| Message ID | 20191213084748.11210-5-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for PCIe controller to work in endpoint mode on R-Car SoCs | expand |
On Fri, Dec 13, 2019 at 08:47:46AM +0000, Lad Prabhakar wrote: > From: "Lad, Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com> > > This patch adds the bindings for the R-Car PCIe endpoint driver. > > Signed-off-by: Lad, Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > .../devicetree/bindings/pci/rcar-pci-ep.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci-ep.txt Please make this a DT schema. > > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > new file mode 100644 > index 0000000..7f0a97e > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > @@ -0,0 +1,37 @@ > +* Renesas R-Car PCIe Endpoint Controller DT description > + > +Required properties: > + "renesas,pcie-ep-r8a774c0" for the R8A774C0 SoC; Normal ordering is: renesas,r8a774c0-pcie-ep > + "renesas,pcie-ep-rcar-gen3" for a generic R-Car Gen3 or > + RZ/G2 compatible device. > + > + When compatible with the generic version, nodes must list the > + SoC-specific version corresponding to the platform first > + followed by the generic version. > + > +- reg: base address and length of the PCIe controller registers. > +- outbound-ranges: outbound windows base address and length including the flags. > +- resets: Must contain phandles to PCIe-related reset lines exposed by IP block How many? > +- clocks: from common clock binding: clock specifiers for the PCIe controller > + clock. > +- clock-names: from common clock binding: should be "pcie". > + > +Optional Property: > +- max-functions: Maximum number of functions that can be configured (default 1). > + > +Example: > + > +SoC-specific DT Entry: > + > + pcie_ep: pcie_ep@fe000000 { pcie-ep@ > + compatible = "renesas,pcie-ep-r8a774c0", "renesas,pcie-rcar-gen2"; > + reg = <0 0xfe000000 0 0x80000>; > + outbound-ranges = <0xa 0x0 0xfe100000 0 0x000100000 > + 0xa 0x0 0xfe200000 0 0x000200000 > + 0x6 0x0 0x30000000 0 0x008000000 > + 0x6 0x0 0x38000000 0 0x008000000>; > + clocks = <&cpg CPG_MOD 319>; > + clock-names = "pcie"; > + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; > + resets = <&cpg 319>; > + }; > -- > 2.7.4 >
Hi Rob, Thank you for the review. On Thu, Dec 19, 2019 at 11:35 PM Rob Herring <robh@kernel.org> wrote: > > On Fri, Dec 13, 2019 at 08:47:46AM +0000, Lad Prabhakar wrote: > > From: "Lad, Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > This patch adds the bindings for the R-Car PCIe endpoint driver. > > > > Signed-off-by: Lad, Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > --- > > .../devicetree/bindings/pci/rcar-pci-ep.txt | 37 ++++++++++++++++++++++ > > 1 file changed, 37 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > > Please make this a DT schema. > sure will do. > > > > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > > new file mode 100644 > > index 0000000..7f0a97e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > > @@ -0,0 +1,37 @@ > > +* Renesas R-Car PCIe Endpoint Controller DT description > > + > > +Required properties: > > + "renesas,pcie-ep-r8a774c0" for the R8A774C0 SoC; > > Normal ordering is: renesas,r8a774c0-pcie-ep > > > + "renesas,pcie-ep-rcar-gen3" for a generic R-Car Gen3 or > > + RZ/G2 compatible device. > > + > > + When compatible with the generic version, nodes must list the > > + SoC-specific version corresponding to the platform first > > + followed by the generic version. > > + > > +- reg: base address and length of the PCIe controller registers. > > +- outbound-ranges: outbound windows base address and length including the flags. > > +- resets: Must contain phandles to PCIe-related reset lines exposed by IP block > > How many? > should be one. > > +- clocks: from common clock binding: clock specifiers for the PCIe controller > > + clock. > > +- clock-names: from common clock binding: should be "pcie". > > + > > +Optional Property: > > +- max-functions: Maximum number of functions that can be configured (default 1). > > + > > +Example: > > + > > +SoC-specific DT Entry: > > + > > + pcie_ep: pcie_ep@fe000000 { > > pcie-ep@ > will fix that. Cheers, --Prabhakar > > + compatible = "renesas,pcie-ep-r8a774c0", "renesas,pcie-rcar-gen2"; > > + reg = <0 0xfe000000 0 0x80000>; > > + outbound-ranges = <0xa 0x0 0xfe100000 0 0x000100000 > > + 0xa 0x0 0xfe200000 0 0x000200000 > > + 0x6 0x0 0x30000000 0 0x008000000 > > + 0x6 0x0 0x38000000 0 0x008000000>; > > + clocks = <&cpg CPG_MOD 319>; > > + clock-names = "pcie"; > > + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; > > + resets = <&cpg 319>; > > + }; > > -- > > 2.7.4 > >
