@@ -51,13 +51,11 @@
#define RK3399_PMUGRF_CON0_VSEL BIT(8)
#define RK3399_PMUGRF_VSEL_SUPPLY_NUM 9
-struct rockchip_iodomain;
+#define RK3568_PMU_GRF_IO_VSEL0 (0x0140)
+#define RK3568_PMU_GRF_IO_VSEL1 (0x0144)
+#define RK3568_PMU_GRF_IO_VSEL2 (0x0148)
-struct rockchip_iodomain_soc_data {
- int grf_offset;
- const char *supply_names[MAX_SUPPLIES];
- void (*init)(struct rockchip_iodomain *iod);
-};
+struct rockchip_iodomain;
struct rockchip_iodomain_supply {
struct rockchip_iodomain *iod;
@@ -66,13 +64,62 @@ struct rockchip_iodomain_supply {
int idx;
};
+struct rockchip_iodomain_soc_data {
+ int grf_offset;
+ const char *supply_names[MAX_SUPPLIES];
+ void (*init)(struct rockchip_iodomain *iod);
+ int (*write)(struct rockchip_iodomain_supply *supply, int uV);
+};
+
struct rockchip_iodomain {
struct device *dev;
struct regmap *grf;
const struct rockchip_iodomain_soc_data *soc_data;
struct rockchip_iodomain_supply supplies[MAX_SUPPLIES];
+ int (*write)(struct rockchip_iodomain_supply *supply, int uV);
};
+static int rk3568_iodomain_write(struct rockchip_iodomain_supply *supply, int uV)
+{
+ struct rockchip_iodomain *iod = supply->iod;
+ u32 is_3v3 = uV > MAX_VOLTAGE_1_8;
+ u32 val0, val1;
+ int b;
+
+ switch (supply->idx) {
+ case 0: /* pmuio1 */
+ break;
+ case 1: /* pmuio2 */
+ b = supply->idx;
+ val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+ b = supply->idx + 4;
+ val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val0);
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val1);
+ break;
+ case 3: /* vccio2 */
+ break;
+ case 2: /* vccio1 */
+ case 4: /* vccio3 */
+ case 5: /* vccio4 */
+ case 6: /* vccio5 */
+ case 7: /* vccio6 */
+ case 8: /* vccio7 */
+ b = supply->idx - 1;
+ val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+ val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL0, val0);
+ regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL1, val1);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ return 0;
+}
+
static int rockchip_iodomain_write(struct rockchip_iodomain_supply *supply,
int uV)
{
@@ -136,7 +183,7 @@ static int rockchip_iodomain_notify(struct notifier_block *nb,
return NOTIFY_BAD;
}
- ret = rockchip_iodomain_write(supply, uV);
+ ret = supply->iod->write(supply, uV);
if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
return NOTIFY_BAD;
@@ -398,6 +445,22 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = {
.init = rk3399_pmu_iodomain_init,
};
+static const struct rockchip_iodomain_soc_data soc_data_rk3568_pmu = {
+ .grf_offset = 0x140,
+ .supply_names = {
+ "pmuio1",
+ "pmuio2",
+ "vccio1",
+ "vccio2",
+ "vccio3",
+ "vccio4",
+ "vccio5",
+ "vccio6",
+ "vccio7",
+ },
+ .write = rk3568_iodomain_write,
+};
+
static const struct rockchip_iodomain_soc_data soc_data_rv1108 = {
.grf_offset = 0x404,
.supply_names = {
@@ -469,6 +532,10 @@ static const struct of_device_id rockchip_iodomain_match[] = {
.compatible = "rockchip,rk3399-pmu-io-voltage-domain",
.data = &soc_data_rk3399_pmu
},
+ {
+ .compatible = "rockchip,rk3568-pmu-io-voltage-domain",
+ .data = &soc_data_rk3568_pmu
+ },
{
.compatible = "rockchip,rv1108-io-voltage-domain",
.data = &soc_data_rv1108
@@ -502,6 +569,11 @@ static int rockchip_iodomain_probe(struct platform_device *pdev)
match = of_match_node(rockchip_iodomain_match, np);
iod->soc_data = match->data;
+ if (iod->soc_data->write)
+ iod->write = iod->soc_data->write;
+ else
+ iod->write = rockchip_iodomain_write;
+
parent = pdev->dev.parent;
if (parent && parent->of_node) {
iod->grf = syscon_node_to_regmap(parent->of_node);
@@ -562,7 +634,7 @@ static int rockchip_iodomain_probe(struct platform_device *pdev)
supply->reg = reg;
supply->nb.notifier_call = rockchip_iodomain_notify;
- ret = rockchip_iodomain_write(supply, uV);
+ ret = iod->write(supply, uV);
if (ret) {
supply->reg = NULL;
goto unreg_notify;
The io-domain registers on RK3568 SoCs have three separated bits to enable/disable the 1.8v/2.5v/3.3v power. This patch make the write to be a operation, allow rk3568 uses a private register set function. Since the 2.5v is not used on RK3568, so the driver only set 1.8v [enable] + 3.3v [disable] for 1.8v mode 1.8v [disable] + 3.3v [enable] for 3.3v mode There is not register order requirement which has been cleared by our IC team. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> --- v2: - none drivers/soc/rockchip/io-domain.c | 88 +++++++++++++++++++++++++++++--- 1 file changed, 80 insertions(+), 8 deletions(-)