diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index f96c151..4748a8e 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1,6 +1,9 @@
 /*
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
  *
+ * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd
+ * Caesar Wang <wxt@rock-chips.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
@@ -75,8 +78,12 @@ struct rockchip_tsadc_chip {
 
 	/* Per-sensor methods */
 	int (*get_temp)(int chn, void __iomem *reg, int *temp);
-	void (*set_tshut_temp)(int chn, void __iomem *reg, long temp);
+	void (*set_tshut_value)(int chn, void __iomem *reg, u32 value);
 	void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
+
+	/* Per-table methods */
+	const struct tsadc_table *table;
+	int table_num;
 };
 
 struct rockchip_thermal_sensor {
@@ -102,7 +109,7 @@ struct rockchip_thermal_data {
 	enum tshut_polarity tshut_polarity;
 };
 
-/* TSADC V2 Sensor info define: */
+/* TSADC Sensor info define: */
 #define TSADCV2_AUTO_CON			0x04
 #define TSADCV2_INT_EN				0x08
 #define TSADCV2_INT_PD				0x0c
@@ -124,6 +131,8 @@ struct rockchip_thermal_data {
 #define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
 
 #define TSADCV2_DATA_MASK			0xfff
+#define TSADCV3_DATA_MASK			0x3ff
+
 #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT	4
 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT	4
 #define TSADCV2_AUTO_PERIOD_TIME		250 /* msec */
@@ -172,21 +181,62 @@ static const struct tsadc_table v2_code_table[] = {
 	{3421, 125000},
 };
 
-static u32 rk_tsadcv2_temp_to_code(long temp)
+static const struct tsadc_table v3_code_table[] = {
+	{0, -40000},
+	{106, -40000},
+	{108, -35000},
+	{110, -30000},
+	{112, -25000},
+	{114, -20000},
+	{116, -15000},
+	{118, -10000},
+	{120, -5000},
+	{122, 0},
+	{124, 5000},
+	{126, 10000},
+	{128, 15000},
+	{130, 20000},
+	{132, 25000},
+	{134, 30000},
+	{136, 35000},
+	{138, 40000},
+	{140, 45000},
+	{142, 50000},
+	{144, 55000},
+	{146, 60000},
+	{148, 65000},
+	{150, 70000},
+	{152, 75000},
+	{154, 80000},
+	{156, 85000},
+	{158, 90000},
+	{160, 95000},
+	{162, 100000},
+	{163, 105000},
+	{165, 110000},
+	{167, 115000},
+	{169, 120000},
+	{171, 125000},
+	{TSADCV3_DATA_MASK, 125000},
+};
+
+static u32 rk_tsadcv2_temp_to_code(const struct rockchip_tsadc_chip *chip,
+				   long temp)
 {
+	const struct tsadc_table *table = chip->table;
 	int high, low, mid;
 
 	low = 0;
-	high = ARRAY_SIZE(v2_code_table) - 1;
+	high = chip->table_num - 1;
 	mid = (high + low) / 2;
 
-	if (temp < v2_code_table[low].temp || temp > v2_code_table[high].temp)
+	if (temp < table[low].temp || temp > table[high].temp)
 		return 0;
 
 	while (low <= high) {
-		if (temp == v2_code_table[mid].temp)
-			return v2_code_table[mid].code;
-		else if (temp < v2_code_table[mid].temp)
+		if (temp == table[mid].temp)
+			return table[mid].code;
+		else if (temp < table[mid].temp)
 			high = mid - 1;
 		else
 			low = mid + 1;
@@ -235,16 +285,59 @@ static int rk_tsadcv2_code_to_temp(u32 code, int *temp)
 	return 0;
 }
 