Hi Kishon/Rob, On Fri, Dec 13, 2019 at 8:48 AM Lad Prabhakar <prabhakar.csengg@gmail.com> wrote: > > From: "Lad, Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com> > > This patch adds the bindings for the R-Car PCIe endpoint driver. > > Signed-off-by: Lad, Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > .../devicetree/bindings/pci/rcar-pci-ep.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > new file mode 100644 > index 0000000..7f0a97e > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt > @@ -0,0 +1,37 @@ > +* Renesas R-Car PCIe Endpoint Controller DT description > + > +Required properties: > + "renesas,pcie-ep-r8a774c0" for the R8A774C0 SoC; > + "renesas,pcie-ep-rcar-gen3" for a generic R-Car Gen3 or > + RZ/G2 compatible device. > + > + When compatible with the generic version, nodes must list the > + SoC-specific version corresponding to the platform first > + followed by the generic version. > + > +- reg: base address and length of the PCIe controller registers. > +- outbound-ranges: outbound windows base address and length including the flags. > +- resets: Must contain phandles to PCIe-related reset lines exposed by IP block > +- clocks: from common clock binding: clock specifiers for the PCIe controller > + clock. > +- clock-names: from common clock binding: should be "pcie". > + > +Optional Property: > +- max-functions: Maximum number of functions that can be configured (default 1). > + > +Example: > + > +SoC-specific DT Entry: > + > + pcie_ep: pcie_ep@fe000000 { > + compatible = "renesas,pcie-ep-r8a774c0", "renesas,pcie-rcar-gen2"; > + reg = <0 0xfe000000 0 0x80000>; > + outbound-ranges = <0xa 0x0 0xfe100000 0 0x000100000 > + 0xa 0x0 0xfe200000 0 0x000200000 > + 0x6 0x0 0x30000000 0 0x008000000 > + 0x6 0x0 0x38000000 0 0x008000000>; > + clocks = <&cpg CPG_MOD 319>; > + clock-names = "pcie"; > + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; > + resets = <&cpg 319>; > + }; Now that I have dropped "outbound-ranges", do the below bindings look good ? - reg-names: Must include the following names - "apb-base" - Controller base - "memory0" - memory window 0 used by the host to map the pci address locally - "memory1" - memory window 1 used by the host to map the pci address locally - "memory2" - memory window 2 used by the host to map the pci address locally - "memory3" - memory window 3 used by the host to map the pci address locally pcie-ep: pcie_ep@fe000000 { compatible = "renesas,pcie-r8a774c0", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>, <0x0 0xfe100000 0 0x100000>, <0x0 0xfe200000 0 0x200000>, <0x0 0x30000000 0 0x8000000>, <0x0 0x38000000 0 0x8000000>; reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; clocks = <&cpg CPG_MOD 319>; clock-names = "pcie"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 319>; }; Cheers, --Prabhakar
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt new file mode 100644 index 0000000..7f0a97e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt @@ -0,0 +1,37 @@ +* Renesas R-Car PCIe Endpoint Controller DT description + +Required properties: + "renesas,pcie-ep-r8a774c0" for the R8A774C0 SoC; + "renesas,pcie-ep-rcar-gen3" for a generic R-Car Gen3 or + RZ/G2 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + +- reg: base address and length of the PCIe controller registers. +- outbound-ranges: outbound windows base address and length including the flags. +- resets: Must contain phandles to PCIe-related reset lines exposed by IP block +- clocks: from common clock binding: clock specifiers for the PCIe controller + clock. +- clock-names: from common clock binding: should be "pcie". + +Optional Property: +- max-functions: Maximum number of functions that can be configured (default 1). + +Example: + +SoC-specific DT Entry: + + pcie_ep: pcie_ep@fe000000 { + compatible = "renesas,pcie-ep-r8a774c0", "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + outbound-ranges = <0xa 0x0 0xfe100000 0 0x000100000 + 0xa 0x0 0xfe200000 0 0x000200000 + 0x6 0x0 0x30000000 0 0x008000000 + 0x6 0x0 0x38000000 0 0x008000000>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 319>; + };