diff mbox

[v7,5/5] ARM: dts: enable Thermal on rk3288-evb board

Message ID 1411900693-30484-6-git-send-email-caesar.wang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Wang Caesar Sept. 28, 2014, 10:38 a.m. UTC 
when a thermal shutdown at 125C.Via GPIO give PMIC,
Reset the entire chip.

Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
---
 arch/arm/boot/dts/rk3288-evb.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Doug Anderson Oct. 3, 2014, 9:21 p.m. UTC | #1 
Caesar,

On Sun, Sep 28, 2014 at 3:38 AM, Caesar Wang <caesar.wang@rock-chips.com> wrote:
> when a thermal shutdown at 125C.Via GPIO give PMIC,
> Reset the entire chip.
>
> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
> ---
>  arch/arm/boot/dts/rk3288-evb.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
> index 2964370..a6872aa 100644
> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
> @@ -101,6 +101,11 @@
>         status = "okay";
>  };
>
> +&tsadc {
> +       reset-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;

I don't see "reset-gpios" mentioned in the bindings or the code.  I
think you can just remove this, right?

> +       status = "okay";
> +};
> +
>  &pinctrl {
>         buttons {
>                 pwrbtn: pwrbtn {
> --
> 1.9.1
>
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 2964370..a6872aa 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -101,6 +101,11 @@ 
 	status = "okay";
 };
 
+&tsadc {
+	reset-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
 &pinctrl {
 	buttons {
 		pwrbtn: pwrbtn {