@@ -172,6 +172,8 @@ struct rockchip_usb2phy_cfg {
* @vbus_attached: otg device vbus status.
* @bvalid_irq: IRQ number assigned for vbus valid rise detection.
* @ls_irq: IRQ number assigned for linestate detection.
+ * @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate
+ * irqs to one irq in otg-port.
* @mutex: for register updating in sm_work.
* @chg_work: charge detect work.
* @otg_sm_work: OTG state machine work.
@@ -189,6 +191,7 @@ struct rockchip_usb2phy_port {
bool vbus_attached;
int bvalid_irq;
int ls_irq;
+ int otg_mux_irq;
struct mutex mutex;
struct delayed_work chg_work;
struct delayed_work otg_sm_work;
@@ -934,6 +937,17 @@ static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
+ return rockchip_usb2phy_bvalid_irq(irq, data);
+ else
+ return IRQ_NONE;
+}
+
static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
struct rockchip_usb2phy_port *rport,
struct device_node *child_np)
@@ -1010,20 +1024,43 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
rport->utmi_avalid =
of_property_read_bool(child_np, "rockchip,utmi-avalid");
- rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
- if (rport->bvalid_irq < 0) {
- dev_err(rphy->dev, "no vbus valid irq provided\n");
- ret = rport->bvalid_irq;
- goto out;
- }
+ /*
+ * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
+ * interrupts muxed together, so probe the otg-mux interrupt first,
+ * if not found, then look for the regular interrupts one by one.
+ */
+ rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
+ if (rport->otg_mux_irq > 0) {
+ ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
+ NULL,
+ rockchip_usb2phy_otg_mux_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_otg",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-mux irq handle\n");
+ goto out;
+ }
+ } else {
+ rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+ if (rport->bvalid_irq < 0) {
+ dev_err(rphy->dev, "no vbus valid irq provided\n");
+ ret = rport->bvalid_irq;
+ goto out;
+ }
- ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL,
- rockchip_usb2phy_bvalid_irq,
- IRQF_ONESHOT,
- "rockchip_usb2phy_bvalid", rport);
- if (ret) {
- dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n");
- goto out;
+ ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
+ NULL,
+ rockchip_usb2phy_bvalid_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_bvalid",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-bvalid irq handle\n");
+ goto out;
+ }
}
if (!IS_ERR(rphy->edev)) {
The otg-id/otg-bvalid/linestate interrupts are multiplexed together in otg-port on some Rockchip SoC (e.g RV1108), this patch add support for it. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 63 +++++++++++++++++++++------ 1 file changed, 50 insertions(+), 13 deletions(-)