| Message ID | 20200428100019.19155-5-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | rk3399: Sync linux v5.7-rc1 dts(i) | expand |
On 2020/4/28 下午6:00, Jagan Teki wrote: > Sync rk3399 dts(i) files from v5.7-rc1 linux-next. > > Reason: > To get updated PCIe nodes and properties on respective > dts(i) files. > > Summary: > - sync won't include new board dts(i) > - sync will add required files used on respective dts(i) > - rk3399-puma-u-boot.dtsi spiflash label changed to norflash > - move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi > - move legacy max-frequency of sdhci into rk3399-u-boot.dtsi > - update cross-ec-[keyboard|sbs].dtsi path as per U-Boot > - keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > Changes for v2: > - keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi > > arch/arm/dts/cros-ec-keyboard.dtsi | 10 +- > arch/arm/dts/cros-ec-sbs.dtsi | 39 +- > arch/arm/dts/rk3399-evb.dts | 520 +++++++++++----- > arch/arm/dts/rk3399-ficus.dts | 6 + > arch/arm/dts/rk3399-firefly.dts | 251 ++++++-- > arch/arm/dts/rk3399-gru-bob.dts | 16 +- > arch/arm/dts/rk3399-gru-chromebook.dtsi | 40 +- > arch/arm/dts/rk3399-gru-kevin.dts | 34 +- > arch/arm/dts/rk3399-gru.dtsi | 90 ++- > arch/arm/dts/rk3399-khadas-edge.dtsi | 3 + > arch/arm/dts/rk3399-leez-p710.dts | 36 +- > arch/arm/dts/rk3399-nanopc-t4.dts | 47 +- > arch/arm/dts/rk3399-nanopi4.dtsi | 66 +- > arch/arm/dts/rk3399-orangepi.dts | 79 ++- > arch/arm/dts/rk3399-puma-u-boot.dtsi | 25 +- > arch/arm/dts/rk3399-puma.dtsi | 567 +++++++---------- > arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 36 ++ > arch/arm/dts/rk3399-roc-pc.dts | 3 +- > arch/arm/dts/rk3399-roc-pc.dtsi | 35 +- > arch/arm/dts/rk3399-rock-pi-4.dts | 129 ++++ > arch/arm/dts/rk3399-rock960.dts | 49 ++ > arch/arm/dts/rk3399-rock960.dtsi | 13 +- > arch/arm/dts/rk3399-rockpro64.dts | 751 +--------------------- > arch/arm/dts/rk3399-rockpro64.dtsi | 797 ++++++++++++++++++++++++ > arch/arm/dts/rk3399-u-boot.dtsi | 1 + > arch/arm/dts/rk3399.dtsi | 583 ++++++++++------- > 26 files changed, 2574 insertions(+), 1652 deletions(-) > create mode 100644 arch/arm/dts/rk3399-rockpro64.dtsi > > diff --git a/arch/arm/dts/cros-ec-keyboard.dtsi b/arch/arm/dts/cros-ec-keyboard.dtsi > index 9c7fb0acae..4a0c1037fb 100644 > --- a/arch/arm/dts/cros-ec-keyboard.dtsi > +++ b/arch/arm/dts/cros-ec-keyboard.dtsi > @@ -1,11 +1,8 @@ > +// SPDX-License-Identifier: GPL-2.0-only > /* > * Keyboard dts fragment for devices that use cros-ec-keyboard > * > * Copyright (c) 2014 Google, Inc > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > */ > > #include <dt-bindings/input/input.h> > @@ -22,6 +19,7 @@ > MATRIX_KEY(0x00, 0x02, KEY_F1) > MATRIX_KEY(0x00, 0x03, KEY_B) > MATRIX_KEY(0x00, 0x04, KEY_F10) > + MATRIX_KEY(0x00, 0x05, KEY_RO) > MATRIX_KEY(0x00, 0x06, KEY_N) > MATRIX_KEY(0x00, 0x08, KEY_EQUAL) > MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) > @@ -34,6 +32,7 @@ > MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) > MATRIX_KEY(0x01, 0x09, KEY_F9) > MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) > + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) > > MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) > MATRIX_KEY(0x02, 0x01, KEY_TAB) > @@ -45,6 +44,7 @@ > MATRIX_KEY(0x02, 0x07, KEY_102ND) > MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) > MATRIX_KEY(0x02, 0x09, KEY_F8) > + MATRIX_KEY(0x02, 0x0a, KEY_YEN) > > MATRIX_KEY(0x03, 0x01, KEY_GRAVE) > MATRIX_KEY(0x03, 0x02, KEY_F2) > @@ -52,7 +52,9 @@ > MATRIX_KEY(0x03, 0x04, KEY_F5) > MATRIX_KEY(0x03, 0x06, KEY_6) > MATRIX_KEY(0x03, 0x08, KEY_MINUS) > + MATRIX_KEY(0x03, 0x09, KEY_F13) > MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) > + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) > > MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) > MATRIX_KEY(0x04, 0x01, KEY_A) > diff --git a/arch/arm/dts/cros-ec-sbs.dtsi b/arch/arm/dts/cros-ec-sbs.dtsi > index dfe5ea6ca2..71f5c5ecce 100644 > --- a/arch/arm/dts/cros-ec-sbs.dtsi > +++ b/arch/arm/dts/cros-ec-sbs.dtsi > @@ -1,8 +1,45 @@ > -// SPDX-License-Identifier: GPL-2.0 > /* > * Smart battery dts fragment for devices that use cros-ec-sbs > * > * Copyright (c) 2015 Google, Inc > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > */ > > &i2c_tunnel { > diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts > index c72719c0d3..694b0d08d6 100644 > --- a/arch/arm/dts/rk3399-evb.dts > +++ b/arch/arm/dts/rk3399-evb.dts > @@ -1,86 +1,18 @@ > -// SPDX-License-Identifier: GPL-2.0+ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > /* > - * (C) Copyright 2016 Rockchip Electronics Co., Ltd > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd > */ > > /dts-v1/; > #include <dt-bindings/pwm/pwm.h> > -#include <dt-bindings/pinctrl/rockchip.h> > #include "rk3399.dtsi" > > / { > model = "Rockchip RK3399 Evaluation Board"; > - compatible = "rockchip,rk3399-evb", "rockchip,rk3399", > - "google,rk3399evb-rev2"; > - > - chosen { > - stdout-path = &uart2; > - }; > - > - vdd_center: vdd-center { > - compatible = "pwm-regulator"; > - pwms = <&pwm3 0 25000 1>; > - regulator-name = "vdd_center"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1400000>; > - regulator-init-microvolt = <950000>; > - regulator-always-on; > - regulator-boot-on; > - status = "okay"; > - }; > - > - vccsys: vccsys { > - compatible = "regulator-fixed"; > - regulator-name = "vccsys"; > - regulator-boot-on; > - regulator-always-on; > - }; > - > - vcc3v3_sys: vcc3v3-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - vcc_phy: vcc-phy-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_phy"; > - regulator-always-on; > - regulator-boot-on; > - }; > - > - vcc5v0_host: vcc5v0-host-en { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_host"; > - gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; > - }; > - > - vcc5v0_typec0: vcc5v0-typec0-en { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_typec0"; > - gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; > - }; > - > - vcc5v0_typec1: vcc5v0-typec1-en { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_typec1"; > - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; > - }; > - > - clkin_gmac: external-gmac-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "clkin_gmac"; > - #clock-cells = <0>; > - }; > + compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; > > backlight: backlight { > compatible = "pwm-backlight"; > - power-supply = <&vccsys>; > - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; > brightness-levels = < > 0 1 2 3 4 5 6 7 > 8 9 10 11 12 13 14 15 > @@ -116,18 +48,98 @@ > 248 249 250 251 252 253 254 255>; > default-brightness-level = <200>; > pwms = <&pwm0 0 25000 0>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pwm0_pin>; > - pwm-delay-us = <10000>; > - status = "disabled"; > }; > > - panel:panel { > - compatible = "simple-panel"; > - power-supply = <&vcc33_lcd>; > + edp_panel: edp-panel { > + compatible ="lg,lp079qx1-sp0v"; > backlight = <&backlight>; > - /*enable-gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;*/ > - status = "disabled"; > + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; > + power-supply = <&vcc3v3_s0>; > + > + port { > + panel_in_edp: endpoint { > + remote-endpoint = <&edp_out_panel>; > + }; > + }; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + vdd_center: vdd-center { > + compatible = "pwm-regulator"; > + pwms = <&pwm3 0 25000 0>; > + regulator-name = "vdd_center"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + regulator-always-on; > + regulator-boot-on; > + status = "okay"; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc5v0_sys: vcc5v0-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc_phy: vcc-phy-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_phy"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vcc_phy: vcc-phy-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_phy"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > +}; > + > +&edp { > + status = "okay"; > + force-hpd; > + > + ports { > + edp_out: port@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + edp_out_panel: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&panel_in_edp>; > + }; > + }; > }; > }; > > @@ -135,24 +147,253 @@ > status = "okay"; > }; > > -&pwm0 { > +&gmac { > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + assigned-clock-parents = <&clkin_gmac>; > + clock_in_out = "input"; > + phy-supply = <&vcc_phy>; > + phy-mode = "rgmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + tx_delay = <0x28>; > + rx_delay = <0x11>; > status = "okay"; > }; > > -&pwm2 { > +&i2c0 { > status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio1>; > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + wakeup-source; > + #clock-cells = <1>; > + clock-output-names = "rk808-clkout1", "rk808-clkout2"; > + > + vcc1-supply = <&vcc3v3_sys>; > + vcc2-supply = <&vcc3v3_sys>; > + vcc3-supply = <&vcc3v3_sys>; > + vcc4-supply = <&vcc3v3_sys>; > + vcc6-supply = <&vcc3v3_sys>; > + vcc7-supply = <&vcc3v3_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc3v3_sys>; > + vcc10-supply = <&vcc3v3_sys>; > + vcc11-supply = <&vcc3v3_sys>; > + vcc12-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcc1v8_pmu>; > + > + regulators { > + vdd_log: DCDC_REG1 { > + regulator-name = "vdd_log"; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <900000>; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc1v8_dvp: LDO_REG1 { > + regulator-name = "vcc1v8_dvp"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v0_tp: LDO_REG2 { > + regulator-name = "vcc3v0_tp"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc1v8_pmu: LDO_REG3 { > + regulator-name = "vcc1v8_pmu"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sd: LDO_REG4 { > + regulator-name = "vcc_sd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-name = "vcca1v8_codec"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_b"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator@41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_gpu"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > }; > > -&pwm3 { > +&pwm0 { > status = "okay"; > }; > > -&saradc { > +&pwm2 { > status = "okay"; > }; > > -&sdmmc { > - bus-width = <4>; > +&pwm3 { > status = "okay"; > }; > > @@ -164,115 +405,76 @@ > status = "okay"; > }; > > -&uart2 { > - status = "okay"; > +&pcie_phy { > + status = "disabled"; > }; > > -&usb_host0_ehci { > - status = "okay"; > +&pcie0 { > + ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; > + num-lanes = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_clkreqn_cpm>; > + status = "disabled"; > }; > > -&usb_host0_ohci { > +&u2phy0 { > status = "okay"; > }; > > -&usbdrd3_0 { > - vbus-supply = <&vcc5v0_typec0>; > +&u2phy0_host { > + phy-supply = <&vcc5v0_host>; > status = "okay"; > }; > > -&usb_host1_ehci { > +&u2phy1 { > status = "okay"; > }; > > -&usb_host1_ohci { > +&u2phy1_host { > + phy-supply = <&vcc5v0_host>; > status = "okay"; > }; > > -&usbdrd3_1 { > - vbus-supply = <&vcc5v0_typec1>; > +&uart2 { > status = "okay"; > }; > > -&i2c0 { > +&usb_host0_ehci { > status = "okay"; > - clock-frequency = <400000>; > - i2c-scl-falling-time-ns = <50>; > - i2c-scl-rising-time-ns = <100>; > - > - rk808: pmic@1b { > - compatible = "rockchip,rk808"; > - clock-output-names = "xin32k", "wifibt_32kin"; > - interrupt-parent = <&gpio0>; > - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - reg = <0x1b>; > - rockchip,system-power-controller; > - #clock-cells = <1>; > - status = "okay"; > +}; > > - vcc12-supply = <&vcc3v3_sys>; > +&usb_host0_ohci { > + status = "okay"; > +}; > > - regulators { > - vcc33_lcd: SWITCH_REG2 { > - regulator-always-on; > - regulator-boot-on; > - regulator-name = "vcc33_lcd"; > - }; > - }; > - }; > +&usb_host1_ehci { > + status = "okay"; > }; > > -&mipi_dsi { > - status = "disabled"; > - rockchip,panel = <&panel>; > - display-timings { > - timing0 { > - bits-per-pixel = <24>; > - clock-frequency = <160000000>; > - hfront-porch = <120>; > - hsync-len = <20>; > - hback-porch = <21>; > - hactive = <1200>; > - vfront-porch = <21>; > - vsync-len = <3>; > - vback-porch = <18>; > - vactive = <1920>; > - hsync-active = <0>; > - vsync-active = <0>; > - de-active = <1>; > - pixelclk-active = <0>; > - }; > - }; > +&usb_host1_ohci { > + status = "okay"; > }; > > &pinctrl { > pmic { > pmic_int_l: pmic-int-l { > rockchip,pins = > - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; > + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; > }; > + }; > > - pmic_dvs2: pmic-dvs2 { > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > rockchip,pins = > - <1 18 RK_FUNC_GPIO &pcfg_pull_down>; > + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > }; > > -&gmac { > - phy-supply = <&vcc_phy>; > - phy-mode = "rgmii"; > - clock_in_out = "input"; > - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - snps,reset-delays-us = <0 10000 50000>; > - assigned-clocks = <&cru SCLK_RMII_SRC>; > - assigned-clock-parents = <&clkin_gmac>; > - pinctrl-names = "default"; > - pinctrl-0 = <&rgmii_pins>; > - tx_delay = <0x28>; > - rx_delay = <0x11>; > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > status = "okay"; > }; > diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts > index 6b059bd7a0..ebe2ee77ba 100644 > --- a/arch/arm/dts/rk3399-ficus.dts > +++ b/arch/arm/dts/rk3399-ficus.dts > @@ -146,6 +146,12 @@ > }; > }; > > +&spi1 { > + /* On both Low speed and High speed expansion */ > + cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; > + status = "okay"; > +}; > + > &usbdrd_dwc3_0 { > dr_mode = "host"; > }; > diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts > index 89c67fd24c..d63faf38cc 100644 > --- a/arch/arm/dts/rk3399-firefly.dts > +++ b/arch/arm/dts/rk3399-firefly.dts > @@ -1,19 +1,20 @@ > -// SPDX-License-Identifier: GPL-2.0+ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > /* > * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > */ > > /dts-v1/; > +#include <dt-bindings/input/linux-event-codes.h> > #include <dt-bindings/pwm/pwm.h> > -#include <dt-bindings/pinctrl/rockchip.h> > #include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > > / { > model = "Firefly-RK3399 Board"; > compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; > > chosen { > - stdout-path = &uart2; > + stdout-path = "serial2:1500000n8"; > }; > > backlight: backlight { > @@ -63,6 +64,48 @@ > #clock-cells = <0>; > }; > > + dc_12v: dc-12v { > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + autorepeat; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrbtn>; > + > + power { > + debounce-interval = <100>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "GPIO Key Power"; > + linux,code = <KEY_POWER>; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; > + > + work-led { > + label = "work"; > + default-state = "on"; > + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; > + }; > + > + diy-led { > + label = "diy"; > + default-state = "off"; > + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > rt5640-sound { > compatible = "simple-audio-card"; > simple-audio-card,name = "rockchip,rt5640-codec"; > @@ -102,15 +145,27 @@ > reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > }; > > + /* switched by pmic_sleep */ > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; > + > vcc3v3_pcie: vcc3v3-pcie-regulator { > compatible = "regulator-fixed"; > enable-active-high; > gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > - pinctrl-0 = <&pcie_drv>; > + pinctrl-0 = <&pcie_pwr_en>; > regulator-name = "vcc3v3_pcie"; > regulator-always-on; > regulator-boot-on; > + vin-supply = <&dc_12v>; > }; > > vcc3v3_sys: vcc3v3-sys { > @@ -120,32 +175,29 @@ > regulator-boot-on; > regulator-min-microvolt = <3300000>; > regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_sys>; > }; > > + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > vcc5v0_host: vcc5v0-host-regulator { > compatible = "regulator-fixed"; > enable-active-high; > gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > - pinctrl-0 = <&host_vbus_drv>; > + pinctrl-0 = <&vcc5v0_host_en>; > regulator-name = "vcc5v0_host"; > regulator-always-on; > + vin-supply = <&vcc_sys>; > }; > > - vcc5v0_sys: vcc5v0-sys { > + vcc_sys: vcc-sys { > compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > + regulator-name = "vcc_sys"; > regulator-always-on; > regulator-boot-on; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > - }; > - > - vcc_phy: vcc-phy-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_phy"; > - regulator-always-on; > - regulator-boot-on; > + vin-supply = <&dc_12v>; > }; > > vdd_log: vdd-log { > @@ -156,16 +208,7 @@ > regulator-boot-on; > regulator-min-microvolt = <430000>; > regulator-max-microvolt = <1400000>; > - regulator-init-microvolt = <950000>; > - }; > - > - vccadc_ref: vccadc-ref { > - compatible = "regulator-fixed"; > - regulator-name = "vcc1v8_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_sys>; > }; > }; > > @@ -201,15 +244,22 @@ > assigned-clocks = <&cru SCLK_RMII_SRC>; > assigned-clock-parents = <&clkin_gmac>; > clock_in_out = "input"; > - phy-supply = <&vcc_phy>; > + phy-supply = <&vcc_lan>; > phy-mode = "rgmii"; > pinctrl-names = "default"; > pinctrl-0 = <&rgmii_pins>; > snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > snps,reset-active-low; > snps,reset-delays-us = <0 10000 50000>; > - tx_delay = <0x33>; > - rx_delay = <0x45>; > + tx_delay = <0x28>; > + rx_delay = <0x11>; > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_cec>; > status = "okay"; > }; > > @@ -231,16 +281,16 @@ > rockchip,system-power-controller; > wakeup-source; > > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > + vcc1-supply = <&vcc_sys>; > + vcc2-supply = <&vcc_sys>; > + vcc3-supply = <&vcc_sys>; > + vcc4-supply = <&vcc_sys>; > + vcc6-supply = <&vcc_sys>; > + vcc7-supply = <&vcc_sys>; > vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - vcc10-supply = <&vcc3v3_sys>; > - vcc11-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc_sys>; > + vcc10-supply = <&vcc_sys>; > + vcc11-supply = <&vcc_sys>; > vcc12-supply = <&vcc3v3_sys>; > vddio-supply = <&vcc1v8_pmu>; > > @@ -301,12 +351,12 @@ > }; > }; > > - vcc3v0_tp: LDO_REG2 { > - regulator-name = "vcc3v0_tp"; > + vcc2v8_dvp: LDO_REG2 { > + regulator-name = "vcc2v8_dvp"; > regulator-always-on; > regulator-boot-on; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > regulator-state-mem { > regulator-off-in-suspend; > }; > @@ -324,8 +374,8 @@ > }; > }; > > - vcc_sd: LDO_REG4 { > - regulator-name = "vcc_sd"; > + vcc_sdio: LDO_REG4 { > + regulator-name = "vcc_sdio"; > regulator-always-on; > regulator-boot-on; > regulator-min-microvolt = <1800000>; > @@ -382,7 +432,7 @@ > }; > }; > > - vcc3v3_s3: SWITCH_REG1 { > + vcc3v3_s3: vcc_lan: SWITCH_REG1 { > regulator-name = "vcc3v3_s3"; > regulator-always-on; > regulator-boot-on; > @@ -412,7 +462,7 @@ > regulator-ramp-delay = <1000>; > regulator-always-on; > regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > + vin-supply = <&vcc_sys>; > > regulator-state-mem { > regulator-off-in-suspend; > @@ -429,7 +479,7 @@ > regulator-ramp-delay = <1000>; > regulator-always-on; > regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > + vin-supply = <&vcc_sys>; > > regulator-state-mem { > regulator-off-in-suspend; > @@ -476,19 +526,16 @@ > &i2s0 { > rockchip,playback-channels = <8>; > rockchip,capture-channels = <8>; > - #sound-dai-cells = <0>; > status = "okay"; > }; > > &i2s1 { > rockchip,playback-channels = <2>; > rockchip,capture-channels = <2>; > - #sound-dai-cells = <0>; > status = "okay"; > }; > > &i2s2 { > - #sound-dai-cells = <0>; > status = "okay"; > }; > > @@ -497,7 +544,7 @@ > > bt656-supply = <&vcc1v8_dvp>; > audio-supply = <&vcca1v8_codec>; > - sdmmc-supply = <&vcc_sd>; > + sdmmc-supply = <&vcc_sdio>; > gpio1830-supply = <&vcc_3v0>; > }; > > @@ -509,7 +556,7 @@ > ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; > num-lanes = <4>; > pinctrl-names = "default"; > - pinctrl-0 = <&pcie_clkreqn>; > + pinctrl-0 = <&pcie_clkreqn_cpm>; > status = "okay"; > }; > > @@ -532,7 +579,7 @@ > }; > > pcie { > - pcie_drv: pcie-drv { > + pcie_pwr_en: pcie-pwr-en { > rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > }; > > @@ -570,10 +617,26 @@ > }; > > usb2 { > - host_vbus_drv: host-vbus-drv { > + vcc5v0_host_en: vcc5v0-host-en { > rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > + > + wifi { > + wifi_host_wake_l: wifi-host-wake-l { > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + leds { > + work_led_gpio: work_led-gpio { > + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + diy_led_gpio: diy_led-gpio { > + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > }; > > &pwm0 { > @@ -585,24 +648,70 @@ > }; > > &saradc { > - vref-supply = <&vccadc_ref>; > + vref-supply = <&vcca1v8_s3>; > status = "okay"; > }; > > +&sdio0 { > + /* WiFi & BT combo module Ampak AP6356S */ > + bus-width = <4>; > + cap-sdio-irq; > + cap-sd-highspeed; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; > + sd-uhs-sdr104; > + > + /* Power supply */ > + vqmmc-supply = &vcc1v8_s3; /* IO line */ > + vmmc-supply = &vcc_sdio; /* card's power */ > + > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; > + interrupt-names = "host-wake"; > + brcm,drive-strength = <5>; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_host_wake_l>; > + }; > +}; > + > &sdmmc { > bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > + disable-wp; > + max-frequency = <150000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > status = "okay"; > }; > > &sdhci { > bus-width = <8>; > - keep-power-in-suspend; > mmc-hs400-1_8v; > mmc-hs400-enhanced-strobe; > non-removable; > status = "okay"; > }; > > +&tcphy0 { > + status = "okay"; > +}; > + > +&tcphy1 { > + status = "okay"; > +}; > + > &tsadc { > /* tshut mode 0:CRU 1:GPIO */ > rockchip,hw-tshut-mode = <1>; > @@ -662,3 +771,37 @@ > &usb_host1_ohci { > status = "okay"; > }; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + status = "okay"; > + dr_mode = "otg"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > + status = "okay"; > +}; > + > +&vopl { > + status = "okay"; > +}; > + > +&vopl_mmu { > + status = "okay"; > +}; > diff --git a/arch/arm/dts/rk3399-gru-bob.dts b/arch/arm/dts/rk3399-gru-bob.dts > index 1ee0dc0d9f..e6c1c94c8d 100644 > --- a/arch/arm/dts/rk3399-gru-bob.dts > +++ b/arch/arm/dts/rk3399-gru-bob.dts > @@ -18,11 +18,11 @@ > "google,bob", "google,gru", "rockchip,rk3399"; > > edp_panel: edp-panel { > - compatible = "boe,nv101wxmn51", "simple-panel"; > + compatible = "boe,nv101wxmn51"; > backlight = <&backlight>; > power-supply = <&pp3300_disp>; > > - ports { > + port { > panel_in_edp: endpoint { > remote-endpoint = <&edp_out_panel>; > }; > @@ -68,12 +68,22 @@ > > &spi0 { > status = "okay"; > + > + cr50@0 { > + compatible = "google,cr50"; > + reg = <0>; > + interrupt-parent = <&gpio0>; > + interrupts = <5 IRQ_TYPE_EDGE_RISING>; > + pinctrl-names = "default"; > + pinctrl-0 = <&h1_int_od_l>; > + spi-max-frequency = <800000>; > + }; > }; > > &pinctrl { > tpm { > h1_int_od_l: h1-int-od-l { > - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > }; > diff --git a/arch/arm/dts/rk3399-gru-chromebook.dtsi b/arch/arm/dts/rk3399-gru-chromebook.dtsi > index c6495adcca..1384dabbdf 100644 > --- a/arch/arm/dts/rk3399-gru-chromebook.dtsi > +++ b/arch/arm/dts/rk3399-gru-chromebook.dtsi > @@ -194,20 +194,25 @@ > > backlight: backlight { > compatible = "pwm-backlight"; > - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 > - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 > - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 > - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 > - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 > - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 > - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; > - default-brightness-level = <51>; > enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; > power-supply = <&pp3300_disp>; > pinctrl-names = "default"; > pinctrl-0 = <&bl_en>; > pwm-delay-us = <10000>; > }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_host_wake_l>; > + > + wake_on_bt: wake-on-bt { > + label = "Wake-on-Bluetooth"; > + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_WAKEUP>; > + wakeup-source; > + }; > + }; > }; > > &ppvar_bigcpu { > @@ -232,7 +237,6 @@ > &edp { > status = "okay"; > > - rockchip,panel = <&edp_panel>; > ports { > edp_out: port@1 { > reg = <1>; > @@ -287,11 +291,9 @@ ap_i2c_tp: &i2c5 { > #pwm-cells = <1>; > }; > > - usbc_extcon1: extcon@1 { > + usbc_extcon1: extcon1 { > compatible = "google,extcon-usbc-cros-ec"; > google,usb-port-id = <1>; > - > - #extcon-cells = <0>; > }; > }; > > @@ -361,27 +363,27 @@ ap_i2c_tp: &i2c5 { > &pinctrl { > discrete-regulators { > pp1500_en: pp1500-en { > - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > > pp1800_audio_en: pp1800-audio-en { > - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO > &pcfg_pull_down>; > }; > > pp3000_en: pp3000-en { > - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO > + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > > pp3300_disp_en: pp3300-disp-en { > - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO > + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > > wlan_module_pd_l: wlan-module-pd-l { > - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO > + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO > &pcfg_pull_down>; > }; > }; > @@ -389,10 +391,10 @@ ap_i2c_tp: &i2c5 { > > &wifi { > wifi_perst_l: wifi-perst-l { > - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > }; > > wlan_host_wake_l: wlan-host-wake-l { > - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > diff --git a/arch/arm/dts/rk3399-gru-kevin.dts b/arch/arm/dts/rk3399-gru-kevin.dts > index 2cc7c47d6a..2bbef9fcbe 100644 > --- a/arch/arm/dts/rk3399-gru-kevin.dts > +++ b/arch/arm/dts/rk3399-gru-kevin.dts > @@ -39,11 +39,25 @@ > }; > > edp_panel: edp-panel { > - compatible = "sharp,lq123p1jx31", "simple-panel"; > + compatible = "sharp,lq123p1jx31"; > backlight = <&backlight>; > power-supply = <&pp3300_disp>; > > - ports { > + panel-timing { > + clock-frequency = <266666667>; > + hactive = <2400>; > + hfront-porch = <48>; > + hback-porch = <84>; > + hsync-len = <32>; > + hsync-active = <0>; > + vactive = <1600>; > + vfront-porch = <3>; > + vback-porch = <120>; > + vsync-len = <10>; > + vsync-active = <0>; > + }; > + > + port { > panel_in_edp: endpoint { > remote-endpoint = <&edp_out_panel>; > }; > @@ -118,13 +132,17 @@ > map0 { > trip = <&ppvar_bigcpu_alert>; > cooling-device = > - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > contribution = <4096>; > }; > map1 { > trip = <&ppvar_bigcpu_alert>; > cooling-device = > - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > contribution = <1024>; > }; > }; > @@ -286,24 +304,24 @@ ap_i2c_dig: &i2c2 { > digitizer { > /* Has external pullup */ > cpu1_dig_irq_l: cpu1-dig-irq-l { > - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > }; > > /* Has external pullup */ > cpu1_dig_pdct_l: cpu1-dig-pdct-l { > - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > discrete-regulators { > cpu3_pen_pwr_en: cpu3-pen-pwr-en { > - rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > pen { > cpu1_pen_eject: cpu1-pen-eject { > - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > }; > diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi > index 0e2e047180..34f03cf92d 100644 > --- a/arch/arm/dts/rk3399-gru.dtsi > +++ b/arch/arm/dts/rk3399-gru.dtsi > @@ -11,13 +11,7 @@ > > / { > chosen { > - u-boot,dm-pre-reloc; > stdout-path = "serial2:115200n8"; > - u-boot,spl-boot-order = &spi_flash; > - }; > - > - config { > - u-boot,spl-payload-offset = <0x40000>; > }; > > /* > @@ -268,17 +262,11 @@ > pp5000_usb_a_vbus: pp5000 { > }; > > - gpio_keys: gpio-keys { > - compatible = "gpio-keys"; > - pinctrl-names = "default"; > - pinctrl-0 = <&bt_host_wake_l>; > - > - wake_on_bt: wake-on-bt { > - label = "Wake-on-Bluetooth"; > - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; > - linux,code = <KEY_WAKEUP>; > - wakeup-source; > - }; > + ap_rtc_clk: ap-rtc-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32768>; > + clock-output-names = "xin32k"; > + #clock-cells = <0>; > }; > > max98357a: max98357a { > @@ -354,6 +342,7 @@ > cpu-supply = <&ppvar_bigcpu>; > }; > > + > &cru { > assigned-clocks = > <&cru PLL_GPLL>, <&cru PLL_CPLL>, > @@ -549,8 +538,7 @@ ap_i2c_audio: &i2c8 { > pinctrl-names = "default", "sleep"; > pinctrl-1 = <&spi1_sleep>; > > - spi_flash: spiflash@0 { > - u-boot,dm-pre-reloc; > + spiflash@0 { > compatible = "jedec,spi-nor"; > reg = <0>; > > @@ -565,16 +553,12 @@ ap_i2c_audio: &i2c8 { > > &spi5 { > status = "okay"; > - spi-activate-delay = <100>; > - spi-max-frequency = <3000000>; > - spi-deactivate-delay = <200>; > > cros_ec: ec@0 { > compatible = "google,cros-ec-spi"; > reg = <0>; > interrupt-parent = <&gpio0>; > interrupts = <1 IRQ_TYPE_LEVEL_LOW>; > - ec-interrupt = <&gpio0 1 GPIO_ACTIVE_LOW>; > pinctrl-names = "default"; > pinctrl-0 = <&ec_ap_int_l>; > spi-max-frequency = <3000000>; > @@ -586,11 +570,9 @@ ap_i2c_audio: &i2c8 { > #size-cells = <0>; > }; > > - usbc_extcon0: extcon@0 { > + usbc_extcon0: extcon0 { > compatible = "google,extcon-usbc-cros-ec"; > google,usb-port-id = <0>; > - > - #extcon-cells = <0>; > }; > }; > }; > @@ -692,29 +674,29 @@ ap_i2c_audio: &i2c8 { > > backlight-enable { > bl_en: bl-en { > - rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > cros-ec { > ec_ap_int_l: ec-ap-int-l { > - rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > > discrete-regulators { > sd_io_pwr_en: sd-io-pwr-en { > - rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO > + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > > sd_pwr_1800_sel: sd-pwr-1800-sel { > - rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO > + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > > sd_slot_pwr_en: sd-slot-pwr-en { > - rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO > + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO > &pcfg_pull_none>; > }; > }; > @@ -722,17 +704,17 @@ ap_i2c_audio: &i2c8 { > codec { > /* Has external pullup */ > headset_int_l: headset-int-l { > - rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; > }; > > mic_int: mic-int { > - rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; > + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; > }; > }; > > max98357a { > sdmode_en: sdmode-en { > - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; > }; > }; > > @@ -743,7 +725,7 @@ ap_i2c_audio: &i2c8 { > * to hack this as gpio, so the EP could be able to > * de-assert it along and make ClockPM(CPM) work. > */ > - rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > @@ -754,20 +736,20 @@ ap_i2c_audio: &i2c8 { > */ > sdmmc_bus4: sdmmc-bus4 { > rockchip,pins = > - <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, > - <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, > - <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, > - <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; > + <4 RK_PB0 1 &pcfg_pull_none_8ma>, > + <4 RK_PB1 1 &pcfg_pull_none_8ma>, > + <4 RK_PB2 1 &pcfg_pull_none_8ma>, > + <4 RK_PB3 1 &pcfg_pull_none_8ma>; > }; > > sdmmc_clk: sdmmc-clk { > rockchip,pins = > - <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; > + <4 RK_PB4 1 &pcfg_pull_none_8ma>; > }; > > sdmmc_cmd: sdmmc-cmd { > rockchip,pins = > - <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; > + <4 RK_PB5 1 &pcfg_pull_none_8ma>; > }; > > /* > @@ -781,12 +763,12 @@ ap_i2c_audio: &i2c8 { > */ > sdmmc_cd: sdmmc-cd { > rockchip,pins = > - <0 7 RK_FUNC_1 &pcfg_pull_none>; > + <0 RK_PA7 1 &pcfg_pull_none>; > }; > > /* This is where we actually hook up CD; has external pull */ > sdmmc_cd_gpio: sdmmc-cd-gpio { > - rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > @@ -796,47 +778,47 @@ ap_i2c_audio: &i2c8 { > * Pull down SPI1 CLK/CS/RX/TX during suspend, to > * prevent leakage. > */ > - rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, > - <1 10 RK_FUNC_GPIO &pcfg_pull_down>, > - <1 7 RK_FUNC_GPIO &pcfg_pull_down>, > - <1 8 RK_FUNC_GPIO &pcfg_pull_down>; > + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>, > + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>, > + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>, > + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; > }; > }; > > touchscreen { > touch_int_l: touch-int-l { > - rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; > }; > > touch_reset_l: touch-reset-l { > - rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > trackpad { > ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { > - rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; > + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>; > }; > > trackpad_int_l: trackpad-int-l { > - rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > > wifi: wifi { > wlan_module_reset_l: wlan-module-reset-l { > - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > }; > > bt_host_wake_l: bt-host-wake-l { > /* Kevin has an external pull up, but Gru does not */ > - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > > write-protect { > ap_fw_wp: ap-fw-wp { > - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > }; > diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi > index 4944d78a0a..e87a044774 100644 > --- a/arch/arm/dts/rk3399-khadas-edge.dtsi > +++ b/arch/arm/dts/rk3399-khadas-edge.dtsi > @@ -654,9 +654,12 @@ > sd-uhs-sdr104; > vqmmc-supply = <&vcc1v8_s3>; > vmmc-supply = <&vccio_sd>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "okay"; > > brcmf: wifi@1 { > + reg = <1>; > compatible = "brcm,bcm4329-fmac"; > interrupt-parent = <&gpio0>; > interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; > diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts > index 32baa57b94..73be38a537 100644 > --- a/arch/arm/dts/rk3399-leez-p710.dts > +++ b/arch/arm/dts/rk3399-leez-p710.dts > @@ -42,14 +42,14 @@ > regulator-max-microvolt = <5000000>; > }; > > - vcc5v0_sys: vcc5v0-sys { > + vcc3v3_lan: vcc3v3-lan { > compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > + regulator-name = "vcc3v3_lan"; > regulator-always-on; > regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc5v_adp>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vim-supply = <&vcc3v3_sys>; > }; > > vcc3v3_sys: vcc3v3-sys { > @@ -83,14 +83,14 @@ > vin-supply = <&vcc5v0_sys>; > }; > > - vcc3v3_lan: vcc3v3-lan { > + vcc5v0_sys: vcc5v0-sys { > compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_lan"; > + regulator-name = "vcc5v0_sys"; > regulator-always-on; > regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vim-supply = <&vcc3v3_sys>; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc5v_adp>; > }; > > vdd_log: vdd-log { > @@ -510,6 +510,14 @@ > }; > }; > > +&sdhci { > + bus-width = <8>; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + non-removable; > + status = "okay"; > +}; > + > &sdmmc { > bus-width = <4>; > cap-mmc-highspeed; > @@ -522,14 +530,6 @@ > status = "okay"; > }; > > -&sdhci { > - bus-width = <8>; > - mmc-hs400-1_8v; > - mmc-hs400-enhanced-strobe; > - non-removable; > - status = "okay"; > -}; > - > &tcphy0 { > status = "okay"; > }; > diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts > index 84433cf02b..e0d75617bb 100644 > --- a/arch/arm/dts/rk3399-nanopc-t4.dts > +++ b/arch/arm/dts/rk3399-nanopc-t4.dts > @@ -52,13 +52,58 @@ > pinctrl-names = "default"; > pinctrl-0 = <&ir_rx>; > }; > + > + fan: pwm-fan { > + compatible = "pwm-fan"; > + /* > + * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels > + * work out to 0, ~1200, ~3000, and 5000RPM respectively. > + */ > + cooling-levels = <0 12 18 255>; > + #cooling-cells = <2>; > + fan-supply = <&vcc12v0_sys>; > + pwms = <&pwm1 0 50000 0>; > + }; > +}; > + > +&cpu_thermal { > + trips { > + cpu_warm: cpu_warm { > + temperature = <55000>; > + hysteresis = <2000>; > + type = "active"; > + }; > + > + cpu_hot: cpu_hot { > + temperature = <65000>; > + hysteresis = <2000>; > + type = "active"; > + }; > + }; > + > + cooling-maps { > + map2 { > + trip = <&cpu_warm>; > + cooling-device = <&fan THERMAL_NO_LIMIT 1>; > + }; > + > + map3 { > + trip = <&cpu_hot>; > + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; > + }; > + }; > +}; > + > +&pcie0 { > + num-lanes = <4>; > + vpcie3v3-supply = <&vcc3v3_sys>; > }; > > &pinctrl { > ir { > ir_rx: ir-rx { > /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ > - rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; > + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; > }; > }; > }; > diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi > index d325e11728..c88018a0ef 100644 > --- a/arch/arm/dts/rk3399-nanopi4.dtsi > +++ b/arch/arm/dts/rk3399-nanopi4.dtsi > @@ -48,7 +48,7 @@ > }; > > /* switched by pmic_sleep */ > - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > + vcc1v8_s3: vcc1v8-s3 { > compatible = "regulator-fixed"; > regulator-always-on; > regulator-boot-on; > @@ -71,6 +71,27 @@ > vin-supply = <&vcc3v3_sys>; > }; > > + /* > + * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only > + * drives the enable pin, but we can't quite model that. > + */ > + vcca0v9_s3: vcca0v9-s3 { > + compatible = "regulator-fixed"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vcca0v9_s3"; > + vin-supply = <&vcc1v8_s3>; > + }; > + > + /* As above, actually supplied by vcc3v3_sys */ > + vcca1v8_s3: vcca1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_s3"; > + vin-supply = <&vcc1v8_s3>; > + }; > + > vbus_typec: vbus-typec { > compatible = "regulator-fixed"; > regulator-min-microvolt = <5000000>; > @@ -148,15 +169,28 @@ > assigned-clocks = <&cru SCLK_RMII_SRC>; > clock_in_out = "input"; > pinctrl-names = "default"; > - pinctrl-0 = <&rgmii_pins>; > + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; > + phy-handle = <&rtl8211e>; > phy-mode = "rgmii"; > phy-supply = <&vcc3v3_s3>; > - snps,reset-active-low; > - snps,reset-delays-us = <0 10000 50000>; > - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > tx_delay = <0x28>; > rx_delay = <0x11>; > status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + rtl8211e: phy@1 { > + reg = <1>; > + interrupt-parent = <&gpio3>; > + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; > + reset-assert-us = <10000>; > + reset-deassert-us = <30000>; > + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + }; > + }; > }; > > &gpu { > @@ -171,6 +205,10 @@ > status = "okay"; > }; > > +&hdmi_sound { > + status = "okay"; > +}; > + > &i2c0 { > clock-frequency = <400000>; > i2c-scl-rising-time-ns = <160>; > @@ -446,6 +484,10 @@ > status = "okay"; > }; > > +&i2s2 { > + status = "okay"; > +}; > + > &io_domains { > bt656-supply = <&vcc_1v8>; > audio-supply = <&vcca1v8_codec>; > @@ -464,7 +506,9 @@ > &pcie0 { > ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; > max-link-speed = <2>; > - num-lanes = <4>; > + num-lanes = <2>; > + vpcie0v9-supply = <&vcca0v9_s3>; > + vpcie1v8-supply = <&vcca1v8_s3>; > status = "okay"; > }; > > @@ -481,6 +525,16 @@ > }; > }; > > + phy { > + phy_intb: phy-intb { > + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + phy_rstb: phy-rstb { > + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > pmic { > cpu_b_sleep: cpu-b-sleep { > rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts > index cf37b96a6b..f9f7246d4d 100644 > --- a/arch/arm/dts/rk3399-orangepi.dts > +++ b/arch/arm/dts/rk3399-orangepi.dts > @@ -136,13 +136,13 @@ > vin-supply = <&vcc_sys>; > }; > > - vcc5v0_typec0: vcc5v0-typec0-regulator { > + vbus_typec: vbus-typec-regulator { > compatible = "regulator-fixed"; > enable-active-high; > gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_typec0_en>; > - regulator-name = "vcc5v0_typec0"; > + pinctrl-0 = <&vcc5v0_typec_en>; > + regulator-name = "vbus_typec"; > vin-supply = <&vcc_sys>; > }; > > @@ -202,14 +202,27 @@ > clock_in_out = "input"; > phy-supply = <&vcc3v3_s3>; > phy-mode = "rgmii"; > + phy-handle = <&rtl8211e>; > pinctrl-names = "default"; > - pinctrl-0 = <&rgmii_pins>; > - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - snps,reset-delays-us = <0 10000 50000>; > + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; > tx_delay = <0x28>; > rx_delay = <0x11>; > status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + rtl8211e: phy@1 { > + reg = <1>; > + interrupt-parent = <&gpio3>; > + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; > + reset-assert-us = <10000>; > + reset-deassert-us = <30000>; > + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + }; > + }; > }; > > &gpu { > @@ -419,6 +432,8 @@ > compatible = "silergy,syr827"; > reg = <0x40>; > fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&cpu_b_sleep>; > regulator-name = "vdd_cpu_b"; > regulator-min-microvolt = <712500>; > regulator-max-microvolt = <1500000>; > @@ -436,6 +451,8 @@ > compatible = "silergy,syr828"; > reg = <0x41>; > fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpu_sleep>; > regulator-name = "vdd_gpu"; > regulator-min-microvolt = <712500>; > regulator-max-microvolt = <1500000>; > @@ -472,6 +489,7 @@ > compatible = "asahi-kasei,ak09911"; > reg = <0x0c>; > vdd-supply = <&vcc3v3_s3>; > + vid-supply = <&vcc3v3_s3>; > }; > > mpu6500@68 { > @@ -504,6 +522,16 @@ > pinctrl-0 = <&light_int_l>; > vdd-supply = <&vcc3v3_s3>; > }; > + > + fusb302@22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + interrupt-parent = <&gpio1>; > + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&chg_cc_int_l>; > + vbus-supply = <&vbus_typec>; > + }; > }; > > &io_domains { > @@ -526,7 +554,25 @@ > }; > }; > > + phy { > + phy_intb: phy-intb { > + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + phy_rstb: phy-rstb { > + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > pmic { > + cpu_b_sleep: cpu-b-sleep { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + gpu_sleep: gpu-sleep { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > pmic_int_l: pmic-int-l { > rockchip,pins = > <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; > @@ -536,7 +582,7 @@ > sd { > sdmmc0_pwr_h: sdmmc0-pwr-h { > rockchip,pins = > - <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; > + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > @@ -546,7 +592,7 @@ > <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; > }; > > - vcc5v0_typec0_en: vcc5v0-typec0-en { > + vcc5v0_typec_en: vcc5v0-typec-en { > rockchip,pins = > <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > }; > @@ -595,6 +641,12 @@ > rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > + > + fusb302 { > + chg_cc_int_l: chg-cc-int-l { > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > }; > > &pwm0 { > @@ -631,9 +683,12 @@ > pinctrl-names = "default"; > pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; > sd-uhs-sdr104; > + #address-cells = <1>; > + #size-cells = <0>; > status = "okay"; > > brcmf: wifi@1 { > + reg = <1>; > compatible = "brcm,bcm4329-fmac"; > interrupt-parent = <&gpio0>; > interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; > @@ -676,7 +731,7 @@ > status = "okay"; > > u2phy0_otg: otg-port { > - phy-supply = <&vcc5v0_typec0>; > + phy-supply = <&vbus_typec>; > status = "okay"; > }; > > @@ -707,12 +762,14 @@ > bluetooth { > compatible = "brcm,bcm43438-bt"; > clocks = <&rk808 1>; > - clock-names = "ext_clock"; > + clock-names = "lpo"; > device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; > host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; > shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; > + vbat-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcc_1v8>; > }; > }; > > diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi > index e664779227..0253c6525f 100644 > --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi > @@ -13,7 +13,7 @@ > chosen { > stdout-path = "serial0:115200n8"; > u-boot,spl-boot-order = \ > - "same-as-spl", &spiflash, &sdhci, &sdmmc; > + "same-as-spl", &norflash, &sdhci, &sdmmc; > }; > > aliases { > @@ -21,10 +21,23 @@ > spi1 = &spi5; > }; > > -}; > - > -&bios_enable { > - u-boot,dm-pre-reloc; > + /* > + * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module > + * eMMC and SPI flash powered-down initially (in fact it keeps the > + * reset signal asserted). Even though it is an enable signal, we > + * model this as a regulator. > + */ > + bios_enable: bios_enable { > + compatible = "regulator-fixed"; > + u-boot,dm-pre-reloc; > + regulator-name = "bios_enable"; > + enable-active-high; > + gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > }; > > &gpio1 { > @@ -35,6 +48,6 @@ > u-boot,dm-pre-reloc; > }; > > -&spiflash { > +&norflash { > u-boot,dm-pre-reloc; > }; > diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi > index 246a892cb7..07694b196f 100644 > --- a/arch/arm/dts/rk3399-puma.dtsi > +++ b/arch/arm/dts/rk3399-puma.dtsi > @@ -1,30 +1,74 @@ > -// SPDX-License-Identifier: GPL-2.0+ OR X11 > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > /* > - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH > + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH > */ > > #include <dt-bindings/pwm/pwm.h> > #include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > > / { > - model = "Theobroma Systems RK3399-Q7 SoM"; > - compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399"; > - > leds { > compatible = "gpio-leds"; > pinctrl-names = "default"; > - pinctrl-0 = <&leds_pins_puma>; > + pinctrl-0 = <&led_pin_module>; > > - module_led { > + module-led { > label = "module_led"; > gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; > linux,default-trigger = "heartbeat"; > + panic-indicator; > }; > + }; > > - sd_card_led { > - label = "sd_card_led"; > - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "mmc0"; > + /* > + * Overwrite the opp-table for CPUB as this board uses a different > + * regulator (FAN53555) that only allows 10mV steps and therefore > + * can't reach the operation point target voltages from rk3399-opp.dtsi > + */ > + /delete-node/ opp-table1; > + cluster1_opp: opp-table1 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp00 { > + opp-hz = /bits/ 64 <408000000>; > + opp-microvolt = <800000>; > + clock-latency-ns = <40000>; > + }; > + opp01 { > + opp-hz = /bits/ 64 <600000000>; > + opp-microvolt = <800000>; > + }; > + opp02 { > + opp-hz = /bits/ 64 <816000000>; > + opp-microvolt = <830000>; > + opp-suspend; > + }; > + opp03 { > + opp-hz = /bits/ 64 <1008000000>; > + opp-microvolt = <880000>; > + }; > + opp04 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <950000>; > + }; > + opp05 { > + opp-hz = /bits/ 64 <1416000000>; > + opp-microvolt = <1030000>; > + }; > + opp06 { > + opp-hz = /bits/ 64 <1608000000>; > + opp-microvolt = <1100000>; > + }; > + opp07 { > + opp-hz = /bits/ 64 <1800000000>; > + opp-microvolt = <1200000>; > + }; > + opp08 { > + opp-hz = /bits/ 64 <1992000000>; > + opp-microvolt = <1230000>; > + turbo-mode; > }; > }; > > @@ -35,78 +79,14 @@ > #clock-cells = <0>; > }; > > - dw_hdmi_audio: dw-hdmi-audio { > - status = "enabled"; > - compatible = "rockchip,dw-hdmi-audio"; > - #sound-dai-cells = <0>; > - }; > - > - hdmi_codec: hdmi-codec { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,mclk-fs = <256>; > - simple-audio-card,name = "HDMI-CODEC"; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s2>; > - }; > - > - simple-audio-card,codec { > - sound-dai = <&hdmi>; > - }; > - }; > - > - hdmi_sound: hdmi-sound { > - status = "disabled"; > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,mclk-fs = <256>; > - simple-audio-card,name = "rockchip,hdmi"; > - > - simple-audio-card,cpu { > - sound-dai = <&i2s2>; > - }; > - simple-audio-card,codec { > - sound-dai = <&hdmi>; > - }; > - }; > - > - usbhub_enable: usbhub_enable { > + vcc1v2_phy: vcc1v2-phy { > compatible = "regulator-fixed"; > - regulator-name = "usbhub_enable"; > - enable-active-low; > - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&host_vbus_drv>; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - /* > - * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module > - * eMMC and SPI flash powered-down initially (in fact it keeps the > - * reset signal asserted). Even though it is an enable signal, we > - * model this as a regulator. > - */ > - bios_enable: bios_enable { > - compatible = "regulator-fixed"; > - regulator-name = "bios_enable"; > - enable-active-high; > - gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; > + regulator-name = "vcc1v2_phy"; > regulator-always-on; > regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - vccadc_ref: vccadc-ref { > - compatible = "regulator-fixed"; > - regulator-name = "vcc1v8_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + vin-supply = <&vcc5v0_sys>; > }; > > vcc3v3_sys: vcc3v3-sys { > @@ -116,16 +96,18 @@ > regulator-boot-on; > regulator-min-microvolt = <3300000>; > regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > }; > > - vcc5v0_otg: