diff mbox

[v3,6/6] ARM: dts: rockchip: add intmem node for rk3288 smp support

Message ID 1412976370-14468-7-git-send-email-kever.yang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kever Yang Oct. 10, 2014, 9:26 p.m. UTC
This patch add intmem node des which is needed by platsmp.c

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

Changes in v3:
- remove 'enable-method' from this patch
- add compitable name "rockchip,rk3288-pmu-sram" for pmu-intmem

Changes in v2:
- adjust the alignment

 arch/arm/boot/dts/rk3288.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

Heiko Stübner Oct. 11, 2014, 6:01 p.m. UTC | #1
Am Freitag, 10. Oktober 2014, 14:26:10 schrieb Kever Yang:
> This patch add intmem node des which is needed by platsmp.c
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

again without this Signed-off please (also true for patch 5/6 where I forgot to 
mention it)

> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> ---
> 
> Changes in v3:
> - remove 'enable-method' from this patch
> - add compitable name "rockchip,rk3288-pmu-sram" for pmu-intmem
> 
> Changes in v2:
> - adjust the alignment
> 
>  arch/arm/boot/dts/rk3288.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 44108fe..5e9c56d 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -441,6 +441,23 @@
>  		status = "disabled";
>  	};
> 
> +	bus_intmem@ff700000 {
> +		compatible = "mmio-sram";
> +		reg = <0xff700000 0x18000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0xff700000 0x18000>;
> +		smp-sram@0 {
> +			compatible = "rockchip,rk3066-smp-sram";
> +			reg = <0x00 0x10>;
> +		};
> +	};
> +
> +	pmu_intmem@ff720000 {
> +		compatible = "mmio-sram", "rockchip,rk3288-pmu-sram";

general rule, the more specific compatible should be in front, so
		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";

This way, if there is a driver for "rockchip,rk3288-pmu-sram" at some point in 
the future, it will grab the node before the more generic sram driver does.

But in general, what is the pmu sram necessary for, as no part of this series 
uses it?

> +		reg = <0xff720000 0x4000>;
> +	};
> +
>  	pmu: power-management@ff730000 {
>  		compatible = "rockchip,rk3066-pmu", "syscon";
>  		reg = <0xff730000 0x100>;
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 44108fe..5e9c56d 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -441,6 +441,23 @@ 
 		status = "disabled";
 	};
 
+	bus_intmem@ff700000 {
+		compatible = "mmio-sram";
+		reg = <0xff700000 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff700000 0x18000>;
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	pmu_intmem@ff720000 {
+		compatible = "mmio-sram", "rockchip,rk3288-pmu-sram";
+		reg = <0xff720000 0x4000>;
+	};
+
 	pmu: power-management@ff730000 {
 		compatible = "rockchip,rk3066-pmu", "syscon";
 		reg = <0xff730000 0x100>;