| Message ID | 20210421200445.32977-2-ezequiel@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible | expand |
On 21/04/2021 22:04, Ezequiel Garcia wrote: > From: Finley Xiao <finley.xiao@rock-chips.com> > > The RK3568 SoCs have two Temperature Sensors, channel 0 is for CPU, > channel 1 is for GPU. > > Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> > Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> > --- > drivers/thermal/rockchip_thermal.c | 107 +++++++++++++++++++++++++++++ > 1 file changed, 107 insertions(+) > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c > index aa9e0e31ef98..8e26f2685003 100644 > --- a/drivers/thermal/rockchip_thermal.c > +++ b/drivers/thermal/rockchip_thermal.c > @@ -211,7 +211,11 @@ struct rockchip_thermal_data { > #define TSADCV3_AUTO_PERIOD_TIME 1875 /* 2.5ms */ > #define TSADCV3_AUTO_PERIOD_HT_TIME 1875 /* 2.5ms */ > > +#define TSADCV5_AUTO_PERIOD_TIME 1622 /* 2.5ms */ > +#define TSADCV5_AUTO_PERIOD_HT_TIME 1622 /* 2.5ms */ > + > #define TSADCV2_USER_INTER_PD_SOC 0x340 /* 13 clocks */ > +#define TSADCV5_USER_INTER_PD_SOC 0xfc0 /* 97us, at least 90us */ > > #define GRF_SARADC_TESTBIT 0x0e644 > #define GRF_TSADC_TESTBIT_L 0x0e648 > @@ -219,6 +223,12 @@ struct rockchip_thermal_data { > > #define PX30_GRF_SOC_CON2 0x0408 > > +#define RK3568_GRF_TSADC_CON 0x0600 > +#define RK3568_GRF_TSADC_ANA_REG0 (0x10001 << 0) > +#define RK3568_GRF_TSADC_ANA_REG1 (0x10001 << 1) > +#define RK3568_GRF_TSADC_ANA_REG2 (0x10001 << 2) > +#define RK3568_GRF_TSADC_TSEN (0x10001 << 8) > + > #define GRF_SARADC_TESTBIT_ON (0x10001 << 2) > #define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2) > #define GRF_TSADC_VCM_EN_L (0x10001 << 7) > @@ -474,6 +484,45 @@ static const struct tsadc_table rk3399_code_table[] = { > {TSADCV3_DATA_MASK, 125000}, > }; > > +static const struct tsadc_table rk3568_code_table[] = { > + {0, -40000}, > + {1584, -40000}, > + {1620, -35000}, > + {1652, -30000}, > + {1688, -25000}, > + {1720, -20000}, > + {1756, -15000}, > + {1788, -10000}, > + {1824, -5000}, > + {1856, 0}, > + {1892, 5000}, > + {1924, 10000}, > + {1956, 15000}, > + {1992, 20000}, > + {2024, 25000}, > + {2060, 30000}, > + {2092, 35000}, > + {2128, 40000}, > + {2160, 45000}, > + {2196, 50000}, > + {2228, 55000}, > + {2264, 60000}, > + {2300, 65000}, > + {2332, 70000}, > + {2368, 75000}, > + {2400, 80000}, > + {2436, 85000}, > + {2468, 90000}, > + {2500, 95000}, > + {2536, 100000}, > + {2572, 105000}, > + {2604, 110000}, > + {2636, 115000}, > + {2672, 120000}, > + {2704, 125000}, > + {TSADCV2_DATA_MASK, 125000}, > +}; > + > static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table, > int temp) > { > @@ -701,6 +750,35 @@ static void rk_tsadcv4_initialize(struct regmap *grf, void __iomem *regs, > regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV); > } > > +static void rk_tsadcv7_initialize(struct regmap *grf, void __iomem *regs, > + enum tshut_polarity tshut_polarity) > +{ > + writel_relaxed(TSADCV5_USER_INTER_PD_SOC, regs + TSADCV2_USER_CON); > + writel_relaxed(TSADCV5_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD); > + writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT, > + regs + TSADCV2_HIGHT_INT_DEBOUNCE); > + writel_relaxed(TSADCV5_AUTO_PERIOD_HT_TIME, > + regs + TSADCV2_AUTO_PERIOD_HT); > + writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, > + regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); > + > + if (tshut_polarity == TSHUT_HIGH_ACTIVE) > + writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH, > + regs + TSADCV2_AUTO_CON); > + else > + writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH, > + regs + TSADCV2_AUTO_CON); > + > + if (!IS_ERR(grf)) { That is strange to do this check with a parameter. Is the sensor functional if