diff mbox

ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188

Message ID 1413208265-20372-1-git-send-email-julien.chauveau@neo-technologies.fr (mailing list archive)
State New, archived
Headers show

Commit Message

Julien CHAUVEAU Oct. 13, 2014, 1:51 p.m. UTC 
Add the I2S/PCM controller nodes and pin controls for rk3066 and rk3188.

Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr>
---
 arch/arm/boot/dts/rk3066a.dtsi | 51 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/rk3188.dtsi  | 16 +++++++++++++
 arch/arm/boot/dts/rk3xxx.dtsi  | 39 ++++++++++++++++++++++++++++++++
 3 files changed, 106 insertions(+)

Comments

Heiko Stübner Oct. 13, 2014, 11:18 p.m. UTC | #1 
Hi Julien,

Am Montag, 13. Oktober 2014, 15:51:04 schrieb Julien CHAUVEAU:
> Add the I2S/PCM controller nodes and pin controls for rk3066 and rk3188.
> 
> Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr>
> ---
>  arch/arm/boot/dts/rk3066a.dtsi | 51
> ++++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3188.dtsi  |
> 16 +++++++++++++
>  arch/arm/boot/dts/rk3xxx.dtsi  | 39 ++++++++++++++++++++++++++++++++
>  3 files changed, 106 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
> index ad9c2db..7c4cd86 100644
> --- a/arch/arm/boot/dts/rk3066a.dtsi
> +++ b/arch/arm/boot/dts/rk3066a.dtsi
> @@ -405,6 +405,42 @@
>  						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
>  			};
>  		};
> +
> +		i2s0 {
> +			i2s0_bus: i2s0-bus {
> +				rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
> +			};
> +		};
> +
> +		i2s1 {
> +			i2s1_bus: i2s1-bus {
> +				rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
> +			};
> +		};
> +
> +		i2s2 {
> +			i2s2_bus: i2s2-bus {
> +				rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
> +			};
> +		};
>  	};
>  };
> 
> @@ -473,6 +509,21 @@
>  	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
>  };
> 
> +&i2s0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s0_bus>;
> +};
> +
> +&i2s1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s1_bus>;
> +};
> +
> +&i2s2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s2_bus>;
> +};
> +
>  &uart0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&uart0_xfer>;
> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
> index ddaada7..04ef487 100644
> --- a/arch/arm/boot/dts/rk3188.dtsi
> +++ b/arch/arm/boot/dts/rk3188.dtsi
> @@ -395,6 +395,17 @@
>  						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
>  			};
>  		};
> +
> +		i2s1 {
> +			i2s1_bus: i2s1-bus {

rk3188 only has one i2s controller, so this should be i2s0

> +				rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +		};
>  	};
>  };
> 
> @@ -472,6 +483,11 @@
>  	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
>  };
> 
> +&i2s1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s1_bus>;
> +};
> +
>  &uart0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&uart0_xfer>;
> diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
> index 499468d..75b7982 100644
> --- a/arch/arm/boot/dts/rk3xxx.dtsi
> +++ b/arch/arm/boot/dts/rk3xxx.dtsi
> @@ -112,6 +112,45 @@
>  		      <0x1013c100 0x0100>;
>  	};
> 
> +	i2s0: i2s@10118000 {
> +		compatible = "rockchip,rk3066-i2s";
> +		reg = <0x10118000 0x2000>;
> +		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
> +		dma-names = "tx", "rx";
> +		clock-names = "i2s_hclk", "i2s_clk";
> +		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
> +		status = "disabled";
> +	};
> +
> +	i2s1: i2s@1011a000 {
> +		compatible = "rockchip,rk3066-i2s";
> +		reg = <0x1011a000 0x2000>;
> +		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
> +		dma-names = "tx", "rx";
> +		clock-names = "i2s_hclk", "i2s_clk";
> +		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
> +		status = "disabled";
> +	};
> +
> +	i2s2: i2s@1011c000 {
> +		compatible = "rockchip,rk3066-i2s";
> +		reg = <0x1011c000 0x2000>;
> +		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
> +		dma-names = "tx", "rx";
> +		clock-names = "i2s_hclk", "i2s_clk";
> +		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
> +		status = "disabled";
> +	};
> +

As stated above, rk3188 only has one i2s controller at all, so this block of 
the 3 i2s controllers should move to rk3066a.dtsi and rk3188.dtsi should get 
its own, like

+	i2s0: i2s@1011a000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		status = "disabled";
+	};

Especially as the clock for the one i2s controller of the rk3188 is of course 
labeled xCLK_I2S0.

Also, please sort device nodes by their address when adding them to the dtsi 
files.


Thanks
Heiko


>  	uart0: serial@10124000 {
>  		compatible = "snps,dw-apb-uart";
>  		reg = <0x10124000 0x400>;
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index ad9c2db..7c4cd86 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -405,6 +405,42 @@ 
 						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
 			};
 		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s2 {
+			i2s2_bus: i2s2-bus {
+				rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
 	};
 };
 
@@ -473,6 +509,21 @@ 
 	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
 };
 
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_bus>;
+};
+
+&i2s1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1_bus>;
+};
+
+&i2s2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s2_bus>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ddaada7..04ef487 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -395,6 +395,17 @@ 
 						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
 	};
 };
 
@@ -472,6 +483,11 @@ 
 	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
 };
 
+&i2s1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1_bus>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 499468d..75b7982 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -112,6 +112,45 @@ 
 		      <0x1013c100 0x0100>;
 	};
 
+	i2s0: i2s@10118000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x10118000 0x2000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@1011a000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@1011c000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011c000 0x2000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+		status = "disabled";
+	};
+
 	uart0: serial@10124000 {
 		compatible = "snps,dw-apb-uart";
 		reg = <0x10124000 0x400>;