diff mbox

pwm: rockchip: State of pwm clock should synchronize with pwm enabled state

Message ID 1488264216-9361-1-git-send-email-david.wu@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

David Wu Feb. 28, 2017, 6:43 a.m. UTC
From: "david.wu" <david.wu@rock-chips.com>

If the pwm was not enabled at uboot loader, pwm could not work for clock
always disabled at pwm driver. The pwm clock is enabled at beginning of
pwm_apply(), but disabled at end of pwm_apply().

If the pwm was enabled at uboot loader, pwm clock is always enabled unless
closed by ATF. The pwm-backlight might turn off the power at early suspend,
should disable pwm clock for saving power consume.

It is important to provide opportunity to enable/disable clock at pwm driver,
the pwm consumer should ensure correct order to call pwm enable/disable, and
pwm driver ensure state of pwm clock synchronized with pwm enabled state.

Signed-off-by: David Wu <david.wu@rock-chips.com>
---
 drivers/pwm/pwm-rockchip.c | 38 +++++++++++++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 7 deletions(-)

Comments

Boris BREZILLON Feb. 28, 2017, 7:55 a.m. UTC | #1
Hi David,

On Tue, 28 Feb 2017 14:43:36 +0800
David Wu <david.wu@rock-chips.com> wrote:

> From: "david.wu" <david.wu@rock-chips.com>
> 
> If the pwm was not enabled at uboot loader, pwm could not work for clock
> always disabled at pwm driver. The pwm clock is enabled at beginning of
> pwm_apply(), but disabled at end of pwm_apply().
> 
> If the pwm was enabled at uboot loader, pwm clock is always enabled unless
> closed by ATF. The pwm-backlight might turn off the power at early suspend,
> should disable pwm clock for saving power consume.
> 
> It is important to provide opportunity to enable/disable clock at pwm driver,
> the pwm consumer should ensure correct order to call pwm enable/disable, and
> pwm driver ensure state of pwm clock synchronized with pwm enabled state.

Oops. It seems I'm the one who introduced this regression when moving
to the atomic PWM API.

You should add

Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
Cc: stable@vger.kernel.org

> 
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> ---
>  drivers/pwm/pwm-rockchip.c | 38 +++++++++++++++++++++++++++++++-------
>  1 file changed, 31 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
> index ef89df1..14a0445 100644
> --- a/drivers/pwm/pwm-rockchip.c
> +++ b/drivers/pwm/pwm-rockchip.c
> @@ -191,6 +191,26 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>  	return 0;
>  }
>  
> +static int rk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
> +			 bool enable, enum pwm_polarity polarity)

Please stay consistent with the existing naming scheme:

static int rockchip_pwm_enable(struct pwm_chip *chip,
			       struct pwm_device *pwm,
			       bool enable,
			       enum pwm_polarity polarity)

Once fixed, you can add

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> +{
> +	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> +	int ret;
> +
> +	if (enable) {
> +		ret = clk_enable(pc->clk);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	pc->data->set_enable(chip, pwm, enable, polarity);
> +
> +	if (!enable)
> +		clk_disable(pc->clk);
> +
> +	return 0;
> +}
> +
>  static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  			      struct pwm_state *state)
>  {
> @@ -207,22 +227,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  		return ret;
>  
>  	if (state->polarity != curstate.polarity && enabled) {
> -		pc->data->set_enable(chip, pwm, false, state->polarity);
> +		ret = rk_pwm_enable(chip, pwm, false, state->polarity);
> +		if (ret)
> +			goto out;
>  		enabled = false;
>  	}
>  
>  	ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
>  	if (ret) {
>  		if (enabled != curstate.enabled)
> -			pc->data->set_enable(chip, pwm, !enabled,
> -					     state->polarity);
> -
> +			rk_pwm_enable(chip, pwm, !enabled,
> +				      state->polarity);
>  		goto out;
>  	}
>  
> -	if (state->enabled != enabled)
> -		pc->data->set_enable(chip, pwm, state->enabled,
> -				     state->polarity);
> +	if (state->enabled != enabled) {
> +		ret = rk_pwm_enable(chip, pwm, state->enabled,
> +				    state->polarity);
> +		if (ret)
> +			goto out;
> +	}
>  
>  	/*
>  	 * Update the state with the real hardware, which can differ a bit
diff mbox

Patch

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index ef89df1..14a0445 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -191,6 +191,26 @@  static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+static int rk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
+			 bool enable, enum pwm_polarity polarity)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	int ret;
+
+	if (enable) {
+		ret = clk_enable(pc->clk);
+		if (ret)
+			return ret;
+	}
+
+	pc->data->set_enable(chip, pwm, enable, polarity);
+
+	if (!enable)
+		clk_disable(pc->clk);
+
+	return 0;
+}
+
 static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			      struct pwm_state *state)
 {
@@ -207,22 +227,26 @@  static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		return ret;
 
 	if (state->polarity != curstate.polarity && enabled) {
-		pc->data->set_enable(chip, pwm, false, state->polarity);
+		ret = rk_pwm_enable(chip, pwm, false, state->polarity);
+		if (ret)
+			goto out;
 		enabled = false;
 	}
 
 	ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
 	if (ret) {
 		if (enabled != curstate.enabled)
-			pc->data->set_enable(chip, pwm, !enabled,
-					     state->polarity);
-
+			rk_pwm_enable(chip, pwm, !enabled,
+				      state->polarity);
 		goto out;
 	}
 
-	if (state->enabled != enabled)
-		pc->data->set_enable(chip, pwm, state->enabled,
-				     state->polarity);
+	if (state->enabled != enabled) {
+		ret = rk_pwm_enable(chip, pwm, state->enabled,
+				    state->polarity);
+		if (ret)
+			goto out;
+	}
 
 	/*
 	 * Update the state with the real hardware, which can differ a bit