| Message ID | 20200526033220.20047-1-frank.wang@rock-chips.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add Rockchip RK3399 USB3.0 Host support | expand |
On Tue, May 26, 2020 at 9:02 AM Frank Wang <frank.wang@rock-chips.com> wrote: > > This series add quirks for DWC3 and add Rockchip RK3399 USB3.0 host support. > > The function has been tested pass on rk3399-evb and roc-rk3399-pc board. > > For V6 update: > - Use [PATCH v6 04/16] instead of [PATCH v5 05/16] to fix that the current > Generic PHY subsystem is unable to find PHY if the PHY node is not part of > the root structure. > - Add 'Reviewed-by' tag for all patches except [PATCH v6 04/16]. > > For V5 update: > - Fix dwc3-generic driver followed Marek's comments for [PATCH v4 12/16]. > - Add 'Reviewed-by' and 'Tested-by' tag for [PATCH v4 07/16] and [PATCH v4 08/16]. > > For V4 update: > - Collect Jagan's all fixed patches [1]. > - Amend specific u-boot changes from dts to dtsi for [PATCH v3 6/7]. > > For V3 update: > - Fix compile error for [PATCH v2 1/9]. > - Use Jagan's Type-C driver instead of [PATCH v2 5/9]. > - Cleanup dts changes for [PATCH v2 7/9]. > - Cleanup config changes for [PATCH v2 8/9] and [PATCH v2 9/9]. > > For V2 update: > - Amend type-c driver followed Jagan's comments for [PATCH 5/8]. > - Fix dts commit for [PATCH 7/8]. > - Split RK3399 default config for [PATCH 8/8]. > - Add 'Reviewed-by' tag for [PATCH 1/8], [PATCH 2/8] and [PATCH 3/8]. > > [1] https://patchwork.ozlabs.org/project/uboot/cover/20200506075025.1677-1-jagan@amarulasolutions.com > > BR, > Frank > > Frank Wang (8): > arm: mach-rockchip: bind sub-nodes for rk3399_syscon > usb: dwc3: add dis_enblslpm_quirk > usb: dwc3: add dis_u2_freeclk_exists_quirk > usb: dwc3: amend UTMI/UTMIW phy interface setup > usb: dwc3: add make compatible for rockchip platform > driver: usb: drop legacy rockchip xhci driver > ARM: dts: rk3399-evb: usb3.0 host support > configs: evb-rk3399: update support usb3.0 host I have a new sandisk Type C and A storage disk. Here are the tests in roc-rk3399-pc. => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 2 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Mass Storage (480 Mb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... EHCI timed out on TD - token=0x80008d80 USB device not accepting new address (error=22) 2 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found => resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 3 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub [MTT] | +-3 Mass Storage (480 Mb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... EHCI timed out on TD - token=0x80008d80 USB device not accepting new address (error=22) 2 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 3 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub [MTT] | +-3 Mass Storage (480 Mb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller Jagan.
On 2020/5/26 上午11:32, Frank Wang wrote: > This series add quirks for DWC3 and add Rockchip RK3399 USB3.0 host support. > > The function has been tested pass on rk3399-evb and roc-rk3399-pc board. > > For V6 update: > - Use [PATCH v6 04/16] instead of [PATCH v5 05/16] to fix that the current > Generic PHY subsystem is unable to find PHY if the PHY node is not part of > the root structure. > - Add 'Reviewed-by' tag for all patches except [PATCH v6 04/16]. > > For V5 update: > - Fix dwc3-generic driver followed Marek's comments for [PATCH v4 12/16]. > - Add 'Reviewed-by' and 'Tested-by' tag for [PATCH v4 07/16] and [PATCH v4 08/16]. > > For V4 update: > - Collect Jagan's all fixed patches [1]. > - Amend specific u-boot changes from dts to dtsi for [PATCH v3 6/7]. > > For V3 update: > - Fix compile error for [PATCH v2 1/9]. > - Use Jagan's Type-C driver instead of [PATCH v2 5/9]. > - Cleanup dts changes for [PATCH v2 7/9]. > - Cleanup config changes for [PATCH v2 8/9] and [PATCH v2 9/9]. > > For V2 update: > - Amend type-c driver followed Jagan's comments for [PATCH 5/8]. > - Fix dts commit for [PATCH 7/8]. > - Split RK3399 default config for [PATCH 8/8]. > - Add 'Reviewed-by' tag for [PATCH 1/8], [PATCH 2/8] and [PATCH 3/8]. > > [1] https://patchwork.ozlabs.org/project/uboot/cover/20200506075025.1677-1-jagan@amarulasolutions.com > > BR, > Frank > > Frank Wang (8): > arm: mach-rockchip: bind sub-nodes for rk3399_syscon > usb: dwc3: add dis_enblslpm_quirk > usb: dwc3: add dis_u2_freeclk_exists_quirk > usb: dwc3: amend UTMI/UTMIW phy interface setup > usb: dwc3: add make compatible for rockchip platform > driver: usb: drop legacy rockchip xhci driver > ARM: dts: rk3399-evb: usb3.0 host support > configs: evb-rk3399: update support usb3.0 host > > Jagan Teki (8): > clk: rk3399: Enable/Disable the USB2PHY clk > clk: rk3399: Set empty for TCPHY assigned-clocks > clk: rk3399: Enable/Disable TCPHY clocks > phy: rockchip: Add Rockchip USB2PHY driver > phy: rockchip: Add Rockchip USB TypeC PHY driver > usb: dwc3: Add disable u2mac linestate check quirk > usb: dwc3: Enable AutoRetry feature in the controller > roc-rk3399-pc: Enable USB3.0 Host > > arch/arm/dts/rk3399-evb-u-boot.dtsi | 13 + > arch/arm/mach-rockchip/rk3399/syscon_rk3399.c | 3 + > configs/evb-rk3399_defconfig | 6 + > configs/roc-pc-mezzanine-rk3399_defconfig | 5 + > configs/roc-pc-rk3399_defconfig | 6 + > drivers/Makefile | 1 + > drivers/clk/rockchip/clk_rk3399.c | 38 + > drivers/phy/Kconfig | 1 + > drivers/phy/rockchip/Kconfig | 21 + > drivers/phy/rockchip/Makefile | 7 + > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 312 +++++++ > drivers/phy/rockchip/phy-rockchip-typec.c | 796 ++++++++++++++++++ > drivers/usb/common/common.c | 25 + > drivers/usb/dwc3/core.c | 106 ++- > drivers/usb/dwc3/core.h | 19 + > drivers/usb/dwc3/dwc3-generic.c | 33 +- > drivers/usb/host/Kconfig | 9 - > drivers/usb/host/Makefile | 1 - > drivers/usb/host/xhci-rockchip.c | 196 ----- > include/dwc3-uboot.h | 3 + > include/linux/usb/phy.h | 18 + > 21 files changed, 1376 insertions(+), 243 deletions(-) > create mode 100644 drivers/phy/rockchip/Kconfig > create mode 100644 drivers/phy/rockchip/Makefile > create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-usb2.c > create mode 100644 drivers/phy/rockchip/phy-rockchip-typec.c > delete mode 100644 drivers/usb/host/xhci-rockchip.c > Applied to u-boot-rockchip master. Thanks, - Kever