| Message ID | 1452596756-16617-1-git-send-email-zhangqing@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2016-01-12 20:05 GMT+09:00 zhangqing <zhangqing@rock-chips.com>: > Setting the set_suspend_enable/disable callback to support > enable and disable the dcdc when system is suspend. > > Signed-off-by: zhangqing <zhangqing@rock-chips.com> > --- > drivers/regulator/fan53555.c | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c > index 4940e82..2cb5cc3 100644 > --- a/drivers/regulator/fan53555.c > +++ b/drivers/regulator/fan53555.c > @@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) > return 0; > } > > +static int fan53555_set_suspend_enable(struct regulator_dev *rdev) > +{ > + struct fan53555_device_info *di = rdev_get_drvdata(rdev); > + > + return regmap_update_bits(di->regmap, di->sleep_reg, > + VSEL_BUCK_EN, VSEL_BUCK_EN); You are just writing the enable_mask (BTW, just use the enable_mask, not the value itself in such case) instead of enabling the suspend mode. In the disable callback you are just disabling the regulator. What do you want to achieve with these callbacks? Best regards, Krzysztof > +} > + > +static int fan53555_set_suspend_disable(struct regulator_dev *rdev) > +{ > + struct fan53555_device_info *di = rdev_get_drvdata(rdev); > + > + return regmap_update_bits(di->regmap, di->sleep_reg, > + VSEL_BUCK_EN, 0); > +} > + > static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) > { > struct fan53555_device_info *di = rdev_get_drvdata(rdev); > @@ -192,6 +208,8 @@ static struct regulator_ops fan53555_regulator_ops = { > .set_mode = fan53555_set_mode, > .get_mode = fan53555_get_mode, > .set_ramp_delay = fan53555_set_ramp, > + .set_suspend_enable = fan53555_set_suspend_enable, > + .set_suspend_disable = fan53555_set_suspend_disable, > }; > > static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) > -- > 1.9.1 > >
On 12.01.2016 23:28, zhangqing wrote: > > > On 01/11/2016 09:03 PM, Krzysztof Kozlowski wrote: >> 2016-01-12 20:05 GMT+09:00 zhangqing <zhangqing@rock-chips.com>: >>> Setting the set_suspend_enable/disable callback to support >>> enable and disable the dcdc when system is suspend. >>> >>> Signed-off-by: zhangqing <zhangqing@rock-chips.com> >>> --- >>> drivers/regulator/fan53555.c | 18 ++++++++++++++++++ >>> 1 file changed, 18 insertions(+) >>> >>> diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c >>> index 4940e82..2cb5cc3 100644 >>> --- a/drivers/regulator/fan53555.c >>> +++ b/drivers/regulator/fan53555.c >>> @@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct >>> regulator_dev *rdev, int uV) >>> return 0; >>> } >>> >>> +static int fan53555_set_suspend_enable(struct regulator_dev *rdev) >>> +{ >>> + struct fan53555_device_info *di = rdev_get_drvdata(rdev); >>> + >>> + return regmap_update_bits(di->regmap, di->sleep_reg, >>> + VSEL_BUCK_EN, VSEL_BUCK_EN); >> >> You are just writing the enable_mask (BTW, just use the enable_mask, >> not the value itself in such case) instead of enabling the suspend >> mode. In the disable callback you are just disabling the regulator. >> >> What do you want to achieve with these callbacks? > return regmap_update_bits(di->regmap, di->sleep_reg, > VSEL_BUCK_EN, VSEL_BUCK_EN); > This callback is setting sleep_reg, setting this dcdc output is enable > or disable when system enter sleep. > In our system this dcdc need disabled when sleep. But the current > software not support. > I missed that the register is different - sleep_reg instead of enable_reg. It makes sense and as this is separate register then usage of desc->enable_mask is up to you, I think. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof
On 01/11/2016 09:03 PM, Krzysztof Kozlowski wrote: > 2016-01-12 20:05 GMT+09:00 zhangqing <zhangqing@rock-chips.com>: >> Setting the set_suspend_enable/disable callback to support >> enable and disable the dcdc when system is suspend. >> >> Signed-off-by: zhangqing <zhangqing@rock-chips.com> >> --- >> drivers/regulator/fan53555.c | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c >> index 4940e82..2cb5cc3 100644 >> --- a/drivers/regulator/fan53555.c >> +++ b/drivers/regulator/fan53555.c >> @@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) >> return 0; >> } >> >> +static int fan53555_set_suspend_enable(struct regulator_dev *rdev) >> +{ >> + struct fan53555_device_info *di = rdev_get_drvdata(rdev); >> + >> + return regmap_update_bits(di->regmap, di->sleep_reg, >> + VSEL_BUCK_EN, VSEL_BUCK_EN); > > You are just writing the enable_mask (BTW, just use the enable_mask, > not the value itself in such case) instead of enabling the suspend > mode. In the disable callback you are just disabling the regulator. > > What do you want to achieve with these callbacks? return regmap_update_bits(di->regmap, di->sleep_reg, VSEL_BUCK_EN, VSEL_BUCK_EN); This callback is setting sleep_reg, setting this dcdc output is enable or disable when system enter sleep. In our system this dcdc need disabled when sleep. But the current software not support. > > Best regards, > Krzysztof > >> +} >> + >> +static int fan53555_set_suspend_disable(struct regulator_dev *rdev) >> +{ >> + struct fan53555_device_info *di = rdev_get_drvdata(rdev); >> + >> + return regmap_update_bits(di->regmap, di->sleep_reg, >> + VSEL_BUCK_EN, 0); >> +} >> + >> static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) >> { >> struct fan53555_device_info *di = rdev_get_drvdata(rdev); >> @@ -192,6 +208,8 @@ static struct regulator_ops fan53555_regulator_ops = { >> .set_mode = fan53555_set_mode, >> .get_mode = fan53555_get_mode, >> .set_ramp_delay = fan53555_set_ramp, >> + .set_suspend_enable = fan53555_set_suspend_enable, >> + .set_suspend_disable = fan53555_set_suspend_disable, >> }; >> >> static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) >> -- >> 1.9.1 >> >> > > >
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index 4940e82..2cb5cc3 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) return 0; } +static int fan53555_set_suspend_enable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, VSEL_BUCK_EN); +} + +static int fan53555_set_suspend_disable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, 0); +} + static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct fan53555_device_info *di = rdev_get_drvdata(rdev); @@ -192,6 +208,8 @@ static struct regulator_ops fan53555_regulator_ops = { .set_mode = fan53555_set_mode, .get_mode = fan53555_get_mode, .set_ramp_delay = fan53555_set_ramp, + .set_suspend_enable = fan53555_set_suspend_enable, + .set_suspend_disable = fan53555_set_suspend_disable, }; static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
Setting the set_suspend_enable/disable callback to support enable and disable the dcdc when system is suspend. Signed-off-by: zhangqing <zhangqing@rock-chips.com> --- drivers/regulator/fan53555.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)