@@ -212,9 +212,6 @@ struct hantro_dev {
* @ctrl_handler: Control handler used to register controls.
* @jpeg_quality: User-specified JPEG compression quality.
*
- * @buf_finish: Buffer finish. This depends on encoder or decoder
- * context, and it's called right before
- * calling v4l2_m2m_job_finish.
* @codec_ops: Set of operations related to codec mode.
* @postproc: Post-processing context.
* @jpeg_enc: JPEG-encoding context.
@@ -237,10 +234,6 @@ struct hantro_ctx {
struct v4l2_ctrl_handler ctrl_handler;
int jpeg_quality;
- int (*buf_finish)(struct hantro_ctx *ctx,
- struct vb2_buffer *buf,
- unsigned int bytesused);
-
const struct hantro_codec_ops *codec_ops;
struct hantro_postproc_ctx postproc;
@@ -56,37 +56,12 @@ dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)
return hantro_get_dec_buf_addr(ctx, buf);
}
-static int
-hantro_enc_buf_finish(struct hantro_ctx *ctx, struct vb2_buffer *buf,
- unsigned int bytesused)
-{
- size_t avail_size;
-
- avail_size = vb2_plane_size(buf, 0) - ctx->vpu_dst_fmt->header_size;
- if (bytesused > avail_size)
- return -EINVAL;
- /*
- * The bounce buffer is only for the JPEG encoder.
- * TODO: Rework the JPEG encoder to eliminate the need
- * for a bounce buffer.
- */
- if (ctx->jpeg_enc.bounce_buffer.cpu) {
- memcpy(vb2_plane_vaddr(buf, 0) +
- ctx->vpu_dst_fmt->header_size,
- ctx->jpeg_enc.bounce_buffer.cpu, bytesused);
- }
- buf->planes[0].bytesused =
- ctx->vpu_dst_fmt->header_size + bytesused;
- return 0;
-}
-
static void hantro_job_finish(struct hantro_dev *vpu,
struct hantro_ctx *ctx,
unsigned int bytesused,
enum vb2_buffer_state result)
{
struct vb2_v4l2_buffer *src, *dst;
- int ret;
pm_runtime_mark_last_busy(vpu->dev);
pm_runtime_put_autosuspend(vpu->dev);
@@ -103,12 +78,6 @@ static void hantro_job_finish(struct hantro_dev *vpu,
src->sequence = ctx->sequence_out++;
dst->sequence = ctx->sequence_cap++;
- if (ctx->buf_finish) {
- ret = ctx->buf_finish(ctx, &dst->vb2_buf, bytesused);
- if (ret)
- result = VB2_BUF_STATE_ERROR;
- }
-
v4l2_m2m_buf_done_and_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx,
result);
}
@@ -124,8 +93,11 @@ void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
* the timeout expired. The watchdog is running,
* and will take care of finishing the job.
*/
- if (cancel_delayed_work(&vpu->watchdog_work))
+ if (cancel_delayed_work(&vpu->watchdog_work)) {
+ if (result == VB2_BUF_STATE_DONE && ctx->codec_ops->done)
+ ctx->codec_ops->done(ctx);
hantro_job_finish(vpu, ctx, bytesused, result);
+ }
}
void hantro_watchdog(struct work_struct *work)
@@ -419,7 +391,6 @@ static int hantro_open(struct file *filp)
ctx->dev = vpu;
if (func->id == MEDIA_ENT_F_PROC_VIDEO_ENCODER) {
allowed_codecs = vpu->variant->codec & HANTRO_ENCODERS;
- ctx->buf_finish = hantro_enc_buf_finish;
ctx->is_encoder = true;
} else if (func->id == MEDIA_ENT_F_PROC_VIDEO_DECODER) {
allowed_codecs = vpu->variant->codec & HANTRO_DECODERS;
@@ -137,3 +137,20 @@ void hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx)
vepu_write(vpu, reg, H1_REG_ENC_CTRL);
}
+
+void hantro_jpeg_enc_done(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+ u32 bytesused = vepu_read(vpu, H1_REG_STR_BUF_LIMIT) / 8;
+ struct vb2_v4l2_buffer *dst_buf = hantro_get_dst_buf(ctx);
+
+ /*
+ * TODO: Rework the JPEG encoder to eliminate the need
+ * for a bounce buffer.
+ */
+ memcpy(vb2_plane_vaddr(&dst_buf->vb2_buf, 0) +
+ ctx->vpu_dst_fmt->header_size,
+ ctx->jpeg_enc.bounce_buffer.cpu, bytesused);
+ vb2_set_plane_payload(&dst_buf->vb2_buf, 0,
+ ctx->vpu_dst_fmt->header_size + bytesused);
+}
@@ -138,7 +138,7 @@ struct hantro_codec_ops {
int (*init)(struct hantro_ctx *ctx);
void (*exit)(struct hantro_ctx *ctx);
void (*run)(struct hantro_ctx *ctx);
- void (*done)(struct hantro_ctx *ctx, enum vb2_buffer_state);
+ void (*done)(struct hantro_ctx *ctx);
void (*reset)(struct hantro_ctx *ctx);
};
@@ -172,6 +172,7 @@ void hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx);
void rk3399_vpu_jpeg_enc_run(struct hantro_ctx *ctx);
int hantro_jpeg_enc_init(struct hantro_ctx *ctx);
void hantro_jpeg_enc_exit(struct hantro_ctx *ctx);
+void hantro_jpeg_enc_done(struct hantro_ctx *ctx);
dma_addr_t hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
unsigned int dpb_idx);
@@ -180,6 +180,7 @@ static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
.run = hantro_h1_jpeg_enc_run,
.reset = rk3288_vpu_enc_reset,
.init = hantro_jpeg_enc_init,
+ .done = hantro_jpeg_enc_done,
.exit = hantro_jpeg_enc_exit,
},
[HANTRO_MODE_H264_DEC] = {
hantro_enc_buf_finish is used only for JPEG, and so should be moved to JPEG codec_ops.done. This cleanup is also taking care of addressing a subtle issue: checking the non-NULL bounce buffer using ctx->jpeg_enc, which is a member of a union is confusing and error-prone. Note that the issue is currently innocuous because an encoder context only supports JPEG. The codec_ops.done has an argument that codec-specific code shouldn't need, so drop that as well. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> --- drivers/staging/media/hantro/hantro.h | 7 ---- drivers/staging/media/hantro/hantro_drv.c | 37 ++----------------- .../staging/media/hantro/hantro_h1_jpeg_enc.c | 17 +++++++++ drivers/staging/media/hantro/hantro_hw.h | 3 +- drivers/staging/media/hantro/rk3288_vpu_hw.c | 1 + 5 files changed, 24 insertions(+), 41 deletions(-)