the regmap failed ? > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_TSEN); > + udelay(15); > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG0); > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG1); > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG2); > + usleep_range(100, 200); Is it possible to put a comment on why these delays are necessary (if you have the info) ? > + } > +} > + > static void rk_tsadcv2_irq_ack(void __iomem *regs) > { > u32 val; > @@ -1027,6 +1105,31 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = { > }, > }; > > +static const struct rockchip_tsadc_chip rk3568_tsadc_data = { > + .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */ > + .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */ > + .chn_num = 2, /* two channels for tsadc */ > + > + .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */ > + .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */ > + .tshut_temp = 95000, > + > + .initialize = rk_tsadcv7_initialize, > + .irq_ack = rk_tsadcv3_irq_ack, > + .control = rk_tsadcv3_control, > + .get_temp = rk_tsadcv2_get_temp, > + .set_alarm_temp = rk_tsadcv2_alarm_temp, > + .set_tshut_temp = rk_tsadcv2_tshut_temp, > + .set_tshut_mode = rk_tsadcv2_tshut_mode, > + > + .table = { > + .id = rk3568_code_table, > + .length = ARRAY_SIZE(rk3568_code_table), > + .data_mask = TSADCV2_DATA_MASK, > + .mode = ADC_INCREMENT, > + }, > +}; > + > static const struct of_device_id of_rockchip_thermal_match[] = { > { .compatible = "rockchip,px30-tsadc", > .data = (void *)&px30_tsadc_data, > @@ -1059,6 +1162,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = { > .compatible = "rockchip,rk3399-tsadc", > .data = (void *)&rk3399_tsadc_data, > }, > + { > + .compatible = "rockchip,rk3568-tsadc", > + .data = (void *)&rk3568_tsadc_data, > + }, > { /* end */ }, > }; > MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match); >
Hi Daniel, Thanks for the review. On Sat, 2021-04-24 at 16:14 +0200, Daniel Lezcano wrote: > On 21/04/2021 22:04, Ezequiel Garcia wrote: > > From: Finley Xiao <finley.xiao@rock-chips.com> > > > > The RK3568 SoCs have two Temperature Sensors, channel 0 is for CPU, > > channel 1 is for GPU. > > > > Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> > > Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> > > --- > > drivers/thermal/rockchip_thermal.c | 107 +++++++++++++++++++++++++++++ > > 1 file changed, 107 insertions(+) > > > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c > > index aa9e0e31ef98..8e26f2685003 100644 > > --- a/drivers/thermal/rockchip_thermal.c > > +++ b/drivers/thermal/rockchip_thermal.c > > @@ -211,7 +211,11 @@ struct rockchip_thermal_data { > > #define TSADCV3_AUTO_PERIOD_TIME 1875 /* 2.5ms */ > > #define TSADCV3_AUTO_PERIOD_HT_TIME 1875 /* 2.5ms */ > > > > +#define TSADCV5_AUTO_PERIOD_TIME 1622 /* 2.5ms */ > > +#define TSADCV5_AUTO_PERIOD_HT_TIME 1622 /* 2.5ms */ > > + > > #define TSADCV2_USER_INTER_PD_SOC 0x340 /* 13 clocks */ > > +#define TSADCV5_USER_INTER_PD_SOC 0xfc0 /* 97us, at least 90us */ > > > > #define GRF_SARADC_TESTBIT 0x0e644 > > #define GRF_TSADC_TESTBIT_L 0x0e648 > > @@ -219,6 +223,12 @@ struct rockchip_thermal_data { > > > > #define PX30_GRF_SOC_CON2 0x0408 > > > > +#define RK3568_GRF_TSADC_CON 0x0600 > > +#define RK3568_GRF_TSADC_ANA_REG0 (0x10001 << 0) > > +#define RK3568_GRF_TSADC_ANA_REG1 (0x10001 << 1) > > +#define RK3568_GRF_TSADC_ANA_REG2 (0x10001 << 2) > > +#define RK3568_GRF_TSADC_TSEN (0x10001 << 8) > > + > > #define GRF_SARADC_TESTBIT_ON (0x10001 << 2) > > #define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2) > > #define GRF_TSADC_VCM_EN_L (0x10001 << 7) > > @@ -474,6 +484,45 @@ static const struct tsadc_table rk3399_code_table[] = { > > {TSADCV3_DATA_MASK, 125000}, > > }; > > > > +static