vcc5v0-otg-regulator { > + vcc5v0_host: vcc5v0-host-regulator { > compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; > + enable-active-low; > pinctrl-names = "default"; > - pinctrl-0 = <&otg_vbus_drv>; > - regulator-name = "vcc5v0_otg"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > regulator-always-on; > + vin-supply = <&vcc5v0_sys>; > }; > > vcc5v0_sys: vcc5v0-sys { > @@ -136,48 +118,55 @@ > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > }; > +}; > > - vcc_phy: vcc-phy-regulator { > - compatible = "regulator-fixed"; > - regulator-name = "vcc_phy"; > - regulator-always-on; > - regulator-boot-on; > - }; > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > > - vdd_log: vdd-log { > - compatible = "pwm-regulator"; > - pwms = <&pwm2 0 25000 1>; > - regulator-name = "vdd_log"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1400000>; > - regulator-always-on; > - regulator-boot-on; > - regulator-init-microvolt = <950000>; > - }; > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > }; > > &emmc_phy { > status = "okay"; > + drive-impedance-ohm = <33>; > }; > > &gmac { > - phy-supply = <&vcc_phy>; > - phy-mode = "rgmii"; > - clock_in_out = "input"; > - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - snps,reset-delays-us = <2 10000 50000>; > assigned-clocks = <&cru SCLK_RMII_SRC>; > assigned-clock-parents = <&clkin_gmac>; > + clock_in_out = "input"; > + phy-supply = <&vcc1v2_phy>; > + phy-mode = "rgmii"; > pinctrl-names = "default"; > pinctrl-0 = <&rgmii_pins>; > + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > tx_delay = <0x10>; > rx_delay = <0x10>; > status = "okay"; > }; > > -&hdmi { > - #sound-dai-cells = <0>; > +&gpu { > + mali-supply = <&vdd_gpu>; > status = "okay"; > }; > > @@ -187,37 +176,17 @@ > i2c-scl-falling-time-ns = <4>; > clock-frequency = <400000>; > > - vdd_gpu: vdd_gpu { > - status = "okay"; > - compatible = "fcs,fan53555"; > - reg = <0x60>; > - vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; > - vin-supply = <&vcc5v0_sys>; > - regulator-compatible = "fan53555-reg"; > - regulator-name = "vdd_gpu"; > - regulator-min-microvolt = <600000>; > - regulator-max-microvolt = <1230000>; > - regulator-ramp-delay = <1000>; > - fcs,suspend-voltage-selector = <1>; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-state = <3>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > rk808: pmic@1b { > compatible = "rockchip,rk808"; > reg = <0x1b>; > interrupt-parent = <&gpio1>; > - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt? > + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > pinctrl-names = "default"; > pinctrl-0 = <&pmic_int_l>; > rockchip,system-power-controller; > wakeup-source; > - #clock-cells = <1>; > - clock-output-names = "xin32k", "rk808-clkout2"; > > vcc1-supply = <&vcc5v0_sys>; > vcc2-supply = <&vcc5v0_sys>; > @@ -234,44 +203,44 @@ > > regulators { > vdd_center: DCDC_REG1 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vdd_center"; > regulator-min-microvolt = <750000>; > regulator-max-microvolt = <1350000>; > regulator-ramp-delay = <6001>; > - regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vdd_cpu_l: DCDC_REG2 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vdd_cpu_l"; > regulator-min-microvolt = <750000>; > regulator-max-microvolt = <1350000>; > regulator-ramp-delay = <6001>; > - regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > regulator-always-on; > regulator-boot-on; > - regulator-name = "vcc_ddr"; > regulator-state-mem { > regulator-on-in-suspend; > }; > }; > > vcc_1v8: DCDC_REG4 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vcc_1v8"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > - regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-on-in-suspend; > regulator-suspend-microvolt = <1800000>; > @@ -279,32 +248,32 @@ > }; > > vcc_ldo1: LDO_REG1 { > - regulator-boot-on; > + regulator-name = "vcc_ldo1"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > - regulator-name = "vcc_ldo1"; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc1v8_hdmi: LDO_REG2 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vcc1v8_hdmi"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > - regulator-name = "vcc1v8_hdmi"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc1v8_pmu: LDO_REG3 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vcc1v8_pmu"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > - regulator-name = "vcc1v8_pmu"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-on-in-suspend; > regulator-suspend-microvolt = <1800000>; > @@ -312,11 +281,11 @@ > }; > > vcc_sd: LDO_REG4 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vcc_sd"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <3000000>; > - regulator-name = "vcc_sd"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-on-in-suspend; > regulator-suspend-microvolt = <3000000>; > @@ -324,79 +293,105 @@ > }; > > vcc_ldo5: LDO_REG5 { > - regulator-boot-on; > + regulator-name = "vcc_ldo5"; > regulator-min-microvolt = <3000000>; > regulator-max-microvolt = <3000000>; > - regulator-name = "vcc_ldo5"; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc_ldo6: LDO_REG6 { > - regulator-boot-on; > + regulator-name = "vcc_ldo6"; > regulator-min-microvolt = <1500000>; > regulator-max-microvolt = <1500000>; > - regulator-name = "vcc_ldo6"; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc0v9_hdmi: LDO_REG7 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vcc0v9_hdmi"; > regulator-min-microvolt = <900000>; > regulator-max-microvolt = <900000>; > - regulator-name = "vcc0v9_hdmi"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc_efuse: LDO_REG8 { > - regulator-always-on; > - regulator-boot-on; > + regulator-name = "vcc_efuse"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > - regulator-name = "vcc_efuse"; > + regulator-always-on; > + regulator-boot-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc3v3_s3: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > regulator-always-on; > regulator-boot-on; > - regulator-name = "vcc3v3_s3"; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > > vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > regulator-always-on; > regulator-boot-on; > - regulator-name = "vcc3v3_s0"; > regulator-state-mem { > regulator-off-in-suspend; > }; > }; > }; > }; > + > + vdd_gpu: regulator@60 { > + compatible = "fcs,fan53555"; > + reg = <0x60>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_gpu"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1230000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > + clock-frequency = <400000>; > + > + fan: fan@18 { > + compatible = "ti,amc6821"; > + reg = <0x18>; > + #cooling-cells = <2>; > + }; > + > + rtc_twi: rtc@6f { > + compatible = "isil,isl1208"; > + reg = <0x6f>; > + }; > }; > > &i2c8 { > status = "okay"; > clock-frequency = <400000>; > > - vdd_cpu_b: vdd_cpu_b { > - status = "okay"; > + vdd_cpu_b: regulator@60 { > compatible = "fcs,fan53555"; > reg = <0x60>; > - vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; > vin-supply = <&vcc5v0_sys>; > - regulator-compatible = "fan53555-reg"; > regulator-name = "vdd_cpu_b"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <1230000>; > @@ -404,48 +399,36 @@ > fcs,suspend-voltage-selector = <1>; > regulator-always-on; > regulator-boot-on; > - regulator-initial-state = <3>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > }; > }; > > &i2s0 { > + pinctrl-0 = <&i2s0_2ch_bus>; > + rockchip,playback-channels = <2>; > + rockchip,capture-channels = <2>; > status = "okay"; > - rockchip,i2s-broken-burst-len; > - rockchip,playback-channels = <8>; > - rockchip,capture-channels = <8>; > - #sound-dai-cells = <0>; > }; > > -&i2s2 { > - #sound-dai-cells = <0>; > - status = "okay"; > +/* > + * As Q7 does not specify neither a global nor a RX clock for I2S these > + * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. > + * Therefore we have to redefine the i2s0_2ch_bus definition to prevent > + * conflicts. > + */ > +&i2s0_2ch_bus { > + rockchip,pins = > + <3 RK_PD0 1 &pcfg_pull_none>, > + <3 RK_PD2 1 &pcfg_pull_none>, > + <3 RK_PD3 1 &pcfg_pull_none>, > + <3 RK_PD7 1 &pcfg_pull_none>; > }; > > &io_domains { > status = "okay"; > - > - bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */ > - audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */ > - sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ > - gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */ > -}; > - > -&pcie0 { > - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; > - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; > - assigned-clock-rates = <100000000>; > - ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; > - num-lanes = <4>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_clkreqn>; > - status = "okay"; > -}; > - > -&pcie_phy { > - status = "okay"; > + bt656-supply = <&vcc_1v8>; > + audio-supply = <&vcc_1v8>; > + sdmmc-supply = <&vcc_sd>; > + gpio1830-supply = <&vcc_1v8>; > }; > > &pmu_io_domains { > @@ -453,185 +436,99 @@ > pmu1830-supply = <&vcc_1v8>; > }; > > -&pwm0 { > - status = "okay"; > -}; > - > &pwm2 { > status = "okay"; > }; > > -&sdhci { > - bus-width = <8>; > - mmc-hs400-1_8v; > - supports-emmc; > - non-removable; > - keep-power-in-suspend; > - mmc-hs400-enhanced-strobe; > - status = "okay"; > -}; > - > -&sdmmc { > - clock-frequency = <150000000>; > - max-frequency = <40000000>; > - supports-sd; > - bus-width = <4>; > - cap-mmc-highspeed; > - cap-sd-highspeed; > - disable-wp; > - num-slots = <1>; > - vqmmc-supply = <&vcc_sd>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "disabled"; > -}; > - > -&usb_host0_ohci { > - status = "disabled"; > -}; > - > -&usbdrd3_0 { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "disabled"; > -}; > - > -&usb_host1_ohci { > - status = "disabled"; > -}; > - > -&usbdrd3_1 { > - status = "okay"; > - tsd,usb-port-power = "usbhub_enable"; > -}; > - > -&vopb { > - status = "okay"; > -}; > - > &pinctrl { > - /* Pins that are not explicitely used by any devices */ > - pinctrl-names = "default"; > - pinctrl-0 = <&puma_pin_hog>; > - > - hog { > - puma_pin_hog: puma_pin_hog { > + i2c8 { > + i2c8_xfer_a: i2c8-xfer { > rockchip,pins = > - /* We need pull-ups on Q7 buttons */ > - <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */ > - <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ > - <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ > - <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */ > + <1 RK_PC4 1 &pcfg_pull_up>, > + <1 RK_PC5 1 &pcfg_pull_up>; > }; > }; > > - pmic { > - pmic_int_l: pmic-int-l { > + leds { > + led_pin_module: led-module-gpio { > rockchip,pins = > - <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; > + <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > - leds_pins_puma: led_pins@0 { > - rockchip,pins = > - <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>, > - <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - usb2 { > - otg_vbus_drv: otg-vbus-drv { > - rockchip,pins = > - <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - host_vbus_drv: host-vbus-drv { > + pmic { > + pmic_int_l: pmic-int-l { > rockchip,pins = > - <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > > - i2c8 { > - i2c8_xfer_a: i2c8-xfer { > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > rockchip,pins = > - <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, > - <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; > + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > }; > > -&i2c1 { > +&sdhci { > + bus-width = <8>; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + non-removable; > status = "okay"; > - clock-frequency = <400000>; > }; > -&i2c2 { > - status = "okay"; > - clock-frequency = <400000>; > + > +&sdmmc { > + vqmmc-supply = <&vcc_sd>; > }; > -&i2c4 { > + > +&spi1 { > status = "okay"; > - clock-frequency = <400000>; > + > + norflash: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <50000000>; > + }; > }; > -&i2c6 { > + > +&tcphy1 { > status = "okay"; > - clock-frequency = <400000>; > }; > > -&i2c6_xfer { > - /* Enable pull-ups, the pins would float otherwise. */ > - rockchip,pins = > - <RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>, > - <RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>; > +&tsadc { > + rockchip,hw-tshut-mode = <1>; > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > }; > > -&i2c7 { > +&u2phy1 { > status = "okay"; > - clock-frequency = <400000>; > > - rtc_twi: rtc@6f { > - compatible = "isil,isl1208"; > - reg = <0x6f>; > + u2phy1_otg: otg-port { > + status = "okay"; > }; > - fan: fan@18 { > - compatible = "ti,amc6821"; > - reg = <0x18>; > - cooling-min-state = <0>; > - cooling-max-state = <9>; > - #cooling-cells = <2>; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > }; > }; > > -&uart0 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart0_xfer &uart0_cts>; > +&usbdrd3_1 { > status = "okay"; > }; > > - > -&spi1 { > +&usbdrd_dwc3_1 { > status = "okay"; > + dr_mode = "host"; > +}; > > - #address-cells = <1>; > - #size-cells = <0>; > - > - spiflash: w25q32dw@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <49500000>; > - spi-cpol; > - spi-cpha; > - }; > +&usb_host1_ehci { > + status = "okay"; > }; > > -&spi5 { > +&usb_host1_ohci { > status = "okay"; > }; > diff --git a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi > index 5746442981..141dd0b306 100644 > --- a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi > @@ -14,9 +14,45 @@ > chosen { > u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; > }; > + > + vcc_hub_en: vcc_hub_en-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hub_rst>; > + regulator-name = "vcc_hub_en"; > + regulator-always-on; > + }; > +}; > + > +/* > + * should be placed inside mp8859, but not until mp8859 has > + * its own dt-binding. > + */ > +&dc_12v { > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + vin-supply = <&vcc_vbus_typec0>; > }; > > &vdd_log { > regulator-min-microvolt = <430000>; > regulator-init-microvolt = <950000>; > }; > + > +&vcc5v0_host { > + regulator-always-on; > +}; > + > +&vcc_sys { > + regulator-always-on; > +}; > + > +&vcc_sdio { > + regulator-always-on; > +}; > diff --git a/arch/arm/dts/rk3399-roc-pc.dts b/arch/arm/dts/rk3399-roc-pc.dts > index 6a909e4eef..cd41954253 100644 > --- a/arch/arm/dts/rk3399-roc-pc.dts > +++ b/arch/arm/dts/rk3399-roc-pc.dts > @@ -8,6 +8,5 @@ > > / { > model = "Firefly ROC-RK3399-PC Board"; > - compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc", > - "rockchip,rk3399"; > + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; > }; > diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi > index 9a1ce3a4ae..9f225e9c3d 100644 > --- a/arch/arm/dts/rk3399-roc-pc.dtsi > +++ b/arch/arm/dts/rk3399-roc-pc.dtsi > @@ -110,20 +110,6 @@ > regulator-max-microvolt = <5000000>; > }; > > - /* > - * should be placed inside mp8859, but not until mp8859 has > - * its own dt-binding. > - */ > - dc_12v: mp8859-dcdc1 { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - vin-supply = <&vcc_vbus_typec0>; > - }; > - > /* switched by pmic_sleep */ > vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > compatible = "regulator-fixed"; > @@ -176,7 +162,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&vcc5v0_host_en &hub_rst>; > regulator-name = "vcc5v0_host"; > - regulator-always-on; > vin-supply = <&vcc_sys>; > }; > > @@ -198,7 +183,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&vcc_sys_en>; > regulator-name = "vcc_sys"; > - regulator-always-on; > regulator-boot-on; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > @@ -392,7 +376,6 @@ > > vcc_sdio: LDO_REG4 { > regulator-name = "vcc_sdio"; > - regulator-always-on; > regulator-boot-on; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <3000000>; > @@ -549,6 +532,24 @@ > vbus-supply = <&vcc_vbus_typec0>; > status = "okay"; > }; > + > + mp8859: regulator@66 { > + compatible = "mps,mp8859"; > + reg = <0x66>; > + dc_12v: mp8859_dcdc { > + regulator-name = "dc_12v"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_vbus_typec0>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <12000000>; > + }; > + }; > + }; > }; > > &i2s0 { > diff --git a/arch/arm/dts/rk3399-rock-pi-4.dts b/arch/arm/dts/rk3399-rock-pi-4.dts > index 4a543f2117..3923ec01ef 100644 > --- a/arch/arm/dts/rk3399-rock-pi-4.dts > +++ b/arch/arm/dts/rk3399-rock-pi-4.dts > @@ -25,6 +25,15 @@ > #clock-cells = <0>; > }; > > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h>; > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > vcc12v_dcin: dc-12v { > compatible = "regulator-fixed"; > regulator-name = "vcc12v_dcin"; > @@ -44,6 +53,16 @@ > vin-supply = <&vcc12v_dcin>; > }; > > + vcc_0v9: vcc-0v9 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_0v9"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > vcc3v3_pcie: vcc3v3-pcie-regulator { > compatible = "regulator-fixed"; > enable-active-high; > @@ -157,12 +176,22 @@ > status = "okay"; > }; > > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > &hdmi { > + ddc-i2c-bus = <&i2c3>; > pinctrl-names = "default"; > pinctrl-0 = <&hdmi_cec>; > status = "okay"; > }; > > +&hdmi_sound { > + status = "okay"; > +}; > + > &i2c0 { > clock-frequency = <400000>; > i2c-scl-rising-time-ns = <168>; > @@ -444,13 +473,60 @@ > pmu1830-supply = <&vcc_3v0>; > }; > > +&pcie_phy { > + status = "okay"; > +}; > + > +&pcie0 { > + ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; > + max-link-speed = <2>; > + num-lanes = <4>; > + pinctrl-0 = <&pcie_clkreqnb_cpm>; > + pinctrl-names = "default"; > + vpcie0v9-supply = <&vcc_0v9>; > + vpcie1v8-supply = <&vcc_1v8>; > + vpcie3v3-supply = <&vcc3v3_pcie>; > + status = "okay"; > +}; > + > &pinctrl { > + bt { > + bt_enable_h: bt-enable-h { > + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_host_wake_l: bt-host-wake-l { > + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_wake_l: bt-wake-l { > + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > pcie { > pcie_pwr_en: pcie-pwr-en { > rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > > + sdio0 { > + sdio0_bus4: sdio0-bus4 { > + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, > + <2 RK_PC5 1 &pcfg_pull_up_20ma>, > + <2 RK_PC6 1 &pcfg_pull_up_20ma>, > + <2 RK_PC7 1 &pcfg_pull_up_20ma>; > + }; > + > + sdio0_cmd: sdio0-cmd { > + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>; > + }; > + > + sdio0_clk: sdio0-clk { > + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>; > + }; > + }; > + > pmic { > pmic_int_l: pmic-int-l { > rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; > @@ -476,6 +552,16 @@ > rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; > }; > }; > + > + wifi { > + wifi_enable_h: wifi-enable-h { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + wifi_host_wake_l: wifi-host-wake-l { > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > }; > > &pwm2 { > @@ -488,6 +574,32 @@ > vref-supply = <&vcc_1v8>; > }; > > +&sdio0 { > + #address-cells = <1>; > + #size-cells = <0>; > + bus-width = <4>; > + clock-frequency = <50000000>; > + cap-sdio-irq; > + cap-sd-highspeed; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; > + sd-uhs-sdr104; > + status = "okay"; > + > + brcmf: wifi@1 { > + compatible = "brcm,bcm4329-fmac"; > + reg = <1>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; > + interrupt-names = "host-wake"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_host_wake_l>; > + }; > +}; > + > &sdmmc { > bus-width = <4>; > cap-mmc-highspeed; > @@ -551,6 +663,23 @@ > }; > }; > > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; > + status = "okay"; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; > + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > + }; > +}; > + > &uart2 { > status = "okay"; > }; > diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts > index 12285c51cc..437a75f31a 100644 > --- a/arch/arm/dts/rk3399-rock960.dts > +++ b/arch/arm/dts/rk3399-rock960.dts > @@ -114,6 +114,55 @@ > }; > }; > > +&spi0 { > + /* On Low speed expansion (LS-SPI0) */ > + status = "okay"; > +}; > + > +&spi4 { > + /* On High speed expansion (HS-SPI1) */ > + status = "okay"; > +}; > + > +&thermal_zones { > + cpu_thermal: cpu { > + polling-delay-passive = <100>; > + polling-delay = <1000>; > + thermal-sensors = <&tsadc 0>; > + sustainable-power = <1550>; > + > + trips { > + cpu_alert0: cpu_alert0 { > + temperature = <65000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu_alert1: cpu_alert1 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu_crit: cpu_crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + > + trip = <&cpu_alert1>; > + cooling-device = > + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > +}; > + > &usbdrd_dwc3_0 { > dr_mode = "otg"; > }; > diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi > index c7d48d41e1..ba7c75c9f2 100644 > --- a/arch/arm/dts/rk3399-rock960.dtsi > +++ b/arch/arm/dts/rk3399-rock960.dtsi > @@ -76,6 +76,15 @@ > regulator-always-on; > vin-supply = <&vcc5v0_sys>; > }; > + > + vcc_0v9: vcc-0v9 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_0v9"; > + regulator-always-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + vin-supply = <&vcc3v3_sys>; > + }; > }; > > &cpu_l0 { > @@ -384,6 +393,8 @@ > num-lanes = <4>; > pinctrl-names = "default"; > pinctrl-0 = <&pcie_clkreqn_cpm>; > + vpcie0v9-supply = <&vcc_0v9>; > + vpcie1v8-supply = <&vcca_1v8>; > vpcie3v3-supply = <&vcc3v3_pcie>; > status = "okay"; > }; > @@ -531,7 +542,7 @@ > cap-mmc-highspeed; > cap-sd-highspeed; > clock-frequency = <100000000>; > - clock-freq-min-max = <100000 100000000>; > + max-frequency = <100000000>; > cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > disable-wp; > sd-uhs-sdr104; > diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts > index e544deb61d..4b42717800 100644 > --- a/arch/arm/dts/rk3399-rockpro64.dts > +++ b/arch/arm/dts/rk3399-rockpro64.dts > @@ -2,752 +2,29 @@ > /* > * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> > + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> > */ > > /dts-v1/; > -#include <dt-bindings/input/linux-event-codes.h> > -#include <dt-bindings/pwm/pwm.h> > -#include "rk3399.dtsi" > -#include "rk3399-opp.dtsi" > +#include "rk3399-rockpro64.dtsi" > > / { > - model = "Pine64 RockPro64"; > - compatible = "pine64,rockpro64", "rockchip,rk3399"; > - > - chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - clkin_gmac: external-gmac-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "clkin_gmac"; > - #clock-cells = <0>; > - }; > - > - gpio-keys { > - compatible = "gpio-keys"; > - autorepeat; > - pinctrl-names = "default"; > - pinctrl-0 = <&pwrbtn>; > - > - power { > - debounce-interval = <100>; > - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > - label = "GPIO Key Power"; > - linux,code = <KEY_POWER>; > - wakeup-source; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; > - > - work-led { > - label = "work"; > - default-state = "on"; > - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > - }; > - > - diy-led { > - label = "diy"; > - default-state = "off"; > - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > - }; > - }; > - > - fan: pwm-fan { > - compatible = "pwm-fan"; > - #cooling-cells = <2>; > - fan-supply = <&vcc12v_dcin>; > - pwms = <&pwm1 0 50000 0>; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk808 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - > - /* > - * On the module itself this is one of these (depending > - * on the actual card populated): > - * - SDIO_RESET_L_WL_REG_ON > - * - PDN (power down when low) > - */ > - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > - }; > - > - vcc12v_dcin: vcc12v-dcin { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - /* switched by pmic_sleep */ > - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > - compatible = "regulator-fixed"; > - regulator-name = "vcc1v8_s3"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_pwr_en>; > - regulator-name = "vcc3v3_pcie"; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc3v3_sys: vcc3v3-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > - vcc5v0_host: vcc5v0-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_host_en>; > - regulator-name = "vcc5v0_host"; > - regulator-always-on; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_typec: vcc5v0-typec-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_typec_en>; > - regulator-name = "vcc5v0_typec"; > - regulator-always-on; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_sys: