[0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board

Message

Markus Reichl Jan. 6, 2020, 9:16 p.m. UTC

On rk3399-roc-pc board a voltage regulator MP8859 from Monolithic Power Systems
is used to supply the 12V power line. This delivers 5V as a default value after
boot. The voltage is controllable via I2C.
Add a basic driver to set and get the voltage of the MP8859 and add a matching
node with fixed 12V in the DT of the board. 

Markus Reichl (5):
  regulator: mp8859: add driver
  regulator: mp8859: add config option and build entry
  dt-bindings: add vendor Monolithic Power Systems
  dt-bindings: regulator: add MPS mp8859 voltage regulator
  arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc

 .../devicetree/bindings/regulator/mp8859.txt  |  22 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 .../boot/dts/rockchip/rk3399-roc-pc.dtsi      |  32 ++--
 drivers/regulator/Kconfig                     |  11 ++
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/mp8859.c                    | 156 ++++++++++++++++++
 6 files changed, 210 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/mp8859.txt
 create mode 100644 drivers/regulator/mp8859.c