@@ -91,6 +91,7 @@ obj-y += dfu/
obj-$(CONFIG_PCH) += pch/
obj-y += phy/allwinner/
obj-y += phy/marvell/
+obj-y += phy/rockchip/
obj-y += rtc/
obj-y += scsi/
obj-y += sound/
@@ -217,4 +217,5 @@ config PHY_MTK_TPHY
multi-ports is first version, otherwise is second veriosn,
so you can easily distinguish them by banks layout.
+source "drivers/phy/rockchip/Kconfig"
endmenu
new file mode 100644
@@ -0,0 +1,14 @@
+#
+# Phy drivers for Rockchip platforms
+#
+
+menu "Rockchip PHY driver"
+
+config PHY_ROCKCHIP_INNO_USB2
+ bool "Rockchip INNO USB2PHY Driver"
+ depends on ARCH_ROCKCHIP
+ select PHY
+ help
+ Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
+endmenu
new file mode 100644
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Amarula Solutions(India)
+#
+
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
new file mode 100644
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2020 Amarula Solutions(India)
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/lists.h>
+#include <generic-phy.h>
+#include <reset.h>
+#include <syscon.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <linux/iopoll.h>
+#include <asm/arch-rockchip/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define usleep_range(a, b) udelay((b))
+#define BIT_WRITEABLE_SHIFT 16
+
+enum rockchip_usb2phy_port_id {
+ USB2PHY_PORT_OTG,
+ USB2PHY_PORT_HOST,
+ USB2PHY_NUM_PORTS,
+};
+
+struct usb2phy_reg {
+ unsigned int offset;
+ unsigned int bitend;
+ unsigned int bitstart;
+ unsigned int disable;
+ unsigned int enable;
+};
+
+struct rockchip_usb2phy_port_cfg {
+ struct usb2phy_reg phy_sus;
+ struct usb2phy_reg bvalid_det_en;
+ struct usb2phy_reg bvalid_det_st;
+ struct usb2phy_reg bvalid_det_clr;
+ struct usb2phy_reg ls_det_en;
+ struct usb2phy_reg ls_det_st;
+ struct usb2phy_reg ls_det_clr;
+ struct usb2phy_reg utmi_avalid;
+ struct usb2phy_reg utmi_bvalid;
+ struct usb2phy_reg utmi_ls;
+ struct usb2phy_reg utmi_hstdet;
+};
+
+struct rockchip_usb2phy_cfg {
+ unsigned int reg;
+ const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
+};
+
+struct rockchip_usb2phy {
+ void *reg_base;
+ struct clk phyclk;
+ const struct rockchip_usb2phy_cfg *phy_cfg;
+};
+
+static inline int property_enable(void *reg_base,
+ const struct usb2phy_reg *reg, bool en)
+{
+ unsigned int val, mask, tmp;
+
+ tmp = en ? reg->enable : reg->disable;
+ mask = GENMASK(reg->bitend, reg->bitstart);
+ val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+ return writel(val, reg_base + reg->offset);
+}
+
+static const
+struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy)
+{
+ struct udevice *parent = dev_get_parent(phy->dev);
+ struct rockchip_usb2phy *priv = dev_get_priv(parent);
+ const struct rockchip_usb2phy_cfg *phy_cfg = priv->phy_cfg;
+
+ return &phy_cfg->port_cfgs[phy->id];
+}
+
+static int rockchip_usb2phy_power_on(struct phy *phy)
+{
+ struct udevice *parent = dev_get_parent(phy->dev);
+ struct rockchip_usb2phy *priv = dev_get_priv(parent);
+ const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+
+ property_enable(priv->reg_base, &port_cfg->phy_sus, false);
+
+ /* waiting for the utmi_clk to become stable */
+ usleep_range(1500, 2000);
+
+ return 0;
+}
+
+static int rockchip_usb2phy_power_off(struct phy *phy)
+{
+ struct udevice *parent = dev_get_parent(phy->dev);
+ struct rockchip_usb2phy *priv = dev_get_priv(parent);
+ const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+
+ property_enable(priv->reg_base, &port_cfg->phy_sus, true);
+
+ return 0;
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+ struct udevice *parent = dev_get_parent(phy->dev);
+ struct rockchip_usb2phy *priv = dev_get_priv(parent);
+ const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+ int ret;
+
+ ret = clk_enable(&priv->phyclk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable phyclk (ret=%d)\n", ret);
+ return ret;
+ }
+
+ if (phy->id == USB2PHY_PORT_OTG) {
+ property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true);
+ property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true);
+ } else if (phy->id == USB2PHY_PORT_HOST) {
+ property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true);
+ property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true);
+ }
+
+ return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+ struct udevice *parent = dev_get_parent(phy->dev);
+ struct rockchip_usb2phy *priv = dev_get_priv(parent);
+
+ clk_disable(&priv->phyclk);
+
+ return 0;
+}
+
+static int rockchip_usb2phy_of_xlate(struct phy *phy,
+ struct ofnode_phandle_args *args)
+{
+ const char *name = phy->dev->name;
+
+ if (!strcasecmp(name, "host-port"))
+ phy->id = USB2PHY_PORT_HOST;
+ else if (!strcasecmp(name, "otg-port"))
+ phy->id = USB2PHY_PORT_OTG;
+ else
+ dev_err(phy->dev, "improper %s device\n", name);
+
+ return 0;
+}
+
+static struct phy_ops rockchip_usb2phy_ops = {
+ .init = rockchip_usb2phy_init,
+ .exit = rockchip_usb2phy_exit,
+ .power_on = rockchip_usb2phy_power_on,
+ .power_off = rockchip_usb2phy_power_off,
+ .of_xlate = rockchip_usb2phy_of_xlate,
+};
+
+static int rockchip_usb2phy_probe(struct udevice *dev)
+{
+ struct rockchip_usb2phy *priv = dev_get_priv(dev);
+ const struct rockchip_usb2phy_cfg *phy_cfgs;
+ unsigned int reg;
+ int index, ret;
+
+ priv->reg_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ if (IS_ERR(priv->reg_base))
+ return PTR_ERR(priv->reg_base);
+
+ ret = dev_read_u32_index(dev, "reg", 1, ®);
+ if (ret) {
+ dev_err(dev, "failed to read reg property (ret = %d)\n", ret);
+ return ret;
+ }
+
+ phy_cfgs = (const struct rockchip_usb2phy_cfg *)
+ dev_get_driver_data(dev);
+ if (!phy_cfgs)
+ return -EINVAL;
+
+ /* find out a proper config which can be matched with dt. */
+ index = 0;
+ while (phy_cfgs[index].reg) {
+ if (phy_cfgs[index].reg == reg) {
+ priv->phy_cfg = &phy_cfgs[index];
+ break;
+ }
+
+ ++index;
+ }
+
+ if (!priv->phy_cfg) {
+ dev_err(dev, "failed find proper phy-cfg\n");
+ return -EINVAL;
+ }
+
+ ret = clk_get_by_name(dev, "phyclk", &priv->phyclk);
+ if (ret) {
+ dev_err(dev, "failed to get the phyclk (ret=%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_usb2phy_bind(struct udevice *dev)
+{
+ struct udevice *usb2phy_dev;
+ ofnode node;
+ const char *name;
+ int ret = 0;
+
+ dev_for_each_subnode(node, dev) {
+ if (!ofnode_valid(node)) {
+ dev_info(dev, "subnode %s not found\n", dev->name);
+ return -ENXIO;
+ }
+
+ name = ofnode_get_name(node);
+ dev_dbg(dev, "subnode %s\n", name);
+
+ ret = device_bind_driver_to_node(dev, "rockchip_usb2phy_port",
+ name, node, &usb2phy_dev);
+ if (ret) {
+ dev_err(dev,
+ "'%s' cannot bind 'rockchip_usb2phy_port'\n", name);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3399_usb2phy_cfgs[] = {
+ {
+ .reg = 0xe450,
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe454, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 },
+ .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 6, 6, 0, 1 },
+ .ls_det_st = { 0xe3e0, 6, 6, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 },
+ .utmi_ls = { 0xe2ac, 22, 21, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 }
+ }
+ },
+ },
+ {
+ .reg = 0xe460,
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe464, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
+ .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 11, 11, 0, 1 },
+ .ls_det_st = { 0xe3e0, 11, 11, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 },
+ .utmi_ls = { 0xe2ac, 26, 25, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct udevice_id rockchip_usb2phy_ids[] = {
+ {
+ .compatible = "rockchip,rk3399-usb2phy",
+ .data = (ulong)&rk3399_usb2phy_cfgs,
+ },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(rockchip_usb2phy_port) = {
+ .name = "rockchip_usb2phy_port",
+ .id = UCLASS_PHY,
+ .ops = &rockchip_usb2phy_ops,
+};
+
+U_BOOT_DRIVER(rockchip_usb2phy) = {
+ .name = "rockchip_usb2phy",
+ .id = UCLASS_PHY,
+ .of_match = rockchip_usb2phy_ids,
+ .probe = rockchip_usb2phy_probe,
+ .bind = rockchip_usb2phy_bind,
+ .priv_auto_alloc_size = sizeof(struct rockchip_usb2phy),
+};
Add Rockchip USB2PHY driver with initial support. This will help to use it for EHCI controller in host mode, and USB 3.0 controller in otg mode. More functionality like charge, vbus detection will add it in future changes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - update with Kconfig menu drivers/Makefile | 1 + drivers/phy/Kconfig | 1 + drivers/phy/rockchip/Kconfig | 14 + drivers/phy/rockchip/Makefile | 6 + drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 312 ++++++++++++++++++ 5 files changed, 334 insertions(+) create mode 100644 drivers/phy/rockchip/Kconfig create mode 100644 drivers/phy/rockchip/Makefile create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-usb2.c