vcc5v0-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_usb: vcc5v0-usb { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vdd_log: vdd-log { > - compatible = "pwm-regulator"; > - pwms = <&pwm2 0 25000 1>; > - regulator-name = "vdd_log"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1700000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&cpu_l0 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_l1 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_l2 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_l3 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_b0 { > - cpu-supply = <&vdd_cpu_b>; > -}; > - > -&cpu_b1 { > - cpu-supply = <&vdd_cpu_b>; > -}; > - > -&emmc_phy { > - status = "okay"; > -}; > - > -&gmac { > - assigned-clocks = <&cru SCLK_RMII_SRC>; > - assigned-clock-parents = <&clkin_gmac>; > - clock_in_out = "input"; > - phy-supply = <&vcc_lan>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&rgmii_pins>; > - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - snps,reset-delays-us = <0 10000 50000>; > - tx_delay = <0x28>; > - rx_delay = <0x11>; > - status = "okay"; > -}; > - > -&hdmi { > - ddc-i2c-bus = <&i2c3>; > - pinctrl-names = "default"; > - pinctrl-0 = <&hdmi_cec>; > - status = "okay"; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&i2c0 { > - clock-frequency = <400000>; > - i2c-scl-rising-time-ns = <168>; > - i2c-scl-falling-time-ns = <4>; > - status = "okay"; > - > - rk808: pmic@1b { > - compatible = "rockchip,rk808"; > - reg = <0x1b>; > - interrupt-parent = <&gpio3>; > - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - clock-output-names = "xin32k", "rk808-clkout2"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc5v0_sys>; > - vcc2-supply = <&vcc5v0_sys>; > - vcc3-supply = <&vcc5v0_sys>; > - vcc4-supply = <&vcc5v0_sys>; > - vcc6-supply = <&vcc5v0_sys>; > - vcc7-supply = <&vcc5v0_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc5v0_sys>; > - vcc10-supply = <&vcc5v0_sys>; > - vcc11-supply = <&vcc5v0_sys>; > - vcc12-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcca_1v8>; > - > - regulators { > - vdd_center: DCDC_REG1 { > - regulator-name = "vdd_center"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <750000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_cpu_l: DCDC_REG2 { > - regulator-name = "vdd_cpu_l"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <750000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG4 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG1 { > - regulator-name = "vcc1v8_dvp"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v0_touch: LDO_REG2 { > - regulator-name = "vcc3v0_touch"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca_1v8: LDO_REG3 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcc_sdio: LDO_REG4 { > - regulator-name = "vcc_sdio"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3000000>; > - }; > - }; > - > - vcca3v0_codec: LDO_REG5 { > - regulator-name = "vcca3v0_codec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v5: LDO_REG6 { > - regulator-name = "vcc_1v5"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1500000>; > - regulator-max-microvolt = <1500000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1500000>; > - }; > - }; > - > - vcca1v8_codec: LDO_REG7 { > - regulator-name = "vcca1v8_codec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v0: LDO_REG8 { > - regulator-name = "vcc_3v0"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3000000>; > - }; > - }; > - > - vcc3v3_s3: vcc_lan: SWITCH_REG1 { > - regulator-name = "vcc3v3_s3"; > - regulator-always-on; > - regulator-boot-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_s0: SWITCH_REG2 { > - regulator-name = "vcc3v3_s0"; > - regulator-always-on; > - regulator-boot-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > - > - vdd_cpu_b: regulator@40 { > - compatible = "silergy,syr827"; > - reg = <0x40>; > - fcs,suspend-voltage-selector = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vsel1_gpio>; > - regulator-name = "vdd_cpu_b"; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1500000>; > - regulator-ramp-delay = <1000>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: regulator@41 { > - compatible = "silergy,syr828"; > - reg = <0x41>; > - fcs,suspend-voltage-selector = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vsel2_gpio>; > - regulator-name = "vdd_gpu"; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1500000>; > - regulator-ramp-delay = <1000>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > + model = "Pine64 RockPro64 v2.1"; > + compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399"; > }; > > &i2c1 { > - i2c-scl-rising-time-ns = <300>; > - i2c-scl-falling-time-ns = <15>; > - status = "okay"; > -}; > - > -&i2c3 { > - i2c-scl-rising-time-ns = <450>; > - i2c-scl-falling-time-ns = <15>; > - status = "okay"; > -}; > - > -&i2c4 { > - i2c-scl-rising-time-ns = <600>; > - i2c-scl-falling-time-ns = <20>; > - status = "okay"; > - > - fusb0: typec-portc@22 { > - compatible = "fcs,fusb302"; > - reg = <0x22>; > - interrupt-parent = <&gpio1>; > - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&fusb0_int>; > - vbus-supply = <&vcc5v0_typec>; > - status = "okay"; > - }; > -}; > + es8316: codec@11 { > + compatible = "everest,es8316"; > + reg = <0x11>; > + clocks = <&cru SCLK_I2S_8CH_OUT>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > > -&i2s0 { > - rockchip,playback-channels = <8>; > - rockchip,capture-channels = <8>; > - status = "okay"; > -}; > - > -&i2s1 { > - rockchip,playback-channels = <2>; > - rockchip,capture-channels = <2>; > - status = "okay"; > -}; > - > -&i2s2 { > - status = "okay"; > -}; > - > -&io_domains { > - status = "okay"; > - > - bt656-supply = <&vcc1v8_dvp>; > - audio-supply = <&vcc_3v0>; > - sdmmc-supply = <&vcc_sdio>; > - gpio1830-supply = <&vcc_3v0>; > -}; > - > -&pcie0 { > - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; > - num-lanes = <4>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_perst>; > - vpcie12v-supply = <&vcc12v_dcin>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie_phy { > - status = "okay"; > -}; > - > -&pmu_io_domains { > - pmu1830-supply = <&vcc_3v0>; > - status = "okay"; > -}; > - > -&pinctrl { > - buttons { > - pwrbtn: pwrbtn { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - fusb302x { > - fusb0_int: fusb0-int { > - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - leds { > - work_led_gpio: work_led-gpio { > - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - diy_led_gpio: diy_led-gpio { > - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_perst: pcie-perst { > - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_pwr_en: pcie-pwr-en { > - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - > - vsel1_gpio: vsel1-gpio { > - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - vsel2_gpio: vsel2-gpio { > - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb-typec { > - vcc5v0_typec_en: vcc5v0_typec_en { > - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb2 { > - vcc5v0_host_en: vcc5v0-host-en { > - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > + port { > + es8316_p0_0: endpoint { > + remote-endpoint = <&i2s1_p0_0>; > + }; > }; > }; > }; > - > -&pwm0 { > - status = "okay"; > -}; > - > -&pwm1 { > - status = "okay"; > -}; > - > -&pwm2 { > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca1v8_s3>; > - status = "okay"; > -}; > - > -&sdmmc { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > - disable-wp; > - max-frequency = <150000000>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - status = "okay"; > -}; > - > -&spi1 { > - status = "okay"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <10000000>; > - }; > -}; > - > -&tcphy0 { > - status = "okay"; > -}; > - > -&tcphy1 { > - status = "okay"; > -}; > - > -&tsadc { > - /* tshut mode 0:CRU 1:GPIO */ > - rockchip,hw-tshut-mode = <1>; > - /* tshut polarity 0:LOW 1:HIGH */ > - rockchip,hw-tshut-polarity = <1>; > - status = "okay"; > -}; > - > -&u2phy0 { > - status = "okay"; > - > - u2phy0_otg: otg-port { > - status = "okay"; > - }; > - > - u2phy0_host: host-port { > - phy-supply = <&vcc5v0_host>; > - status = "okay"; > - }; > -}; > - > -&u2phy1 { > - status = "okay"; > - > - u2phy1_otg: otg-port { > - status = "okay"; > - }; > - > - u2phy1_host: host-port { > - phy-supply = <&vcc5v0_host>; > - status = "okay"; > - }; > -}; > - > -&uart0 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart0_xfer &uart0_cts>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usbdrd3_0 { > - status = "okay"; > -}; > - > -&usbdrd_dwc3_0 { > - status = "okay"; > - dr_mode = "otg"; > -}; > - > -&usbdrd3_1 { > - status = "okay"; > -}; > - > -&usbdrd_dwc3_1 { > - status = "okay"; > - dr_mode = "host"; > -}; > - > -&vopb { > - status = "okay"; > -}; > - > -&vopb_mmu { > - status = "okay"; > -}; > - > -&vopl { > - status = "okay"; > -}; > - > -&vopl_mmu { > - status = "okay"; > -}; > diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi > new file mode 100644 > index 0000000000..9bca258012 > --- /dev/null > +++ b/arch/arm/dts/rk3399-rockpro64.dtsi > @@ -0,0 +1,797 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> > + */ > + > +#include <dt-bindings/input/linux-event-codes.h> > +#include <dt-bindings/pwm/pwm.h> > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + autorepeat; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrbtn>; > + > + power { > + debounce-interval = <100>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "GPIO Key Power"; > + linux,code = <KEY_POWER>; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; > + > + work-led { > + label = "work"; > + default-state = "on"; > + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > + }; > + > + diy-led { > + label = "diy"; > + default-state = "off"; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + fan: pwm-fan { > + compatible = "pwm-fan"; > + #cooling-cells = <2>; > + fan-supply = <&vcc12v_dcin>; > + pwms = <&pwm1 0 50000 0>; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h>; > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + sound { > + compatible = "audio-graph-card"; > + label = "rockchip,rk3399"; > + dais = <&i2s1_p0>; > + }; > + > + vcc12v_dcin: vcc12v-dcin { > + compatible = "regulator-fixed"; > + regulator-name = "vcc12v_dcin"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + /* switched by pmic_sleep */ > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; > + > + vcc3v3_pcie: vcc3v3-pcie-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_pwr_en>; > + regulator-name = "vcc3v3_pcie"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + vin-supply = <&vcc5v0_usb>; > + }; > + > + vcc5v0_typec: vcc5v0-typec-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_typec_en>; > + regulator-name = "vcc5v0_typec"; > + regulator-always-on; > + vin-supply = <&vcc5v0_usb>; > + }; > + > + vcc5v0_sys: vcc5v0-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vcc5v0_usb: vcc5v0-usb { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_usb"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1700000>; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gmac { > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + assigned-clock-parents = <&clkin_gmac>; > + clock_in_out = "input"; > + phy-supply = <&vcc_lan>; > + phy-mode = "rgmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + tx_delay = <0x28>; > + rx_delay = <0x11>; > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_cec>; > + status = "okay"; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio3>; > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc5v0_sys>; > + vcc12-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcca_1v8>; > + > + regulators { > + vdd_center: DCDC_REG1 { > + regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc1v8_dvp: LDO_REG1 { > + regulator-name = "vcc1v8_dvp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v0_touch: LDO_REG2 { > + regulator-name = "vcc3v0_touch"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca_1v8: LDO_REG3 { > + regulator-name = "vcca_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio: LDO_REG4 { > + regulator-name = "vcc_sdio"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-name = "vcca1v8_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: vcc_lan: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel1_gpio>; > + regulator-name = "vdd_cpu_b"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator@41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel2_gpio>; > + regulator-name = "vdd_gpu"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c1 { > + i2c-scl-rising-time-ns = <300>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +&i2c3 { > + i2c-scl-rising-time-ns = <450>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +&i2c4 { > + i2c-scl-rising-time-ns = <600>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + > + fusb0: typec-portc@22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + interrupt-parent = <&gpio1>; > + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&fusb0_int>; > + vbus-supply = <&vcc5v0_typec>; > + status = "okay"; > + }; > +}; > + > +&i2s0 { > + rockchip,playback-channels = <8>; > + rockchip,capture-channels = <8>; > + status = "okay"; > +}; > + > +&i2s1 { > + rockchip,playback-channels = <2>; > + rockchip,capture-channels = <2>; > + status = "okay"; > + > + i2s1_p0: port { > + i2s1_p0_0: endpoint { > + dai-format = "i2s"; > + mclk-fs = <256>; > + remote-endpoint = <&es8316_p0_0>; > + }; > + }; > +}; > + > +&i2s2 { > + status = "okay"; > +}; > + > +&io_domains { > + status = "okay"; > + > + bt656-supply = <&vcc1v8_dvp>; > + audio-supply = <&vcc_3v0>; > + sdmmc-supply = <&vcc_sdio>; > + gpio1830-supply = <&vcc_3v0>; > +}; > + > +&pcie0 { > + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; > + num-lanes = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_perst>; > + vpcie12v-supply = <&vcc12v_dcin>; > + vpcie3v3-supply = <&vcc3v3_pcie>; > + status = "okay"; > +}; > + > +&pcie_phy { > + status = "okay"; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc_3v0>; > + status = "okay"; > +}; > + > +&pinctrl { > + bt { > + bt_enable_h: bt-enable-h { > + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_host_wake_l: bt-host-wake-l { > + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + bt_wake_l: bt-wake-l { > + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + buttons { > + pwrbtn: pwrbtn { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + fusb302x { > + fusb0_int: fusb0-int { > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + leds { > + work_led_gpio: work_led-gpio { > + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + diy_led_gpio: diy_led-gpio { > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pcie { > + pcie_perst: pcie-perst { > + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + pcie_pwr_en: pcie-pwr-en { > + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + vsel1_gpio: vsel1-gpio { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel2_gpio: vsel2-gpio { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + sdio-pwrseq { > + wifi_enable_h: wifi-enable-h { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb-typec { > + vcc5v0_typec_en: vcc5v0_typec_en { > + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca1v8_s3>; > + status = "okay"; > +}; > + > +&sdio0 { > + bus-width = <4>; > + cap-sd-highspeed; > + cap-sdio-irq; > + disable-wp; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; > + sd-uhs-sdr104; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > + disable-wp; > + max-frequency = <150000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs200-1_8v; > + non-removable; > + status = "okay"; > +}; > + > +&spi1 { > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <10000000>; > + }; > +}; > + > +&tcphy0 { > + status = "okay"; > +}; > + > +&tcphy1 { > + status = "okay"; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > + > + u2phy0_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy0_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&u2phy1 { > + status = "okay"; > + > + u2phy1_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; > + status = "okay"; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + clocks = <&rk808 1>; > + clock-names = "lpo"; > + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; > + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > + vbat-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcc_1v8>; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + status = "okay"; > + dr_mode = "otg"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > + status = "okay"; > +}; > + > +&vopl { > + status = "okay"; > +}; > + > +&vopl_mmu { > + status = "okay"; > +}; > diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi > index 8b857ccfc7..ef57c36e73 100644 > --- a/arch/arm/dts/rk3399-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-u-boot.dtsi > @@ -79,6 +79,7 @@ > }; > > &sdhci { > + max-frequency = <200000000>; > u-boot,dm-pre-reloc; > }; > > diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi > index 6b7c136ab8..74f2c3d490 100644 > --- a/arch/arm/dts/rk3399.dtsi > +++ b/arch/arm/dts/rk3399.dtsi > @@ -1,6 +1,6 @@ > -// SPDX-License-Identifier: GPL-2.0+ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > /* > - * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd. > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd > */ > > #include <dt-bindings/clock/rk3399-cru.h> > @@ -19,6 +19,7 @@ > #size-cells = <2>; > > aliases { > + ethernet0 = &gmac; > i2c0 = &i2c0; > i2c1 = &i2c1; > i2c2 = &i2c2; > @@ -67,53 +68,102 @@ > > cpu_l0: cpu@0 { > device_type = "cpu"; > - compatible = "arm,cortex-a53", "arm,armv8"; > + compatible = "arm,cortex-a53"; > reg = <0x0 0x0>; > enable-method = "psci"; > - #cooling-cells = <2>; /* min followed by max */ > + capacity-dmips-mhz = <485>; > clocks = <&cru ARMCLKL>; > + #cooling-cells = <2>; /* min followed by max */ > + dynamic-power-coefficient = <100>; > + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; > }; > > cpu_l1: cpu@1 { > device_type = "cpu"; > - compatible = "arm,cortex-a53", "arm,armv8"; > + compatible = "arm,cortex-a53"; > reg = <0x0 0x1>; > enable-method = "psci"; > + capacity-dmips-mhz = <485>; > clocks = <&cru ARMCLKL>; > + #cooling-cells = <2>; /* min followed by max */ > + dynamic-power-coefficient = <100>; > + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; > }; > > cpu_l2: cpu@2 { > device_type = "cpu"; > - compatible = "arm,cortex-a53", "arm,armv8"; > + compatible = "arm,cortex-a53"; > reg = <0x0 0x2>; > enable-method = "psci"; > + capacity-dmips-mhz = <485>; > clocks = <&cru ARMCLKL>; > + #cooling-cells = <2>; /* min followed by max */ > + dynamic-power-coefficient = <100>; > + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; > }; > > cpu_l3: cpu@3 { > device_type = "cpu"; > - compatible = "arm,cortex-a53", "arm,armv8"; > + compatible = "arm,cortex-a53"; > reg = <0x0 0x3>; > enable-method = "psci"; > + capacity-dmips-mhz = <485>; > clocks = <&cru ARMCLKL>; > + #cooling-cells = <2>; /* min followed by max */ > + dynamic-power-coefficient = <100>; > + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; > }; > > cpu_b0: cpu@100 { > device_type = "cpu"; > - compatible = "arm,cortex-a72", "arm,armv8"; > + compatible = "arm,cortex-a72"; > reg = <0x0 0x100>; > enable-method = "psci"; > - #cooling-cells = <2>; /* min followed by max */ > + capacity-dmips-mhz = <1024>; > clocks = <&cru ARMCLKB>; > + #cooling-cells = <2>; /* min followed by max */ > + dynamic-power-coefficient = <436>; > + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; > }; > > cpu_b1: cpu@101 { > device_type = "cpu"; > - compatible = "arm,cortex-a72", "arm,armv8"; > + compatible = "arm,cortex-a72"; > reg = <0x0 0x101>; > enable-method = "psci"; > + capacity-dmips-mhz = <1024>; > clocks = <&cru ARMCLKB>; > + #cooling-cells = <2>; /* min followed by max */ > + dynamic-power-coefficient = <436>; > + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; > }; > + > + idle-states { > + entry-method = "psci"; > + > + CPU_SLEEP: cpu-sleep { > + compatible = "arm,idle-state"; > + local-timer-stop; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <120>; > + exit-latency-us = <250>; > + min-residency-us = <900>; > + }; > + > + CLUSTER_SLEEP: cluster-sleep { > + compatible = "arm,idle-state"; > + local-timer-stop; > + arm,psci-suspend-param = <0x1010000>; > + entry-latency-us = <400>; > + exit-latency-us = <500>; > + min-residency-us = <2000>; > + }; > + }; > + }; > + > + display-subsystem { > + compatible = "rockchip,display-subsystem"; > + ports = <&vopl_out>, <&vopb_out>; > }; > > pmu_a53 { > @@ -147,7 +197,7 @@ > #clock-cells = <0>; > }; > > - amba { > + amba: bus { > compatible = "simple-bus"; > #address-cells = <2>; > #size-cells = <2>; > @@ -183,7 +233,7 @@ > #size-cells = <2>; > #interrupt-cells = <1>; > aspm-no-l0s; > - bus-range = <0x0 0x1>; > + bus-range = <0x0 0x1f>; > clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, > <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; > clock-names = "aclk", "aclk-perf", > @@ -200,10 +250,12 @@ > linux,pci-domain = <0>; > max-link-speed = <1>; > msi-map = <0x0 &its 0x0 0x1000>; > - phys = <&pcie_phy>; > - phy-names = "pcie-phy"; > - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 > - 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; > + phys = <&pcie_phy 0>, <&pcie_phy 1>, > + <&pcie_phy 2>, <&pcie_phy 3>; > + phy-names = "pcie-phy-0", "pcie-phy-1", > + "pcie-phy-2", "pcie-phy-3"; > + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 > + 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; > resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, > <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, > <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, > @@ -236,10 +288,11 @@ > resets = <&cru SRST_A_GMAC>; > reset-names = "stmmaceth"; > rockchip,grf = <&grf>; > + snps,txpbl = <0x4>; > status = "disabled"; > }; > > - sdio0: dwmmc@fe310000 { > + sdio0: mmc@fe310000 { > compatible = "rockchip,rk3399-dw-mshc", > "rockchip,rk3288-dw-mshc"; > reg = <0x0 0xfe310000 0x0 0x4000>; > @@ -255,12 +308,14 @@ > status = "disabled"; > }; > > - sdmmc: dwmmc@fe320000 { > + sdmmc: mmc@fe320000 { > compatible = "rockchip,rk3399-dw-mshc", > "rockchip,rk3288-dw-mshc"; > reg = <0x0 0xfe320000 0x0 0x4000>; > interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; > max-frequency = <150000000>; > + assigned-clocks = <&cru HCLK_SD>; > + assigned-clock-rates = <200000000>; > clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, > <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; > clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; > @@ -278,7 +333,6 @@ > arasan,soc-ctl-syscon = <&grf>; > assigned-clocks = <&cru SCLK_EMMC>; > assigned-clock-rates = <200000000>; > - max-frequency = <200000000>; > clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; > clock-names = "clk_xin", "clk_ahb"; > clock-output-names = "emmc_cardclock"; > @@ -286,6 +340,7 @@ > phys = <&emmc_phy>; > phy-names = "phy_arasan"; > power-domains = <&power RK3399_PD_EMMC>; > + disable-cqe-dcmd; > status = "disabled"; > }; > > @@ -295,11 +350,8 @@ > interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; > clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, > <&u2phy0>; > - clock-names = "usbhost", "arbiter", > - "utmi"; > phys = <&u2phy0_host>; > phy-names = "usb"; > - power-domains = <&power RK3399_PD_PERIHP>; > status = "disabled"; > }; > > @@ -309,11 +361,8 @@ > interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; > clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, > <&u2phy0>; > - clock-names = "usbhost", "arbiter", > - "utmi"; > phys = <&u2phy0_host>; > phy-names = "usb"; > - power-domains = <&power RK3399_PD_PERIHP>; > status = "disabled"; > }; > > @@ -323,11 +372,8 @@ > interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; > clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, > <&u2phy1>; > - clock-names = "usbhost", "arbiter", > - "utmi"; > phys = <&u2phy1_host>; > phy-names = "usb"; > - power-domains = <&power RK3399_PD_PERIHP>; > status = "disabled"; > }; > > @@ -337,15 +383,12 @@ > interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; > clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, > <&u2phy1>; > - clock-names = "usbhost", "arbiter", > - "utmi"; > phys = <&u2phy1_host>; > phy-names = "usb"; > - power-domains = <&power RK3399_PD_PERIHP>; > status = "disabled"; > }; > > - usbdrd3_0: dwc3_typec0: usb@fe800000 { > + usbdrd3_0: usb@fe800000 { > compatible = "rockchip,rk3399-dwc3"; > #address-cells = <2>; > #size-cells = <2>; > @@ -364,6 +407,9 @@ > compatible = "snps,dwc3"; > reg = <0x0 0xfe800000 0x0 0x100000>; > interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, > + <&cru SCLK_USB3OTG0_SUSPEND>; > + clock-names = "ref", "bus_early", "suspend"; > dr_mode = "otg"; > phys = <&u2phy0_otg>, <&tcphy0_usb3>; > phy-names = "usb2-phy", "usb3-phy"; > @@ -378,7 +424,7 @@ > }; > }; > > - dwc3_typec1: usbdrd3_1: usb@fe900000 { > + usbdrd3_1: usb@fe900000 { > compatible = "rockchip,rk3399-dwc3"; > #address-cells = <2>; > #size-cells = <2>; > @@ -397,6 +443,9 @@ > compatible = "snps,dwc3"; > reg = <0x0 0xfe900000 0x0 0x100000>; > interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, > + <&cru SCLK_USB3OTG1_SUSPEND>; > + clock-names = "ref", "bus_early", "suspend"; > dr_mode = "otg"; > phys = <&u2phy1_otg>, <&tcphy1_usb3>; > phy-names = "usb2-phy", "usb3-phy"; > @@ -464,6 +513,7 @@ > its: interrupt-controller@fee20000 { > compatible = "arm,gic-v3-its"; > msi-controller; > + #msi-cells = <1>; > reg = <0x0 0xfee20000 0x0 0x20000>; > }; > > @@ -612,7 +662,6 @@ > clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; > clock-names = "baudclk", "apb_pclk"; > interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; > - clock-frequency = <24000000>; > reg-shift = <2>; > reg-io-width = <4>; > pinctrl-names = "default"; > @@ -639,6 +688,8 @@ > clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; > clock-names = "spiclk", "apb_pclk"; > interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; > + dmas = <&dmac_peri 10>, <&dmac_peri 11>; > + dma-names = "tx", "rx"; > pinctrl-names = "default"; > pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; > #address-cells = <1>; > @@ -652,6 +703,8 @@ > clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; > clock-names = "spiclk", "apb_pclk"; > interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; > + dmas = <&dmac_peri 12>, <&dmac_peri 13>; > + dma-names = "tx", "rx"; > pinctrl-names = "default"; > pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; > #address-cells = <1>; > @@ -665,6 +718,8 @@ > clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; > clock-names = "spiclk", "apb_pclk"; > interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; > + dmas = <&dmac_peri 14>, <&dmac_peri 15>; > + dma-names = "tx", "rx"; > pinctrl-names = "default"; > pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; > #address-cells = <1>; > @@ -678,6 +733,8 @@ > clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; > clock-names = "spiclk", "apb_pclk"; > interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; > + dmas = <&dmac_peri 18>, <&dmac_peri 19>; > + dma-names = "tx", "rx"; > pinctrl-names = "default"; > pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; > #address-cells = <1>; > @@ -691,8 +748,11 @@ > clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; > clock-names = "spiclk", "apb_pclk"; > interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; > + dmas = <&dmac_bus 8>, <&dmac_bus 9>; > + dma-names = "tx", "rx"; > pinctrl-names = "default"; > pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; > + power-domains = <&power RK3399_PD_SDIOAUDIO>; > #address-cells = <1>; > #size-cells = <0>; > status = "disabled"; > @@ -727,13 +787,18 @@ > map0 { > trip = <&cpu_alert0>; > cooling-device = > - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > }; > map1 { > trip = <&cpu_alert1>; > cooling-device = > <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > }; > }; > }; > @@ -761,7 +826,7 @@ > map0 { > trip = <&gpu_alert0>; > cooling-device = > - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > }; > }; > }; > @@ -980,22 +1045,11 @@ > <&cru PCLK_GMAC>; > pm_qos = <&qos_gmac>; > }; > - pd_perihp@RK3399_PD_PERIHP { > - reg = <RK3399_PD_PERIHP>; > - #address-cells = <1>; > - #size-cells = <0>; > - clocks = <&cru ACLK_PERIHP>; > - pm_qos = <&qos_perihp>, > - <&qos_pcie>, > - <&qos_usb_host0>, > - <&qos_usb_host1>; > - > - pd_sd@RK3399_PD_SD { > - reg = <RK3399_PD_SD>; > - clocks = <&cru HCLK_SDMMC>, > - <&cru SCLK_SDMMC>; > - pm_qos = <&qos_sd>; > - }; > + pd_sd@RK3399_PD_SD { > + reg = <RK3399_PD_SD>; > + clocks = <&cru HCLK_SDMMC>, > + <&cru SCLK_SDMMC>; > + pm_qos = <&qos_sd>; > }; > pd_sdioaudio@RK3399_PD_SDIOAUDIO { > reg = <RK3399_PD_SDIOAUDIO>; > @@ -1070,6 +1124,8 @@ > pmugrf: syscon@ff320000 { > compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; > reg = <0x0 0xff320000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > > pmu_io_domains: io-domains { > compatible = "rockchip,rk3399-pmu-io-voltage-domain"; > @@ -1192,6 +1248,62 @@ > status = "disabled"; > }; > > + vpu: video-codec@ff650000 { > + compatible = "rockchip,rk3399-vpu"; > + reg = <0x0 0xff650000 0x0 0x800>; > + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "vepu", "vdpu"; > + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; > + clock-names = "aclk", "hclk"; > + iommus = <&vpu_mmu>; > + power-domains = <&power RK3399_PD_VCODEC>; > + }; > + > + vpu_mmu: iommu@ff650800 { > + compatible = "rockchip,iommu"; > + reg = <0x0 0xff650800 0x0 0x40>; > + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "vpu_mmu"; > + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; > + clock-names = "aclk", "iface"; > + #iommu-cells = <0>; > + power-domains = <&power RK3399_PD_VCODEC>; > + }; > + > + vdec_mmu: iommu@ff660480 { > + compatible = "rockchip,iommu"; > + reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; > + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "vdec_mmu"; > + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; > + clock-names = "aclk", "iface"; > + #iommu-cells = <0>; > + status = "disabled"; > + }; > + > + iep_mmu: iommu@ff670800 { > + compatible = "rockchip,iommu"; > + reg = <0x0 0xff670800 0x0 0x40>; > + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "iep_mmu"; > + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; > + clock-names = "aclk", "iface"; > + #iommu-cells = <0>; > + status = "disabled"; > + }; > + > + rga: rga@ff680000 { > + compatible = "rockchip,rk3399-rga"; > + reg = <0x0 0xff680000 0x0 0x10000>; > + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; > + clock-names = "aclk", "hclk", "sclk"; > + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; > + reset-names = "core", "axi", "ahb"; > + power-domains = <&power RK3399_PD_RGA>; > + }; > + > efuse0: efuse@ff690000 { > compatible = "rockchip,rk3399-efuse"; > reg = <0x0 0xff690000 0x0 0x80>; > @@ -1342,8 +1454,9 @@ > compatible = "rockchip,rk3399-pcie-phy"; > clocks = <&cru SCLK_PCIEPHY_REF>; > clock-names = "refclk"; > - #phy-cells = <0>; > + #phy-cells = <1>; > resets = <&cru SRST_PCIEPHY>; > + drive-impedance-ohm = <50>; > reset-names = "phy"; > status = "disabled"; > }; > @@ -1592,11 +1705,11 @@ > reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; > interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; > interrupt-names = "isp0_mmu"; > - clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>; > + clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; > clock-names = "aclk", "iface"; > #iommu-cells = <0>; > + power-domains = <&power RK3399_PD_ISP0>; > rockchip,disable-mmu-reset; > - status = "disabled"; > }; > > isp1_mmu: iommu@ff924000 { > @@ -1604,11 +1717,11 @@ > reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; > interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; > interrupt-names = "isp1_mmu"; > - clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>; > + clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; > clock-names = "aclk", "iface"; > #iommu-cells = <0>; > + power-domains = <&power RK3399_PD_ISP1>; > rockchip,disable-mmu-reset; > - status = "disabled"; > }; > > hdmi_sound: hdmi-sound { > @@ -1660,21 +1773,29 @@ > }; > > mipi_dsi: mipi@ff960000 { > - compatible = "rockchip,rk3399_mipi_dsi"; > + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; > reg = <0x0 0xff960000 0x0 0x8000>; > interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; > - clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, > - <&cru SCLK_DPHY_TX0_CFG>; > - clock-names = "ref", "pclk", "phy_cfg"; > + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>, > + <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; > + clock-names = "ref", "pclk", "phy_cfg", "grf"; > + power-domains = <&power RK3399_PD_VIO>; > + resets = <&cru SRST_P_MIPI_DSI0>; > + reset-names = "apb"; > rockchip,grf = <&grf>; > #address-cells = <1>; > #size-cells = <0>; > status = "disabled"; > + > ports { > - reg = <1>; > - mipi_in: port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + mipi_in: port@0 { > + reg = <0>; > #address-cells = <1>; > #size-cells = <0>; > + > mipi_in_vopb: endpoint@0 { > reg = <0>; > remote-endpoint = <&vopb_out_mipi>; > @@ -1698,6 +1819,8 @@ > resets = <&cru SRST_P_MIPI_DSI1>; > reset-names = "apb"; > rockchip,grf = <&grf>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > > ports { > @@ -1765,6 +1888,7 @@ > <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>; > interrupt-names = "gpu", "job", "mmu"; > clocks = <&cru ACLK_GPU>; > + #cooling-cells = <2>; > power-domains = <&power RK3399_PD_GPU>; > status = "disabled"; > }; > @@ -1929,14 +2053,14 @@ > > clock { > clk_32k: clk-32k { > - rockchip,pins = <0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>; > + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; > }; > }; > > edp { > edp_hpd: edp-hpd { > rockchip,pins = > - <4 RK_PC7 RK_FUNC_2 &pcfg_pull_none>; > + <4 RK_PC7 2 &pcfg_pull_none>; > }; > }; > > @@ -1944,382 +2068,409 @@ > rgmii_pins: rgmii-pins { > rockchip,pins = > /* mac_txclk */ > - <3 RK_PC1 RK_FUNC_1 &pcfg_pull_none_13ma>, > + <3 RK_PC1 1 &pcfg_pull_none_13ma>, > /* mac_rxclk */ > - <3 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB6 1 &pcfg_pull_none>, > /* mac_mdio */ > - <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB5 1 &pcfg_pull_none>, > /* mac_txen */ > - <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>, > + <3 RK_PB4 1 &pcfg_pull_none_13ma>, > /* mac_clk */ > - <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB3 1 &pcfg_pull_none>, > /* mac_rxdv */ > - <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB1 1 &pcfg_pull_none>, > /* mac_mdc */ > - <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB0 1 &pcfg_pull_none>, > /* mac_rxd1 */ > - <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PA7 1 &pcfg_pull_none>, > /* mac_rxd0 */ > - <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PA6 1 &pcfg_pull_none>, > /* mac_txd1 */ > - <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>, > + <3 RK_PA5 1 &pcfg_pull_none_13ma>, > /* mac_txd0 */ > - <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>, > + <3 RK_PA4 1 &pcfg_pull_none_13ma>, > /* mac_rxd3 */ > - <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PA3 1 &pcfg_pull_none>, > /* mac_rxd2 */ > - <3 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PA2 1 &pcfg_pull_none>, > /* mac_txd3 */ > - <3 RK_PA1 RK_FUNC_1 &pcfg_pull_none_13ma>, > + <3 RK_PA1 1 &pcfg_pull_none_13ma>, > /* mac_txd2 */ > - <3 RK_PA0 RK_FUNC_1 &pcfg_pull_none_13ma>; > + <3 RK_PA0 1 &pcfg_pull_none_13ma>; > }; > > rmii_pins: rmii-pins { > rockchip,pins = > /* mac_mdio */ > - <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB5 1 &pcfg_pull_none>, > /* mac_txen */ > - <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>, > + <3 RK_PB4 1 &pcfg_pull_none_13ma>, > /* mac_clk */ > - <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB3 1 &pcfg_pull_none>, > /* mac_rxer */ > - <3 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB2 1 &pcfg_pull_none>, > /* mac_rxdv */ > - <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB1 1 &pcfg_pull_none>, > /* mac_mdc */ > - <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PB0 1 &pcfg_pull_none>, > /* mac_rxd1 */ > - <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PA7 1 &pcfg_pull_none>, > /* mac_rxd0 */ > - <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, > + <3 RK_PA6 1 &pcfg_pull_none>, > /* mac_txd1 */ > - <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>, > + <3 RK_PA5 1 &pcfg_pull_none_13ma>, > /* mac_txd0 */ > - <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>; > + <3 RK_PA4 1 &pcfg_pull_none_13ma>; > }; > }; > > i2c0 { > i2c0_xfer: i2c0-xfer { > rockchip,pins = > - <1 RK_PB7 RK_FUNC_2 &pcfg_pull_none>, > - <1 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; > + <1 RK_PB7 2 &pcfg_pull_none>, > + <1 RK_PC0 2 &pcfg_pull_none>; > }; > }; > > i2c1 { > i2c1_xfer: i2c1-xfer { > rockchip,pins = > - <4 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, > - <4 RK_PA1 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PA2 1 &pcfg_pull_none>, > + <4 RK_PA1 1 &pcfg_pull_none>; > }; > }; > > i2c2 { > i2c2_xfer: i2c2-xfer { > rockchip,pins = > - <2 RK_PA1 RK_FUNC_2 &pcfg_pull_none_12ma>, > - <2 RK_PA0 RK_FUNC_2 &pcfg_pull_none_12ma>; > + <2 RK_PA1 2 &pcfg_pull_none_12ma>, > + <2 RK_PA0 2 &pcfg_pull_none_12ma>; > }; > }; > > i2c3 { > i2c3_xfer: i2c3-xfer { > rockchip,pins = > - <4 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, > - <4 RK_PC0 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PC1 1 &pcfg_pull_none>, > + <4 RK_PC0 1 &pcfg_pull_none>; > }; > }; > > i2c4 { > i2c4_xfer: i2c4-xfer { > rockchip,pins = > - <1 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, > - <1 RK_PB3 RK_FUNC_1 &pcfg_pull_none>; > + <1 RK_PB4 1 &pcfg_pull_none>, > + <1 RK_PB3 1 &pcfg_pull_none>; > }; > }; > > i2c5 { > i2c5_xfer: i2c5-xfer { > rockchip,pins = > - <3 RK_PB3 RK_FUNC_2 &pcfg_pull_none>, > - <3 RK_PB2 RK_FUNC_2 &pcfg_pull_none>; > + <3 RK_PB3 2 &pcfg_pull_none>, > + <3 RK_PB2 2 &pcfg_pull_none>; > }; > }; > > i2c6 { > i2c6_xfer: i2c6-xfer { > rockchip,pins = > - <2 RK_PB2 RK_FUNC_2 &pcfg_pull_none>, > - <2 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; > + <2 RK_PB2 2 &pcfg_pull_none>, > + <2 RK_PB1 2 &pcfg_pull_none>; > }; > }; > > i2c7 { > i2c7_xfer: i2c7-xfer { > rockchip,pins = > - <2 RK_PB0 RK_FUNC_2 &pcfg_pull_none>, > - <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; > + <2 RK_PB0 2 &pcfg_pull_none>, > + <2 RK_PA7 2 &pcfg_pull_none>; > }; > }; > > i2c8 { > i2c8_xfer: i2c8-xfer { > rockchip,pins = > - <1 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, > - <1 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; > + <1 RK_PC5 1 &pcfg_pull_none>, > + <1 RK_PC4 1 &pcfg_pull_none>; > }; > }; > > i2s0 { > + i2s0_2ch_bus: i2s0-2ch-bus { > + rockchip,pins = > + <3 RK_PD0 1 &pcfg_pull_none>, > + <3 RK_PD1 1 &pcfg_pull_none>, > + <3 RK_PD2 1 &pcfg_pull_none>, > + <3 RK_PD3 1 &pcfg_pull_none>, > + <3 RK_PD7 1 &pcfg_pull_none>, > + <4 RK_PA0 1 &pcfg_pull_none>; > + }; > + > i2s0_8ch_bus: i2s0-8ch-bus { > rockchip,pins = > - <3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>, > - <3 RK_PD1 RK_FUNC_1 &pcfg_pull_none>, > - <3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>, > - <3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>, > - <3 RK_PD4 RK_FUNC_1 &pcfg_pull_none>, > - <3 RK_PD5 RK_FUNC_1 &pcfg_pull_none>, > - <3 RK_PD6 RK_FUNC_1 &pcfg_pull_none>, > - <3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>, > - <4 RK_PA0 RK_FUNC_1 &pcfg_pull_none>; > + <3 RK_PD0 1 &pcfg_pull_none>, > + <3 RK_PD1 1 &pcfg_pull_none>, > + <3 RK_PD2 1 &pcfg_pull_none>, > + <3 RK_PD3 1 &pcfg_pull_none>, > + <3 RK_PD4 1 &pcfg_pull_none>, > + <3 RK_PD5 1 &pcfg_pull_none>, > + <3 RK_PD6 1 &pcfg_pull_none>, > + <3 RK_PD7 1 &pcfg_pull_none>, > + <4 RK_PA0 1 &pcfg_pull_none>; > }; > }; > > i2s1 { > i2s1_2ch_bus: i2s1-2ch-bus { > rockchip,pins = > - <4 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, > - <4 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, > - <4 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, > - <4 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, > - <4 RK_PA7 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PA3 1 &pcfg_pull_none>, > + <4 RK_PA4 1 &pcfg_pull_none>, > + <4 RK_PA5 1 &pcfg_pull_none>, > + <4 RK_PA6 1 &pcfg_pull_none>, > + <4 RK_PA7 1 &pcfg_pull_none>; > }; > }; > > sdio0 { > sdio0_bus1: sdio0-bus1 { > rockchip,pins = > - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PC4 1 &pcfg_pull_up>; > }; > > sdio0_bus4: sdio0-bus4 { > rockchip,pins = > - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, > - <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, > - <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>, > - <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PC4 1 &pcfg_pull_up>, > + <2 RK_PC5 1 &pcfg_pull_up>, > + <2 RK_PC6 1 &pcfg_pull_up>, > + <2 RK_PC7 1 &pcfg_pull_up>; > }; > > sdio0_cmd: sdio0-cmd { > rockchip,pins = > - <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PD0 1 &pcfg_pull_up>; > }; > > sdio0_clk: sdio0-clk { > rockchip,pins = > - <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; > + <2 RK_PD1 1 &pcfg_pull_none>; > }; > > sdio0_cd: sdio0-cd { > rockchip,pins = > - <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PD2 1 &pcfg_pull_up>; > }; > > sdio0_pwr: sdio0-pwr { > rockchip,pins = > - <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PD3 1 &pcfg_pull_up>; > }; > > sdio0_bkpwr: sdio0-bkpwr { > rockchip,pins = > - <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PD4 1 &pcfg_pull_up>; > }; > > sdio0_wp: sdio0-wp { > rockchip,pins = > - <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; > + <0 RK_PA3 1 &pcfg_pull_up>; > }; > > sdio0_int: sdio0-int { > rockchip,pins = > - <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; > + <0 RK_PA4 1 &pcfg_pull_up>; > }; > }; > > sdmmc { > sdmmc_bus1: sdmmc-bus1 { > rockchip,pins = > - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; > + <4 RK_PB0 1 &pcfg_pull_up>; > }; > > sdmmc_bus4: sdmmc-bus4 { > rockchip,pins = > - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>, > - <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>, > - <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>, > - <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; > + <4 RK_PB0 1 &pcfg_pull_up>, > + <4 RK_PB1 1 &pcfg_pull_up>, > + <4 RK_PB2 1 &pcfg_pull_up>, > + <4 RK_PB3 1 &pcfg_pull_up>; > }; > > sdmmc_clk: sdmmc-clk { > rockchip,pins = > - <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PB4 1 &pcfg_pull_none>; > }; > > sdmmc_cmd: sdmmc-cmd { > rockchip,pins = > - <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>; > + <4 RK_PB5 1 &pcfg_pull_up>; > }; > > sdmmc_cd: sdmmc-cd { > rockchip,pins = > - <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; > + <0 RK_PA7 1 &pcfg_pull_up>; > }; > > sdmmc_wp: sdmmc-wp { > rockchip,pins = > - <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; > + <0 RK_PB0 1 &pcfg_pull_up>; > }; > }; > > sleep { > ap_pwroff: ap-pwroff { > - rockchip,pins = <1 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; > + rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; > }; > > ddrio_pwroff: ddrio-pwroff { > - rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_none>; > + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; > }; > }; > > spdif { > spdif_bus: spdif-bus { > rockchip,pins = > - <4 RK_PC5 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PC5 1 &pcfg_pull_none>; > }; > > spdif_bus_1: spdif-bus-1 { > rockchip,pins = > - <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; > + <3 RK_PC0 3 &pcfg_pull_none>; > }; > }; > > spi0 { > spi0_clk: spi0-clk { > rockchip,pins = > - <3 RK_PA6 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA6 2 &pcfg_pull_up>; > }; > spi0_cs0: spi0-cs0 { > rockchip,pins = > - <3 RK_PA7 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA7 2 &pcfg_pull_up>; > }; > spi0_cs1: spi0-cs1 { > rockchip,pins = > - <3 RK_PB0 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PB0 2 &pcfg_pull_up>; > }; > spi0_tx: spi0-tx { > rockchip,pins = > - <3 RK_PA5 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA5 2 &pcfg_pull_up>; > }; > spi0_rx: spi0-rx { > rockchip,pins = > - <3 RK_PA4 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA4 2 &pcfg_pull_up>; > }; > }; > > spi1 { > spi1_clk: spi1-clk { > rockchip,pins = > - <1 RK_PB1 RK_FUNC_2 &pcfg_pull_up>; > + <1 RK_PB1 2 &pcfg_pull_up>; > }; > spi1_cs0: spi1-cs0 { > rockchip,pins = > - <1 RK_PB2 RK_FUNC_2 &pcfg_pull_up>; > + <1 RK_PB2 2 &pcfg_pull_up>; > }; > spi1_rx: spi1-rx { > rockchip,pins = > - <1 RK_PA7 RK_FUNC_2 &pcfg_pull_up>; > + <1 RK_PA7 2 &pcfg_pull_up>; > }; > spi1_tx: spi1-tx { > rockchip,pins = > - <1 RK_PB0 RK_FUNC_2 &pcfg_pull_up>; > + <1 RK_PB0 2 &pcfg_pull_up>; > }; > }; > > spi2 { > spi2_clk: spi2-clk { > rockchip,pins = > - <2 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PB3 1 &pcfg_pull_up>; > }; > spi2_cs0: spi2-cs0 { > rockchip,pins = > - <2 RK_PB4 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PB4 1 &pcfg_pull_up>; > }; > spi2_rx: spi2-rx { > rockchip,pins = > - <2 RK_PB1 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PB1 1 &pcfg_pull_up>; > }; > spi2_tx: spi2-tx { > rockchip,pins = > - <2 RK_PB2 RK_FUNC_1 &pcfg_pull_up>; > + <2 RK_PB2 1 &pcfg_pull_up>; > }; > }; > > spi3 { > spi3_clk: spi3-clk { > rockchip,pins = > - <1 RK_PC1 RK_FUNC_1 &pcfg_pull_up>; > + <1 RK_PC1 1 &pcfg_pull_up>; > }; > spi3_cs0: spi3-cs0 { > rockchip,pins = > - <1 RK_PC2 RK_FUNC_1 &pcfg_pull_up>; > + <1 RK_PC2 1 &pcfg_pull_up>; > }; > spi3_rx: spi3-rx { > rockchip,pins = > - <1 RK_PB7 RK_FUNC_1 &pcfg_pull_up>; > + <1 RK_PB7 1 &pcfg_pull_up>; > }; > spi3_tx: spi3-tx { > rockchip,pins = > - <1 RK_PC0 RK_FUNC_1 &pcfg_pull_up>; > + <1 RK_PC0 1 &pcfg_pull_up>; > }; > }; > > spi4 { > spi4_clk: spi4-clk { > rockchip,pins = > - <3 RK_PA2 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA2 2 &pcfg_pull_up>; > }; > spi4_cs0: spi4-cs0 { > rockchip,pins = > - <3 RK_PA3 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA3 2 &pcfg_pull_up>; > }; > spi4_rx: spi4-rx { > rockchip,pins = > - <3 RK_PA0 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA0 2 &pcfg_pull_up>; > }; > spi4_tx: spi4-tx { > rockchip,pins = > - <3 RK_PA1 RK_FUNC_2 &pcfg_pull_up>; > + <3 RK_PA1 2 &pcfg_pull_up>; > }; > }; > > spi5 { > spi5_clk: spi5-clk { > rockchip,pins = > - <2 RK_PC6 RK_FUNC_2 &pcfg_pull_up>; > + <2 RK_PC6 2 &pcfg_pull_up>; > }; > spi5_cs0: spi5-cs0 { > rockchip,pins = > - <2 RK_PC7 RK_FUNC_2 &pcfg_pull_up>; > + <2 RK_PC7 2 &pcfg_pull_up>; > }; > spi5_rx: spi5-rx { > rockchip,pins = > - <2 RK_PC4 RK_FUNC_2 &pcfg_pull_up>; > + <2 RK_PC4 2 &pcfg_pull_up>; > }; > spi5_tx: spi5-tx { > rockchip,pins = > - <2 RK_PC5 RK_FUNC_2 &pcfg_pull_up>; > + <2 RK_PC5 2 &pcfg_pull_up>; > + }; > + }; > + > + testclk { > + test_clkout0: test-clkout0 { > + rockchip,pins = > + <0 RK_PA0 1 &pcfg_pull_none>; > + }; > + > + test_clkout1: test-clkout1 { > + rockchip,pins = > + <2 RK_PD1 2 &pcfg_pull_none>; > + }; > + > + test_clkout2: test-clkout2 { > + rockchip,pins = > + <0 RK_PB0 3 &pcfg_pull_none>; > }; > }; > > @@ -2329,168 +2480,168 @@ > }; > > otp_out: otp-out { > - rockchip,pins = <1 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; > + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; > }; > }; > > uart0 { > uart0_xfer: uart0-xfer { > rockchip,pins = > - <2 RK_PC0 RK_FUNC_1 &pcfg_pull_up>, > - <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>; > + <2 RK_PC0 1 &pcfg_pull_up>, > + <2 RK_PC1 1 &pcfg_pull_none>; > }; > > uart0_cts: uart0-cts { > rockchip,pins = > - <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; > + <2 RK_PC2 1 &pcfg_pull_none>; > }; > > uart0_rts: uart0-rts { > rockchip,pins = > - <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; > + <2 RK_PC3 1 &pcfg_pull_none>; > }; > }; > > uart1 { > uart1_xfer: uart1-xfer { > rockchip,pins = > - <3 RK_PB4 RK_FUNC_2 &pcfg_pull_up>, > - <3 RK_PB5 RK_FUNC_2 &pcfg_pull_none>; > + <3 RK_PB4 2 &pcfg_pull_up>, > + <3 RK_PB5 2 &pcfg_pull_none>; > }; > }; > > uart2a { > uart2a_xfer: uart2a-xfer { > rockchip,pins = > - <4 RK_PB0 RK_FUNC_2 &pcfg_pull_up>, > - <4 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; > + <4 RK_PB0 2 &pcfg_pull_up>, > + <4 RK_PB1 2 &pcfg_pull_none>; > }; > }; > > uart2b { > uart2b_xfer: uart2b-xfer { > rockchip,pins = > - <4 RK_PC0 RK_FUNC_2 &pcfg_pull_up>, > - <4 RK_PC1 RK_FUNC_2 &pcfg_pull_none>; > + <4 RK_PC0 2 &pcfg_pull_up>, > + <4 RK_PC1 2 &pcfg_pull_none>; > }; > }; > > uart2c { > uart2c_xfer: uart2c-xfer { > rockchip,pins = > - <4 RK_PC3 RK_FUNC_1 &pcfg_pull_up>, > - <4 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PC3 1 &pcfg_pull_up>, > + <4 RK_PC4 1 &pcfg_pull_none>; > }; > }; > > uart3 { > uart3_xfer: uart3-xfer { > rockchip,pins = > - <3 RK_PB6 RK_FUNC_2 &pcfg_pull_up>, > - <3 RK_PB7 RK_FUNC_2 &pcfg_pull_none>; > + <3 RK_PB6 2 &pcfg_pull_up>, > + <3 RK_PB7 2 &pcfg_pull_none>; > }; > > uart3_cts: uart3-cts { > rockchip,pins = > - <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; > + <3 RK_PC0 2 &pcfg_pull_none>; > }; > > uart3_rts: uart3-rts { > rockchip,pins = > - <3 RK_PC3 RK_FUNC_2 &pcfg_pull_none>; > + <3 RK_PC1 2 &pcfg_pull_none>; > }; > }; > > uart4 { > uart4_xfer: uart4-xfer { > rockchip,pins = > - <1 RK_PA7 RK_FUNC_1 &pcfg_pull_up>, > - <1 RK_PB0 RK_FUNC_1 &pcfg_pull_none>; > + <1 RK_PA7 1 &pcfg_pull_up>, > + <1 RK_PB0 1 &pcfg_pull_none>; > }; > }; > > uarthdcp { > uarthdcp_xfer: uarthdcp-xfer { > rockchip,pins = > - <4 RK_PC5 RK_FUNC_2 &pcfg_pull_up>, > - <4 RK_PC6 RK_FUNC_2 &pcfg_pull_none>; > + <4 RK_PC5 2 &pcfg_pull_up>, > + <4 RK_PC6 2 &pcfg_pull_none>; > }; > }; > > pwm0 { > pwm0_pin: pwm0-pin { > rockchip,pins = > - <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PC2 1 &pcfg_pull_none>; > + }; > + > + pwm0_pin_pull_down: pwm0-pin-pull-down { > + rockchip,pins = > + <4 RK_PC2 1 &pcfg_pull_down>; > }; > > vop0_pwm_pin: vop0-pwm-pin { > rockchip,pins = > - <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; > + <4 RK_PC2 2 &pcfg_pull_none>; > + }; > + > + vop1_pwm_pin: vop1-pwm-pin { > + rockchip,pins = > + <4 RK_PC2 3 &pcfg_pull_none>; > }; > }; > > pwm1 { > pwm1_pin: pwm1-pin { > rockchip,pins = > - <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PC6 1 &pcfg_pull_none>; > }; > > - vop1_pwm_pin: vop1-pwm-pin { > + pwm1_pin_pull_down: pwm1-pin-pull-down { > rockchip,pins = > - <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; > + <4 RK_PC6 1 &pcfg_pull_down>; > }; > }; > > pwm2 { > pwm2_pin: pwm2-pin { > rockchip,pins = > - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; > + <1 RK_PC3 1 &pcfg_pull_none>; > }; > > pwm2_pin_pull_down: pwm2-pin-pull-down { > rockchip,pins = > - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>; > + <1 RK_PC3 1 &pcfg_pull_down>; > }; > }; > > pwm3a { > pwm3a_pin: pwm3a-pin { > rockchip,pins = > - <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; > + <0 RK_PA6 1 &pcfg_pull_none>; > }; > }; > > pwm3b { > pwm3b_pin: pwm3b-pin { > rockchip,pins = > - <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; > + <1 RK_PB6 1 &pcfg_pull_none>; > }; > }; > > hdmi { > hdmi_i2c_xfer: hdmi-i2c-xfer { > rockchip,pins = > - <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>, > - <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; > + <4 RK_PC1 3 &pcfg_pull_none>, > + <4 RK_PC0 3 &pcfg_pull_none>; > }; > > hdmi_cec: hdmi-cec { > rockchip,pins = > - <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; > + <4 RK_PC7 1 &pcfg_pull_none>; > }; > }; > > pcie { > - pcie_clkreqn: pci-clkreqn { > - rockchip,pins = > - <2 RK_PD2 RK_FUNC_2 &pcfg_pull_none>; > - }; > - > - pcie_clkreqnb: pci-clkreqnb { > - rockchip,pins = > - <4 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; > - }; > - > pcie_clkreqn_cpm: pci-clkreqn-cpm { > rockchip,pins = > <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/dts/cros-ec-keyboard.dtsi b/arch/arm/dts/cros-ec-keyboard.dtsi index 9c7fb0acae..4a0c1037fb 100644 --- a/arch/arm/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/dts/cros-ec-keyboard.