "disabled";
-                        L10: interrupt-controller {
-                                #interrupt-cells = <1>;
-                                compatible = "riscv,cpu-intc";
-                                interrupt-controller;
-                        };
-                };
-                cpu@1 {
-                        clock-frequency = <1600000000>;
-                        compatible = "sifive,rocket0", "riscv";
-                        d-cache-block-size = <64>;
-                        d-cache-sets = <64>;
-                        d-cache-size = <32768>;
-                        d-tlb-sets = <1>;
-                        d-tlb-size = <32>;
-                        device_type = "cpu";
-                        i-cache-block-size = <64>;
-                        i-cache-sets = <64>;
-                        i-cache-size = <32768>;
-                        i-tlb-sets = <1>;
-                        i-tlb-size = <32>;
-                        mmu-type = "riscv,sv39";
-                        next-level-cache = <&L15 &L0>;
-                        reg = <1>;
-                        riscv,isa = "rv64imafdc";
-                        status = "okay";
-                        tlb-split;
-                        L13: interrupt-controller {
-                                #interrupt-cells = <1>;
-                                compatible = "riscv,cpu-intc";
-                                interrupt-controller;
-                        };
-                };
-        };
-
-Example: Spike ISA Simulator with 1 Hart
-----------------------------------------
-
-This device tree matches the Spike ISA golden model as run with `spike -p1`.
-
-        cpus {
-                cpu@0 {
-                        device_type = "cpu";
-                        reg = <0x00000000>;
-                        status = "okay";
-                        compatible = "riscv";
-                        riscv,isa = "rv64imafdc";
-                        mmu-type = "riscv,sv48";
-                        clock-frequency = <0x3b9aca00>;
-                        interrupt-controller {
-                                #interrupt-cells = <0x00000001>;
-                                interrupt-controller;
-                                compatible = "riscv,cpu-intc";
-                        }
-                }
-        }
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index c899111aa5e3..5963af8c0c11 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -10,6 +10,18 @@ maintainers:
   - Paul Walmsley <paul.walmsley@sifive.com>
   - Palmer Dabbelt <palmer@sifive.com>
 
+description: |
+  This document uses some terminology common to the RISC-V community
+  that is not widely used, the definitions of which are listed here:
+
+  hart: A hardware execution context, which contains all the state
+  mandated by the RISC-V ISA: a PC and some registers.  This
+  terminology is designed to disambiguate software's view of execution
+  contexts from any particular microarchitectural implementation
+  strategy.  For example, an Intel laptop containing one socket with
+  two cores, each of which has two hyperthreads, could be described as
+  having four harts.
+
 properties:
   compatible:
     items:
