diff mbox series

[v4,3/5] roc-rk3399-pc: Move leds setup in SPL

Message ID 20200618153948.218506-4-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series roc-rk3399-pc: Custom SPL init | expand

Commit Message

Jagan Teki June 18, 2020, 3:39 p.m. UTC 
roc-rk3399-pc has some specific requirements to support LEDS,
environment. board detection and etc prior to U-Boot proper.

So as of now SPL would be a better stage for these custom board
requirements to support unlike TPL. Adding few of these custom
requirements like LEDS in TPL would require extra code pulling
and also the size of TPL can grow.

So, this patch moves the leds code from TPL into SPL after relocation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
---
Changes for v4:
- none

 arch/arm/mach-rockchip/tpl.c                |  7 -------
 board/firefly/roc-pc-rk3399/Makefile        |  4 ++++
 board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 21 -------------------
 board/firefly/roc-pc-rk3399/spl.c           | 23 +++++++++++++++++++++
 configs/roc-pc-mezzanine-rk3399_defconfig   |  2 +-
 configs/roc-pc-rk3399_defconfig             |  2 +-
 6 files changed, 29 insertions(+), 30 deletions(-)
 create mode 100644 board/firefly/roc-pc-rk3399/spl.c

Comments

Kever Yang June 28, 2020, 2:50 a.m. UTC | #1 
On 2020/6/18 下午11:39, Jagan Teki wrote:
> roc-rk3399-pc has some specific requirements to support LEDS,
> environment. board detection and etc prior to U-Boot proper.
>
> So as of now SPL would be a better stage for these custom board
> requirements to support unlike TPL. Adding few of these custom
> requirements like LEDS in TPL would require extra code pulling
> and also the size of TPL can grow.
>
> So, this patch moves the leds code from TPL into SPL after relocation.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
> ---
> Changes for v4:
> - none
>
>   arch/arm/mach-rockchip/tpl.c                |  7 -------
>   board/firefly/roc-pc-rk3399/Makefile        |  4 ++++
>   board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 21 -------------------
>   board/firefly/roc-pc-rk3399/spl.c           | 23 +++++++++++++++++++++
>   configs/roc-pc-mezzanine-rk3399_defconfig   |  2 +-
>   configs/roc-pc-rk3399_defconfig             |  2 +-
>   6 files changed, 29 insertions(+), 30 deletions(-)
>   create mode 100644 board/firefly/roc-pc-rk3399/spl.c
>
> diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c
> index 88f80b05a9..cc908e1b0e 100644
> --- a/arch/arm/mach-rockchip/tpl.c
> +++ b/arch/arm/mach-rockchip/tpl.c
> @@ -43,18 +43,11 @@ __weak void rockchip_stimer_init(void)
>   	       TIMER_CONTROL_REG);
>   }
>   
> -__weak int board_early_init_f(void)
> -{
> -	return 0;
> -}
> -
>   void board_init_f(ulong dummy)
>   {
>   	struct udevice *dev;
>   	int ret;
>   
> -	board_early_init_f();
> -
>   #if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT)
>   	/*
>   	 * Debug UART can be used from here if required:
> diff --git a/board/firefly/roc-pc-rk3399/Makefile b/board/firefly/roc-pc-rk3399/Makefile
> index 29c79b25d7..3a9c4c744d 100644
> --- a/board/firefly/roc-pc-rk3399/Makefile
> +++ b/board/firefly/roc-pc-rk3399/Makefile
> @@ -4,4 +4,8 @@
>   # SPDX-License-Identifier:     GPL-2.0+
>   #
>   
> +ifdef CONFIG_SPL_BUILD
> +obj-y	+= spl.o
> +else
>   obj-y	+= roc-pc-rk3399.o
> +endif
> diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
> index 7c3a803654..581cdcd3b0 100644
> --- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
> +++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
> @@ -6,13 +6,8 @@
>   #include <common.h>
>   #include <dm.h>
>   #include <log.h>
> -#include <asm/arch-rockchip/periph.h>
>   #include <power/regulator.h>
> -#include <spl_gpio.h>
> -#include <asm/io.h>
> -#include <asm/arch-rockchip/gpio.h>

It will be better to use CONFIG_SPL_BUILD for SPL code in this file 
instead of

add a new file.

Many other boards will follow up to add this new file, I don't think 
this is a good idea.