const struct tsadc_table rk3568_code_table[] = { > > + {0, -40000}, > > + {1584, -40000}, > > + {1620, -35000}, > > + {1652, -30000}, > > + {1688, -25000}, > > + {1720, -20000}, > > + {1756, -15000}, > > + {1788, -10000}, > > + {1824, -5000}, > > + {1856, 0}, > > + {1892, 5000}, > > + {1924, 10000}, > > + {1956, 15000}, > > + {1992, 20000}, > > + {2024, 25000}, > > + {2060, 30000}, > > + {2092, 35000}, > > + {2128, 40000}, > > + {2160, 45000}, > > + {2196, 50000}, > > + {2228, 55000}, > > + {2264, 60000}, > > + {2300, 65000}, > > + {2332, 70000}, > > + {2368, 75000}, > > + {2400, 80000}, > > + {2436, 85000}, > > + {2468, 90000}, > > + {2500, 95000}, > > + {2536, 100000}, > > + {2572, 105000}, > > + {2604, 110000}, > > + {2636, 115000}, > > + {2672, 120000}, > > + {2704, 125000}, > > + {TSADCV2_DATA_MASK, 125000}, > > +}; > > + > > static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table, > > int temp) > > { > > @@ -701,6 +750,35 @@ static void rk_tsadcv4_initialize(struct regmap *grf, void __iomem *regs, > > regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV); > > } > > > > +static void rk_tsadcv7_initialize(struct regmap *grf, void __iomem *regs, > > + enum tshut_polarity tshut_polarity) > > +{ > > + writel_relaxed(TSADCV5_USER_INTER_PD_SOC, regs + TSADCV2_USER_CON); > > + writel_relaxed(TSADCV5_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD); > > + writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT, > > + regs + TSADCV2_HIGHT_INT_DEBOUNCE); > > + writel_relaxed(TSADCV5_AUTO_PERIOD_HT_TIME, > > + regs + TSADCV2_AUTO_PERIOD_HT); > > + writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, > > + regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); > > + > > + if (tshut_polarity == TSHUT_HIGH_ACTIVE) > > + writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH, > > + regs + TSADCV2_AUTO_CON); > > + else > > + writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH, > > + regs + TSADCV2_AUTO_CON); > > + > > + if (!IS_ERR(grf)) { > > That is strange to do this check with a parameter. Is the sensor > functional if the regmap failed ? > Indeed, it seems it's optional. The same check is in rk_tsadcv3_initialize, and also in rockchip_configure_from_dt(): /* The tsadc wont to handle the error in here since some SoCs didn't * need this property. */ thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); if (IS_ERR(thermal->grf)) dev_warn(dev, "Missing rockchip,grf property\n"); But I completely agree it looks strange without a comment, might be better to add one. > > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_TSEN); > > + udelay(15); > > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG0); > > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG1); > > + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG2); > > + usleep_range(100, 200); > > Is it possible to put a comment on why these delays are necessary (if > you have the info) ? > Sure, I'll add a comment there. It is described in RK3568 Part1 TRM, section 18.5.2. Thanks, Ezequiel
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index aa9e0e31ef98..8e26f2685003 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -211,7 +211,11 @@ struct rockchip_thermal_data { #define TSADCV3_AUTO_PERIOD_TIME 1875 /* 2.5ms */ #define TSADCV3_AUTO_PERIOD_HT_TIME 1875 /* 2.5ms */ +#define TSADCV5_AUTO_PERIOD_TIME 1622 /* 2.5ms */ +#define TSADCV5_AUTO_PERIOD_HT_TIME 1622 /* 2.5ms */ + #define TSADCV2_USER_INTER_PD_SOC 0x340 /* 13 clocks */ +#define TSADCV5_USER_INTER_PD_SOC 0xfc0 /* 97us, at least 90us */ #define GRF_SARADC_TESTBIT 0x0e644 #define GRF_TSADC_TESTBIT_L 0x0e648 @@ -219,6 +223,12 @@ struct rockchip_thermal_data { #define PX30_GRF_SOC_CON2 0x0408 +#define RK3568_GRF_TSADC_CON 0x0600 +#define