@@ -110,20 +110,6 @@ vcc_vbus_typec0: vcc-vbus-typec0 {
regulator-max-microvolt = <5000000>;
};
- /*
- * should be placed inside mp8859, but not until mp8859 has
- * its own dt-binding.
- */
- dc_12v: mp8859-dcdc1 {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <&vcc_vbus_typec0>;
- };
-
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
@@ -546,6 +532,24 @@ fusb0: usb-typec@22 {
vbus-supply = <&vcc_vbus_typec0>;
status = "okay";
};
+
+ mp8859: regulator@66 {
+ compatible = "mps,mp8859";
+ reg = <0x66>;
+ dc_12v: mp8859_dcdc {
+ regulator-name = "dc_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_vbus_typec0>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <12000000>;
+ };
+ };
+ };
};
&i2s0 {
The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply. This supplies 5V only in default state after booting. Now we can control the output voltage via I2C interface. Add a node for the driver to reach 12V. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> --- .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 32 +++++++++++-------- 1 file changed, 18 insertions(+), 14 deletions(-)