| Message ID | eb21847528a6487af54bb80f1ce94adff289cdb0.1722847198.git.unicorn_wang@outlook.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | mmc: sdhci-of-dwcmshc: Add Sophgo SG2042 support | expand |
On 5/08/24 12:19, Chen Wang wrote: > From: Chen Wang <unicorn_wang@outlook.com> > > Add support for the mmc controller of Sophgo SG2042. > > SG2042 uses Synopsys PHY the same as TH1520 so we reuse the tuning > logic from TH1520. Besides this, this patch implement some SG2042 > specific work, such as clocks and reset ops. > > Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/sdhci-of-dwcmshc.c | 125 ++++++++++++++++++++++++++-- > 1 file changed, 118 insertions(+), 7 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > index 16f420994519..ba8960d8b2d4 100644 > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > @@ -113,12 +113,15 @@ > #define DWC_MSHC_PTR_PHY_R 0x300 > > /* PHY general configuration */ > -#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) > -#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */ > -#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */ > -#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */ > -#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */ > -#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */ > +#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) > +#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */ > +#define PHY_CNFG_PHY_PWRGOOD_MASK BIT_MASK(1) /* bit [1] */ > +#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */ > +#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */ > +#define PHY_CNFG_PAD_SP_SG2042 0x09 /* PMOS TX drive strength for SG2042 */ > +#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */ > +#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */ > +#define PHY_CNFG_PAD_SN_SG2042 0x08 /* NMOS TX drive strength for SG2042 */ > > /* PHY command/response pad settings */ > #define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04) > @@ -147,10 +150,12 @@ > #define PHY_PAD_TXSLEW_CTRL_P 0x3 /* Slew control for P-Type pad TX */ > #define PHY_PAD_TXSLEW_CTRL_N_MASK GENMASK(12, 9) /* bits [12:9] */ > #define PHY_PAD_TXSLEW_CTRL_N 0x3 /* Slew control for N-Type pad TX */ > +#define PHY_PAD_TXSLEW_CTRL_N_SG2042 0x2 /* Slew control for N-Type pad TX for SG2042 */ > > /* PHY CLK delay line settings */ > #define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d) > -#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */ > +#define PHY_SDCLKDL_CNFG_EXTDLY_EN BIT(0) > +#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */ > > /* PHY CLK delay line delay code */ > #define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e) > @@ -158,10 +163,14 @@ > #define PHY_SDCLKDL_DC_DEFAULT 0x32 /* default delay code */ > #define PHY_SDCLKDL_DC_HS400 0x18 /* delay code for HS400 mode */ > > +#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20) > +#define PHY_SMPLDL_CNFG_BYPASS_EN BIT(1) > + > /* PHY drift_cclk_rx delay line configuration setting */ > #define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21) > #define PHY_ATDL_CNFG_INPSEL_MASK GENMASK(3, 2) /* bits [3:2] */ > #define PHY_ATDL_CNFG_INPSEL 0x3 /* delay line input source */ > +#define PHY_ATDL_CNFG_INPSEL_SG2042 0x2 /* delay line input source for SG2042 */ > > /* PHY DLL control settings */ > #define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24) > @@ -1013,6 +1022,85 @@ static int cv18xx_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) > return ret; > } > > +static inline void sg2042_sdhci_phy_init(struct sdhci_host *host) > +{ > + u32 val; > + > + /* Asset phy reset & set tx drive strength */ > + val = sdhci_readl(host, PHY_CNFG_R); > + val &= ~PHY_CNFG_RSTN_DEASSERT; > + val |= FIELD_PREP(PHY_CNFG_PHY_PWRGOOD_MASK, 1); > + val |= FIELD_PREP(PHY_CNFG_PAD_SP_MASK, PHY_CNFG_PAD_SP_SG2042); > + val |= FIELD_PREP(PHY_CNFG_PAD_SN_MASK, PHY_CNFG_PAD_SN_SG2042); > + sdhci_writel(host, val, PHY_CNFG_R); > + > + /* Configure phy pads */ > + val = PHY_PAD_RXSEL_3V3; > + val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLUP); > + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); > + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042); > + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); > + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); > + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); > + > + val = PHY_PAD_RXSEL_3V3; > + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); > + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042); > + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); > + > + val = PHY_PAD_RXSEL_3V3; > + val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLDOWN); > + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); > + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042); > + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); > + > + /* Configure delay line */ > + /* Enable fixed delay */ > + sdhci_writeb(host, PHY_SDCLKDL_CNFG_EXTDLY_EN, PHY_SDCLKDL_CNFG_R); > + /* > + * Set delay line. > + * Its recommended that bit UPDATE_DC[4] is 1 when SDCLKDL_DC is being written. > + * Ensure UPDATE_DC[4] is '0' when not updating code. > + */ > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > + val |= PHY_SDCLKDL_CNFG_UPDATE; > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > + /* Add 10 * 70ps = 0.7ns for output delay */ > + sdhci_writeb(host, 10, PHY_SDCLKDL_DC_R); > + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); > + val &= ~(PHY_SDCLKDL_CNFG_UPDATE); > + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); > + > + /* Set SMPLDL_CNFG, Bypass */ > + sdhci_writeb(host, PHY_SMPLDL_CNFG_BYPASS_EN, PHY_SMPLDL_CNFG_R); > + > + /* Set ATDL_CNFG, tuning clk not use for init */ > + val = FIELD_PREP(PHY_ATDL_CNFG_INPSEL_MASK, PHY_ATDL_CNFG_INPSEL_SG2042); > + sdhci_writeb(host, val, PHY_ATDL_CNFG_R); > + > + /* Deasset phy reset */ > + val = sdhci_readl(host, PHY_CNFG_R); > + val |= PHY_CNFG_RSTN_DEASSERT; > + sdhci_writel(host, val, PHY_CNFG_R); > +} > + > +static void sg2042_sdhci_reset(struct sdhci_host *host, u8 mask) > +{ > + sdhci_reset(host, mask); > + > + if (mask & SDHCI_RESET_ALL) > + sg2042_sdhci_phy_init(host); > +} > + > +static int sg2042_init(struct device *dev, struct sdhci_host *host, > + struct dwcmshc_priv *dwc_priv) > +{ > + static const char * const clk_ids[] = {"timer"}; > + > + return dwcmshc_get_enable_other_clks(mmc_dev(host->mmc), dwc_priv, > + ARRAY_SIZE(clk_ids), clk_ids); > +} > + > static const struct sdhci_ops sdhci_dwcmshc_ops = { > .set_clock = sdhci_set_clock, > .set_bus_width = sdhci_set_bus_width, > @@ -1054,6 +1142,16 @@ static const struct sdhci_ops sdhci_dwcmshc_cv18xx_ops = { > .platform_execute_tuning = cv18xx_sdhci_execute_tuning, > }; > > +static const struct sdhci_ops sdhci_dwcmshc_sg2042_ops = { > + .set_clock = sdhci_set_clock, > + .set_bus_width = sdhci_set_bus_width, > + .set_uhs_signaling = dwcmshc_set_uhs_signaling, > + .get_max_clock = dwcmshc_get_max_clock, > + .reset = sg2042_sdhci_reset, > + .adma_write_desc = dwcmshc_adma_write_desc, > + .platform_execute_tuning = th1520_execute_tuning, > +}; > + > static const struct dwcmshc_pltfm_data sdhci_dwcmshc_pdata = { > .pdata = { > .ops = &sdhci_dwcmshc_ops, > @@ -1102,6 +1200,15 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_cv18xx_pdata = { > }, > }; > > +static const struct dwcmshc_pltfm_data sdhci_dwcmshc_sg2042_pdata = { > + .pdata = { > + .ops = &sdhci_dwcmshc_sg2042_ops, > + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, > + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > + }, > + .init = sg2042_init, > +}; > + > static const struct cqhci_host_ops dwcmshc_cqhci_ops = { > .enable = dwcmshc_sdhci_cqe_enable, > .disable = sdhci_cqe_disable, > @@ -1194,6 +1301,10 @@ static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { > .compatible = "thead,th1520-dwcmshc", > .data = &sdhci_dwcmshc_th1520_pdata, > }, > + { > + .compatible = "sophgo,sg2042-dwcmshc", > + .data = &sdhci_dwcmshc_sg2042_pdata, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids);
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index 16f420994519..ba8960d8b2d4 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -113,12 +113,15 @@ #define DWC_MSHC_PTR_PHY_R 0x300 /* PHY general configuration */ -#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) -#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */ -#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */ -#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */ -#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */ -#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */ +#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00) +#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */ +#define PHY_CNFG_PHY_PWRGOOD_MASK BIT_MASK(1) /* bit [1] */ +#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */ +#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */ +#define PHY_CNFG_PAD_SP_SG2042 0x09 /* PMOS TX drive strength for SG2042 */ +#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */ +#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */ +#define PHY_CNFG_PAD_SN_SG2042 0x08 /* NMOS TX drive strength for SG2042 */ /* PHY command/response pad settings */ #define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04) @@ -147,10 +150,12 @@ #define PHY_PAD_TXSLEW_CTRL_P 0x3 /* Slew control for P-Type pad TX */ #define PHY_PAD_TXSLEW_CTRL_N_MASK GENMASK(12, 9) /* bits [12:9] */ #define PHY_PAD_TXSLEW_CTRL_N 0x3 /* Slew control for N-Type pad TX */ +#define PHY_PAD_TXSLEW_CTRL_N_SG2042 0x2 /* Slew control for N-Type pad TX for SG2042 */ /* PHY CLK delay line settings */ #define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d) -#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */ +#define PHY_SDCLKDL_CNFG_EXTDLY_EN BIT(0) +#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */ /* PHY CLK delay line delay code */ #define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e) @@ -158,10 +163,14 @@ #define PHY_SDCLKDL_DC_DEFAULT 0x32 /* default delay code */ #define PHY_SDCLKDL_DC_HS400 0x18 /* delay code for HS400 mode */ +#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20) +#define PHY_SMPLDL_CNFG_BYPASS_EN BIT(1) + /* PHY drift_cclk_rx delay line configuration setting */ #define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21) #define PHY_ATDL_CNFG_INPSEL_MASK GENMASK(3, 2) /* bits [3:2] */ #define PHY_ATDL_CNFG_INPSEL 0x3 /* delay line input source */ +#define PHY_ATDL_CNFG_INPSEL_SG2042 0x2 /* delay line input source for SG2042 */ /* PHY DLL control settings */ #define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24) @@ -1013,6 +1022,85 @@ static int cv18xx_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) return ret; } +static inline void sg2042_sdhci_phy_init(struct sdhci_host *host) +{ + u32 val; + + /* Asset phy reset & set tx drive strength */ + val = sdhci_readl(host, PHY_CNFG_R); + val &= ~PHY_CNFG_RSTN_DEASSERT; + val |= FIELD_PREP(PHY_CNFG_PHY_PWRGOOD_MASK, 1); + val |= FIELD_PREP(PHY_CNFG_PAD_SP_MASK, PHY_CNFG_PAD_SP_SG2042); + val |= FIELD_PREP(PHY_CNFG_PAD_SN_MASK, PHY_CNFG_PAD_SN_SG2042); + sdhci_writel(host, val, PHY_CNFG_R); + + /* Configure phy pads */ + val = PHY_PAD_RXSEL_3V3; + val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLUP); + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042); + sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); + sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); + sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); + + val = PHY_PAD_RXSEL_3V3; + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042); + sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); + + val = PHY_PAD_RXSEL_3V3; + val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLDOWN); + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); + val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042); + sdhci_writew(host, val, PHY_STBPAD_CNFG_R); + + /* Configure delay line */ + /* Enable fixed delay */ + sdhci_writeb(host, PHY_SDCLKDL_CNFG_EXTDLY_EN, PHY_SDCLKDL_CNFG_R); + /* + * Set delay line. + * Its recommended that bit UPDATE_DC[4] is 1 when SDCLKDL_DC is being written. + * Ensure UPDATE_DC[4] is '0' when not updating code. + */ + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); + val |= PHY_SDCLKDL_CNFG_UPDATE; + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); + /* Add 10 * 70ps = 0.7ns for output delay */ + sdhci_writeb(host, 10, PHY_SDCLKDL_DC_R); + val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); + val &= ~(PHY_SDCLKDL_CNFG_UPDATE); + sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); + + /* Set SMPLDL_CNFG, Bypass */ + sdhci_writeb(host, PHY_SMPLDL_CNFG_BYPASS_EN, PHY_SMPLDL_CNFG_R); + + /* Set ATDL_CNFG, tuning clk not use for init */ + val = FIELD_PREP(PHY_ATDL_CNFG_INPSEL_MASK, PHY_ATDL_CNFG_INPSEL_SG2042); + sdhci_writeb(host, val, PHY_ATDL_CNFG_R); + + /* Deasset phy reset */ + val = sdhci_readl(host, PHY_CNFG_R); + val |= PHY_CNFG_RSTN_DEASSERT; + sdhci_writel(host, val, PHY_CNFG_R); +} + +static void sg2042_sdhci_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + + if (mask & SDHCI_RESET_ALL) + sg2042_sdhci_phy_init(host); +} + +static int sg2042_init(struct device *dev, struct sdhci_host *host, + struct dwcmshc_priv *dwc_priv) +{ + static const char * const clk_ids[] = {"timer"}; + + return dwcmshc_get_enable_other_clks(mmc_dev(host->mmc), dwc_priv, + ARRAY_SIZE(clk_ids), clk_ids); +} + static const struct sdhci_ops sdhci_dwcmshc_ops = { .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, @@ -1054,6 +1142,16 @@ static const struct sdhci_ops sdhci_dwcmshc_cv18xx_ops = { .platform_execute_tuning = cv18xx_sdhci_execute_tuning, }; +static const struct sdhci_ops sdhci_dwcmshc_sg2042_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .set_uhs_signaling = dwcmshc_set_uhs_signaling, + .get_max_clock = dwcmshc_get_max_clock, + .reset = sg2042_sdhci_reset, + .adma_write_desc = dwcmshc_adma_write_desc, + .platform_execute_tuning = th1520_execute_tuning, +}; + static const struct dwcmshc_pltfm_data sdhci_dwcmshc_pdata = { .pdata = { .ops = &sdhci_dwcmshc_ops, @@ -1102,6 +1200,15 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_cv18xx_pdata = { }, }; +static const struct dwcmshc_pltfm_data sdhci_dwcmshc_sg2042_pdata = { + .pdata = { + .ops = &sdhci_dwcmshc_sg2042_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, + }, + .init = sg2042_init, +}; + static const struct cqhci_host_ops dwcmshc_cqhci_ops = { .enable = dwcmshc_sdhci_cqe_enable, .disable = sdhci_cqe_disable, @@ -1194,6 +1301,10 @@ static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { .compatible = "thead,th1520-dwcmshc", .data = &sdhci_dwcmshc_th1520_pdata, }, + { + .compatible = "sophgo,sg2042-dwcmshc", + .data = &sdhci_dwcmshc_sg2042_pdata, + }, {}, }; MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids);