@@ -340,7 +340,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
struct sti_pwm_compat_data *cdata;
struct sti_pwm_chip *pc;
struct resource *res;
- int ret;
+ int i, ret;
pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
if (!pc)
@@ -391,7 +391,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
return -EINVAL;
}
- ret = clk_prepare(pc->clk);
+ ret = clk_prepare_enable(pc->clk);
if (ret) {
dev_err(dev, "failed to prepare clock\n");
return ret;
@@ -409,6 +409,16 @@ static int sti_pwm_probe(struct platform_device *pdev)
return ret;
}
+ /*
+ * Keep the PWM clk enabled if some PWMs appear to be up and
+ * running.
+ */
+ for (i = 0; i < pc->chip.npwm; i++) {
+ if (pwm_is_enabled(&pc->chip.pwms[i]))
+ clk_enable(pc->clk);
+ }
+ clk_disable(pc->clk);
+
platform_set_drvdata(pdev, pc);
return 0;
The current logic will disable the PWM clk even if a PWM was left enabled by the bootloader (because it's controlling a critical device like a regulator for example). Keep the PWM clk enabled if at least one PWM is enabled to avoid any glitches. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/pwm/pwm-sti.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)