diff mbox

[v2,4/4] arm: dts: rk322x: update tsadc's frequence setting

Message ID 1495016177-2413-5-git-send-email-frank.wang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Frank Wang May 17, 2017, 10:16 a.m. UTC 
From: Rocky Hao <rocky.hao@rock-chips.com>

Update freq of tsadc's working clock as 32768 hz, if not set, tsadc
will work at a default frequence.

Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
 arch/arm/boot/dts/rk322x.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Comments

Heiko Stübner May 19, 2017, 11:29 a.m. UTC | #1 
Am Mittwoch, 17. Mai 2017, 18:16:17 CEST schrieb Frank Wang:
> From: Rocky Hao <rocky.hao@rock-chips.com>
> 
> Update freq of tsadc's working clock as 32768 hz, if not set, tsadc
> will work at a default frequence.
> 
> Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

applied for 4.13 after adapting the subject a bit


Thanks
Heiko
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 9a9da1f..c054e9e 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -434,6 +434,8 @@ 
 		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
 		clock-names = "tsadc", "apb_pclk";
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <32768>;
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		pinctrl-names = "init", "default", "sleep";