diff mbox

[v12,3/3] ARM: dts: add rk3288 power-domain node

Message ID 1416217842-4716-4-git-send-email-caesar.wang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Wang Caesar Nov. 17, 2014, 9:50 a.m. UTC
This patch add the needed clocks into power-controller.

why need we do so that?

Firstly, we always be needed turn off clocks to save power when
the system enter suspend.So we need to enumerate the clocks are needed
to switch power doamin no and off.

Secondly, Rk3288 reset circuit should be syncchronous reset and
then sync revoked.so we need to enable clocks of all devices.

Signed-off-by: Jack Dai <jack.dai@rock-chips.com>
Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>

---

Changes in v12:
    - Remove essential clocks from rk3288 PD_VIO domain,
      Some clocks are essential for the system health and should not be
      turned down. However there is no owner for them so if they listed as
      belonging to power domain we'll try toggling them up and down during
      power domain transition. As a result we either fail to suspend or resume
      the system.

Changes in v11: None
Changes in v10:
    - fix missing the #include <dt-bindings/power-domain/rk3288.h>
    - remove the notes

Changes in v9:
    - add decription for power-doamin node

Changes in v8:
    - DTS go back to v2

Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
    - Decomposition power-controller, changed to multiple controller
    (gpu-power-controller, hevc-power-controller)

Changes in v2:
    - make pd_vio clocks all one entry per line and alphabetize.
    - power: power-controller move back to pinctrl: pinctrl.

 arch/arm/boot/dts/rk3288.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

Comments

Heiko Stübner Nov. 28, 2014, 8:57 a.m. UTC | #1
Hi Caesar,

Am Montag, 17. November 2014, 17:50:41 schrieb Caesar Wang:
> This patch add the needed clocks into power-controller.
> 
> why need we do so that?
> 
> Firstly, we always be needed turn off clocks to save power when
> the system enter suspend.So we need to enumerate the clocks are needed
> to switch power doamin no and off.
> 
> Secondly, Rk3288 reset circuit should be syncchronous reset and
> then sync revoked.so we need to enable clocks of all devices.
> 
> Signed-off-by: Jack Dai <jack.dai@rock-chips.com>
> Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
> 
> ---
> 
> Changes in v12:
>     - Remove essential clocks from rk3288 PD_VIO domain,
>       Some clocks are essential for the system health and should not be
>       turned down. However there is no owner for them so if they listed as
>       belonging to power domain we'll try toggling them up and down during
>       power domain transition. As a result we either fail to suspend or
> resume the system.
> 
> Changes in v11: None
> Changes in v10:
>     - fix missing the #include <dt-bindings/power-domain/rk3288.h>
>     - remove the notes
> 
> Changes in v9:
>     - add decription for power-doamin node
> 
> Changes in v8:
>     - DTS go back to v2
> 
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3:
>     - Decomposition power-controller, changed to multiple controller
>     (gpu-power-controller, hevc-power-controller)
> 
> Changes in v2:
>     - make pd_vio clocks all one entry per line and alphabetize.
>     - power: power-controller move back to pinctrl: pinctrl.
> 
>  arch/arm/boot/dts/rk3288.dtsi | 59
> +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59
> insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index cb18bb4..d9cd8c0 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -15,6 +15,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/pinctrl/rockchip.h>
>  #include <dt-bindings/clock/rk3288-cru.h>
> +#include <dt-bindings/power-domain/rk3288.h>
>  #include "skeleton.dtsi"
> 
>  / {
> @@ -989,4 +990,62 @@
>  			};
>  		};
>  	};
> +
> +	power: power-controller {
> +		compatible = "rockchip,rk3288-power-controller";
> +		#power-domain-cells = <1>;
> +		rockchip,pmu = <&pmu>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pd_gpu {
> +			reg = <RK3288_PD_GPU>;
> +			clocks = <&cru ACLK_GPU>;
> +		};
> +
> +		pd_hevc {
> +			reg = <RK3288_PD_HEVC>;
> +			clocks = <&cru ACLK_HEVC>,
> +				 <&cru SCLK_HEVC_CABAC>,
> +				 <&cru SCLK_HEVC_CORE>,
> +				 <&cru HCLK_HEVC>;
> +		};
> +
> +		pd_vio {
> +			reg = <RK3288_PD_VIO>;
> +			clocks = <&cru ACLK_IEP>,
> +				 <&cru ACLK_ISP>,
> +				 <&cru ACLK_RGA>,
> +				 <&cru ACLK_VIP>,
> +				 <&cru ACLK_VOP0>,
> +				 <&cru ACLK_VOP1>,
> +				 <&cru DCLK_VOP0>,
> +				 <&cru DCLK_VOP1>,
> +				 <&cru HCLK_IEP>,
> +				 <&cru HCLK_ISP>,
> +				 <&cru HCLK_RGA>,
> +				 <&cru HCLK_VIP>,
> +				 <&cru HCLK_VOP0>,
> +				 <&cru HCLK_VOP1>,
> +				 <&cru PCLK_EDP_CTRL>,
> +				 <&cru PCLK_HDMI_CTRL>,
> +				 <&cru PCLK_LVDS_PHY>,
> +				 <&cru PCLK_MIPI_CSI>,
> +				 <&cru PCLK_MIPI_DSI0>,
> +				 <&cru PCLK_MIPI_DSI1>,
> +				 <&cru SCLK_EDP_24M>,
> +				 <&cru SCLK_EDP>,
> +				 <&cru SCLK_HDMI_CEC>,
> +				 <&cru SCLK_HDMI_HDCP>,
> +				 <&cru SCLK_ISP_JPE>,
> +				 <&cru SCLK_ISP>,
> +				 <&cru SCLK_RGA>;
> +		};
> +
> +		pd_video {
> +			reg = <RK3288_PD_VIDEO>;
> +			clocks = <&cru ACLK_VCODEC>,
> +				 <&cru HCLK_VCODEC>;
> +		};
> +	};
>  };
Heiko Stübner Nov. 28, 2014, 9:01 a.m. UTC | #2
please ignore this and the previous mail - I accidentially hit a wrong button.

Sorry for the noise
Heiko

Am Freitag, 28. November 2014, 09:57:47 schrieb Heiko Stübner:
> Hi Caesar,
> 
> Am Montag, 17. November 2014, 17:50:41 schrieb Caesar Wang:
> > This patch add the needed clocks into power-controller.
> > 
> > why need we do so that?
> > 
> > Firstly, we always be needed turn off clocks to save power when
> > the system enter suspend.So we need to enumerate the clocks are needed
> > to switch power doamin no and off.
> > 
> > Secondly, Rk3288 reset circuit should be syncchronous reset and
> > then sync revoked.so we need to enable clocks of all devices.
> > 
> > Signed-off-by: Jack Dai <jack.dai@rock-chips.com>
> > Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
> > Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
> > 
> > ---
> > 
> > Changes in v12:
> >     - Remove essential clocks from rk3288 PD_VIO domain,
> >     
> >       Some clocks are essential for the system health and should not be
> >       turned down. However there is no owner for them so if they listed as
> >       belonging to power domain we'll try toggling them up and down during
> >       power domain transition. As a result we either fail to suspend or
> > 
> > resume the system.
> > 
> > Changes in v11: None
> > 
> > Changes in v10:
> >     - fix missing the #include <dt-bindings/power-domain/rk3288.h>
> >     - remove the notes
> > 
> > Changes in v9:
> >     - add decription for power-doamin node
> > 
> > Changes in v8:
> >     - DTS go back to v2
> > 
> > Changes in v7: None
> > Changes in v6: None
> > Changes in v5: None
> > Changes in v4: None
> > 
> > Changes in v3:
> >     - Decomposition power-controller, changed to multiple controller
> >     (gpu-power-controller, hevc-power-controller)
> > 
> > Changes in v2:
> >     - make pd_vio clocks all one entry per line and alphabetize.
> >     - power: power-controller move back to pinctrl: pinctrl.
> >  
> >  arch/arm/boot/dts/rk3288.dtsi | 59
> > 
> > +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59
> > insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> > index cb18bb4..d9cd8c0 100644
> > --- a/arch/arm/boot/dts/rk3288.dtsi
> > +++ b/arch/arm/boot/dts/rk3288.dtsi
> > @@ -15,6 +15,7 @@
> > 
> >  #include <dt-bindings/interrupt-controller/arm-gic.h>
> >  #include <dt-bindings/pinctrl/rockchip.h>
> >  #include <dt-bindings/clock/rk3288-cru.h>
> > 
> > +#include <dt-bindings/power-domain/rk3288.h>
> > 
> >  #include "skeleton.dtsi"
> >  
> >  / {
> > 
> > @@ -989,4 +990,62 @@
> > 
> >  			};
> >  		
> >  		};
> >  	
> >  	};
> > 
> > +
> > +	power: power-controller {
> > +		compatible = "rockchip,rk3288-power-controller";
> > +		#power-domain-cells = <1>;
> > +		rockchip,pmu = <&pmu>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		pd_gpu {
> > +			reg = <RK3288_PD_GPU>;
> > +			clocks = <&cru ACLK_GPU>;
> > +		};
> > +
> > +		pd_hevc {
> > +			reg = <RK3288_PD_HEVC>;
> > +			clocks = <&cru ACLK_HEVC>,
> > +				 <&cru SCLK_HEVC_CABAC>,
> > +				 <&cru SCLK_HEVC_CORE>,
> > +				 <&cru HCLK_HEVC>;
> > +		};
> > +
> > +		pd_vio {
> > +			reg = <RK3288_PD_VIO>;
> > +			clocks = <&cru ACLK_IEP>,
> > +				 <&cru ACLK_ISP>,
> > +				 <&cru ACLK_RGA>,
> > +				 <&cru ACLK_VIP>,
> > +				 <&cru ACLK_VOP0>,
> > +				 <&cru ACLK_VOP1>,
> > +				 <&cru DCLK_VOP0>,
> > +				 <&cru DCLK_VOP1>,
> > +				 <&cru HCLK_IEP>,
> > +				 <&cru HCLK_ISP>,
> > +				 <&cru HCLK_RGA>,
> > +				 <&cru HCLK_VIP>,
> > +				 <&cru HCLK_VOP0>,
> > +				 <&cru HCLK_VOP1>,
> > +				 <&cru PCLK_EDP_CTRL>,
> > +				 <&cru PCLK_HDMI_CTRL>,
> > +				 <&cru PCLK_LVDS_PHY>,
> > +				 <&cru PCLK_MIPI_CSI>,
> > +				 <&cru PCLK_MIPI_DSI0>,
> > +				 <&cru PCLK_MIPI_DSI1>,
> > +				 <&cru SCLK_EDP_24M>,
> > +				 <&cru SCLK_EDP>,
> > +				 <&cru SCLK_HDMI_CEC>,
> > +				 <&cru SCLK_HDMI_HDCP>,
> > +				 <&cru SCLK_ISP_JPE>,
> > +				 <&cru SCLK_ISP>,
> > +				 <&cru SCLK_RGA>;
> > +		};
> > +
> > +		pd_video {
> > +			reg = <RK3288_PD_VIDEO>;
> > +			clocks = <&cru ACLK_VCODEC>,
> > +				 <&cru HCLK_VCODEC>;
> > +		};
> > +	};
> > 
> >  };
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cb18bb4..d9cd8c0 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -15,6 +15,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/power-domain/rk3288.h>
 #include "skeleton.dtsi"
 