Thanks,

- Kever

>   
> -#ifndef CONFIG_SPL_BUILD
>   int board_early_init_f(void)
>   {
>   	struct udevice *regulator;
> @@ -30,19 +25,3 @@ int board_early_init_f(void)
>   out:
>   	return 0;
>   }
> -#endif
> -
> -#if defined(CONFIG_TPL_BUILD)
> -
> -#define GPIO0_BASE      0xff720000
> -
> -int board_early_init_f(void)
> -{
> -	struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
> -
> -	/* Turn on red LED, indicating full power mode */
> -	spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
> -
> -	return 0;
> -}
> -#endif
> diff --git a/board/firefly/roc-pc-rk3399/spl.c b/board/firefly/roc-pc-rk3399/spl.c
> new file mode 100644
> index 0000000000..a7664c6b86
> --- /dev/null
> +++ b/board/firefly/roc-pc-rk3399/spl.c
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2020 Amarula Solutions(India)
> + */
> +
> +#include <common.h>
> +#include <spl_gpio.h>
> +#include <asm/arch-rockchip/gpio.h>
> +
> +#define GPIO0_BASE		0xff720000
> +
> +static void led_setup(void)
> +{
> +	struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
> +
> +	/* Turn on red LED, indicating full power mode */
> +	spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
> +}
> +
> +void rk_spl_board_init(void)
> +{
> +	led_setup();
> +}
> diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
> index 595f052cb7..060b4bfecf 100644
> --- a/configs/roc-pc-mezzanine-rk3399_defconfig
> +++ b/configs/roc-pc-mezzanine-rk3399_defconfig
> @@ -1,6 +1,7 @@
>   CONFIG_ARM=y
>   CONFIG_ARCH_ROCKCHIP=y
>   CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_GPIO_SUPPORT=y
>   CONFIG_ENV_SIZE=0x8000
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_ENV_SECT_SIZE=0x1000
> @@ -20,7 +21,6 @@ CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>   CONFIG_SPL_SPI_LOAD=y
>   CONFIG_TPL=y
> -CONFIG_TPL_GPIO_SUPPORT=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> index 1c4db3443f..9897a52cd8 100644
> --- a/configs/roc-pc-rk3399_defconfig
> +++ b/configs/roc-pc-rk3399_defconfig
> @@ -1,6 +1,7 @@
>   CONFIG_ARM=y
>   CONFIG_ARCH_ROCKCHIP=y
>   CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_GPIO_SUPPORT=y
>   CONFIG_ENV_SIZE=0x8000
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_ENV_SECT_SIZE=0x1000
> @@ -20,7 +21,6 @@ CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>   CONFIG_SPL_SPI_LOAD=y
>   CONFIG_TPL=y
> -CONFIG_TPL_GPIO_SUPPORT=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
diff mbox series

Patch

diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c
index 88f80b05a9..cc908e1b0e 100644
--- a/arch/arm/mach-rockchip/tpl.c
+++ b/arch/arm/mach-rockchip/tpl.c
@@ -43,18 +43,11 @@  __weak void rockchip_stimer_init(void)
 	       TIMER_CONTROL_REG);
 }
 
-__weak int board_early_init_f(void)
-{
-	return 0;
-}
-
 void board_init_f(ulong dummy)
 {
 	struct udevice *dev;
 	int ret;
 
-	board_early_init_f();
-
 #if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT)
 	/*
 	 * Debug UART can be used from here if required:
diff --git a/board/firefly/roc-pc-rk3399/Makefile b/board/firefly/roc-pc-rk3399/Makefile
index 29c79b25d7..3a9c4c744d 100644
--- a/board/firefly/roc-pc-rk3399/Makefile
+++ b/board/firefly/roc-pc-rk3399/Makefile
@@ -4,4 +4,8 @@ 
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
+ifdef CONFIG_SPL_BUILD
+obj-y	+= spl.o
+else
 obj-y	+= roc-pc-rk3399.o
+endif
diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
index 7c3a803654..581cdcd3b0 100644
--- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
+++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
@@ -6,13 +6,8 @@ 
 #include <common.h>
 #include <dm.h>
 #include <log.h>
-#include <asm/arch-rockchip/periph.h>
 #include <power/regulator.h>
-#include <spl_gpio.h>
-#include <asm/io.h>
-#include <asm/arch-rockchip/gpio.h>
 
-#ifndef CONFIG_SPL_BUILD
 int board_early_init_f(void)
 {
 	struct udevice *regulator;
@@ -30,19 +25,3 @@  int board_early_init_f(void)
 out:
 	return 0;
 }
-#endif
-
-#if defined(CONFIG_TPL_BUILD)
-
-#define GPIO0_BASE      0xff720000
-
-int board_early_init_f(void)
-{
-	struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
-
-	/* Turn on red LED, indicating full power mode */
-	spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
-
-	return 0;
-}
-#endif
diff --git a/board/firefly/roc-pc-rk3399/spl.c b/board/firefly/roc-pc-rk3399/spl.c
new file mode 100644
index 0000000000..a7664c6b86
--- /dev/null
+++ b/board/firefly/roc-pc-rk3399/spl.c
@@ -0,0 +1,23 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include <common.h>
+#include <spl_gpio.h>
+#include <asm/arch-rockchip/gpio.h>
+
+#define GPIO0_BASE		0xff720000
+
+static void led_setup(void)
+{
+	struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
+
+	/* Turn on red LED, indicating full power mode */
+	spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
+}
+
+void rk_spl_board_init(void)
+{
+	led_setup();
+}
diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
index 595f052cb7..060b4bfecf 100644
--- a/configs/roc-pc-mezzanine-rk3399_defconfig
+++ b/configs/roc-pc-mezzanine-rk3399_defconfig
@@ -1,6 +1,7 @@ 
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_ENV_SECT_SIZE=0x1000
@@ -20,7 +21,6 @@  CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
-CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index 1c4db3443f..9897a52cd8 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -1,6 +1,7 @@ 
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_ENV_SECT_SIZE=0x1000
@@ -20,7 +21,6 @@  CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
-CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y