+static int rk_tsadcv3_code_to_temp(u32 code, int *temp)
+{
+	unsigned int low = 1;
+	unsigned int high = ARRAY_SIZE(v3_code_table) - 1;
+	unsigned int mid = (low + high) / 2;
+	unsigned int num;
+	unsigned long denom;
+
+	BUILD_BUG_ON(ARRAY_SIZE(v3_code_table) < 2);
+
+	code &= TSADCV3_DATA_MASK;
+	if (code < v3_code_table[low].code)
+		return -EAGAIN;		/* Incorrect reading */
+
+	while (low <= high) {
+		if (code >= v3_code_table[mid - 1].code &&
+		    code < v3_code_table[mid].code)
+			break;
+		else if (code > v3_code_table[mid].code)
+			low = mid + 1;
+		else
+			high = mid - 1;
+		mid = (low + high) / 2;
+	}
+
+	/*
+	 * The 5C granularity provided by the table is too much. Let's
+	 * assume that the relationship between sensor readings and
+	 * temperature between 2 table entries is linear and interpolate
+	 * to produce less granular result.
+	 */
+	num = v3_code_table[mid].temp - v3_code_table[mid - 1].temp;
+	num *= code - v3_code_table[mid - 1].code;
+	denom = v3_code_table[mid].code - v3_code_table[mid - 1].code;
+	*temp = v3_code_table[mid - 1].temp + (num / denom);
+
+	return 0;
+}
+
 /**
- * rk_tsadcv2_initialize - initialize TASDC Controller
- * (1) Set TSADCV2_AUTO_PERIOD, configure the interleave between
- * every two accessing of TSADC in normal operation.
- * (2) Set TSADCV2_AUTO_PERIOD_HT, configure the interleave between
- * every two accessing of TSADC after the temperature is higher
- * than COM_SHUT or COM_INT.
- * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE,
- * if the temperature is higher than COMP_INT or COMP_SHUT for
- * "debounce" times, TSADC controller will generate interrupt or TSHUT.
+ * rk_tsadcv2_initialize - initialize TASDC Controller.
+ *
+ * (1) Set TSADC_V2_AUTO_PERIOD:
+ *     Configure the interleave between every two accessing of
+ *     TSADC in normal operation.
+ *
+ * (2) Set TSADCV2_AUTO_PERIOD_HT:
+ *     Configure the interleave between every two accessing of
+ *     TSADC after the temperature is higher than COM_SHUT or COM_INT.
+ *
+ * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE:
+ *     If the temperature is higher than COMP_INT or COMP_SHUT for
+ *     "debounce" times, TSADC controller will generate interrupt or TSHUT.
  */
 static void rk_tsadcv2_initialize(void __iomem *regs,
 				  enum tshut_polarity tshut_polarity)
@@ -286,6 +379,15 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable)
 	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
 }
 
+static int rk_tsadcv3_get_temp(int chn, void __iomem *regs, int *temp)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_DATA(chn));
+
+	return rk_tsadcv3_code_to_temp(val, temp);
+}
+
 static int rk_tsadcv2_get_temp(int chn, void __iomem *regs, int *temp)
 {
 	u32 val;
@@ -295,12 +397,11 @@ static int rk_tsadcv2_get_temp(int chn, void __iomem *regs, int *temp)
 	return rk_tsadcv2_code_to_temp(val, temp);
 }
 
-static void rk_tsadcv2_tshut_temp(int chn, void __iomem *regs, long temp)
+static void rk_tsadcv2_tshut_value(int chn, void __iomem *regs, u32 value)
 {
-	u32 tshut_value, val;
+	u32 val;
 
-	tshut_value = rk_tsadcv2_temp_to_code(temp);
-	writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
+	writel_relaxed(value, regs + TSADCV2_COMP_SHUT(chn));
 
 	/* TSHUT will be valid */
 	val = readl_relaxed(regs + TSADCV2_AUTO_CON);
@@ -337,8 +438,31 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 	.irq_ack = rk_tsadcv2_irq_ack,
 	.control = rk_tsadcv2_control,
 	.get_temp = rk_tsadcv2_get_temp,
-	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_value = rk_tsadcv2_tshut_value,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = v2_code_table,
+	.table_num = ARRAY_SIZE(v2_code_table),
+};
+
+static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv2_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv3_get_temp,
+	.set_tshut_value = rk_tsadcv2_tshut_value,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = v3_code_table,
+	.table_num = ARRAY_SIZE(v3_code_table),
 };
 
 static const struct of_device_id of_rockchip_thermal_match[] = {
@@ -346,6 +470,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
 		.compatible = "rockchip,rk3288-tsadc",
 		.data = (void *)&rk3288_tsadc_data,
 	},
+	{
+		.compatible = "rockchip,rk3368-tsadc",
+		.data = (void *)&rk3368_tsadc_data,
+	},
 	{ /* end */ },
 };
 MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
@@ -458,8 +586,10 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
 	const struct rockchip_tsadc_chip *tsadc = thermal->chip;
 	int error;
 
+	u32 tshut_value = rk_tsadcv2_temp_to_code(tsadc, thermal->tshut_temp);
+
 	tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
-	tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp);
+	tsadc->set_tshut_value(id, thermal->regs, tshut_value);
 
 	sensor->thermal = thermal;
 	sensor->id = id;
@@ -660,6 +790,9 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
 	int i;
 	int error;
 
+	u32 tshut_value = rk_tsadcv2_temp_to_code(thermal->chip,
+						  thermal->tshut_temp);
+
 	error = clk_enable(thermal->clk);
 	if (error)
 		return error;
@@ -677,8 +810,8 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
 
 		thermal->chip->set_tshut_mode(id, thermal->regs,
 					      thermal->tshut_mode);
-		thermal->chip->set_tshut_temp(id, thermal->regs,
-					      thermal->tshut_temp);
+		thermal->chip->set_tshut_value(id, thermal->regs,
+					       tshut_value);
 	}
 
 	thermal->chip->control(thermal->regs, true);