RK3568_GRF_TSADC_ANA_REG0 (0x10001 << 0) +#define RK3568_GRF_TSADC_ANA_REG1 (0x10001 << 1) +#define RK3568_GRF_TSADC_ANA_REG2 (0x10001 << 2) +#define RK3568_GRF_TSADC_TSEN (0x10001 << 8) + #define GRF_SARADC_TESTBIT_ON (0x10001 << 2) #define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2) #define GRF_TSADC_VCM_EN_L (0x10001 << 7) @@ -474,6 +484,45 @@ static const struct tsadc_table rk3399_code_table[] = { {TSADCV3_DATA_MASK, 125000}, }; +static const struct tsadc_table rk3568_code_table[] = { + {0, -40000}, + {1584, -40000}, + {1620, -35000}, + {1652, -30000}, + {1688, -25000}, + {1720, -20000}, + {1756, -15000}, + {1788, -10000}, + {1824, -5000}, + {1856, 0}, + {1892, 5000}, + {1924, 10000}, + {1956, 15000}, + {1992, 20000}, + {2024, 25000}, + {2060, 30000}, + {2092, 35000}, + {2128, 40000}, + {2160, 45000}, + {2196, 50000}, + {2228, 55000}, + {2264, 60000}, + {2300, 65000}, + {2332, 70000}, + {2368, 75000}, + {2400, 80000}, + {2436, 85000}, + {2468, 90000}, + {2500, 95000}, + {2536, 100000}, + {2572, 105000}, + {2604, 110000}, + {2636, 115000}, + {2672, 120000}, + {2704, 125000}, + {TSADCV2_DATA_MASK, 125000}, +}; + static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table, int temp) { @@ -701,6 +750,35 @@ static void rk_tsadcv4_initialize(struct regmap *grf, void __iomem *regs, regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV); } +static void rk_tsadcv7_initialize(struct regmap *grf, void __iomem *regs, + enum tshut_polarity tshut_polarity) +{ + writel_relaxed(TSADCV5_USER_INTER_PD_SOC, regs + TSADCV2_USER_CON); + writel_relaxed(TSADCV5_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD); + writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_INT_DEBOUNCE); + writel_relaxed(TSADCV5_AUTO_PERIOD_HT_TIME, + regs + TSADCV2_AUTO_PERIOD_HT); + writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); + + if (tshut_polarity == TSHUT_HIGH_ACTIVE) + writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH, + regs + TSADCV2_AUTO_CON); + else + writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH, + regs + TSADCV2_AUTO_CON); + + if (!IS_ERR(grf)) { + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_TSEN); + udelay(15); + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG0); + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG1); + regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG2); + usleep_range(100, 200); + } +} + static void rk_tsadcv2_irq_ack(void __iomem *regs) { u32 val; @@ -1027,6 +1105,31 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = { }, }; +static const struct rockchip_tsadc_chip rk3568_tsadc_data = { + .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */ + .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */ + .chn_num = 2, /* two channels for tsadc */ + + .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */ + .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */ + .tshut_temp = 95000, + + .initialize = rk_tsadcv7_initialize, + .irq_ack = rk_tsadcv3_irq_ack, + .control = rk_tsadcv3_control, + .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, + .set_tshut_temp = rk_tsadcv2_tshut_temp, + .set_tshut_mode = rk_tsadcv2_tshut_mode, + + .table = { + .id = rk3568_code_table, + .length = ARRAY_SIZE(rk3568_code_table), + .data_mask = TSADCV2_DATA_MASK, + .mode = ADC_INCREMENT, + }, +}; + static const struct of_device_id of_rockchip_thermal_match[] = { { .compatible = "rockchip,px30-tsadc", .data = (void *)&px30_tsadc_data, @@ -1059,6 +1162,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = { .compatible = "rockchip,rk3399-tsadc", .data = (void *)&rk3399_tsadc_data, }, + { + .compatible = "rockchip,rk3568-tsadc", + .data = (void *)&rk3568_tsadc_data, + }, { /* end */ }, }; MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);