 / {
@@ -989,4 +990,62 @@ 
 			};
 		};
 	};
+
+	power: power-controller {
+		compatible = "rockchip,rk3288-power-controller";
+		#power-domain-cells = <1>;
+		rockchip,pmu = <&pmu>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pd_gpu {
+			reg = <RK3288_PD_GPU>;
+			clocks = <&cru ACLK_GPU>;
+		};
+
+		pd_hevc {
+			reg = <RK3288_PD_HEVC>;
+			clocks = <&cru ACLK_HEVC>,
+				 <&cru SCLK_HEVC_CABAC>,
+				 <&cru SCLK_HEVC_CORE>,
+				 <&cru HCLK_HEVC>;
+		};
+
+		pd_vio {
+			reg = <RK3288_PD_VIO>;
+			clocks = <&cru ACLK_IEP>,
+				 <&cru ACLK_ISP>,
+				 <&cru ACLK_RGA>,
+				 <&cru ACLK_VIP>,
+				 <&cru ACLK_VOP0>,
+				 <&cru ACLK_VOP1>,
+				 <&cru DCLK_VOP0>,
+				 <&cru DCLK_VOP1>,
+				 <&cru HCLK_IEP>,
+				 <&cru HCLK_ISP>,
+				 <&cru HCLK_RGA>,
+				 <&cru HCLK_VIP>,
+				 <&cru HCLK_VOP0>,
+				 <&cru HCLK_VOP1>,
+				 <&cru PCLK_EDP_CTRL>,
+				 <&cru PCLK_HDMI_CTRL>,
+				 <&cru PCLK_LVDS_PHY>,
+				 <&cru PCLK_MIPI_CSI>,
+				 <&cru PCLK_MIPI_DSI0>,
+				 <&cru PCLK_MIPI_DSI1>,
+				 <&cru SCLK_EDP_24M>,
+				 <&cru SCLK_EDP>,
+				 <&cru SCLK_HDMI_CEC>,
+				 <&cru SCLK_HDMI_HDCP>,
+				 <&cru SCLK_ISP_JPE>,
+				 <&cru SCLK_ISP>,
+				 <&cru SCLK_RGA>;
+		};
+
+		pd_video {
+			reg = <RK3288_PD_VIDEO>;
+			clocks = <&cru ACLK_VCODEC>,
+				 <&cru HCLK_VCODEC>;
+		};
+	};
 };