| Message ID | 1449054741-25354-2-git-send-email-wxt@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 43949a6..2797f32 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -119,8 +119,8 @@ vdd_log: REG3 { regulator-name = "VDD_LOG"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; regulator-always-on; }; @@ -133,7 +133,7 @@ vccio_sd: REG5 { regulator-name = "VCCIO_SD"; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; };
In general, the logic voltage is affected by ddr frequency factors. We should fix the correct voltage range since assuemd that we have the ddr frequency driver in mainline. AFAIK, the 1.8v voltage is used by the SD3.0 card. Signed-off-by: Caesar Wang <wxt@rock-chips.com> --- arch/arm/boot/dts/rk3288-evb-act8846.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)