| Message ID | 20200312171441.21144-2-jbx6244@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodes | expand |
Am Donnerstag, 12. März 2020, 18:14:39 CET schrieb Johan Jonker: > A test with the command below gives for example this error: > > arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30160000: > 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' > > 'clock-names' is not a valid property name for usb_host nodes with > compatible string 'generic-ohci', so remove them. > > make ARCH=arm dtbs_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml > > Signed-off-by: Johan Jonker <jbx6244@gmail.com> applied for 5.7 Thanks Heiko
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 6503247e9..06172ebbf 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -732,7 +732,6 @@ reg = <0x300a0000 0x20000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy0>; - clock-names = "usbhost", "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -753,7 +752,6 @@ reg = <0x300e0000 0x20000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST1>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_otg>; phy-names = "usb"; status = "disabled"; @@ -774,7 +772,6 @@ reg = <0x30120000 0x20000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST2>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; status = "disabled"; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index d33e606be..153868c62 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -505,7 +505,6 @@ reg = <0x30160000 0x20000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled";
A test with the command below gives for example this error: arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30160000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ohci', so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm/boot/dts/rk322x.dtsi | 3 --- arch/arm/boot/dts/rv1108.dtsi | 1 - 2 files changed, 4 deletions(-)