From patchwork Thu May 12 07:53:00 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: David Wu X-Patchwork-Id: 9077101 Return-Path: X-Original-To: patchwork-linux-rockchip@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id ED7AEBF440 for ; Thu, 12 May 2016 07:54:01 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id D523A201F5 for ; Thu, 12 May 2016 07:54:00 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id C8F782014A for ; Thu, 12 May 2016 07:53:59 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1b0lRX-0007mv-Fb; Thu, 12 May 2016 07:53:59 +0000 Received: from lucky1.263xmail.com ([211.157.147.135]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1b0lR9-0007be-Ef; Thu, 12 May 2016 07:53:37 +0000 Received: from david.wu?rock-chips.com (unknown [192.168.167.158]) by lucky1.263xmail.com (Postfix) with SMTP id 4115D99B; Thu, 12 May 2016 15:53:12 +0800 (CST) X-263anti-spam: KSV:0; X-MAIL-GRAY: 1 X-MAIL-DELIVERY: 0 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-ADDR-CHECKED: 0 Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by smtp.263.net (Postfix) with ESMTP id A342731E60; Thu, 12 May 2016 15:53:06 +0800 (CST) X-RL-SENDER: david.wu@rock-chips.com X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: david.wu@rock-chips.com X-UNIQUE-TAG: <6ef55947f62a5661755cf77abf0c50df> X-ATTACHMENT-NUM: 0 X-SENDER: wdc@rock-chips.com X-DNS-TYPE: 0 Received: from unknown (unknown [58.22.7.114]) by smtp.263.net (Postfix) whith SMTP id 138004EP2C2; Thu, 12 May 2016 15:53:08 +0800 (CST) From: David Wu To: heiko@sntech.de, wsa@the-dreams.de Subject: [PATCH v9 2/8] i2c: rk3x: use struct "rk3x_i2c_calced_timings" Date: Thu, 12 May 2016 15:53:00 +0800 Message-Id: <1463039586-8134-3-git-send-email-david.wu@rock-chips.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1463039586-8134-1-git-send-email-david.wu@rock-chips.com> References: <1463039586-8134-1-git-send-email-david.wu@rock-chips.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20160512_005336_233133_9F378641 X-CRM114-Status: GOOD ( 13.46 ) X-Spam-Score: -1.9 (-) X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: mark.rutland@arm.com, huangtao@rock-chips.com, xjq@rock-chips.com, hl@rock-chips.com, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org, David Wu , dianders@chromium.org, linux-kernel@vger.kernel.org, cf@rock-chips.com, andy.shevchenko@gmail.com, robh+dt@kernel.org, linux-i2c@vger.kernel.org, galak@codeaurora.org, zyw@rock-chips.com, briannorris@google.com, davidriley@google.com, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+patchwork-linux-rockchip=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-5.6 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The "div_high" and "div_low" values are always used together. Group them into a structure to make it easier to pass them both around. This structure also provides a place for future calculated timings. Signed-off-by: David Wu Reviewed-by: Douglas Anderson --- Change in v9: - none Change in v8: - add commit description. drivers/i2c/busses/i2c-rk3x.c | 55 +++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 23 deletions(-) diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 7e45d51..1e2677a 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -75,6 +75,16 @@ enum { #define WAIT_TIMEOUT 1000 /* ms */ #define DEFAULT_SCL_RATE (100 * 1000) /* Hz */ +/** + * struct rk3x_i2c_calced_timings: + * @div_low: Divider output for low + * @div_high: Divider output for high + */ +struct rk3x_i2c_calced_timings { + unsigned long div_low; + unsigned long div_high; +}; + enum rk3x_i2c_state { STATE_IDLE, STATE_START, @@ -454,9 +464,8 @@ out: * Calculate divider values for desired SCL frequency * * @clk_rate: I2C input clock rate - * @t: Known I2C timing information. - * @div_low: Divider output for low - * @div_high: Divider output for high + * @t: Known I2C timing information + * @t_calc: Caculated rk3x private timings that would be written into regs * * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is @@ -464,8 +473,7 @@ out: */ static int rk3x_i2c_calc_divs(unsigned long clk_rate, struct i2c_timings *t, - unsigned long *div_low, - unsigned long *div_high) + struct rk3x_i2c_calced_timings *t_calc) { unsigned long spec_min_low_ns, spec_min_high_ns; unsigned long spec_setup_start, spec_max_data_hold_ns; @@ -572,8 +580,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, * Time needed to meet hold requirements is important. * Just use that. */ - *div_low = min_low_div; - *div_high = min_high_div; + t_calc->div_low = min_low_div; + t_calc->div_high = min_high_div; } else { /* * We've got to distribute some time among the low and high @@ -602,25 +610,25 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, /* Give low the "ideal" and give high whatever extra is left */ extra_low_div = ideal_low_div - min_low_div; - *div_low = ideal_low_div; - *div_high = min_high_div + (extra_div - extra_low_div); + t_calc->div_low = ideal_low_div; + t_calc->div_high = min_high_div + (extra_div - extra_low_div); } /* * Adjust to the fact that the hardware has an implicit "+1". * NOTE: Above calculations always produce div_low > 0 and div_high > 0. */ - *div_low = *div_low - 1; - *div_high = *div_high - 1; + t_calc->div_low--; + t_calc->div_high--; /* Maximum divider supported by hw is 0xffff */ - if (*div_low > 0xffff) { - *div_low = 0xffff; + if (t_calc->div_low > 0xffff) { + t_calc->div_low = 0xffff; ret = -EINVAL; } - if (*div_high > 0xffff) { - *div_high = 0xffff; + if (t_calc->div_high > 0xffff) { + t_calc->div_high = 0xffff; ret = -EINVAL; } @@ -630,19 +638,21 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) { struct i2c_timings *t = &i2c->t; - unsigned long div_low, div_high; + struct rk3x_i2c_calced_timings calc; u64 t_low_ns, t_high_ns; int ret; - ret = rk3x_i2c_calc_divs(clk_rate, t, &div_low, &div_high); + ret = rk3x_i2c_calc_divs(clk_rate, t, &calc); WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz); clk_enable(i2c->clk); - i2c_writel(i2c, (div_high << 16) | (div_low & 0xffff), REG_CLKDIV); + i2c_writel(i2c, (calc.div_high << 16) | (calc.div_low & 0xffff), + REG_CLKDIV); clk_disable(i2c->clk); - t_low_ns = div_u64(((u64)div_low + 1) * 8 * 1000000000, clk_rate); - t_high_ns = div_u64(((u64)div_high + 1) * 8 * 1000000000, clk_rate); + t_low_ns = div_u64(((u64)calc.div_low + 1) * 8 * 1000000000, clk_rate); + t_high_ns = div_u64(((u64)calc.div_high + 1) * 8 * 1000000000, + clk_rate); dev_dbg(i2c->dev, "CLK %lukhz, Req %uns, Act low %lluns high %lluns\n", clk_rate / 1000, @@ -672,12 +682,11 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long { struct clk_notifier_data *ndata = data; struct rk3x_i2c *i2c = container_of(nb, struct rk3x_i2c, clk_rate_nb); - unsigned long div_low, div_high; + struct rk3x_i2c_calced_timings calc; switch (event) { case PRE_RATE_CHANGE: - if (rk3x_i2c_calc_divs(ndata->new_rate, &i2c->t, - &div_low, &div_high) != 0) + if (rk3x_i2c_calc_divs(ndata->new_rate, &i2c->t, &calc) != 0) return NOTIFY_STOP; /* scale up */