| Message ID | 1465859076-4868-10-git-send-email-dianders@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
在 2016/6/14 7:04, Douglas Anderson 写道: > There's no reason to store the return value of rockchip_emmc_phy_power() > in a variable nor to check it. Just return it. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > Changes in v2: > - Move code cleanup before set phyctrl_frqsel based on card clock (Shawn) Looks good to me. Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> > > drivers/phy/phy-rockchip-emmc.c | 14 ++------------ > 1 file changed, 2 insertions(+), 12 deletions(-) > > diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c > index 2d059c046978..23fe50864526 100644 > --- a/drivers/phy/phy-rockchip-emmc.c > +++ b/drivers/phy/phy-rockchip-emmc.c > @@ -169,20 +169,14 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, > static int rockchip_emmc_phy_power_off(struct phy *phy) > { > struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); > - int ret = 0; > > /* Power down emmc phy analog blocks */ > - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); > - if (ret) > - return ret; > - > - return 0; > + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); > } > > static int rockchip_emmc_phy_power_on(struct phy *phy) > { > struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); > - int ret = 0; > > /* DLL operation: 200 MHz */ > regmap_write(rk_phy->reg_base, > @@ -213,11 +207,7 @@ static int rockchip_emmc_phy_power_on(struct phy *phy) > PHYCTRL_OTAPDLYSEL_SHIFT)); > > /* Power up emmc phy analog blocks */ > - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); > - if (ret) > - return ret; > - > - return 0; > + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); > } > > static const struct phy_ops ops = { >
On Tuesday 14 June 2016 04:34 AM, Douglas Anderson wrote: > There's no reason to store the return value of rockchip_emmc_phy_power() > in a variable nor to check it. Just return it. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > Changes in v2: > - Move code cleanup before set phyctrl_frqsel based on card clock (Shawn) > > drivers/phy/phy-rockchip-emmc.c | 14 ++------------ > 1 file changed, 2 insertions(+), 12 deletions(-) > > diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c > index 2d059c046978..23fe50864526 100644 > --- a/drivers/phy/phy-rockchip-emmc.c > +++ b/drivers/phy/phy-rockchip-emmc.c > @@ -169,20 +169,14 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, > static int rockchip_emmc_phy_power_off(struct phy *phy) > { > struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); > - int ret = 0; > > /* Power down emmc phy analog blocks */ > - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); > - if (ret) > - return ret; > - > - return 0; > + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); > } > > static int rockchip_emmc_phy_power_on(struct phy *phy) > { > struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); > - int ret = 0; > > /* DLL operation: 200 MHz */ > regmap_write(rk_phy->reg_base, > @@ -213,11 +207,7 @@ static int rockchip_emmc_phy_power_on(struct phy *phy) > PHYCTRL_OTAPDLYSEL_SHIFT)); > > /* Power up emmc phy analog blocks */ > - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); > - if (ret) > - return ret; > - > - return 0; > + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); > } > > static const struct phy_ops ops = { >
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c index 2d059c046978..23fe50864526 100644 --- a/drivers/phy/phy-rockchip-emmc.c +++ b/drivers/phy/phy-rockchip-emmc.c @@ -169,20 +169,14 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, static int rockchip_emmc_phy_power_off(struct phy *phy) { struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); - int ret = 0; /* Power down emmc phy analog blocks */ - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); - if (ret) - return ret; - - return 0; + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); } static int rockchip_emmc_phy_power_on(struct phy *phy) { struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); - int ret = 0; /* DLL operation: 200 MHz */ regmap_write(rk_phy->reg_base, @@ -213,11 +207,7 @@ static int rockchip_emmc_phy_power_on(struct phy *phy) PHYCTRL_OTAPDLYSEL_SHIFT)); /* Power up emmc phy analog blocks */ - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); - if (ret) - return ret; - - return 0; + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); } static const struct phy_ops ops = {
There's no reason to store the return value of rockchip_emmc_phy_power() in a variable nor to check it. Just return it. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v2: - Move code cleanup before set phyctrl_frqsel based on card clock (Shawn) drivers/phy/phy-rockchip-emmc.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)