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Keyboard dts fragment for devices that use cros-ec-keyboard * * Copyright (c) 2014 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> @@ -22,6 +19,7 @@ MATRIX_KEY(0x00, 0x02, KEY_F1) MATRIX_KEY(0x00, 0x03, KEY_B) MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x05, KEY_RO) MATRIX_KEY(0x00, 0x06, KEY_N) MATRIX_KEY(0x00, 0x08, KEY_EQUAL) MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) @@ -34,6 +32,7 @@ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) MATRIX_KEY(0x01, 0x09, KEY_F9) MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) MATRIX_KEY(0x02, 0x01, KEY_TAB) @@ -45,6 +44,7 @@ MATRIX_KEY(0x02, 0x07, KEY_102ND) MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) MATRIX_KEY(0x02, 0x09, KEY_F8) + MATRIX_KEY(0x02, 0x0a, KEY_YEN) MATRIX_KEY(0x03, 0x01, KEY_GRAVE) MATRIX_KEY(0x03, 0x02, KEY_F2) @@ -52,7 +52,9 @@ MATRIX_KEY(0x03, 0x04, KEY_F5) MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x09, KEY_F13) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) MATRIX_KEY(0x04, 0x01, KEY_A) diff --git a/arch/arm/dts/cros-ec-sbs.dtsi b/arch/arm/dts/cros-ec-sbs.dtsi index dfe5ea6ca2..71f5c5ecce 100644 --- a/arch/arm/dts/cros-ec-sbs.dtsi +++ b/arch/arm/dts/cros-ec-sbs.dtsi @@ -1,8 +1,45 @@ -// SPDX-License-Identifier: GPL-2.0 /* * Smart battery dts fragment for devices that use cros-ec-sbs * * Copyright (c) 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &i2c_tunnel { diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts index c72719c0d3..694b0d08d6 100644 --- a/arch/arm/dts/rk3399-evb.dts +++ b/arch/arm/dts/rk3399-evb.dts @@ -1,86 +1,18 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd */ /dts-v1/; #include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" / { model = "Rockchip RK3399 Evaluation Board"; - compatible = "rockchip,rk3399-evb", "rockchip,rk3399", - "google,rk3399evb-rev2"; - - chosen { - stdout-path = &uart2; - }; - - vdd_center: vdd-center { - compatible = "pwm-regulator"; - pwms = <&pwm3 0 25000 1>; - regulator-name = "vdd_center"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-init-microvolt = <950000>; - regulator-always-on; - regulator-boot-on; - status = "okay"; - }; - - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vccsys"; - regulator-boot-on; - regulator-always-on; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - - vcc5v0_host: vcc5v0-host-en { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_host"; - gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; - }; - - vcc5v0_typec0: vcc5v0-typec0-en { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_typec0"; - gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - vcc5v0_typec1: vcc5v0-typec1-en { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_typec1"; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; + compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; backlight: backlight { compatible = "pwm-backlight"; - power-supply = <&vccsys>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 @@ -116,18 +48,98 @@ 248 249 250 251 252 253 254 255>; default-brightness-level = <200>; pwms = <&pwm0 0 25000 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - pwm-delay-us = <10000>; - status = "disabled"; }; - panel:panel { - compatible = "simple-panel"; - power-supply = <&vcc33_lcd>; + edp_panel: edp-panel { + compatible ="lg,lp079qx1-sp0v"; backlight = <&backlight>; - /*enable-gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;*/ - status = "disabled"; + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + power-supply = <&vcc3v3_s0>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vdd_center: vdd-center { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 25000 0>; + regulator-name = "vdd_center"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + +}; + +&edp { + status = "okay"; + force-hpd; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; }; }; @@ -135,24 +147,253 @@ status = "okay"; }; -&pwm0 { +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; status = "okay"; }; -&pwm2 { +&i2c0 { status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_tp: LDO_REG2 { + regulator-name = "vcc3v0_tp"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; }; -&pwm3 { +&pwm0 { status = "okay"; }; -&saradc { +&pwm2 { status = "okay"; }; -&sdmmc { - bus-width = <4>; +&pwm3 { status = "okay"; }; @@ -164,115 +405,76 @@ status = "okay"; }; -&uart2 { - status = "okay"; +&pcie_phy { + status = "disabled"; }; -&usb_host0_ehci { - status = "okay"; +&pcie0 { + ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "disabled"; }; -&usb_host0_ohci { +&u2phy0 { status = "okay"; }; -&usbdrd3_0 { - vbus-supply = <&vcc5v0_typec0>; +&u2phy0_host { + phy-supply = <&vcc5v0_host>; status = "okay"; }; -&usb_host1_ehci { +&u2phy1 { status = "okay"; }; -&usb_host1_ohci { +&u2phy1_host { + phy-supply = <&vcc5v0_host>; status = "okay"; }; -&usbdrd3_1 { - vbus-supply = <&vcc5v0_typec1>; +&uart2 { status = "okay"; }; -&i2c0 { +&usb_host0_ehci { status = "okay"; - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <100>; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "wifibt_32kin"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - reg = <0x1b>; - rockchip,system-power-controller; - #clock-cells = <1>; - status = "okay"; +}; - vcc12-supply = <&vcc3v3_sys>; +&usb_host0_ohci { + status = "okay"; +}; - regulators { - vcc33_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_lcd"; - }; - }; - }; +&usb_host1_ehci { + status = "okay"; }; -&mipi_dsi { - status = "disabled"; - rockchip,panel = <&panel>; - display-timings { - timing0 { - bits-per-pixel = <24>; - clock-frequency = <160000000>; - hfront-porch = <120>; - hsync-len = <20>; - hback-porch = <21>; - hactive = <1200>; - vfront-porch = <21>; - vsync-len = <3>; - vback-porch = <18>; - vactive = <1920>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; +&usb_host1_ohci { + status = "okay"; }; &pinctrl { pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; + }; - pmic_dvs2: pmic-dvs2 { + usb2 { + vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <1 18 RK_FUNC_GPIO &pcfg_pull_down>; + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -&gmac { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x28>; - rx_delay = <0x11>; +&vopb { + status = "okay"; +}; + +&vopb_mmu { status = "okay"; }; diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts index 6b059bd7a0..ebe2ee77ba 100644 --- a/arch/arm/dts/rk3399-ficus.dts +++ b/arch/arm/dts/rk3399-ficus.dts @@ -146,6 +146,12 @@ }; }; +&spi1 { + /* On both Low speed and High speed expansion */ + cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; + status = "okay"; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts index 89c67fd24c..d63faf38cc 100644 --- a/arch/arm/dts/rk3399-firefly.dts +++ b/arch/arm/dts/rk3399-firefly.dts @@ -1,19 +1,20 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. */ /dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi" / { model = "Firefly-RK3399 Board"; compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; chosen { - stdout-path = &uart2; + stdout-path = "serial2:1500000n8"; }; backlight: backlight { @@ -63,6 +64,48 @@ #clock-cells = <0>; }; + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; + }; + rt5640-sound { compatible = "simple-audio-card"; simple-audio-card,name = "rockchip,rt5640-codec"; @@ -102,15 +145,27 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&pcie_drv>; + pinctrl-0 = <&pcie_pwr_en>; regulator-name = "vcc3v3_pcie"; regulator-always-on; regulator-boot-on; + vin-supply = <&dc_12v>; }; vcc3v3_sys: vcc3v3-sys { @@ -120,32 +175,29 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; }; + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; + pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; regulator-always-on; + vin-supply = <&vcc_sys>; }; - vcc5v0_sys: vcc5v0-sys { + vcc_sys: vcc-sys { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; + vin-supply = <&dc_12v>; }; vdd_log: vdd-log { @@ -156,16 +208,7 @@ regulator-boot-on; regulator-min-microvolt = <430000>; regulator-max-microvolt = <1400000>; - regulator-init-microvolt = <950000>; - }; - - vccadc_ref: vccadc-ref { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_sys>; }; }; @@ -201,15 +244,22 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; clock_in_out = "input"; - phy-supply = <&vcc_phy>; + phy-supply = <&vcc_lan>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x33>; - rx_delay = <0x45>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; status = "okay"; }; @@ -231,16 +281,16 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc1v8_pmu>; @@ -301,12 +351,12 @@ }; }; - vcc3v0_tp: LDO_REG2 { - regulator-name = "vcc3v0_tp"; + vcc2v8_dvp: LDO_REG2 { + regulator-name = "vcc2v8_dvp"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -324,8 +374,8 @@ }; }; - vcc_sd: LDO_REG4 { - regulator-name = "vcc_sd"; + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; @@ -382,7 +432,7 @@ }; }; - vcc3v3_s3: SWITCH_REG1 { + vcc3v3_s3: vcc_lan: SWITCH_REG1 { regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on; @@ -412,7 +462,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc5v0_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -429,7 +479,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc5v0_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -476,19 +526,16 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; }; @@ -497,7 +544,7 @@ bt656-supply = <&vcc1v8_dvp>; audio-supply = <&vcca1v8_codec>; - sdmmc-supply = <&vcc_sd>; + sdmmc-supply = <&vcc_sdio>; gpio1830-supply = <&vcc_3v0>; }; @@ -509,7 +556,7 @@ ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn>; + pinctrl-0 = <&pcie_clkreqn_cpm>; status = "okay"; }; @@ -532,7 +579,7 @@ }; pcie { - pcie_drv: pcie-drv { + pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -570,10 +617,26 @@ }; usb2 { - host_vbus_drv: host-vbus-drv { + vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm0 { @@ -585,24 +648,70 @@ }; &saradc { - vref-supply = <&vccadc_ref>; + vref-supply = <&vcca1v8_s3>; status = "okay"; }; +&sdio0 { + /* WiFi & BT combo module Ampak AP6356S */ + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + + /* Power supply */ + vqmmc-supply = &vcc1v8_s3; /* IO line */ + vmmc-supply = &vcc_sdio; /* card's power */ + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; status = "okay"; }; &sdhci { bus-width = <8>; - keep-power-in-suspend; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; non-removable; status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; @@ -662,3 +771,37 @@ &usb_host1_ohci { status = "okay"; }; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3399-gru-bob.dts b/arch/arm/dts/rk3399-gru-bob.dts index 1ee0dc0d9f..e6c1c94c8d 100644 --- a/arch/arm/dts/rk3399-gru-bob.dts +++ b/arch/arm/dts/rk3399-gru-bob.dts @@ -18,11 +18,11 @@ "google,bob", "google,gru", "rockchip,rk3399"; edp_panel: edp-panel { - compatible = "boe,nv101wxmn51", "simple-panel"; + compatible = "boe,nv101wxmn51"; backlight = <&backlight>; power-supply = <&pp3300_disp>; - ports { + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; }; @@ -68,12 +68,22 @@ &spi0 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &pinctrl { tpm { h1_int_od_l: h1-int-od-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/dts/rk3399-gru-chromebook.dtsi b/arch/arm/dts/rk3399-gru-chromebook.dtsi index c6495adcca..1384dabbdf 100644 --- a/arch/arm/dts/rk3399-gru-chromebook.dtsi +++ b/arch/arm/dts/rk3399-gru-chromebook.dtsi @@ -194,20 +194,25 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; - default-brightness-level = <51>; enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; power-supply = <&pp3300_disp>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwm-delay-us = <10000>; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake_on_bt: wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; }; &ppvar_bigcpu { @@ -232,7 +237,6 @@ &edp { status = "okay"; - rockchip,panel = <&edp_panel>; ports { edp_out: port@1 { reg = <1>; @@ -287,11 +291,9 @@ ap_i2c_tp: &i2c5 { #pwm-cells = <1>; }; - usbc_extcon1: extcon@1 { + usbc_extcon1: extcon1 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <1>; - - #extcon-cells = <0>; }; }; @@ -361,27 +363,27 @@ ap_i2c_tp: &i2c5 { &pinctrl { discrete-regulators { pp1500_en: pp1500-en { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; pp3000_en: pp3000-en { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -389,10 +391,10 @@ ap_i2c_tp: &i2c5 { &wifi { wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/dts/rk3399-gru-kevin.dts b/arch/arm/dts/rk3399-gru-kevin.dts index 2cc7c47d6a..2bbef9fcbe 100644 --- a/arch/arm/dts/rk3399-gru-kevin.dts +++ b/arch/arm/dts/rk3399-gru-kevin.dts @@ -39,11 +39,25 @@ }; edp_panel: edp-panel { - compatible = "sharp,lq123p1jx31", "simple-panel"; + compatible = "sharp,lq123p1jx31"; backlight = <&backlight>; power-supply = <&pp3300_disp>; - ports { + panel-timing { + clock-frequency = <266666667>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; }; @@ -118,13 +132,17 @@ map0 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <4096>; }; map1 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <1024>; }; }; @@ -286,24 +304,24 @@ ap_i2c_dig: &i2c2 { digitizer { /* Has external pullup */ cpu1_dig_irq_l: cpu1-dig-irq-l { - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* Has external pullup */ cpu1_dig_pdct_l: cpu1-dig-pdct-l { - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; discrete-regulators { cpu3_pen_pwr_en: cpu3-pen-pwr-en { - rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { cpu1_pen_eject: cpu1-pen-eject { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi index 0e2e047180..34f03cf92d 100644 --- a/arch/arm/dts/rk3399-gru.dtsi +++ b/arch/arm/dts/rk3399-gru.dtsi @@ -11,13 +11,7 @@ / { chosen { - u-boot,dm-pre-reloc; stdout-path = "serial2:115200n8"; - u-boot,spl-boot-order = &spi_flash; - }; - - config { - u-boot,spl-payload-offset = <0x40000>; }; /* @@ -268,17 +262,11 @@ pp5000_usb_a_vbus: pp5000 { }; - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>; - - wake_on_bt: wake-on-bt { - label = "Wake-on-Bluetooth"; - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - wakeup-source; - }; + ap_rtc_clk: ap-rtc-clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + #clock-cells = <0>; }; max98357a: max98357a { @@ -354,6 +342,7 @@ cpu-supply = <&ppvar_bigcpu>; }; + &cru { assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, @@ -549,8 +538,7 @@ ap_i2c_audio: &i2c8 { pinctrl-names = "default", "sleep"; pinctrl-1 = <&spi1_sleep>; - spi_flash: spiflash@0 { - u-boot,dm-pre-reloc; + spiflash@0 { compatible = "jedec,spi-nor"; reg = <0>; @@ -565,16 +553,12 @@ ap_i2c_audio: &i2c8 { &spi5 { status = "okay"; - spi-activate-delay = <100>; - spi-max-frequency = <3000000>; - spi-deactivate-delay = <200>; cros_ec: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&gpio0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - ec-interrupt = <&gpio0 1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_l>; spi-max-frequency = <3000000>; @@ -586,11 +570,9 @@ ap_i2c_audio: &i2c8 { #size-cells = <0>; }; - usbc_extcon0: extcon@0 { + usbc_extcon0: extcon0 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; - - #extcon-cells = <0>; }; }; }; @@ -692,29 +674,29 @@ ap_i2c_audio: &i2c8 { backlight-enable { bl_en: bl-en { - rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; cros-ec { ec_ap_int_l: ec-ap-int-l { - rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; discrete-regulators { sd_io_pwr_en: sd-io-pwr-en { - rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; sd_pwr_1800_sel: sd-pwr-1800-sel { - rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; sd_slot_pwr_en: sd-slot-pwr-en { - rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -722,17 +704,17 @@ ap_i2c_audio: &i2c8 { codec { /* Has external pullup */ headset_int_l: headset-int-l { - rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; }; mic_int: mic-int { - rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; max98357a { sdmode_en: sdmode-en { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -743,7 +725,7 @@ ap_i2c_audio: &i2c8 { * to hack this as gpio, so the EP could be able to * de-assert it along and make ClockPM(CPM) work. */ - rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -754,20 +736,20 @@ ap_i2c_audio: &i2c8 { */ sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB0 1 &pcfg_pull_none_8ma>, + <4 RK_PB1 1 &pcfg_pull_none_8ma>, + <4 RK_PB2 1 &pcfg_pull_none_8ma>, + <4 RK_PB3 1 &pcfg_pull_none_8ma>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB4 1 &pcfg_pull_none_8ma>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB5 1 &pcfg_pull_none_8ma>; }; /* @@ -781,12 +763,12 @@ ap_i2c_audio: &i2c8 { */ sdmmc_cd: sdmmc-cd { rockchip,pins = - <0 7 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA7 1 &pcfg_pull_none>; }; /* This is where we actually hook up CD; has external pull */ sdmmc_cd_gpio: sdmmc-cd-gpio { - rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -796,47 +778,47 @@ ap_i2c_audio: &i2c8 { * Pull down SPI1 CLK/CS/RX/TX during suspend, to * prevent leakage. */ - rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, - <1 10 RK_FUNC_GPIO &pcfg_pull_down>, - <1 7 RK_FUNC_GPIO &pcfg_pull_down>, - <1 8 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; }; }; touchscreen { touch_int_l: touch-int-l { - rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; touch_reset_l: touch-reset-l { - rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; trackpad { ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { - rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>; }; trackpad_int_l: trackpad-int-l { - rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; wifi: wifi { wlan_module_reset_l: wlan-module-reset-l { - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { /* Kevin has an external pull up, but Gru does not */ - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; write-protect { ap_fw_wp: ap-fw-wp { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi index 4944d78a0a..e87a044774 100644 --- a/arch/arm/dts/rk3399-khadas-edge.dtsi +++ b/arch/arm/dts/rk3399-khadas-edge.dtsi @@ -654,9 +654,12 @@ sd-uhs-sdr104; vqmmc-supply = <&vcc1v8_s3>; vmmc-supply = <&vccio_sd>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts index 32baa57b94..73be38a537 100644 --- a/arch/arm/dts/rk3399-leez-p710.dts +++ b/arch/arm/dts/rk3399-leez-p710.dts @@ -42,14 +42,14 @@ regulator-max-microvolt = <5000000>; }; - vcc5v0_sys: vcc5v0-sys { + vcc3v3_lan: vcc3v3-lan { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc3v3_lan"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc5v_adp>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vim-supply = <&vcc3v3_sys>; }; vcc3v3_sys: vcc3v3-sys { @@ -83,14 +83,14 @@ vin-supply = <&vcc5v0_sys>; }; - vcc3v3_lan: vcc3v3-lan { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lan"; + regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vim-supply = <&vcc3v3_sys>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc5v_adp>; }; vdd_log: vdd-log { @@ -510,6 +510,14 @@ }; }; +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -522,14 +530,6 @@ status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - &tcphy0 { status = "okay"; }; diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts index 84433cf02b..e0d75617bb 100644 --- a/arch/arm/dts/rk3399-nanopc-t4.dts +++ b/arch/arm/dts/rk3399-nanopc-t4.dts @@ -52,13 +52,58 @@ pinctrl-names = "default"; pinctrl-0 = <&ir_rx>; }; + + fan: pwm-fan { + compatible = "pwm-fan"; + /* + * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels + * work out to 0, ~1200, ~3000, and 5000RPM respectively. + */ + cooling-levels = <0 12 18 255>; + #cooling-cells = <2>; + fan-supply = <&vcc12v0_sys>; + pwms = <&pwm1 0 50000 0>; + }; +}; + +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&pcie0 { + num-lanes = <4>; + vpcie3v3-supply = <&vcc3v3_sys>; }; &pinctrl { ir { ir_rx: ir-rx { /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ - rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi index d325e11728..c88018a0ef 100644 --- a/arch/arm/dts/rk3399-nanopi4.dtsi +++ b/arch/arm/dts/rk3399-nanopi4.dtsi @@ -48,7 +48,7 @@ }; /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + vcc1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; regulator-always-on; regulator-boot-on; @@ -71,6 +71,27 @@ vin-supply = <&vcc3v3_sys>; }; + /* + * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only + * drives the enable pin, but we can't quite model that. + */ + vcca0v9_s3: vcca0v9-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcca0v9_s3"; + vin-supply = <&vcc1v8_s3>; + }; + + /* As above, actually supplied by vcc3v3_sys */ + vcca1v8_s3: vcca1v8-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_s3"; + vin-supply = <&vcc1v8_s3>; + }; + vbus_typec: vbus-typec { compatible = "regulator-fixed"; regulator-min-microvolt = <5000000>; @@ -148,15 +169,28 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; clock_in_out = "input"; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; + phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpu { @@ -171,6 +205,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <160>; @@ -446,6 +484,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc_1v8>; audio-supply = <&vcca1v8_codec>; @@ -464,7 +506,9 @@ &pcie0 { ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; max-link-speed = <2>; - num-lanes = <4>; + num-lanes = <2>; + vpcie0v9-supply = <&vcca0v9_s3>; + vpcie1v8-supply = <&vcca1v8_s3>; status = "okay"; }; @@ -481,6 +525,16 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { cpu_b_sleep: cpu-b-sleep { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts index cf37b96a6b..f9f7246d4d 100644 --- a/arch/arm/dts/rk3399-orangepi.dts +++ b/arch/arm/dts/rk3399-orangepi.dts @@ -136,13 +136,13 @@ vin-supply = <&vcc_sys>; }; - vcc5v0_typec0: vcc5v0-typec0-regulator { + vbus_typec: vbus-typec-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en>; - regulator-name = "vcc5v0_typec0"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vbus_typec"; vin-supply = <&vcc_sys>; }; @@ -202,14 +202,27 @@ clock_in_out = "input"; phy-supply = <&vcc3v3_s3>; phy-mode = "rgmii"; + phy-handle = <&rtl8211e>; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpu { @@ -419,6 +432,8 @@ compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -436,6 +451,8 @@ compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -472,6 +489,7 @@ compatible = "asahi-kasei,ak09911"; reg = <0x0c>; vdd-supply = <&vcc3v3_s3>; + vid-supply = <&vcc3v3_s3>; }; mpu6500@68 { @@ -504,6 +522,16 @@ pinctrl-0 = <&light_int_l>; vdd-supply = <&vcc3v3_s3>; }; + + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&chg_cc_int_l>; + vbus-supply = <&vbus_typec>; + }; }; &io_domains { @@ -526,7 +554,25 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -536,7 +582,7 @@ sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = - <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -546,7 +592,7 @@ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; - vcc5v0_typec0_en: vcc5v0-typec0-en { + vcc5v0_typec_en: vcc5v0-typec-en { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -595,6 +641,12 @@ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + fusb302 { + chg_cc_int_l: chg-cc-int-l { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pwm0 { @@ -631,9 +683,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; @@ -676,7 +731,7 @@ status = "okay"; u2phy0_otg: otg-port { - phy-supply = <&vcc5v0_typec0>; + phy-supply = <&vbus_typec>; status = "okay"; }; @@ -707,12 +762,14 @@ bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; }; }; diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi index e664779227..0253c6525f 100644 --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi @@ -13,7 +13,7 @@ chosen { stdout-path = "serial0:115200n8"; u-boot,spl-boot-order = \ - "same-as-spl", &spiflash, &sdhci, &sdmmc; + "same-as-spl", &norflash, &sdhci, &sdmmc; }; aliases { @@ -21,10 +21,23 @@ spi1 = &spi5; }; -}; - -&bios_enable { - u-boot,dm-pre-reloc; + /* + * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module + * eMMC and SPI flash powered-down initially (in fact it keeps the + * reset signal asserted). Even though it is an enable signal, we + * model this as a regulator. + */ + bios_enable: bios_enable { + compatible = "regulator-fixed"; + u-boot,dm-pre-reloc; + regulator-name = "bios_enable"; + enable-active-high; + gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; &gpio1 { @@ -35,6 +48,6 @@ u-boot,dm-pre-reloc; }; -&spiflash { +&norflash { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 246a892cb7..07694b196f 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -1,30 +1,74 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH */ #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi" / { - model = "Theobroma Systems RK3399-Q7 SoM"; - compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399"; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_puma>; + pinctrl-0 = <&led_pin_module>; - module_led { + module-led { label = "module_led"; gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; + panic-indicator; }; + }; - sd_card_led { - label = "sd_card_led"; - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; + /* + * Overwrite the opp-table for CPUB as this board uses a different + * regulator (FAN53555) that only allows 10mV steps and therefore + * can't reach the operation point target voltages from rk3399-opp.dtsi + */ + /delete-node/ opp-table1; + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <830000>; + opp-suspend; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <880000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <950000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1030000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1230000>; + turbo-mode; }; }; @@ -35,78 +79,14 @@ #clock-cells = <0>; }; - dw_hdmi_audio: dw-hdmi-audio { - status = "enabled"; - compatible = "rockchip,dw-hdmi-audio"; - #sound-dai-cells = <0>; - }; - - hdmi_codec: hdmi-codec { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "HDMI-CODEC"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - hdmi_sound: hdmi-sound { - status = "disabled"; - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "rockchip,hdmi"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - usbhub_enable: usbhub_enable { + vcc1v2_phy: vcc1v2-phy { compatible = "regulator-fixed"; - regulator-name = "usbhub_enable"; - enable-active-low; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - /* - * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module - * eMMC and SPI flash powered-down initially (in fact it keeps the - * reset signal asserted). Even though it is an enable signal, we - * model this as a regulator. - */ - bios_enable: bios_enable { - compatible = "regulator-fixed"; - regulator-name = "bios_enable"; - enable-active-high; - gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + regulator-name = "vcc1v2_phy"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vccadc_ref: vccadc-ref { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys>; }; vcc3v3_sys: vcc3v3-sys { @@ -116,16 +96,18 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; }; - vcc5v0_otg: vcc5v0-otg-regulator { + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + enable-active-low; pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc5v0_otg"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; regulator-always-on; + vin-supply = <&vcc5v0_sys>; }; vcc5v0_sys: vcc5v0-sys { @@ -136,48 +118,55 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; +}; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - regulator-init-microvolt = <950000>; - }; +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; }; &emmc_phy { status = "okay"; + drive-impedance-ohm = <33>; }; &gmac { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <2 10000 50000>; assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc1v2_phy>; + phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; rx_delay = <0x10>; status = "okay"; }; -&hdmi { - #sound-dai-cells = <0>; +&gpu { + mali-supply = <&vdd_gpu>; status = "okay"; }; @@ -187,37 +176,17 @@ i2c-scl-falling-time-ns = <4>; clock-frequency = <400000>; - vdd_gpu: vdd_gpu { - status = "okay"; - compatible = "fcs,fan53555"; - reg = <0x60>; - vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1230000>; - regulator-ramp-delay = <1000>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-initial-state = <3>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio1>; - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt? + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; @@ -234,44 +203,44 @@ regulators { vdd_center: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_center"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; - regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_l: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_cpu_l"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; - regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -279,32 +248,32 @@ }; vcc_ldo1: LDO_REG1 { - regulator-boot-on; + regulator-name = "vcc_ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_ldo1"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_hdmi: LDO_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc1v8_hdmi"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc1v8_pmu"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -312,11 +281,11 @@ }; vcc_sd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; - regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; @@ -324,79 +293,105 @@ }; vcc_ldo5: LDO_REG5 { - regulator-boot-on; + regulator-name = "vcc_ldo5"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-name = "vcc_ldo5"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ldo6: LDO_REG6 { - regulator-boot-on; + regulator-name = "vcc_ldo6"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - regulator-name = "vcc_ldo6"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc0v9_hdmi: LDO_REG7 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc0v9_hdmi"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; - regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_efuse: LDO_REG8 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_efuse"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_efuse"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc3v3_s3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc3v3_s0"; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; + + vdd_gpu: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1230000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&i2c7 { + status = "okay"; + clock-frequency = <400000>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; }; &i2c8 { status = "okay"; clock-frequency = <400000>; - vdd_cpu_b: vdd_cpu_b { - status = "okay"; + vdd_cpu_b: regulator@60 { compatible = "fcs,fan53555"; reg = <0x60>; - vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1230000>; @@ -404,48 +399,36 @@ fcs,suspend-voltage-selector = <1>; regulator-always-on; regulator-boot-on; - regulator-initial-state = <3>; - regulator-state-mem { - regulator-off-in-suspend; - }; }; }; &i2s0 { + pinctrl-0 = <&i2s0_2ch_bus>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "okay"; - rockchip,i2s-broken-burst-len; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; }; -&i2s2 { - #sound-dai-cells = <0>; - status = "okay"; +/* + * As Q7 does not specify neither a global nor a RX clock for I2S these + * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. + * Therefore we have to redefine the i2s0_2ch_bus definition to prevent + * conflicts. + */ +&i2s0_2ch_bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; }; &io_domains { status = "okay"; - - bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */ - audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */ - sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ - gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */ -}; - -&pcie0 { - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; - assigned-clock-rates = <100000000>; - ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; + bt656-supply = <&vcc_1v8>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vcc_sd>; + gpio1830-supply = <&vcc_1v8>; }; &pmu_io_domains { @@ -453,185 +436,99 @@ pmu1830-supply = <&vcc_1v8>; }; -&pwm0 { - status = "okay"; -}; - &pwm2 { status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - supports-emmc; - non-removable; - keep-power-in-suspend; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - clock-frequency = <150000000>; - max-frequency = <40000000>; - supports-sd; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - num-slots = <1>; - vqmmc-supply = <&vcc_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "disabled"; -}; - -&usb_host0_ohci { - status = "disabled"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usb_host1_ehci { - status = "disabled"; -}; - -&usb_host1_ohci { - status = "disabled"; -}; - -&usbdrd3_1 { - status = "okay"; - tsd,usb-port-power = "usbhub_enable"; -}; - -&vopb { - status = "okay"; -}; - &pinctrl { - /* Pins that are not explicitely used by any devices */ - pinctrl-names = "default"; - pinctrl-0 = <&puma_pin_hog>; - - hog { - puma_pin_hog: puma_pin_hog { + i2c8 { + i2c8_xfer_a: i2c8-xfer { rockchip,pins = - /* We need pull-ups on Q7 buttons */ - <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */ - <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */ + <1 RK_PC4 1 &pcfg_pull_up>, + <1 RK_PC5 1 &pcfg_pull_up>; }; }; - pmic { - pmic_int_l: pmic-int-l { + leds { + led_pin_module: led-module-gpio { rockchip,pins = - <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - leds_pins_puma: led_pins@0 { - rockchip,pins = - <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>, - <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - usb2 { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = - <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - host_vbus_drv: host-vbus-drv { + pmic { + pmic_int_l: pmic-int-l { rockchip,pins = - <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - i2c8 { - i2c8_xfer_a: i2c8-xfer { + usb2 { + vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -&i2c1 { +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; status = "okay"; - clock-frequency = <400000>; }; -&i2c2 { - status = "okay"; - clock-frequency = <400000>; + +&sdmmc { + vqmmc-supply = <&vcc_sd>; }; -&i2c4 { + +&spi1 { status = "okay"; - clock-frequency = <400000>; + + norflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; }; -&i2c6 { + +&tcphy1 { status = "okay"; - clock-frequency = <400000>; }; -&i2c6_xfer { - /* Enable pull-ups, the pins would float otherwise. */ - rockchip,pins = - <RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>, - <RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; }; -&i2c7 { +&u2phy1 { status = "okay"; - clock-frequency = <400000>; - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; + u2phy1_otg: otg-port { + status = "okay"; }; - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - cooling-min-state = <0>; - cooling-max-state = <9>; - #cooling-cells = <2>; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; +&usbdrd3_1 { status = "okay"; }; - -&spi1 { +&usbdrd_dwc3_1 { status = "okay"; + dr_mode = "host"; +}; - #address-cells = <1>; - #size-cells = <0>; - - spiflash: w25q32dw@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <49500000>; - spi-cpol; - spi-cpha; - }; +&usb_host1_ehci { + status = "okay"; }; -&spi5 { +&usb_host1_ohci { status = "okay"; }; diff --git a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi index 5746442981..141dd0b306 100644 --- a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi +++ b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi @@ -14,9 +14,45 @@ chosen { u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; }; + + vcc_hub_en: vcc_hub_en-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_rst>; + regulator-name = "vcc_hub_en"; + regulator-always-on; + }; +}; + +/* + * should be placed inside mp8859, but not until mp8859 has + * its own dt-binding. + */ +&dc_12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_vbus_typec0>; }; &vdd_log { regulator-min-microvolt = <430000>; regulator-init-microvolt = <950000>; }; + +&vcc5v0_host { + regulator-always-on; +}; + +&vcc_sys { + regulator-always-on; +}; + +&vcc_sdio { + regulator-always-on; +}; diff --git a/arch/arm/dts/rk3399-roc-pc.dts b/arch/arm/dts/rk3399-roc-pc.dts index 6a909e4eef..cd41954253 100644 --- a/arch/arm/dts/rk3399-roc-pc.dts +++ b/arch/arm/dts/rk3399-roc-pc.dts @@ -8,6 +8,5 @@ / { model = "Firefly ROC-RK3399-PC Board"; - compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc", - "rockchip,rk3399"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; }; diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi index 9a1ce3a4ae..9f225e9c3d 100644 --- a/arch/arm/dts/rk3399-roc-pc.dtsi +++ b/arch/arm/dts/rk3399-roc-pc.dtsi @@ -110,20 +110,6 @@ regulator-max-microvolt = <5000000>; }; - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - dc_12v: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -176,7 +162,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en &hub_rst>; regulator-name = "vcc5v0_host"; - regulator-always-on; vin-supply = <&vcc_sys>; }; @@ -198,7 +183,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc_sys_en>; regulator-name = "vcc_sys"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -392,7 +376,6 @@ vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; @@ -549,6 +532,24 @@ vbus-supply = <&vcc_vbus_typec0>; status = "okay"; }; + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_vbus_typec0>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <12000000>; + }; + }; + }; }; &i2s0 { diff --git a/arch/arm/dts/rk3399-rock-pi-4.dts b/arch/arm/dts/rk3399-rock-pi-4.dts index 4a543f2117..3923ec01ef 100644 --- a/arch/arm/dts/rk3399-rock-pi-4.dts +++ b/arch/arm/dts/rk3399-rock-pi-4.dts @@ -25,6 +25,15 @@ #clock-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -44,6 +53,16 @@ vin-supply = <&vcc12v_dcin>; }; + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -157,12 +176,22 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { + ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -444,13 +473,60 @@ pmu1830-supply = <&vcc_3v0>; }; +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + pinctrl-names = "default"; + vpcie0v9-supply = <&vcc_0v9>; + vpcie1v8-supply = <&vcc_1v8>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + sdio0 { + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -476,6 +552,16 @@ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -488,6 +574,32 @@ vref-supply = <&vcc_1v8>; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -551,6 +663,23 @@ }; }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts index 12285c51cc..437a75f31a 100644 --- a/arch/arm/dts/rk3399-rock960.dts +++ b/arch/arm/dts/rk3399-rock960.dts @@ -114,6 +114,55 @@ }; }; +&spi0 { + /* On Low speed expansion (LS-SPI0) */ + status = "okay"; +}; + +&spi4 { + /* On High speed expansion (HS-SPI1) */ + status = "okay"; +}; + +&thermal_zones { + cpu_thermal: cpu { + polling-delay-passive = <100>; + polling-delay = <1000>; + thermal-sensors = <&tsadc 0>; + sustainable-power = <1550>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <65000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + + trip = <&cpu_alert1>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + &usbdrd_dwc3_0 { dr_mode = "otg"; }; diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi index c7d48d41e1..ba7c75c9f2 100644 --- a/arch/arm/dts/rk3399-rock960.dtsi +++ b/arch/arm/dts/rk3399-rock960.dtsi @@ -76,6 +76,15 @@ regulator-always-on; vin-supply = <&vcc5v0_sys>; }; + + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; }; &cpu_l0 { @@ -384,6 +393,8 @@ num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie0v9-supply = <&vcc_0v9>; + vpcie1v8-supply = <&vcca_1v8>; vpcie3v3-supply = <&vcc3v3_pcie>; status = "okay"; }; @@ -531,7 +542,7 @@ cap-mmc-highspeed; cap-sd-highspeed; clock-frequency = <100000000>; - clock-freq-min-max = <100000 100000000>; + max-frequency = <100000000>; cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; disable-wp; sd-uhs-sdr104; diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts index e544deb61d..4b42717800 100644 --- a/arch/arm/dts/rk3399-rockpro64.dts +++ b/arch/arm/dts/rk3399-rockpro64.dts @@ -2,752 +2,29 @@ /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> */ /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-rockpro64.dtsi" / { - model = "Pine64 RockPro64"; - compatible = "pine64,rockpro64", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; - - work-led { - label = "work"; - default-state = "on"; - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - diy-led { - label = "diy"; - default-state = "off"; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - }; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - fan-supply = <&vcc12v_dcin>; - pwms = <&pwm1 0 50000 0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc12v_dcin: vcc12v-dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr_en>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1700000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio3>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_touch: LDO_REG2 { - regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; + model = "Pine64 RockPro64 v2.1"; + compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399"; }; &i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc5v0_typec>; - status = "okay"; - }; -}; + es8316: codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; -}; - -&pcie0 { - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_perst>; - vpcie12v-supply = <&vcc12v_dcin>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - fusb302x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - work_led_gpio: work_led-gpio { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_gpio: diy_led-gpio { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_perst: pcie-perst { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_pwr_en: pcie-pwr-en { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0_typec_en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; }; }; }; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&spi1 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "otg"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi new file mode 100644 index 0000000000..9bca258012 --- /dev/null +++ b/arch/arm/dts/rk3399-rockpro64.dtsi @@ -0,0 +1,797 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + */ + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm1 0 50000 0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3399"; + dais = <&i2s1_p0>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1700000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_perst: pcie-perst { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi index 8b857ccfc7..ef57c36e73 100644 --- a/arch/arm/dts/rk3399-u-boot.dtsi +++ b/arch/arm/dts/rk3399-u-boot.dtsi @@ -79,6 +79,7 @@ }; &sdhci { + max-frequency = <200000000>; u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi index 6b7c136ab8..74f2c3d490 100644 --- a/arch/arm/dts/rk3399.dtsi +++ b/arch/arm/dts/rk3399.