| Message ID | 1495777966-26212-1-git-send-email-eddie.cai.linux@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Eddie, 在 2017/5/26 13:52, Eddie Cai 写道: > firefly reload board not support sd card yet. so support it. It looks good overall, but I think you need to amend your commit title to say that you just add sd card support for rk3288-firefly-reload, otherwise, Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> > > Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> > --- > arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 31 +++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi > index 413b61f..2f41209 100644 > --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi > +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi > @@ -57,6 +57,17 @@ > clock-output-names = "ext_gmac"; > }; > > + vcc_sd: sdmmc-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_pwr>; > + regulator-name = "vcc_sd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <100000>; > + vin-supply = <&vcc_io>; > + }; > > vcc_flash: flash-regulator { > compatible = "regulator-fixed"; > @@ -281,6 +292,26 @@ > rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; > }; > }; > + > + sdmmc { > + sdmmc_pwr: sdmmc-pwr { > + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + disable-wp; > + num-slots = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; > + vmmc-supply = <&vcc_sd>; > + vqmmc-supply = <&vccio_sd>; > + status = "okay"; > }; > > &tsadc { >
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 413b61f..2f41209 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -57,6 +57,17 @@ clock-output-names = "ext_gmac"; }; + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; vcc_flash: flash-regulator { compatible = "regulator-fixed"; @@ -281,6 +292,26 @@ rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; }; }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; }; &tsadc {
firefly reload board not support sd card yet. so support it. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> --- arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+)