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd */ #include <dt-bindings/clock/rk3399-cru.h> @@ -19,6 +19,7 @@ #size-cells = <2>; aliases { + ethernet0 = &gmac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -67,53 +68,102 @@ cpu_l0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_b0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_b1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + }; + }; + + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; }; pmu_a53 { @@ -147,7 +197,7 @@ #clock-cells = <0>; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -183,7 +233,7 @@ #size-cells = <2>; #interrupt-cells = <1>; aspm-no-l0s; - bus-range = <0x0 0x1>; + bus-range = <0x0 0x1f>; clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; clock-names = "aclk", "aclk-perf", @@ -200,10 +250,12 @@ linux,pci-domain = <0>; max-link-speed = <1>; msi-map = <0x0 &its 0x0 0x1000>; - phys = <&pcie_phy>; - phy-names = "pcie-phy"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 - 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + phys = <&pcie_phy 0>, <&pcie_phy 1>, + <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", + "pcie-phy-2", "pcie-phy-3"; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 + 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, @@ -236,10 +288,11 @@ resets = <&cru SRST_A_GMAC>; reset-names = "stmmaceth"; rockchip,grf = <&grf>; + snps,txpbl = <0x4>; status = "disabled"; }; - sdio0: dwmmc@fe310000 { + sdio0: mmc@fe310000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; @@ -255,12 +308,14 @@ status = "disabled"; }; - sdmmc: dwmmc@fe320000 { + sdmmc: mmc@fe320000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; max-frequency = <150000000>; + assigned-clocks = <&cru HCLK_SD>; + assigned-clock-rates = <200000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -278,7 +333,6 @@ arasan,soc-ctl-syscon = <&grf>; assigned-clocks = <&cru SCLK_EMMC>; assigned-clock-rates = <200000000>; - max-frequency = <200000000>; clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; clock-names = "clk_xin", "clk_ahb"; clock-output-names = "emmc_cardclock"; @@ -286,6 +340,7 @@ phys = <&emmc_phy>; phy-names = "phy_arasan"; power-domains = <&power RK3399_PD_EMMC>; + disable-cqe-dcmd; status = "disabled"; }; @@ -295,11 +350,8 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, <&u2phy0>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; - power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; @@ -309,11 +361,8 @@ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, <&u2phy0>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; - power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; @@ -323,11 +372,8 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, <&u2phy1>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; - power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; @@ -337,15 +383,12 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, <&u2phy1>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; - power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; - usbdrd3_0: dwc3_typec0: usb@fe800000 { + usbdrd3_0: usb@fe800000 { compatible = "rockchip,rk3399-dwc3"; #address-cells = <2>; #size-cells = <2>; @@ -364,6 +407,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, + <&cru SCLK_USB3OTG0_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy0_otg>, <&tcphy0_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -378,7 +424,7 @@ }; }; - dwc3_typec1: usbdrd3_1: usb@fe900000 { + usbdrd3_1: usb@fe900000 { compatible = "rockchip,rk3399-dwc3"; #address-cells = <2>; #size-cells = <2>; @@ -397,6 +443,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, + <&cru SCLK_USB3OTG1_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy1_otg>, <&tcphy1_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -464,6 +513,7 @@ its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xfee20000 0x0 0x20000>; }; @@ -612,7 +662,6 @@ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; - clock-frequency = <24000000>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -639,6 +688,8 @@ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 10>, <&dmac_peri 11>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; #address-cells = <1>; @@ -652,6 +703,8 @@ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 12>, <&dmac_peri 13>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; #address-cells = <1>; @@ -665,6 +718,8 @@ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 14>, <&dmac_peri 15>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; #address-cells = <1>; @@ -678,6 +733,8 @@ clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 18>, <&dmac_peri 19>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; #address-cells = <1>; @@ -691,8 +748,11 @@ clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; clock-names = "spiclk", "apb_pclk"; interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_bus 8>, <&dmac_bus 9>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -727,13 +787,18 @@ map0 { trip = <&cpu_alert0>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_alert1>; cooling-device = <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -761,7 +826,7 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -980,22 +1045,11 @@ <&cru PCLK_GMAC>; pm_qos = <&qos_gmac>; }; - pd_perihp@RK3399_PD_PERIHP { - reg = <RK3399_PD_PERIHP>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cru ACLK_PERIHP>; - pm_qos = <&qos_perihp>, - <&qos_pcie>, - <&qos_usb_host0>, - <&qos_usb_host1>; - - pd_sd@RK3399_PD_SD { - reg = <RK3399_PD_SD>; - clocks = <&cru HCLK_SDMMC>, - <&cru SCLK_SDMMC>; - pm_qos = <&qos_sd>; - }; + pd_sd@RK3399_PD_SD { + reg = <RK3399_PD_SD>; + clocks = <&cru HCLK_SDMMC>, + <&cru SCLK_SDMMC>; + pm_qos = <&qos_sd>; }; pd_sdioaudio@RK3399_PD_SDIOAUDIO { reg = <RK3399_PD_SDIOAUDIO>; @@ -1070,6 +1124,8 @@ pmugrf: syscon@ff320000 { compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff320000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; pmu_io_domains: io-domains { compatible = "rockchip,rk3399-pmu-io-voltage-domain"; @@ -1192,6 +1248,62 @@ status = "disabled"; }; + vpu: video-codec@ff650000 { + compatible = "rockchip,rk3399-vpu"; + reg = <0x0 0xff650000 0x0 0x800>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3399_PD_VCODEC>; + }; + + vpu_mmu: iommu@ff650800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff650800 0x0 0x40>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vpu_mmu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3399_PD_VCODEC>; + }; + + vdec_mmu: iommu@ff660480 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdec_mmu"; + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + status = "disabled"; + }; + + iep_mmu: iommu@ff670800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff670800 0x0 0x40>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "iep_mmu"; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + status = "disabled"; + }; + + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0x0 0xff680000 0x0 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core", "axi", "ahb"; + power-domains = <&power RK3399_PD_RGA>; + }; + efuse0: efuse@ff690000 { compatible = "rockchip,rk3399-efuse"; reg = <0x0 0xff690000 0x0 0x80>; @@ -1342,8 +1454,9 @@ compatible = "rockchip,rk3399-pcie-phy"; clocks = <&cru SCLK_PCIEPHY_REF>; clock-names = "refclk"; - #phy-cells = <0>; + #phy-cells = <1>; resets = <&cru SRST_PCIEPHY>; + drive-impedance-ohm = <50>; reset-names = "phy"; status = "disabled"; }; @@ -1592,11 +1705,11 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp0_mmu"; - clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>; + clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP0>; rockchip,disable-mmu-reset; - status = "disabled"; }; isp1_mmu: iommu@ff924000 { @@ -1604,11 +1717,11 @@ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp1_mmu"; - clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>; + clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP1>; rockchip,disable-mmu-reset; - status = "disabled"; }; hdmi_sound: hdmi-sound { @@ -1660,21 +1773,29 @@ }; mipi_dsi: mipi@ff960000 { - compatible = "rockchip,rk3399_mipi_dsi"; + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x8000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, - <&cru SCLK_DPHY_TX0_CFG>; - clock-names = "ref", "pclk", "phy_cfg"; + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; + clock-names = "ref", "pclk", "phy_cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + resets = <&cru SRST_P_MIPI_DSI0>; + reset-names = "apb"; rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; + ports { - reg = <1>; - mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; + mipi_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_mipi>; @@ -1698,6 +1819,8 @@ resets = <&cru SRST_P_MIPI_DSI1>; reset-names = "apb"; rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; ports { @@ -1765,6 +1888,7 @@ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "gpu", "job", "mmu"; clocks = <&cru ACLK_GPU>; + #cooling-cells = <2>; power-domains = <&power RK3399_PD_GPU>; status = "disabled"; }; @@ -1929,14 +2053,14 @@ clock { clk_32k: clk-32k { - rockchip,pins = <0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; }; edp { edp_hpd: edp-hpd { rockchip,pins = - <4 RK_PC7 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC7 2 &pcfg_pull_none>; }; }; @@ -1944,382 +2068,409 @@ rgmii_pins: rgmii-pins { rockchip,pins = /* mac_txclk */ - <3 RK_PC1 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PC1 1 &pcfg_pull_none_13ma>, /* mac_rxclk */ - <3 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB6 1 &pcfg_pull_none>, /* mac_mdio */ - <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB5 1 &pcfg_pull_none>, /* mac_txen */ - <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PB4 1 &pcfg_pull_none_13ma>, /* mac_clk */ - <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB3 1 &pcfg_pull_none>, /* mac_rxdv */ - <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB1 1 &pcfg_pull_none>, /* mac_mdc */ - <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none>, /* mac_rxd1 */ - <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>, /* mac_rxd0 */ - <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, /* mac_txd1 */ - <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA5 1 &pcfg_pull_none_13ma>, /* mac_txd0 */ - <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA4 1 &pcfg_pull_none_13ma>, /* mac_rxd3 */ - <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA3 1 &pcfg_pull_none>, /* mac_rxd2 */ - <3 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA2 1 &pcfg_pull_none>, /* mac_txd3 */ - <3 RK_PA1 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA1 1 &pcfg_pull_none_13ma>, /* mac_txd2 */ - <3 RK_PA0 RK_FUNC_1 &pcfg_pull_none_13ma>; + <3 RK_PA0 1 &pcfg_pull_none_13ma>; }; rmii_pins: rmii-pins { rockchip,pins = /* mac_mdio */ - <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB5 1 &pcfg_pull_none>, /* mac_txen */ - <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PB4 1 &pcfg_pull_none_13ma>, /* mac_clk */ - <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB3 1 &pcfg_pull_none>, /* mac_rxer */ - <3 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB2 1 &pcfg_pull_none>, /* mac_rxdv */ - <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB1 1 &pcfg_pull_none>, /* mac_mdc */ - <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none>, /* mac_rxd1 */ - <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>, /* mac_rxd0 */ - <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, /* mac_txd1 */ - <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA5 1 &pcfg_pull_none_13ma>, /* mac_txd0 */ - <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>; + <3 RK_PA4 1 &pcfg_pull_none_13ma>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = - <1 RK_PB7 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; + <1 RK_PB7 2 &pcfg_pull_none>, + <1 RK_PC0 2 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { rockchip,pins = - <4 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, - <4 RK_PA1 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA2 1 &pcfg_pull_none>, + <4 RK_PA1 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { rockchip,pins = - <2 RK_PA1 RK_FUNC_2 &pcfg_pull_none_12ma>, - <2 RK_PA0 RK_FUNC_2 &pcfg_pull_none_12ma>; + <2 RK_PA1 2 &pcfg_pull_none_12ma>, + <2 RK_PA0 2 &pcfg_pull_none_12ma>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { rockchip,pins = - <4 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, - <4 RK_PC0 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC1 1 &pcfg_pull_none>, + <4 RK_PC0 1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { rockchip,pins = - <1 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, - <1 RK_PB3 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB4 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { rockchip,pins = - <3 RK_PB3 RK_FUNC_2 &pcfg_pull_none>, - <3 RK_PB2 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB3 2 &pcfg_pull_none>, + <3 RK_PB2 2 &pcfg_pull_none>; }; }; i2c6 { i2c6_xfer: i2c6-xfer { rockchip,pins = - <2 RK_PB2 RK_FUNC_2 &pcfg_pull_none>, - <2 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB2 2 &pcfg_pull_none>, + <2 RK_PB1 2 &pcfg_pull_none>; }; }; i2c7 { i2c7_xfer: i2c7-xfer { rockchip,pins = - <2 RK_PB0 RK_FUNC_2 &pcfg_pull_none>, - <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB0 2 &pcfg_pull_none>, + <2 RK_PA7 2 &pcfg_pull_none>; }; }; i2c8 { i2c8_xfer: i2c8-xfer { rockchip,pins = - <1 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, - <1 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC5 1 &pcfg_pull_none>, + <1 RK_PC4 1 &pcfg_pull_none>; }; }; i2s0 { + i2s0_2ch_bus: i2s0-2ch-bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; + i2s0_8ch_bus: i2s0-8ch-bus { rockchip,pins = - <3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>, - <3 RK_PD1 RK_FUNC_1 &pcfg_pull_none>, - <3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>, - <3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>, - <3 RK_PD4 RK_FUNC_1 &pcfg_pull_none>, - <3 RK_PD5 RK_FUNC_1 &pcfg_pull_none>, - <3 RK_PD6 RK_FUNC_1 &pcfg_pull_none>, - <3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>, - <4 RK_PA0 RK_FUNC_1 &pcfg_pull_none>; + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; }; }; i2s1 { i2s1_2ch_bus: i2s1-2ch-bus { rockchip,pins = - <4 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, - <4 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, - <4 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, - <4 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, - <4 RK_PA7 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA3 1 &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; }; }; sdio0 { sdio0_bus1: sdio0-bus1 { rockchip,pins = - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PC4 1 &pcfg_pull_up>; }; sdio0_bus4: sdio0-bus4 { rockchip,pins = - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PC4 1 &pcfg_pull_up>, + <2 RK_PC5 1 &pcfg_pull_up>, + <2 RK_PC6 1 &pcfg_pull_up>, + <2 RK_PC7 1 &pcfg_pull_up>; }; sdio0_cmd: sdio0-cmd { rockchip,pins = - <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD0 1 &pcfg_pull_up>; }; sdio0_clk: sdio0-clk { rockchip,pins = - <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PD1 1 &pcfg_pull_none>; }; sdio0_cd: sdio0-cd { rockchip,pins = - <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD2 1 &pcfg_pull_up>; }; sdio0_pwr: sdio0-pwr { rockchip,pins = - <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD3 1 &pcfg_pull_up>; }; sdio0_bkpwr: sdio0-bkpwr { rockchip,pins = - <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD4 1 &pcfg_pull_up>; }; sdio0_wp: sdio0-wp { rockchip,pins = - <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA3 1 &pcfg_pull_up>; }; sdio0_int: sdio0-int { rockchip,pins = - <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA4 1 &pcfg_pull_up>; }; }; sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 1 &pcfg_pull_up>, + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB2 1 &pcfg_pull_up>, + <4 RK_PB3 1 &pcfg_pull_up>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PB4 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB5 1 &pcfg_pull_up>; }; sdmmc_cd: sdmmc-cd { rockchip,pins = - <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA7 1 &pcfg_pull_up>; }; sdmmc_wp: sdmmc-wp { rockchip,pins = - <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PB0 1 &pcfg_pull_up>; }; }; sleep { ap_pwroff: ap-pwroff { - rockchip,pins = <1 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; }; ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; }; }; spdif { spdif_bus: spdif-bus { rockchip,pins = - <4 RK_PC5 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC5 1 &pcfg_pull_none>; }; spdif_bus_1: spdif-bus-1 { rockchip,pins = - <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + <3 RK_PC0 3 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { rockchip,pins = - <3 RK_PA6 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA6 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { rockchip,pins = - <3 RK_PA7 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA7 2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { rockchip,pins = - <3 RK_PB0 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PB0 2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { rockchip,pins = - <3 RK_PA5 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA5 2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { rockchip,pins = - <3 RK_PA4 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA4 2 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { rockchip,pins = - <1 RK_PB1 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB1 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { rockchip,pins = - <1 RK_PB2 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB2 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { rockchip,pins = - <1 RK_PA7 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PA7 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { rockchip,pins = - <1 RK_PB0 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB0 2 &pcfg_pull_up>; }; }; spi2 { spi2_clk: spi2-clk { rockchip,pins = - <2 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB3 1 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { rockchip,pins = - <2 RK_PB4 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB4 1 &pcfg_pull_up>; }; spi2_rx: spi2-rx { rockchip,pins = - <2 RK_PB1 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB1 1 &pcfg_pull_up>; }; spi2_tx: spi2-tx { rockchip,pins = - <2 RK_PB2 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB2 1 &pcfg_pull_up>; }; }; spi3 { spi3_clk: spi3-clk { rockchip,pins = - <1 RK_PC1 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC1 1 &pcfg_pull_up>; }; spi3_cs0: spi3-cs0 { rockchip,pins = - <1 RK_PC2 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC2 1 &pcfg_pull_up>; }; spi3_rx: spi3-rx { rockchip,pins = - <1 RK_PB7 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PB7 1 &pcfg_pull_up>; }; spi3_tx: spi3-tx { rockchip,pins = - <1 RK_PC0 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC0 1 &pcfg_pull_up>; }; }; spi4 { spi4_clk: spi4-clk { rockchip,pins = - <3 RK_PA2 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA2 2 &pcfg_pull_up>; }; spi4_cs0: spi4-cs0 { rockchip,pins = - <3 RK_PA3 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA3 2 &pcfg_pull_up>; }; spi4_rx: spi4-rx { rockchip,pins = - <3 RK_PA0 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA0 2 &pcfg_pull_up>; }; spi4_tx: spi4-tx { rockchip,pins = - <3 RK_PA1 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA1 2 &pcfg_pull_up>; }; }; spi5 { spi5_clk: spi5-clk { rockchip,pins = - <2 RK_PC6 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC6 2 &pcfg_pull_up>; }; spi5_cs0: spi5-cs0 { rockchip,pins = - <2 RK_PC7 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC7 2 &pcfg_pull_up>; }; spi5_rx: spi5-rx { rockchip,pins = - <2 RK_PC4 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC4 2 &pcfg_pull_up>; }; spi5_tx: spi5-tx { rockchip,pins = - <2 RK_PC5 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC5 2 &pcfg_pull_up>; + }; + }; + + testclk { + test_clkout0: test-clkout0 { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none>; + }; + + test_clkout1: test-clkout1 { + rockchip,pins = + <2 RK_PD1 2 &pcfg_pull_none>; + }; + + test_clkout2: test-clkout2 { + rockchip,pins = + <0 RK_PB0 3 &pcfg_pull_none>; }; }; @@ -2329,168 +2480,168 @@ }; otp_out: otp-out { - rockchip,pins = <1 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { rockchip,pins = - <2 RK_PC0 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC0 1 &pcfg_pull_up>, + <2 RK_PC1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { rockchip,pins = - <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC2 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { rockchip,pins = - <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { rockchip,pins = - <3 RK_PB4 RK_FUNC_2 &pcfg_pull_up>, - <3 RK_PB5 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB4 2 &pcfg_pull_up>, + <3 RK_PB5 2 &pcfg_pull_none>; }; }; uart2a { uart2a_xfer: uart2a-xfer { rockchip,pins = - <4 RK_PB0 RK_FUNC_2 &pcfg_pull_up>, - <4 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PB0 2 &pcfg_pull_up>, + <4 RK_PB1 2 &pcfg_pull_none>; }; }; uart2b { uart2b_xfer: uart2b-xfer { rockchip,pins = - <4 RK_PC0 RK_FUNC_2 &pcfg_pull_up>, - <4 RK_PC1 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC0 2 &pcfg_pull_up>, + <4 RK_PC1 2 &pcfg_pull_none>; }; }; uart2c { uart2c_xfer: uart2c-xfer { rockchip,pins = - <4 RK_PC3 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC3 1 &pcfg_pull_up>, + <4 RK_PC4 1 &pcfg_pull_none>; }; }; uart3 { uart3_xfer: uart3-xfer { rockchip,pins = - <3 RK_PB6 RK_FUNC_2 &pcfg_pull_up>, - <3 RK_PB7 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB6 2 &pcfg_pull_up>, + <3 RK_PB7 2 &pcfg_pull_none>; }; uart3_cts: uart3-cts { rockchip,pins = - <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC0 2 &pcfg_pull_none>; }; uart3_rts: uart3-rts { rockchip,pins = - <3 RK_PC3 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC1 2 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { rockchip,pins = - <1 RK_PA7 RK_FUNC_1 &pcfg_pull_up>, - <1 RK_PB0 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PA7 1 &pcfg_pull_up>, + <1 RK_PB0 1 &pcfg_pull_none>; }; }; uarthdcp { uarthdcp_xfer: uarthdcp-xfer { rockchip,pins = - <4 RK_PC5 RK_FUNC_2 &pcfg_pull_up>, - <4 RK_PC6 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC5 2 &pcfg_pull_up>, + <4 RK_PC6 2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC2 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <4 RK_PC2 1 &pcfg_pull_down>; }; vop0_pwm_pin: vop0-pwm-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC2 2 &pcfg_pull_none>; + }; + + vop1_pwm_pin: vop1-pwm-pin { + rockchip,pins = + <4 RK_PC2 3 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { rockchip,pins = - <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC6 1 &pcfg_pull_none>; }; - vop1_pwm_pin: vop1-pwm-pin { + pwm1_pin_pull_down: pwm1-pin-pull-down { rockchip,pins = - <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC6 1 &pcfg_pull_down>; }; }; pwm2 { pwm2_pin: pwm2-pin { rockchip,pins = - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC3 1 &pcfg_pull_none>; }; pwm2_pin_pull_down: pwm2-pin-pull-down { rockchip,pins = - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>; + <1 RK_PC3 1 &pcfg_pull_down>; }; }; pwm3a { pwm3a_pin: pwm3a-pin { rockchip,pins = - <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA6 1 &pcfg_pull_none>; }; }; pwm3b { pwm3b_pin: pwm3b-pin { rockchip,pins = - <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB6 1 &pcfg_pull_none>; }; }; hdmi { hdmi_i2c_xfer: hdmi-i2c-xfer { rockchip,pins = - <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>, - <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC1 3 &pcfg_pull_none>, + <4 RK_PC0 3 &pcfg_pull_none>; }; hdmi_cec: hdmi-cec { rockchip,pins = - <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC7 1 &pcfg_pull_none>; }; }; pcie { - pcie_clkreqn: pci-clkreqn { - rockchip,pins = - <2 RK_PD2 RK_FUNC_2 &pcfg_pull_none>; - }; - - pcie_clkreqnb: pci-clkreqnb { - rockchip,pins = - <4 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; - }; - pcie_clkreqn_cpm: pci-clkreqn-cpm { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
Sync rk3399 dts(i) files from v5.7-rc1 linux-next. Reason: To get updated PCIe nodes and properties on respective dts(i) files. Summary: - sync won't include new board dts(i) - sync will add required files used on respective dts(i) - rk3399-puma-u-boot.dtsi spiflash label changed to norflash - move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi - move legacy max-frequency of sdhci into rk3399-u-boot.dtsi - update cross-ec-[keyboard|sbs].dtsi path as per U-Boot - keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi arch/arm/dts/cros-ec-keyboard.dtsi | 10 +- arch/arm/dts/cros-ec-sbs.dtsi | 39 +- arch/arm/dts/rk3399-evb.dts | 520 +++++++++++----- arch/arm/dts/rk3399-ficus.dts | 6 + arch/arm/dts/rk3399-firefly.dts | 251 ++++++-- arch/arm/dts/rk3399-gru-bob.dts | 16 +- arch/arm/dts/rk3399-gru-chromebook.dtsi | 40 +- arch/arm/dts/rk3399-gru-kevin.dts | 34 +- arch/arm/dts/rk3399-gru.dtsi | 90 ++- arch/arm/dts/rk3399-khadas-edge.dtsi | 3 + arch/arm/dts/rk3399-leez-p710.dts | 36 +- arch/arm/dts/rk3399-nanopc-t4.dts | 47 +- arch/arm/dts/rk3399-nanopi4.dtsi | 66 +- arch/arm/dts/rk3399-orangepi.dts | 79 ++- arch/arm/dts/rk3399-puma-u-boot.dtsi | 25 +- arch/arm/dts/rk3399-puma.dtsi | 567 +++++++---------- arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 36 ++ arch/arm/dts/rk3399-roc-pc.dts | 3 +- arch/arm/dts/rk3399-roc-pc.dtsi | 35 +- arch/arm/dts/rk3399-rock-pi-4.dts | 129 ++++ arch/arm/dts/rk3399-rock960.dts | 49 ++ arch/arm/dts/rk3399-rock960.dtsi | 13 +- arch/arm/dts/rk3399-rockpro64.dts | 751 +--------------------- arch/arm/dts/rk3399-rockpro64.dtsi | 797 ++++++++++++++++++++++++ arch/arm/dts/rk3399-u-boot.dtsi | 1 + arch/arm/dts/rk3399.dtsi | 583 ++++++++++------- 26 files changed, 2574 insertions(+), 1652 deletions(-) create mode 100644 arch/arm/dts/rk3399-rockpro64.dtsi